Intermec AC10 Supplementary Manual

Type
Supplementary Manual
AC10 Compliance Insert
For Users in the United States and Canada
This product conforms to the following approvals. The users of this product are cautioned to use accessories and peripherals approved by
Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to this product that are not approved
by Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the user’s authority to operate
the equipment.
FCC Digital Emissions Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at their own expense.
Canadian Digital Apparatus Compliance
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Conformité aux normes canadiennes sur les appareils numériques
Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel brouilleur du Canada.
For Users Outside of the United States or Canada
美国和加拿大以外的用户请注意
Caution: This marking indicates that the user should read all included documentation before use.
Attention: Ce marquage indique que l’usager doit, avant l’utilisation, lire toute la documentation incluse.
Caution: The AC10 4-bay charger is suitable for use only with Intermec portable printer PB42 and power supply model
number 073573. No user-serviceable parts.
Attention: Le chargeur 4 baies AC10 doit être uniquement utilisé avec l’imprimante portable PB42 Intermec numéro de
modèle 073573. Il ne contient aucune pièce réparable par l’utilisateur.
Caution: This marking indicates that the user should read all included documentation before use.
Caution: The AC10 4-bay charger is suitable for use only with Intermec portable printer PB42 and power supply model
number 073573. No user-serviceable parts.
警告:该标志表明用户在使用前应阅读所有随附文档。
警告:4 插座 AC10 充电器仅适用于 Intermec 便携式打印机 PB42 并且电源型号为 073573。
请勿擅自拆装充电器内的任何部件。
Für Benutzer außerhalb von Kanada oder den Vereinigten Staaten
Para usuários fora do Canadá ou dos Estados Unidos
Для пользователей вне Соединенных Штатов или Канады
Para usuarios fuera de Canada o de los Estados Unidos
AC10 Compliance Insert
*933-007-002*
P/N 933-007-002
Vorsicht: Diese Kennzeichnung weist darauf hin, dass der Benutzer vor dem Gebrauch alle mitgelieferten Unterlagen
lesen soll.
Vorsicht: Das Ladegerät mit 4 Steckplätzen AC10 eignet sich nur für den Einsatz mit dem tragbaren Intermec-Drucker
PB42 und dem Netzteil, Modellnummer 073573. Es enthält keine Teile, die vom Benutzer gewartet werden können.
Cuidado: Esta identificação indica que o usuário deve ler toda a documentação fornecida antes do uso.
Cuidado: El cargador AC10 de 4 compartimientos es apto para usarse solamente con la impresora portátil PB42 y la
fuente de alimentación con número de modelo 073573. No hay piezas a las cuales pueda dar-servicio el usuario.
Осторожно: Эта пометка означает, что пользователь должен прочитать всю прилагаемую документацию,
прежде чем начинать работу.
Осторожно: 4-гнездовое зарядное устройство AC10 предназначено только для использования с
портативным принтером Intermec PB42 и блоком питания модели 073573. Детали, заменяемые или
обслуживаемые пользователем, отсутствуют.
Precaución: Esta marca indica que el usuario debe leer toda la documentación incluida antes del uso.
Precaución: O carregador de quatro compartimentos AC10 só deve ser usado com a impressora portátil PB42 e a fonte de
alimentação da Intermec modelo número 073573. Este equipamento não contém peças que possam ser reparadas pelo
usuário.
Worldwide Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
©
2006 Intermec Technologies
Corporation. All rights reserved.
  • Page 1 1
  • Page 2 2

Intermec AC10 Supplementary Manual

Type
Supplementary Manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages