Danfoss AK-UI55 Info Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Danfoss AK-UI55 Info Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
084R8059
A N324531493969en-000101
Identification
Dimensions
Mounting
Connection
AK-UI cable, 3 m: 084B4078
AK-UI cable, 6 m: 084B4079
RJ 12
t
amb
= 0 – 55 °C
32 – 130 °F
Non condensing
L max. = 100 m
NEMA4
IP65
0.5 - 3.0 mm
L
1
+ L
2
: max. = 100 m
L
1
L
2
AK-UI55 Info
Lights up in event of:
Energy optimization
Cooling
Defrosting
Fan operation
Lights up in event of:
Alarm
The display can give the following messages:
-d- Defrost is in progress
Err The temperature cannot be displayed due to a sensor error
Fan Appliance cleaning has been initiated. The fans are running
OFF Appliance cleaning is activated and the appliance can be cleaned
OFF The main switch is set to Off
SEr The main switch is set to service / manual operation
CO Flashes: Will display in event of a refrigerant leakage alarm, but only if the refrigerant is set up for CO
With start-up /connection to a
controller, the display will “light up
in circles” as it collects data from the
controller.
Installation Guide
AK-UI55 Info
© Danfoss | DCS (vt) | 2019.11
AN324531493969en-000101 | 1
/