Haier HT-20216C is an LCD monitor with a microprocessor multi-button OSD menu control and compatibility with various video standards, including IBM standard VGA, extended VGA, super VGA, XGA, SXGA, WSXGA+, and VESA standard. It supports Windows xp/vista/7/8/10 systems, allowing you to connect it to a wide range of computers. The monitor features an adjustable stand that allows you to tilt it within a range of approximately 5°~15° for optimal viewing comfort.
Haier HT-20216C is an LCD monitor with a microprocessor multi-button OSD menu control and compatibility with various video standards, including IBM standard VGA, extended VGA, super VGA, XGA, SXGA, WSXGA+, and VESA standard. It supports Windows xp/vista/7/8/10 systems, allowing you to connect it to a wide range of computers. The monitor features an adjustable stand that allows you to tilt it within a range of approximately 5°~15° for optimal viewing comfort.
LCD Monitor
User Manual
Model
HT-20216C
• Please read this manual carefully before use.
• The company reserves the right to final interpretation of the instructions.
• Product appearance, please prevail in kind.
• Please keep it with the invoice after reading it.
• In case of product technology or software upgrade, without prior notice
1
2
Table of Contents
Important safety precautions........................3
Product introduction.....................................5
Installation instruction..................................6
Monitor overview.........................................7
Functional operation instructions.................8
Technical Information ................................12
1.
Please read all the instructions in this manual in detail and save this
manual for future reference.
2.
Observe all cautions and instructions marked on the display.
3.
Do not use accessories that are not recommended by the manufacturer, as
this may be dangerous.
4.
Do not place the monitor near water, such as a bathtub, washbasin, kitchen
sink, washing machine, wet basement, or swimming pool.
5.
Do not place the monitor on an unstable platform or table to prevent the
monitor from falling or hurting the user, or the monitor itself is damaged.
Use only the placement table recommended by the manufacturer or sold with
the monitor. For wall panel or rack mount, please follow the manufacturer's
instructions and use the manufacturer's approved installation tools.
6.
The grooves and openings on the cabinet or at the rear and bottom are designed
for ventilation and are also used to ensure the reliability of the machine
and prevent it from overheating. Do not place the monitor on a bed, sofa, rug,
or other similar surface to prevent clogging of the vents. Do not place the
monitor near or on a heat source such as a radiator. Do not place the monitor
in an embedded device unless adequate ventilation is provided.
7.
This monitor can only be used with a power supply of the type shown on its
nameplate. If you have questions about the type of power supply you are using,
please consult your monitor dealer or local power supply office.
8.
The power cord is the main power supply connection. Do not leave anything on
the power cord. Do not place the power cord in a location where the user
could touch it accidentally.
9.
As an additional protection, turn off the power when the monitor is not in
use; when power is off or when the monitor is not in use for a long time,
unplug the power cord from the outlet to prevent the surge from being caused
by the power cord.
10.
Do not overload or extend the power cord, otherwise it may cause fire or
electric shock.
11.
Do not allow any foreign objects to fall from the casing groove into the
display to prevent fire or electric shock from hitting high voltage points
or shorting the parts. To prevent liquid from splashing onto the display.
12.
If the display is faulty, do not open the case. Do not repair the display
by yourself. Please contact Haier Service Center 4006 999 999 for repair.
13.
Unplug the monitor from the outlet and contact Haier Service Center for
repair when the following cases happen:
a. The power cord or power plug is damaged or worn out.
b. There is liquid spilled into the display.
c. The display is watered.
d. If the monitor is not working properly according to the instructions,
please adjust only the buttons specified in the instruction manual, because
improper adjustment of other buttons may cause danger and require a lot of
maintenance by the maintenance personnel to restore the machine to normal.
e. The display is dropped or the case is damaged.
f. When the display is obviously abnormal, it indicates that it needs to be
repaired.
14.
When replacing parts, make sure that the service personnel use the
replacement components specified by the manufacturer that have the same
performance as the original parts. Unauthorized replacement components may
cause fire, electric shock or other hazards.
15.
After the display inspection is completed, the maintenance personnel should
be required to perform routine safety checks to ensure that the display is
in safe operation.
3
Important safety precautions
16.
The power outlet should be located near the display or in an easy-to-use
location.
17.
The power cord is the primary power outage.
Note: The pictures and icons in this manual are for aesthetic use only and do not show the
actual situation of the product itself.
4
1.1
Product Features
1.2
Packaging and Accessories
After unpacking the carton, please check if your LCD monitor box has the
following accessories:
a, LCD Monitor
b, Power Cord
c, Signal cable
d, User manual
If there is any missing, please contact the dealer from which you purchased.
5
Product Introduction
Microprocessor multi-button OSD menu control
Compatible with IBM standard VGA, extended VGA, super VGA, XGA,
SXGA, WSXGA+, and VESA standard.
Support Windows xp/vista/7/8/10 system
Note:
Please save the carton and packing materials for later use
when moving the monitor.
2.1
Monitor angle adjustment
To ensure a healthy and comfortable body posture while using the
monitor, you can adjust the monitor within a range of approximately -
5°~ 15°
2.2
Base, bracket installation and unloading
a.
Mount the bracket to the display b.Mount the base to the bracket a.Press and hold the bracket hook to remove the base b. Remove the stand from the display
2.3
Monitor Installation
1, Turn off the computer and unplug the power cord
2, Connect the signal cable to the signal connector on the back of the computer and rotate the screws at
the ends of the signal cable.
3, Connect the AC output of the power cord to the AC input of the rear case of the monitor and plug the
power cord into the nearest movie jack.
4, Turn on the power switch of the computer and monitor. If there is image on the monitor, you have
successfully installed it. If the monitor has no image, you should check all the cables.
（optional）
6
Installation Notes
DVI
DVI VGA AC
DVI cable
-5°
~
15°
-5°~ 15°
Please refer to the figure below
to install
Please refer to the figure below
to uninstall
Monitor input terminal overview
1, AC port
2, DVI port
3, VGA port
Note: The specific ports and signal cable, please
refer to the actual product.
3.1 Control panel overview
• Menu / Select (MENU):
When the OSD is activated, the next level sub-menu is executed or the
corresponding function is executed, and the OSD main menu is displayed
in the OSD inactive state.
• Adjust / Brightness shortcut ( ):
The selection is adjusted in the OSD activation state, and the brightness
mode shortcut is in the OSD inactive state.
• Adjust / Contrast shortcuts ( ):
The selection is adjusted in the OSD activation state, and the contrast
shortcut is in the OSD inactive state.
• Automatic adjustment (AUTO):
When the OSD menu is off, pressing this button will enter the auto
adjustment function. The auto adjustment function will automatically
set the horizontal position, vertical position, focus, etc. (for VGA
mode). The OSD activation state is to return to the previous level or
exit the menu.
•Switch /( ):
Turn the monitor's power on/off.
7
Monitor Overview
4.1 Power switch
Turn the monitor's power on/off.
Note: This power button is a trigger switch and cannot completely cut
off the power. If you want to completely cut off the power, please
unplug the plug from the socket.
4.2 Power indicator
The power backlight indicator is green in normal operation, green
flashing in power saving state, and the indicator is off when the monitor
is turned off.
4.3 Screen Menu (OSD) Usage Guidelines
The following description can help you adjust the display through the
on-screen operation menu. Once you have completed a function, select
the AUTO button to exit the menu.
Follow the steps below to make adjustments using the OSD (on-screen
menu).
Step 1: Press the main menu button (MENU) to activate the OSD menu.
Step 2: Press the select button or to select the function icon you
want to adjust.
Step 3: Press the MENU button to activate the function icon you want to
adjust.
Step 4: Press or to increase/decrease the set value and adjust the
screen.
Step 5: Press the MENU button again to store the adjustment settings.
Press AUTO to return to the previous menu. You can use or to select
other function icons for setting,or press the AUTO button to exit.
Step 6: Repeat steps 2 through 5 to make other function adjustments.
8
Functional operation instructions
Functional operation instructions
OSD shortcut keys
This feature makes it easy for users to adjust functions such as brightness, contrast and image.
a) When the menu is not activated, press “ ” directly to pop up the brightness
adjustment shortcut.
b) When the menu is not activated, press “ ” directly to pop up the contrast adjustment
shortcut.
c) When the menu is not activated, pressing the "AUTO" button directly will automatically
adjust the horizontal position, vertical position, phase, etc.
When the user turns on the dynamic contrast or selects the non-standard mode, the brightness and contrast shortcuts are invalid.
Press the MENU button to activate the OSD menu and the display will show settable OSD menu.
1, Color adjustment
When the user turns on the dynamic contrast or selects the non-standard mode, the brightness and contrast shortcuts are invalid.
2, Image location setting
Note: The system automatically sets the image position under the DVI signal. This OSD is automatically hidden.
Note: The pictures and icons in this manual are for aesthetic use only and do not show the actual situation of the product itself.
9
Brightness
Contrast
5
Automatic image adjustment
Contrast: set the display contrast
Brightness: Set the brightness of the display screen
Color temperature: set 9300K 7500K 6500K USER
Automatic image adjustment: automatically adjust clock,
phase and position
Automatic color adjustment: automatically adjust color
Contrast
Brightness
Color temperature
Automatic image adjustment
Automatic color adjustment
Horizontal position: image moves left and right
Vertical position: image moves up and down
Clock: adjust the clock pulse
Phase: adjust the focus of the image
Horizontal position
Vertical position
Clock
Phase
Functional operation instructions
3, Menu setting
4, Function setting
5, Reset
10
DVI
Language selection: language selection
Horizontal position: Adjust the left and right position of the
OSD menu
Vertical position: Adjust the up and down position of the OSD
menu
Menu time: Adjust the display time of the OSD menu
Transparency: Adjust the brightness of the OSD background
Language selection Simplified
Chinese
Horizontal position
Vertical position
Menu time
Transparency
Mode: preset PC, Game, Movie mode
Signal selection: Select to display VGA or DVI input
signal
Aspect ratio: display 16:9, AUTO, 4:3
DCR: Dynamic contrast on and off
Blue Light Filter: Blu-ray resistance adjustment
Signal selection
Aspect ratio
Reset
Reset: restore factory settings
4.5 Factory preset display mode
Mode
Resolution
Horizontal
Vertical
1
720
×
400
31.47 kHz
70 Hz
2
640
×
480
31.47 kHz
60 Hz
3
640
×
480
37.90 kHz
72Hz
4
640
×
480
37.50 kHz
75 Hz
5
800
×
600
37.88 kHz
60 Hz
6
800
×
600
48.08 kHz
72 Hz
7
800
×
600
46.87kHz
75 Hz
8
1024
×
768
48.36 kHz
60 Hz
9
1024
×
768
60.02 kHz
75 Hz
10
1280
×
1024
63.98 kHz
60 Hz
11
1280
×
1024
80.0 kHz
75 Hz
12
1440× 900
55.46 kHz
60 Hz
13
1680× 1050
65.29 kHz
60 Hz
14
1920× 1080
67.16 kHz
60 Hz
Note: Different sizes of monitors display different resolutions.
There is no notice if the factory preset display mode is changed.
11
Functional operation instructions
Technical Information
5.1 Product Specification
19.5” LCD Monitor
Highest
resolution
1920*1080@75 Hz
Recommended
resolution
1920*1080@60 Hz
Horizontal
frequency
64-83 KHz
Vertical
frequency
50- 75 Hz
Visible size
434.88*238.68mm
Environment
Use Environment
Storage
Environment
Temperature 0℃~ 4 0 ℃
Humidity
20%~80%
No
Condensation
Temperature
- 20
℃~
60
℃
Humidity
10%~90%
No
Condensation
Power
AC100-240V 50/60Hz 1.0-0.7A
Size Pack
517(W)x121(D)x350(H)
mm
Note: The above technical specifications are subject to change without notice.
12
Technical Information
5.2 Troubleshooting
If your monitor does not work properly, the following methods can help you
solve the general problem quickly. If the following methods still cannot be
solved, please contact Haier Service Center 4006 999 999.
No screen display
➢ Make sure the power is connected to the monitor.
➢ Check if the monitor signal cable is connected to the host computer.
Adjust the brightness and contrast of the display.
➢ Whether the display is in a power saving state.
➢ Whether the display setting of the Windows xp/vista/7/8/10 system is
correct. If it is not correct, please enter the safe mode of the system
and reset the display output.
Display image is too large, too small or disturbing line
➢ Use the “Auto”function in the OSD menu (for VGA signals only).
Color distortion or lack of color
➢ Check if the monitor signal cable is connected to the host computer.
➢ Use the color temperature function of the OSD main menu to make color
adjustments.
Image is too bright or too dark
➢
Adjust using the brightness and contrast functions of the OSD menu.
A slight Newton's ring appears during abnormal adjustment of the display
➢
In the case of power on, if you use too much force or adjust the
angle to exceed the maximum angle (15 degrees) during the adjustment
of the display angle, the display may appear a slight Newton ring
in a moment, disappear within three seconds, without affecting the
display’s performance and features.
Display cleaning and maintenance
➢
In order to maintain good display and heat dissipation of the LCD,
the display case and screen need to be cleaned regularly. Unplug
the monitor before cleaning the monitor.
➢
You can use a slightly damp soft cloth (spray a small amount of
water or a neutral cleaning solvent on a soft cloth) to wipe dust
and dirt from the cabinet and the screen, then dry the case and
screen with a soft, dry cloth.
13
The name and content of harmful substances in the product：
China Energy Efficiency Label
According to China's "Energy Efficiency Labeling Management Measures", this monitor
meets the following requirements:
Energy efficiency (cd/W)
1.5
Off state power (W)
0.50
Sleep state power (W)
0.50
Energy efficiency rating:
2
Energy efficiency standards:
GB 21520-2015
Prompt Description of the Waste Electrical and Electronic Recycling Regulations
Haier Computer advocates environmental protection and low-carbon consumption experience，
recommends that users who have Haier computers should abide by the relevant laws and regulations
on the recycling of waste electrical and electronic products of the country when they no
longer need this product, and hand it over to the local state-recognized recycling manufacturer.
It will reduce waste of resources,and protects the natural environment of the earth.
14
The name of parts
Harmful Substance
Lead
HG
Cadmium
Hexavalent
chromium
polybrominated
biphenyls
Polybrominated diphenyl
ethers
LED Screen
×
○
○
○
○
○
Printed circuit board
components
×
○
○
○
○
○
Power cord and
connecting cables
×
○
○
○
○
○
Metal structural parts
×
○
○
○
○
○
Plastic and polymer
parts
○
○
○
○
○
○
This form has been prepared in accordance with the provisions of SJ/T 11364.
O: Indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit
requirement specified in GB/T 26572.
X: Indicates that the harmful substance is at least in a certain homogeneous material of the part exceeding the limit
requirement of GB/T 26572.
Note: The harmful substances contained in this product cannot be completely replaced due to the limitations of global
technology and process level. However, the content of harmful substances in this product is very small, and long-term
use will not cause harm to the human body. Please feel free to use it.
Technical Information
Haier Information Technology(Shenzhen)Co.,Ltd.
W e b s i t e : h t t p : / / w w w . h a i e r - e d u . c o m /
15
Certificate of Quality
Inspector:
The product has passed the
inspection and is approved
for delivery.
A d d r e s s : B 4 R o o m 2 1 F l o o r N o . 3 T o w e r B u i l d i n g ,
N o . 0 0 9 C h i n e s e Ac a d e m y of S c i e n c e a n d T e c h n o l o g y
D e v e l o p m e n t T e c h n o l o g y P a r k , So u t h R o a d N a n s h a n
D i s t r i c t , S h e n z h e n C i t y , G u a n g d o n g P r o v i n c e ,
P e o p l e ’ s R e p u b l i c o f C h i n a
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
Haier HT-20216C is an LCD monitor with a microprocessor multi-button OSD menu control and compatibility with various video standards, including IBM standard VGA, extended VGA, super VGA, XGA, SXGA, WSXGA+, and VESA standard. It supports Windows xp/vista/7/8/10 systems, allowing you to connect it to a wide range of computers. The monitor features an adjustable stand that allows you to tilt it within a range of approximately 5°~15° for optimal viewing comfort.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI