9
Pause function
Activating the pause function
Tap the
I symbol. The selected heat setting flashes on the
hotplate indicator. Heating is interrupted.
Continuing cooking
Tap the
I symbol again within 3 minutes. The hotplates
continue to heat.
Pause time exceeded
After 3 minutes, a
‹ flashes in the display. Switch the hotplate
off and make your settings again.
Automatic time limit
If a hotplate is in use for a long time without the setting being
changed, the automatic time limit is activated.
The hotplate stops heating.
‹ flashes in the hotplate indicator.
Switch the hotplate off.
When the time limit is activated depends on the heat setting
selected (1 to 10 hours).
Note: You can switch the hotplate back on again at any time.
Timer
Automatic hotplate switch-off
Enter a cooking time for the relevant hotplate. When the
cooking time has elapsed, the hotplate switches off
automatically.
Setting the cooking time:
1. Set the heat setting.
2. Touch the § symbol repeatedly until the indicator light for
the desired hotplate begins to flash.
‹‹ flashes in the timer
display.
3. Touch the + or - symbol. The default value appears.
+ symbol: 30 minutes
- symbol: 10 minutes
4. Touch the + or - symbol until the desired cooking time
appears on the timer display.
The cooking time flashes for a few seconds and then starts
counting down. If you have set a cooking time for several
hotplates, the shortest cooking time will be displayed. The
indicator lamps for the hotplates are lit.
When the cooking time has elapsed
When the cooking time has elapsed, the hotplate switches off.
‹ flashes in the hotplate indicator. A signal sounds for 10
seconds.
‹‹ flashes in the timer display and the indicator lamp
flashes. Turn off the hotplate control.
Changing the cooking time
Touch the
§ symbol repeatedly until the desired hotplate
indicator begins to flash. Use the + or - symbol to change the
cooking time.
Clearing the cooking time
Touch the
§ symbol repeatedly until the desired hotplate
indicator begins to flash. Touch the + and - symbol
simultaneously.
‹‹ flashes in the timer display.
Notes
■ If you wish to call up the cooking time for a hotplate, touch
the
§ symbol repeatedly until the desired hotplate indicator
lights up. The cooking time is displayed for 5 seconds.
■ You can set a cooking time of up to 99 minutes.
■ The automatic time limit also applies to the timer function.
■ You can use the pause function even if you have set a
cooking time.
■ The timer function is no longer active if there is a power cut.
Switching off the input confirmation
When you touch a panel, a short sound confirms this. You can
switch this sound off.
1. Set all 4 hotplates to heat setting 3.
2. Switch off the hotplates one after the other from right to left.
3. Select a heat setting for a hotplate. Press the hotplate control
until a signal sounds.
4. Switch off the hotplate control.
You can also switch entry confirmation on again. Proceed in
exactly the same way as for switching off.