Ferguson CO Detector FS1CO Owner's manual

Hello! I am an AI chatbot trained to assist you with the Ferguson CO Detector FS1CO Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

Ferguson Sp. z o.o., ul. Dworska 1, 61-619 Poznań, Poland

tel. +48 61 822 05 11, fax +48 61 822 05 59

www.ferguson-digital.eu

CO Detector FS2CO

• Detects CO

• Emits alarm sounds,

ashes with red light

• Used for boilers, heaters

• Simple and easy

installation, mobility

CO sensor cares about household lifes sensing

the growing concentration of carbon monoxide,

which is odorless and colorless gas that causes

deadly poisoning. The detector should be installed

in a room with a replace at a height of about

1.5 meters above the oor, no more than 6 m

from a potential source of CO emissions. The

sensor informs the residents of raising poisoning

danger with howling sirens and lighting alarm.

CO Detector

• Working Voltage: DC3V

(CR123A Lithium Battery)

• Static Current: <=20uA

• Alarm Current: <=60mA

• Alarm Sound: 85dB/1m

• Alarm Sensitivity:

30ppm 120mins alarm

50ppm 60-90mins alarm

100ppm 10-40mins alarm

300ppm 3mins alarm

• Networking: ZigBee Ad-Hoc Networking

• Wireless Networking Distance:

>=70m (open area)

• Working Temperature: -10°C - +50°C

• Environment Humidity: 95%RH

• Dimension: 54*54*45mm

The camera is Ferguson’s SmartHome system compatible. It can be used alone.

Install the dive on your own, without need of specialist. Easy and non-

invasive installation on a wall, ceiling or any surface. With the pinned

stands, installation of equipment is very simple and quick to perform.

EAN: 5907115003221

Ferguson Smart mobile application