Dell PowerEdge R740xd2 User guide

Brand: Dell

Model: PowerEdge R740xd2

Category: Software

Type: User guide

Lifecycle Controller User's Guide

Notes, cautions, and warnings

NOTE: A NOTE indicates important information that helps you make better use of your product.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the

problem.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

subsidiaries. Other trademarks may be trademarks of their respective owners.

Rev. A01

1 Introduction................................................................................................................................. 7

Advantages of using Lifecycle Controller........................................................................................................................... 7

Benefits of using iDRAC with Lifecycle Controller............................................................................................................ 7

New in this release.................................................................................................................................................................8

Key features........................................................................................................................................................................... 8

Licensable features in Lifecycle Controller.........................................................................................................................8

Viewing iDRAC license information..................................................................................................................................... 9

Other documents you may need......................................................................................................................................... 9

Social Media Reference.................................................................................................................................................10

Accessing documents from Dell support site................................................................................................................... 10

Contacting Dell......................................................................................................................................................................11

2 Using Lifecycle Controller............................................................................................................12

Starting Lifecycle Controller............................................................................................................................................... 12

Start messages during POST, causes, and resolutions............................................................................................. 12

Enabling Lifecycle Controller.........................................................................................................................................13

Disabling Lifecycle Controller........................................................................................................................................13

Canceling Lifecycle Controller actions.........................................................................................................................13

Using Lifecycle Controller for the first time......................................................................................................................13

Setting up Lifecycle Controller using Initial Setup Wizard........................................................................................ 14

Setting up Lifecycle Controller from the home page................................................................................................ 16

Lifecycle Controller features...............................................................................................................................................17

3 Operating system deployment..................................................................................................... 18

Installing an operating system............................................................................................................................................ 18

Using the optional RAID configuration.............................................................................................................................. 19

Configuring RAID using the operating system deployment wizard...............................................................................20

Unattended installation.......................................................................................................................................................20

UEFI Secure Boot................................................................................................................................................................20

Driver access........................................................................................................................................................................ 21

Installing an operating system on iSCSI LUN and FCoE LUN........................................................................................ 21

Post reboot scenarios..........................................................................................................................................................21

4 Monitor..................................................................................................................................... 22

Hardware inventory view and export................................................................................................................................22

About view and export current inventory........................................................................................................................ 22

About view and export factory-shipped inventory......................................................................................................... 22

Viewing hardware inventory — current or factory shipped..........................................................................................23

Exporting hardware inventory — current or factory shipped.......................................................................................23

Exporting hardware inventory to a USB drive........................................................................................................... 23

Exporting hardware inventory to network share.......................................................................................................24

Viewing or exporting hardware inventory after part replacement................................................................................24

Viewing or exporting current inventory after resetting Lifecycle Controller...............................................................25

Lifecycle Controller log....................................................................................................................................................... 25

Contents

Contents 3

Viewing Lifecycle Log history.......................................................................................................................................25

Exporting Lifecycle Log................................................................................................................................................ 26

Adding a work note to the Lifecycle Log....................................................................................................................28

5 Firmware update........................................................................................................................ 29

Firmware update methods................................................................................................................................................. 30

Version compatibility............................................................................................................................................................31

Updating firmware............................................................................................................................................................... 31

Selecting the type of update and update source...................................................................................................... 32

Using single component DUPs.....................................................................................................................................35

Selecting and applying updates................................................................................................................................... 35

System Configuration Lockdown mode........................................................................................................................... 36

Firmware rollback................................................................................................................................................................ 36

Rolling back to previous firmware versions................................................................................................................36

6 Configure.................................................................................................................................. 38

System control panel access options................................................................................................................................38

Controlling access to the front panel..........................................................................................................................38

Configuring iDRAC.............................................................................................................................................................. 39

Configuring system time and date.................................................................................................................................... 39

Configuring vFlash SD card................................................................................................................................................39

Enabling or disabling a vFlash SD card........................................................................................................................40

Initializing a vFlash SD card.......................................................................................................................................... 40

Configuring RAID.................................................................................................................................................................40

Foreign configuration found..........................................................................................................................................41

Viewing current RAID configuration.............................................................................................................................41

Selecting RAID levels..................................................................................................................................................... 41

Selecting physical disks.................................................................................................................................................42

Setting virtual disk attributes....................................................................................................................................... 43

Viewing summary...........................................................................................................................................................43

Configuring RAID using software RAID............................................................................................................................ 44

Creating a secure virtual disk on a RAID controller.........................................................................................................44

Key encryption.....................................................................................................................................................................45

Applying the local key on a RAID controller................................................................................................................45

Local key encryption mode................................................................................................................................................ 46

Encrypting unsecure virtual disks................................................................................................................................46

Rekey controller with new local key............................................................................................................................46

Removing encryption and deleting data..................................................................................................................... 46

Breaking mirrored drives.....................................................................................................................................................47

System setup — Advanced Hardware Configuration.................................................................................................... 47

Modifying device settings.............................................................................................................................................48

Collect system inventory on restart..................................................................................................................................48

Updating server inventory information....................................................................................................................... 48

Configuring local FTP server..............................................................................................................................................48

FTP authentication........................................................................................................................................................48

Requirements for a local FTP server...........................................................................................................................48

Copying repository to a local FTP server from the Dell EMC server Updates DVD.............................................49

Using Dell Repository Manager to create the repository and copy it to a local FTP server................................49

Accessing updates on local FTP server......................................................................................................................49

Contents

Configuring a local USB drive............................................................................................................................................ 49

Copying repository to a local FTP server from the Dell EMC server Updates DVD.............................................50

Using Dell Repository Manager to create the repository and copy it to a local FTP server................................50

Configuring NFS and CIFS servers................................................................................................................................... 50

Configuring NFS servers.............................................................................................................................................. 50

Configuring CIFS servers..............................................................................................................................................50

Conditions while configuring HTTP or HTTPS server.....................................................................................................51

7 Maintain.................................................................................................................................... 52

Platform restore.................................................................................................................................................................. 52

About server profile backup image..............................................................................................................................52

Supported components................................................................................................................................................ 53

Backup server profile.......................................................................................................................................................... 54

Backing up the server profile....................................................................................................................................... 54

System or feature behavior during backup................................................................................................................ 54

Export server profile........................................................................................................................................................... 55

Exporting server profile to USB drive or network share.......................................................................................... 55

Import server profile............................................................................................................................................................55

Importing server profile from a vFlash SD card, network share, or USB drive..................................................... 56

Importing server profile after system board replacement........................................................................................57

Import server license...........................................................................................................................................................58

Importing server license from a network share or USB drive..................................................................................58

Part replacement configuration.........................................................................................................................................59

Applying firmware and configuration updates to replaced parts.............................................................................59

Supported devices.........................................................................................................................................................60

Repurpose or retire system................................................................................................................................................60

Deleting server information..........................................................................................................................................60

Hardware diagnostics.......................................................................................................................................................... 61

Performing hardware diagnostics................................................................................................................................ 61

SupportAssist Collection..................................................................................................................................................... 61

Exporting the SupportAssist Collection......................................................................................................................62

8 Easy-to-use system component names........................................................................................ 64

9 Using the system setup and boot manager....................................................................................67

Choosing the system boot mode.......................................................................................................................................67

Entering System Setup.......................................................................................................................................................68

Responding to error messages.................................................................................................................................... 68

Using the system setup navigation keys.................................................................................................................... 68

System Setup options...................................................................................................................................................69

System and setup password features.............................................................................................................................. 75

Assigning system and setup password....................................................................................................................... 75

Deleting or changing an existing system and setup password................................................................................ 76

Using your system password to secure your system................................................................................................76

Operating with a setup password enabled................................................................................................................. 77

Entering the UEFI boot manager....................................................................................................................................... 77

Using the boot manager navigation keys....................................................................................................................77

Boot Manager screen....................................................................................................................................................78

UEFI Boot menu.............................................................................................................................................................78

Contents

Embedded systems management..................................................................................................................................... 78

iDRAC settings utility...........................................................................................................................................................78

Entering the iDRAC settings utility..............................................................................................................................79

10 Troubleshooting and frequently asked questions......................................................................... 80

Error messages....................................................................................................................................................................80

Frequently asked questions................................................................................................................................................80

6 Contents

Introduction

Dell Lifecycle Controller provides advanced embedded systems management to perform systems management tasks such as deploy,

configure, update, maintain, and diagnose using a graphical user interface (GUI). It is delivered as part of integrated Dell Remote Access

Controller (iDRAC) out-of-band solution and embedded Unified Extensible Firmware Interface (UEFI) applications in the latest Dell servers.

iDRAC works with the UEFI firmware to access and manage every aspect of the hardware, including component and subsystem

management that is beyond the traditional Baseboard Management Controller (BMC) capabilities.

NOTE: The UEFI environment provides the local console interface and the infrastructure for locally managed system

components.

Lifecycle Controller has the following components:

• GUI:

• Is an embedded configuration utility that resides on an embedded flash memory card.

• Is similar to the BIOS utility that is started during the boot sequence, and can function in a pre-operating system environment.

• Enables server and storage management tasks from an embedded environment throughout the life cycle of the server.

• Remote Services (WS-Man and iDRAC RESTful API with Redfish) simplify end-to-end server life cycle management by using the one-

to-many method. It can be accessed over the network by using the secure web services interfaces and can be used by applications

and scripts. Also, it provides a single view of all the system settings that can be imported and exported from the server to perform

one-to-many cloning operations. For more information about remote services features, see Lifecycle Controller Remote Services Quick

Start Guide available at www.dell.com/idracmanuals.

Topics:

• Advantages of using Lifecycle Controller

• Benefits of using iDRAC with Lifecycle Controller

• New in this release

• Key features

• Licensable features in Lifecycle Controller

• Viewing iDRAC license information

• Other documents you may need

• Accessing documents from Dell support site

• Contacting Dell

Advantages of using Lifecycle Controller

The iDRAC with Lifecycle Controller technology in the server’s embedded management allows you to perform useful tasks such as

configuring BIOS and hardware settings, deploying operating systems, changing RAID settings, and saving hardware profiles. Together,

iDRAC and Lifecycle Controller provide a robust set of management functions that can be used throughout the entire server lifecycle.

Lifecycle controller simplifies server lifecycle management — from provisioning, deployment, patching and updating to servicing and user

customization — both locally and remotely. Lifecycle Controller includes managed and persistent storage that embeds systems

management features and Operating System device drivers directly on the server. This eliminates the media-based system management

tools and utilities traditionally needed for systems management.

Benefits of using iDRAC with Lifecycle Controller

The benefits include:

• Increased availability — Early notification of potential or actual failures that help prevent a server failure or reduce recovery time after

failure.

• Improved productivity and lower Total Cost of Ownership (TCO) — Extending the reach of administrators to larger number of distant

servers can make the IT staff more productive while driving down operational costs such as travel.

• Secure environment — By providing secure access to remote servers, administrators can perform critical management functions while

maintaining server and network security.

Introduction 7

• Enhanced embedded management — Lifecycle Controller provides deployment and simplified serviceability through the LC GUI for

local deployment, Remote Services WS-Man and iDRAC RESTful API with Redfish interfaces for remote deployment integrated with

OpenManage Enterprise, OpenManage Essentials, and partner consoles.

For more information on iDRAC, see the iDRAC User's Guide available at www.dell.com/idracmanuals . For more information on wsman,

see Lifecycle Controller User's Guide available at www.dell.com/idracmanuals .

New in this release

The following are the updates in this release:

• Added support for Storage drive SMARTlogs data to the SupportAssist collection report.

• Added support for Telemetry streaming data to SupportAssist Collection report.

• Added support for Extend System Lockdown to 3rd party I/O devices.

• Added support for multi-level filtering for LC Log viewing.

• Added support for enabling 'No Config' on LCUI Network setting page.

• Added support for Secure Enterprise Key Manager.

• Updates for downloads.dell.com made easier.

• Added support for file browsing for LCUI update function from USB device.

Key features

The key features of Lifecycle Controller are:

• Provisioning — Entire preoperating system configuration from a unified interface.

• Deploying — Simplified operating system installation with the embedded drivers on Lifecycle Controller. Unattended installation mode

is available for Microsoft Windows and Red Hat Enterprise Linux 7 operating systems.

• Download drivers for operating system installation from www.dell.com/support.

• Patching or updating — Operating system agnostic, and reduced maintenance downtime with direct access to updates from . It

simplifies firmware updates by maintaining a working version for rollback.

• Servicing — Continuous availability of diagnostics without depending on a hard-disk drive. Ability to flash firmware automatically, while

replacing components such as a PowerEdge storage controller, NIC, and power supply unit. Support for VLAN in network

configuration.

• System erase — Deletes the server and storage-related data on selected components of a server. You can delete information on

BIOS, Lifecycle Controller data (LC logs, configuration database and rollback firmware versions), iDRAC settings, and storage

components on the server.

NOTE: You cannot delete the iDRAC license file.

• Security — Support local key encryption.

• Enhanced Security — Support for TLS 1.2, 1.1, and 1.0. To enhance security, default setting is TLS 1.1 and higher.

• Hardware inventory — Provides information about the current and factory system configuration.

• Lifecycle Controller logs for troubleshooting.

• CIFS operations — CIFS operations from LCUI uses SMBv2 protocol but is displayed as CIFS on the GUI.

Licensable features in Lifecycle Controller

Lifecycle Controller features are available based on the type of license (iDRAC Basic, iDRAC Express, iDRAC Express for Blades, iDRAC

Enterprise and iDRAC Datacenter) that you purchase. Only licensed features are available in the Lifecycle Controller GUI. For more

information about managing licenses, see the iDRAC User's Guide available at www.dell.com/idracmanuals . The following table lists the

Lifecycle Controller features available based on the license purchased.

Table 1. Licensable Features in Lifecycle Controller

Feature iDRAC Basic iDRAC Express (Rack

and Tower Servers)

iDRAC Express (Blade

Servers)

iDRAC Enterprise /

Datacenter

Firmware Update

Yes Yes Yes Yes

Secure Enterprise

Key Manager

— — — Yes (With SEKM license)

8 Introduction

Feature iDRAC Basic iDRAC Express (Rack

and Tower Servers)

iDRAC Express (Blade

Servers)

iDRAC Enterprise /

Datacenter

Operating system

deployment

Yes Yes Yes Yes

Device configuration

Yes Yes Yes Yes

Diagnostics

Yes Yes Yes Yes

Part replacement —

Yes Yes Yes

Local updates

Yes Yes Yes Yes

Driver packs

Yes Yes Yes Yes

Hardware inventory

Yes Yes Yes Yes

Remote services

(through WS-MAN)

— Yes Yes Yes

SupportAssist

Collection

Yes Yes Yes Yes

Repurpose or retire

system

Yes Yes Yes Yes

Viewing iDRAC license information

After you open the Lifecycle Controller GUI page, you can view details about the iDRAC installed on a server. To view the iDRAC license

information:

1. Start Lifecycle Controller. For more information, see Starting Lifecycle Controller.

2. On any page of Lifecycle Controller, click About in the upper-right corner.

3. On the About page, click License Information.

The following information is displayed on the iDRAC License Report page:

Table 2. : License Information

Device ID Indicates the Service Tag of the server on which iDRAC is installed.

License

• Entitlement ID — Indicates a unique ID provided by the manufacturer.

• Status — Indicates the status of the installed license.

• Description — Indicates the license details.

• License Type — Indicates the type of license of the device. For example, Evaluation, Evaluation Extension, or

Perpetual.

• Expiration — Indicates the date and time at which the license expires.

Other documents you may need

In addition to this guide, you can access the following guides available at www.dell.com/manuals.

• The Lifecycle Controller Online Help provides detailed information about the fields available on the GUI and the descriptions for the

same. To view the online help information, click Help in the upper-right corner of all Lifecycle Controller pages, or press <F1>.

• The Lifecycle Controller Release Notes is available from within the product. To read through the Release Notes within Lifecycle

Controller, click About in the upper-right corner, and then click View Release Notes. A web version is also given to provide last-

minute updates to the system or documentation or advanced technical reference material intended for experienced users or

technicians.

• This document provides an overview of iDRAC digital licensing and how it is different from iDRAC available in the PowerEdge servers.

It also provides an understanding on iDRAC Express and Enterprise value offerings.

• The Lifecycle controller Remote Services For PowerEdge Servers Quick Start Guide provides information about using remote services.

• The Systems Management Overview Guide provides brief information about the various Dell software available to perform systems

management tasks.

Introduction

• The Integrated Dell Remote Access Controller (iDRAC) User’s Guide provides information about configuring and using an iDRAC for

rack, tower, and blade servers to remotely manage and monitor your system and its shared resources through a network.

• The Dell Repository Manager User Guide provides information about creating customized bundles and repositories comprised of Dell

Update Packages (DUPs) for systems running supported Microsoft Windows operating systems.

• The "Lifecycle Controller Supported Dell Systems and Operating Systems" section in the Dell Systems Software Support Matrix

provides the list of Dell systems and operating systems that you can deploy on target systems.

• The PowerEdge RAID Controller (PERC) 9 User's Guide provides specification and configuration-related information about the PERC

9 controllers.

• The Glossary provides information about the terms used in this document.

• The OpenManage Server Update Utility User's Guide provides information about using the DVD-based application for identifying and

applying updates to the system.

The following system documents are available to provide more information:

• The safety instructions that came with your system provide important safety and regulatory information. For additional regulatory

information, see the Regulatory Compliance home page at www.dell.com/regulatorycompliance. Warranty information may be included

within this document or as a separate document.

• The Rack Installation Instructions included with your rack solution describe how to install your system into a rack.

• The Getting Started Guide provides an overview of system features, setting up your system, and technical specifications.

• The Owner’s Manual provides information about system features and describes how to troubleshoot the system and install or replace

system components.

• Lifecycle Controller Web Services Interface Guide–Windows and Linux.

Social Media Reference

To know more about the product, best practices, and information about Dell solutions and services, you can access the social media

platforms such as Dell TechCenter and YouTube. You can access blogs, forums, white papers, how-to videos, and so on from the Lifecycle

Controller knowledge base at www.dell.com/support/article/sln311809.

For Lifecycle Controller documents and other related firmware documents, see www.dell.com/esmmanuals.

Accessing documents from Dell support site

You can access the required documents in one of the following ways:

• Using the following links:

• For all Enterprise Systems Management and OpenManage Connections documents — www.dell.com/esmmanuals

• For OpenManage documents — www.dell.com/openmanagemanuals

• For iDRAC and Lifecycle Controller documents — www.dell.com/idracmanuals

• For Serviceability Tools documents — www.dell.com/serviceabilitytools

• For Client Command Suite Systems Management documents — www.dell.com/omconnectionsclient

Accessing documents using the product search

1. Go to www.dell.com/support.

2. In the Enter a Service Tag, Serial Number... search box, type the product name. For example, PowerEdge or iDRAC.

A list of matching products is displayed.

3. Select your product and click the search icon or press enter.

4. Click Manuals & documents.

Accessing documents using product selector

You can also access documents by selecting your product.

1. Go to www.dell.com/support.

2. Click Browse all products.

3. Click the desired product category, such as Servers, Software, Storage, and so on.

4. Click the desired product and then click the desired version if applicable.

Introduction

NOTE: For some products, you may need to navigate through the subcategories.

5. Click Manuals & documents.

Contacting Dell

NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice,

packing slip, bill, or Dell product catalog.

Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services

may not be available in your area. To contact Dell for sales, technical support, or customer service issues:

1. Go to www.dell.com/support.

2. Select your support category.

3. Verify your country or region in the Choose a Country/Region drop-down list at the bottom of the page.

4. Select the appropriate service or support link based on your need.

Introduction 11

Using Lifecycle Controller

This section provides information about starting, enabling, and disabling Lifecycle Controller. Before using Lifecycle Controller, make sure

that the network and iDRAC are configured. For more information, see the Integrated Dell Remote Access Controller User’s Guide at

www.dell.com/esmmanuals.

Topics:

• Starting Lifecycle Controller

• Using Lifecycle Controller for the first time

• Lifecycle Controller features

Starting Lifecycle Controller

To start Lifecycle Controller, restart the system and press <F10> during POST to select Lifecycle Controller from the list displayed. When

Lifecycle Controller is started for the first time, it displays the Initial Setup wizard that allows you to configure the preferred language

and network settings.

NOTE: If the system does not start Lifecycle Controller, see Start messages during POST, causes, and resolutions.

Start messages during POST, causes, and resolutions

The table lists the messages that appear during system startup, and their appropriate cause and resolution.

Table 3. Start messages during POST, cause, and resolution

Message Cause Resolution

Lifecycle Controller disabled

• The system is turned on or restarted while

iDRAC is initializing. This occurs if:

• The system is turned on immediately

after AC power is connected to the

system.

• The system is restarted immediately

after resetting iDRAC.

Wait for a minute after resetting iDRAC to

restart the system, so that iDRAC initializes.

• Lifecycle Controller is manually disabled

Press <F2> during POST, select System

Setup > iDRAC Settings > Lifecycle

Controller > Enable.

Lifecycle Controller update required

• The embedded device that has a backup

of the product may contain corrupted

data.

• Ungracefully exits Lifecycle Controller for

three consecutive times if one of the

following conditions occur:

• 3 consecutive unsuccessful attempts

to enter Lifecycle Controller GUI.

• 3 consecutive unsuccessful attempts

to complete inventory collection.

• 3 consecutive unsuccessful attempts

to perform tasks in Automated Task

applications.

Enable Lifecycle Controller. For more

information, see Enabling Lifecycle Controller

Lifecycle Controller not available Another process is using iDRAC. Wait for 30 minutes for the current process

to complete, restart the system, and then

12 Using Lifecycle Controller

Message Cause Resolution

retry. You can use the iDRAC GUI to check

the job queue and the status.

Enabling Lifecycle Controller

To enable access to Lifecycle Controller during system startup:

1. Press <F2> during POST.

The System Setup Main Menu page is displayed.

2. Select iDRAC Settings.

The iDRAC Settings page is displayed.

3. Select Lifecycle Controller.

4. Under Lifecycle Controller, select Enabled.

5. On the System Setup Main Menu page, select Finish to save the settings.

6. Select Yes to restart the system.

Disabling Lifecycle Controller

To disable access to Lifecycle Controller at system startup:

1. Press <F2> during POST.

The System Setup Main Menu page is displayed.

2. Select iDRAC Settings.

The iDRAC Settings page is displayed.

3. Select Lifecycle Controller.

4. Under Lifecycle Controller, select Disabled.

5. On the System Setup Main Menu page, select Finish to save the settings.

6. Select Yes to restart the system.

Canceling Lifecycle Controller actions

If Lifecycle Controller causes the system to restart twice, cancel the Lifecycle Controller actions. However, if Lifecycle Controller causes

the system to restart the third time, the message Lifecycle Controller update required is displayed, you must enable

Lifecycle Controller. For more information on enabling Lifecycle Controller, see Enabling Lifecycle Controller.

CAUTION:

This action cancels all tasks that are being performed by Lifecycle Controller. It is recommended that you

cancel the Lifecycle Controller actions only when absolutely necessary.

1. Press <F2> during POST.

The System Setup Main Menu page is displayed.

2. In the System Setup Main Menu page, select iDRAC Settings.

The iDRAC Settings page is displayed.

3. Select Lifecycle Controller.

4. Under Cancel Lifecycle Controller Actions, select Yes.

5. On the System Setup Main Menu page, select Finish to save the settings.

6. Select Yes to restart the system.

Using Lifecycle Controller for the first time

After you start Lifecycle Controller for the first time, by default the Initial Setup Wizard page is launched. Use this wizard to set up the

Language ,Keyboard Type, Network Settings, and iDRAC Network and Credentials.

Using Lifecycle Controller

Setting up Lifecycle Controller using Initial Setup Wizard

Use the Initial Setup Wizard to select the language and default keyboard settings, configure network settings, iDRAC network and

credential configuration, and view the summary of the settings.

Specifying language and keyboard type

1. Start Lifecycle Controller. For more information, see Starting Lifecycle Controller.

2. On the left pane, click Settings.

3. On the Settings pane, click Language and Keyboard. Use the up-and down-arrow keys to select options.

• From the Language drop-down menu, select the language.

• From the Keyboard Type drop-down menu, select the keyboard type.

4. Click Next to save the new settings.

Viewing Product Overview

Use this page to see the overview of Lifecycle Controller and iDRAC. Click Next to continue.

NOTE: For more information about the product, scan the QR code provided on this page by using a supported QR reader

or scanner and navigate to www.dell.com/idracmanuals.

The Lifecycle Controller Network Settings page is displayed.

Configuring Lifecycle Controller Network Settings

Use this page to configure network settings for a NIC.

1. Start Lifecycle Controller. For more information, seeStarting Lifecycle Controller.

2. On the left pane, click Settings.

3. On the Settings pane, click Network Settings.

4. From the NIC Card drop-down menu, select the NIC port that you want to configure.

NOTE: You can use only one NIC at a time to communicate with the network.

5. From the IPV4 Network Settings→ IP Address Source drop-down menu, select one of the following options:

• DHCP — indicates that the NIC must be configured by using an IP address from a DHCP server. DHCP is the default option and

the DHCP IP address is displayed on the Network Settings page.

• Static IP — indicates that the NIC must be configured by using a static IP. Type the IP Address Properties — IP Address,

Subnet Mask, Default Gateway, and DNS Address. If you do not have this information, contact your network administrator.

• No Configuration — indicates that the NIC must not be configured.

• Static IP — indicates that the NIC must not be configured.

6. From the IPV6 Network Settings→ IP Address Source drop-down menu, select one of the following options:

• DHCPv6 — indicates that the NIC must be configured by using an IP address from a DHCPv6 server. If DHCPv6 is selected, a

DHCPv6 IP address is displayed on the Network Settings page.

NOTE:

While configuring DHCP server with IPv6, the configuration fails if you disable forwarding or advertising

options.

• Static IP — indicates that the NIC must be configured by using a static IP. Type the IP Address Properties — IP Address,

Subnet Mask, Default Gateway, and DNS Address. If you do not have this information, contact your network administrator.

7. Click Enabled and type the VLAN ID and Priority under Lifecycle Controller VLAN Settings to configure the VLAN settings of a

NIC.

8. Click Next.

NOTE: If Lifecycle Controller settings are not correctly configured, an error message is displayed.

NOTE: If you are unable to connect to a network, verify the settings. For information about correct network

settings, contact your network administrator.

14 Using Lifecycle Controller

Configuring iDRAC Network and Credentials

Use this page to configure remote access parameters for iDRAC.

1. From the IP Address Source menu, select one of the following options:

• Static — indicates that the network must be configured by using a static IP. Type the IP Address Properties such as IP Address,

Subnet Mask, Default Gateway, DNS Address Source, and DNS Address. If you do not have this information, contact your

network administrator.

• DHCP — indicates that the NIC must be configured using an IP address from a DHCP server. DHCP is the default option and the

DHCP IP address is displayed on the Network Settings page.

2. Enter the following credentials:

• Account Username— The user name to access iDRAC network

• Password— The password to access iDRAC network

• Confirm Password— The password to access iDRAC network

3. Click Next

Recommended characters in user names and passwords

This section provides details about the recommended characters while creating and using user names and passwords.

Use the following characters while creating user names and passwords:For recommended characters while accessing network shares, see

Recommended characters while accessing network shares.

Table 4. Recommended characters for user names

Characters Length

0-9

A-Z

a-z

- ! # $ % & ( ) * / ; ? @ [ \ ] ^ _ ` { | } ~ + < = >

1-16

Table 5. Recommended characters for passwords

Characters Length

0-9

A-Z

a-z

' - ! " # $ % & ( ) * , . / : ; ? @ [ \ ] ^ _ ` { | } ~ + < = >

1-20

NOTE: You may be able to create user names and passwords that include other characters. However, to ensure

compatibility with all interfaces, Dell recommends using only the characters listed here.

NOTE: To improve security, it is recommended to use complex passwords that have 8 or more characters and include

lower-case alphabets, upper-case alphabets, numbers, and special characters. It is also recommended to regularly

change the passwords, if possible.

Table 6. Recommended characters while accessing network shares

Characters Length

0-9

A-Z

a-z

- * / : ? @ \ _ |

User name: 1-16

Password: 1-20

Using Lifecycle Controller 15

Viewing summary of network settings

This page provides a summary of the Lifecycle Controller and iDRAC IP configurations. Verify the configurations and click Finish to save

the settings and exit from the Settings wizard.

Accessing help

Each Lifecycle Controller page has a help associated with it. Press <F1> or click Help (in the upper-right corner) to view the help

information about the features available on a page.

Viewing release notes

1. To view the release notes, click About on any page of Lifecycle Controller.

NOTE: The About option is not available from the help pages.

2. Click View Release Notes.

Setting up Lifecycle Controller from the home page

If you miss to make any changes in the Initial Setup Wizard, or if you want to make any configuration changes later, restart the server,

press F10 to launch Lifecycle Controller, and select Settings from the home page.