MODEL HM
R
-123 3 well
HMR-125 5 well
HMR-127 7 well
© 2006 Henny Penny Corporation, Eaton, OH 45320 USA Revised 06/07/10
PROJECT QUANTITY ITEM NO
General Information
Henny Penny HMR heated
merchandisers are designed to
provide the ultimate in flexibility and
performance for displaying and
serving fresh hot foods.
The HMR 120 Series Two-tier
merchandiser gives operators a
HMR-127 two-tier self-serve heated
merchandiser, 7 wells.
Heated merchandisers
Two-tier self-serve
Standard Features
• Stainless steel interior and exterior
construction, tempered front and
side panel glass and doors.
• Two-tier units come in 3, 5, and 7-
well sizes that match all Henny
Penny HMR merchandisers.
• Stainless steel lower deck and
removable upper tier wire grid.
• Choose from four glass profiles:
Henny Penny curved
Henny Penny straight
Vision (matches Hussmann
Vision
®
series)
Advantage (matches Tyler
Advantage
®
series.)
• Independent controls over each
well for upper radiant heat and food
probe temperature display.
• Lower heat controlled separately.
• Control settings can be locked to
prevent accidental changes.
• Separate switches for power and
lights.
• Brilliant halogen lamps for attractive
food presentation.
• Front glass lifts easily for cleaning
and closes gently on gas springs.
• Mirrored or clear side glass. (CE
units are only available with clear
side glass.)
• Removable sliding rear doors with
mirrored glass.
• Fold-down wood or plastic cutting
board.
whole new level of presentation
capacity in the same amount of
space. Units feature a stainless steel
lower deck and slim stainless steel
wire grid upper tier that lets heat
circulate freely throughout the case.
This design virtually eliminates the
visual interruption of bulky solid
shelves, maximizing customer sight-
lines and allowing the brilliant
overhead halogen lighting to
enhance product presentation on
both levels. In addition, four different
profiles are available to help you
match existing cases.
The HMR 120 Series can be
ordered in 3, 5, and 7-well self-serve
configurations. Merchandiser bases
are available in Profile or Pedestal
styles in several heights and colors.
(See separate Data Sheet.)
APPROVED APPROVED AS NOTED RESUBMIT
AUTHORIZED SIGNATURE DATE
37 in. (938 mm)
4 1/2 in.
(114 mm)
9 1/2 in.
(241 mm)
Dimensions
3 well 5-well 7 well
Length 43 1/4 in. (1099 mm) 69 1/4 in. (1769 mm) 95 1/4 in. (2419 mm)
Depth 37 in. (938 mm) 37 in. (938 mm) 37 in. (938 mm)
Height 31 3/8 in. (796 mm) 31 3/8 in. (796 mm) 31 3/8 in. (796 mm)
Required clearances
Top: 15 in. (381 mm) for raised front glass.
Back: 9 in. (229 mm) for cutting board
Crated dimensions
3 well 5 well 7 well
Length 49 3/4 in. (1264 mm) 75 3/4 in. (1924 mm) 100 1/2 in. (2550 mm)
Depth 48 3/4 in. (1238 mm) 48 3/4 in. (1238 mm) 48 3/4 in. (1238 mm)
Height 40 in. (1016 mm) 40 in. (1016 mm) 40 in. (1016 mm)
Volume 56 cu. ft. (1.57m³) 86 cu. ft. (2.39 m³) 113 cu. ft. (3.17 m³)
Net weight N/A
Crated weight
3 well 325 lbs. (148 kg)
5 well 470 lbs. (213 kg)
7 well 600 lbs. (272 kg)
Capacity
Lower tier deck Upper tier wire shelf
3 well 31 3/4 x 37 3/4 in. (806 x 959 mm) 18 x 38 3/4 in. (457 x 984 mm)
5 well 31 3/4 x 62 1/2 in. (806 x 1587 mm) 18 x 64 3/4 in. (457 x 1645 mm)
7 well 31 3/4 x 87 1/4 in. (806 x 2216 mm) 18 x 90 3/4 in. (457 x 2305 mm)
© 2006 Henny Penny Corporation, Eaton, OH 45320 USA Revised 06/07/10
PROJECT ITEM NO
Laboratory certifications
Model Volts Phase Cycle/Hz Watts Amps Wire Plug
120/208 1 50/60 5016 24.1 3+G
120/240 1 50/60 5243 21.8 3+G
220-240 1 50/60 5763 24.0 2+G
G
X
W
Y
NEMA L14-30P
120/208 3 50/60 5016 16.7 4+G
120/240 3 50/60 5243 15.2 4+G
3 well
380-415 3
50/60
5763 9.2 3NG
G
X
Y
Z
W
NEMA L21-20P
120/208 1 50/60 5592 26.9 3+G
120/240 1 50/60 5854 24.4 3+G
220-240 1 50/60 6374 26.6 2+G
G
X
W
Y
NEMA L14-30P
120/208 3 50/60 5592 17.4 4+G
120/240 3 50/60 5854 15.8 4+G
5 well
380-415 3 50/60 6374 9.9 3NG
G
X
W
Z
Y
NEMA L21-30P
120/208 1 50/60 5504 26.5 3+G
120/240 1 50/60 5766 24.0 3+G
220-240 1 50/60 6286 26.2 2+G
G
Y
X
W
NEMA 14-50P
120/208 3 50/60 5504 17.0 4+G
120/240 3 50/60 5766 15.5 4+G
7 well
380-415 3 50/60 6286 9.6 3NG
G
X
W
Z
Y
NEMA L21-30P
Electrical
Henny Penny Curved
Henny Penny Straight
Vision
Matches Husmann Vision
®
Advantage
Matches Tyler Advantage
®
Available glass profiles:
31 3/8 in.
(796 mm)
7-well: 95 1/4 in. (2419 mm)
5-well: 69 1/4 in.
(
1759 mm
)
3-well: 43 1/4 in. (1099 mm)
MODEL HM
R
-123 3 well
HMR-125 5 well
HMR-127 7 well
Heated merchandisers
Two-tier self-serve
• Materials—interior and exterior of stainless
steel and tempered glass.
• Upper tier is stainless steel wire grid. Grid
shelves and pan supports are removable for
easy cleaning.
• Merchandiser bases are not included. See
separate specifications sheet.
• Units shall have rear-mounted control panel
above wells with LED digital display. Upper
and lower heat are controlled
independently, with separate upper radiant
heat control for each well.
• Mirrored side glass panels and sliding glass
rear doors are standard, except for CE units
which are clear.
• Fold-down wood or plastic cutting board is
standard.
Bidding Specifications
• Provide Henny Penny Model HMR-120
Series Heated Merchandiser in 3, 5, or 7-
well configuration. All units shall be
supplied as two-tier merchandisers
consisting of lower deck and upper shelf
display areas.
• All units are self-serve with partial front
glass specified in any of four available glass
profiles, standard.
Continuing product improvement may subject specifications to change without notice.
Henny Penny Corporation
PO Box 60 Eaton OH 45320 USA
+1 937 456.8400 800 417.8417
+1 937 456.8434 Fax 800 417.8434 Fax
www.hennypenny.com
/
