Supermicro AOC-S3216L-L16iT User manual

Type
User manual
USER’S GUIDE
Revision 1.0
AOC-S3216L-L16iT
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-
Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: [email protected]
При обращении используйте промокод AND-PDF и получите скидку.
User's Guide Revision 1.0
Release Date: May 8, 2017
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2017 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
The information in this User's Guide has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
and makes no commitment to update or to keep current the information in this user's guide, or to
notify any person or organization of the updates. Please Note: For the most up-to-date version
of this user's guide, please see our Website at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this user's guide at any time and without notice. This product, including software and
documentation, is the property of Supermicro and/or its licensors, and is supplied only under a
license. Any use or reproduction of this product is not allowed, except as expressly permitted by
the terms of said license.
IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE
USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between the manufacturer and the customer shall be governed by the laws of
Santa Clara County in the State of California, USA. The State of California, County of Santa Clara
shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for
all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: [email protected]
При обращении используйте промокод AND-PDF и получите скидку.
Preface
About this User's Guide
This user's guide is written for system integrators, IT technicians and
knowledgeable end users. It provides information for the installation and use of the
AOC-S3216L-L16iT controller card.
About this Controller Card
The Supermicro SAS AOC-S3216L-L16iT internal controller card features six-
teen internal SAS3 ports with four internal mini SAS HD connectors. It utilizes a
Broadcom SAS3216 SAS3 controller chip and features a 1.2 GHz processor. The
AOC-S3216L-L16iT can provide support for JBOD systems of up to 1024 devices.
The AOC-S3216L-L16iT is streamlined to meet the growing demand for increased
data throughput and scalability requirements across the enterprise-class server
platforms. It is a low power and cost-effective near-line storage solution that delivers
maximum performance and reliability.
An Important Note to the User
All images and layouts shown in this user's guide are based upon the latest PCB
revision available at the time of publishing. The card you have received may or may
not look exactly the same as the graphics shown in this user's guide.
Preface
iii
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: [email protected]
При обращении используйте промокод AND-PDF и получите скидку.
AOC-S3216L-L16iT Controller Card User's Guide
iv
Returning Merchandise for Service
A receipt or copy of your invoice marked with the date of purchase is required be-
fore any warranty service will be rendered. You can obtain service by calling your
vendor for a Returned Merchandise Authorization (RMA) number. When returning
the AOC-S3216L-L16iT card to the manufacturer, the RMA number should be promi-
nently displayed on the outside of the shipping carton, and the shipping package
is mailed prepaid or hand-carried. Shipping and handling charges will be applied
for all orders that must be mailed when service is complete. For faster service, you
can also request a RMA authorization online http://www.supermicro.com/RmaForm/.
This warranty only covers normal consumer use and does not cover damages in-
curred in shipping or from failure due to the alternation, misuse, abuse or improper
maintenance of products.
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: [email protected]
При обращении используйте промокод AND-PDF и получите скидку.
v
Preface
Contacting Supermicro
Headquarters
Address: Super Micro Computer, Inc.
980 Rock Ave.
San Jose, CA 95131 U.S.A.
Tel: +1 (408) 503-8000
Fax: +1 (408) 503-8008
Email: [email protected] (General Information)
[email protected] (Technical Support)
Website: www.supermicro.com
Europe
Address: Super Micro Computer B.V.
Het Sterrenbeeld 28, 5215 ML
's-Hertogenbosch, The Netherlands
Tel: +31 (0) 73-6400390
Fax: +31 (0) 73-6416525
Email: [email protected] (General Information)
[email protected] (Technical Support)
[email protected] (Customer Support)
Website: www.supermicro.nl
Asia-Pacic
Address: Super Micro Computer, Inc.
3F, No. 150, Jian 1st Rd.
Zhonghe Dist., New Taipei City 235
Taiwan (R.O.C)
Tel: +886-(2) 8226-3990
Fax: +886-(2) 8226-3992
Website: www.supermicro.com.tw
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: [email protected]
При обращении используйте промокод AND-PDF и получите скидку.
Table of Contents
Preface
Chapter 1 Overview
1-1 Overview ......................................................................................................... 1-1
1-2 Technical Specications .................................................................................. 1-1
General
............................................................................................................ 1-1
OS Support
..................................................................................................... 1-1
Physical Dimensions ....................................................................................... 1-1
Chapter 2 Hardware Components
2-1 Controller Card Layout and Components ....................................................... 2-1
2-2 Major Components .......................................................................................... 2-2
2-3 Connectors and LEDs ..................................................................................... 2-3
SAS Connectors ......................................................................................... 2-3
2-4 Front Header Locations .................................................................................. 2-4
Chapter 3 Installation
3-1 Static-Sensitive Devices .................................................................................. 3-1
Precautions
..................................................................................................... 3-1
Unpacking
....................................................................................................... 3-1
3-2 Before Installation ........................................................................................... 3-2
3-3 Installing the Controller Card ......................................................................... 3-2
3-4 Static Sensitive Devices .................................................................................. 3-4
Precautions
..................................................................................................... 3-4
Unpacking
....................................................................................................... 3-4
3-5 Installing the Drivers in Windows .................................................................... 3-5
3-6 Uninstalling the Drivers ................................................................................... 3-5
AOC-S3216L-L16iT Controller Card User's Guide
vi
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: [email protected]
При обращении используйте промокод AND-PDF и получите скидку.
Chapter 1: Overview
1-1
Chapter 1
Overview
1-1 Overview
Congratulations on purchasing your controller card from an acknowledged leader in
the industry. Supermicro products are designed with the utmost attention to detail
to provide you with the highest standards in quality and performance. For product
support and updates, please visit our website at http://www.supermicro.com/
1-2 Technical Specications
General
Broadcom SAS3216 SAS3 controller
Sixteen internal SAS3 ports
1.2 GHz processor
HBA supports 1024 devices
Enlarged venting hole for improved airow
Plugs into PCIe x8 slot to support Gen 3 up to 8Gb/s.
Supports 12 GB/s, 6 GB/s and 3 GB/s SAS data transfer rates.
Supports 6 GB/s and 3 GB/s SATA data transfer rates
OS Support
Windows 2012 and 2008. RedHat Enterprise and SUSE Linux.
Power Consumption
15.1 Watts
Physical Dimensions
Card PCB dimensions: 6.1" x 2.7 " (L x H)
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: [email protected]
При обращении используйте промокод AND-PDF и получите скидку.
AOC-S3216L-L16iT Controller Card User's Guide
1-2
Notes
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: [email protected]
При обращении используйте промокод AND-PDF и получите скидку.
Chapter 2: Hardware Components
2-1
Chapter 2
Hardware Components
2-1 Controller Card Layout and Components
Figure 2-1. AOC-S3216L-L16iT
The AOC-S3216L-L16iT is a low-prole PCIe x8 Gen 3 controller card with sixteen
internal SAS3 ports packed in four mini SAS HD connectors. The following pages
describe the components and settings for the AOC-S3216L-L16iT.
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: [email protected]
При обращении используйте промокод AND-PDF и получите скидку.
AOC-S3216L-L16iT Controller Card User's Guide
2-2
2
6
7
8
9
13
9
AOC-S3216L-L16iT
REV:1.00
DESIGNED IN USA
5
Y
E
20
R
K
10 15
AE
25 30
AK
A1
A2
A7
A8
CG1
CG2
B1
B2
B7
B8
C1
C2
C7
C8
D1
D2
D7
D8
CG3
M8
M7
E1
E2
G2
F2
F1
H2
H1
G1
O8
N8
N7
P8
P7
O7
F7
F8
G8
E7
G7
H7
H8
E8
CG5
L8
L7
P1
P2
K8
K7
O1
O2
J8
J7
N1
N2
I7
M1
CG4
I8
M2
J1
J2
K2
K1
L1
L2
I1
I2
PRESS FIT
A7
A8
CG2
B7
B8
C7
C8
D7
D8
CG3
E1
E2
G2
F2
F1
H2
H1
G1
F7
F8
G8
E7
G7
H7
H8
E8
PRESS FIT
B1
B11 B12
B49
1
4
1
4
1 2 3
1 2 3
U20
U1
J2
J1
J*
U21
L5
L7
L8
L2
C96
J5
J7
C94
C19
C186
Y1
MH2
MH1
SAS12-15
SAS 8-11
SAS 4-7
SAS 16-19
CN3
CN2
CN5
CN4
CN1
CN0
E
E
D
D
C
C
B
B
A
A
SAS 20-23
SAS 0-3
MDIO
UART0
Figure 2-2. AOC-S3216L-L16iT Layout
2-2 Major Components
The following are the major components that make up the AOC-S3216L-L16iT
controller card:
1
4
1
3
1
2
1
1
1
6
1
5
AOC-S3216L-L16iT
Component Description
1 SAS Connectors SAS 0 - 3
2 SAS Connectors SAS 4 - 7
3 SAS Connectors SAS 8 - 11
4 SAS Connectors SAS 12 - 15
5 MDIO Header, designated MDIO, J7
6 UART Header, designated UART0 Serial Debug Port, J5
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: [email protected]
При обращении используйте промокод AND-PDF и получите скидку.
Chapter 2: Hardware Components
2-3
2-3 Connectors and LED
SAS Connectors
There are four mini SAS HD connectors on the controller card, providing 16 ports
that support a transfer rate on each port of up to 12 Gb/s with SAS devices and
6Gb/s with SATA devices.
Figure 2-3. SAS3 Connectors
AOC-S3216L-L16iT
Component Description
1 SAS Connectors SAS 0-3
2 SAS Connectors SAS 4-7
3 SAS Connectors SAS 8-11
4 SAS Connectors SAS 12-15
5 Heartbeat LED
2
6
7
8
9
13
9
AOC-S3216L-L16iT
REV:1.00
DESIGNED IN USA
5
Y
E
20
R
K
10 15
AE
25 30
AK
A1
A2
A7
A8
CG1
CG2
B1
B2
B7
B8
C1
C2
C7
C8
D1
D2
D7
D8
CG3
M8
M7
E1
E2
G2
F2
F1
H2
H1
G1
O8
N8
N7
P8
P7
O7
F7
F8
G8
E7
G7
H7
H8
E8
CG5
L8
L7
P1
P2
K8
K7
O1
O2
J8
J7
N1
N2
I7
M1
CG4
I8
M2
J1
J2
K2
K1
L1
L2
I1
I2
PRESS FIT
A7
A8
CG2
B7
B8
C7
C8
D7
D8
CG3
E1
E2
G2
F2
F1
H2
H1
G1
F7
F8
G8
E7
G7
H7
H8
E8
PRESS FIT
B1
B11 B12
B49
1
4
1
4
1 2 3
1 2 3
U20
U1
J2
J1
J*
U21
L5
L7
L8
L2
C96
J5
J7
C94
C19
C186
Y1
MH2
MH1
SAS12-15
SAS 8-11
SAS 4-7
SAS 16-19
CN3
CN2
CN5
CN4
CN1
CN0
E
E
D
D
C
C
B
B
A
A
SAS 20-23
SAS 0-3
MDIO
UART0
1
3
1
1
1
4
1
2
Heartbeat LED
A blinking green LED indicates the rmware is running on the controller chip.
BAR CODE
A7
A8
A1
A2
CG1
CG2
B1
B2
B7
B8
C1
C2
C7
C8
D1
D2
D7
D8
CG3
E8
E7 E1
E2
G2
F2
F1
H2
H1
G1
G8
F8
F7
H8
H7
G7
M7
N7
N8
O8
O7
P7
P8
CG5
M8
L8
L7
P1
P2
K8
K7O1
O2
J8
J7N1
N2
I7M1
CG4
I8
M2
K2
J2
J1
L2
L1
K1
I2
I1
A7
A8
A1
A2
CG1 CG2
B1
B2
B7
B8
C1
C2
C7
C8
D1
D2
D7
D8
CG3
E8
E7
E1
E2
G2
F2
F1
H2
H1
G1
G8
F8
F7
H8
H7
G7
A1
A11A12
A49
+
+
4
1
41
1
2
15
16
A
C
C127
C128
Q1
RT11
RT15
RT20
RT19
RT12
RT14
RT3
RT8
RT17
RT18
RT16
RT2
RT1
RT13
RT4
CS52
CS51
CS50
CS49
CS48
CS47
CS46
CS45
CS44
CS43
CS42
CS41
CS40
CS39
CS38
CS37
CS55
CS56
CS57
CS58
CS59
CS60
CS61
CS62
CS63
CS64
CS65
CS66
CS67
CS68
CS69
CS70
CS71
CS73
CS74
CS75
CS76
CS77
CS78
CS79
CS80
CS81
CS82
CS83
CS84
CS85
CS86
CS72
C93
C90
C89
C76
C75
C177 C165
C122
C121
C216
C219
C84
C42
C23C33
C210
C213
C22
C26
C82
C80
C79
C78
C77
C40
C204
C24
C36
C207
C21
C20
C25
C81
U5
J6
C212
C126
C92
C91
C109
C108
C101
C39
C203
C217
C218
C43
C85
C211
C206
C74
C44
C197
C194
C4
CT3
C1
C2
LT11
LT15
LT19
LT20
LT12
LT14
LT3
LT8
LT18
LT17
LT16
LT2
LT1
LT13
LT4
C41
C118
C191
C185
C196
C59
C58
C57
C56
C73
C72
C71
C70
C69
C68
C67
C66
C55
C54
C53
C52
C86
C65
C64
C63
C62
C61
C60
C51
C50
C49
C48
C47
C46
C45
C30
C214
C208
C205
C202
CT99
CT98
CT97
CT96
CT95
CT94
CT93
CT92
CT91
CT90
CT9
CT89
CT88
CT87
CT86
CT85
CT84
CT83
CT82
CT81
CT80
CT79
CT78
CT77
CT76
CT75
CT74
CT73
CT72
CT71
CT70
CT69
CT68
CT67
CT66
CT65
CT64
CT63
CT62
CT61
CT60
CT59
CT58
CT57
CT56
CT55
CT54
CT53CT52
CT51
CT50
CT49
CT48
CT47
CT46
CT45
CT44
CT43
CT42
CT41
CT40
CT38
CT37
CT36
CT35
CT33
CT32
CT31 CT30
CT29
CT28
CT18
CT15
CT14
CT129
CT128
CT127
CT126
CT125
CT123
CT122
CT121
CT120
CT118
CT117
CT116
CT115
CT114
CT113
CT112
CT111
CT110
CT109
CT108
CT107
CT106
CT105
CT104
CT103
CT102
CT101
CT100
CT151
CT150
CT149
CT148
CT147
CT146
CT145
CT144
CT143
CT142
CT141
CT140
CT139
CT138
CT137
CT136
CT135
CT134
CT132
CT131
CT130
CT11
C31
CT25
C37
C38
C87
CT6
C139
C12
CS9
CS8
CS7
CS6
CS5
CS4
CS3
CS2
CS17
CS16
CS15
CS14
CS13
CS12
CS11
CS10
C14
C138
C13
C201
CT39
CT133
R164
R156
R283
R212
R157
R155
R95
R93
R92
R90
R91
R89
R96
R94
R117
R114
R115
R162
RS1
RS2
RS3
RS4
R71
R20
R54
R53
R63
R62
R61
R46
R45
R44
R42
R41
R128
R83
R82
R81
R66
R65
R111
R131
R47
R126
R121
R28
R27
R32
R116
R113
R261
R262
R263
R264
R265
R266
R267
R268
R269
R270
R271
R272
R273
R274
R275
R276
R257
R259
R284
RS9
RS8
RS12
RS11
RS10
U4
U13
U14
U24
RN1
RN2
RN4RN3
RN5
RN6
D1
TP45
TP44
TP43
TP42
TP40
TP35
TP34
TP33
TP32
TP31
TP30
TP29 TP28TP27
TP26
TP25
TP24
TP23
TP22 TP21
TP11
TP10
TP48
TP47
TP50
TP49
TP41
TP20TP19
TP18
TP17
TP16TP15
TP14
TP13
TP12
TP1
TP46
G
G
A
A
F
F
E
E
D
D
C
C
B
B
HB_LED
ICE0
1
5
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: [email protected]
При обращении используйте промокод AND-PDF и получите скидку.
AOC-S3216L-L16iT Controller Card User's Guide
2-4
2-4 Front Header Locations
Figure 2-4. Headers for Engineering Tests
AOC-S3216L-L16iT
Description Purpose
UART Header, designated UART0 Serial Debug Port J5 For Engineering Debug
MDIO Header, designated MDIO J7 For Engineering Test
J7
J5
2
6
7
8
9
13
9
AOC-S3216L-L16iT
REV:1.00
DESIGNED IN USA
5
Y
E
20
R
K
10 15
AE
25 30
AK
A1
A2
A7
A8
CG1
CG2
B1
B2
B7
B8
C1
C2
C7
C8
D1
D2
D7
D8
CG3
M8
M7
E1
E2
G2
F2
F1
H2
H1
G1
O8
N8
N7
P8
P7
O7
F7
F8
G8
E7
G7
H7
H8
E8
CG5
L8
L7
P1
P2
K8
K7
O1
O2
J8
J7
N1
N2
I7
M1
CG4
I8
M2
J1
J2
K2
K1
L1
L2
I1
I2
PRESS FIT
A7
A8
CG2
B7
B8
C7
C8
D7
D8
CG3
E1
E2
G2
F2
F1
H2
H1
G1
F7
F8
G8
E7
G7
H7
H8
E8
PRESS FIT
B1
B11 B12
B49
1
4
1
4
1 2 3
1 2 3
U20
U1
J2
J1
J*
U21
L5
L7
L8
L2
C96
J5
J7
C94
C19
C186
Y1
MH2
MH1
SAS12-15
SAS 8-11
SAS 4-7
SAS 16-19
CN3
CN2
CN5
CN4
CN1
CN0
E
E
D
D
C
C
B
B
A
A
SAS 20-23
SAS 0-3
MDIO
UART0
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: [email protected]
При обращении используйте промокод AND-PDF и получите скидку.
3-1
Chapter 3: Installation
Chapter 3
Installation
3-1 Static-Sensitive Devices
Electrostatic Discharge (ESD) can damage electronic com ponents. To avoid dam-
aging your controller card, it is important to handle it very carefully. The following
measures are generally sufcient to protect your equipment from ESD.
Precautions
Use a grounded wrist strap designed to prevent static discharge.
Touch a grounded metal object before removing the controller card from the
antistatic bag.
Handle the expansion card by its edges only; do not touch its components or
peripheral chips.
Put the controller card back into the antistatic bags when not in use.
For grounding purposes, make sure that your system chassis provides excellent
conductivity between the power supply, the case, the mounting fasteners and
the controller card.
Unpacking
The controller card is shipped in antistatic packaging to avoid static damage. When
unpacking your component, make sure you are static protected.
Note: To avoid damaging your components and to ensure proper installation, be
sure to always connect the power cord last, and always remove it before adding,
removing or changing any hardware components.
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: [email protected]
При обращении используйте промокод AND-PDF и получите скидку.
3-2
AOC-S3216L-L16iT Controller Card User's Guide
3-2 Before Installation
To install the controller card properly, follow the steps below.
Prior to Installation
1. Power down the system and unplug the power cord.
2. Use industry-standard anti-static equipment (such as gloves or wrist strap)
and follow the precautions on page 3-1 to avoid damage caused by ESD.
3-3 Installing the Controller Card
Depending upon which system conguration is used, a riser card may or may not
be required to install the AOC-S3216L-L16iT.
Installing the Controller Card
1. Power down the system, remove the power cords from the rear of the power
supply and remove the system cover.
2. Verify that your controller card is equipped with the correct length of PCIe slot
mounting bracket for your system. The AOC-S3216L-L16iT controller card in-
cludes a low-prole PCIe mounting bracket. However, if your system features
full-height PCIe slots, replace the low-prole bracket with a full-height bracket.
3. Insert the controller card into a x8 PCI-E slot.
4. Connect the mini SAS HD cables from the controller card to either the direct
attached storage target devices or the cable sockets on the backplanes.
5. The cable latch will click into the locked position when connected properly.
6. Replace the system cover, plug in the power cord and power up the system.
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: [email protected]
При обращении используйте промокод AND-PDF и получите скидку.
3-3
Chapter 3: Installation
Figure 3-1. Connecting the Cables
2
6
7
8
9
13
9
AOC-S3216L-L16iT
REV:1.00
DESIGNED IN USA
5
Y
E
20
R
K
10 15
AE
25 30
AK
A1
A2
A7
A8
CG1
CG2
B1
B2
B7
B8
C1
C2
C7
C8
D1
D2
D7
D8
CG3
M8
M7
E1
E2
G2
F2
F1
H2
H1
G1
O8
N8
N7
P8
P7
O7
F7
F8
G8
E7
G7
H7
H8
E8
CG5
L8
L7
P1
P2
K8
K7
O1
O2
J8
J7
N1
N2
I7
M1
CG4
I8
M2
J1
J2
K2
K1
L1
L2
I1
I2
PRESS FIT
A7
A8
CG2
B7
B8
C7
C8
D7
D8
CG3
E1
E2
G2
F2
F1
H2
H1
G1
F7
F8
G8
E7
G7
H7
H8
E8
PRESS FIT
B1
B11 B12
B49
1
4
1
4
1 2 3
1 2 3
U20
U1
J2
J1
J*
U21
L5
L7
L8
L2
C96
J5
J7
C94
C19
C186
Y1
MH2
MH1
SAS12-15
SAS 8-11
SAS 4-7
SAS 16-19
CN3
CN2
CN5
CN4
CN1
CN0
E
E
D
D
C
C
B
B
A
A
SAS 20-23
SAS 0-3
MDIO
UART0
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: [email protected]
При обращении используйте промокод AND-PDF и получите скидку.
3-4
AOC-S3216L-L16iT Controller Card User's Guide
3-4 Static Sensitive Devices
Electrostatic Discharge (ESD) can damage electronic com ponents. To avoid dam-
aging your controller card, it is important to handle it very carefully. The following
measures are generally sufcient to protect your equipment from ESD.
Precautions
Use a grounded wrist strap designed to prevent static discharge.
Touch a grounded metal object before removing the controller card from the
antistatic bag.
Handle the controller card by its edges only; do not touch its components or
peripheral chips.
Put the controller card back into the antistatic bags when not in use.
For grounding purposes, make sure that your system chassis provides excellent
conductivity between the power supply, the case, the mounting fasteners and
the controller card.
Unpacking
The controller card is shipped in antistatic packaging to avoid static damage. When
unpacking your component, make sure you are static protected.
Note: To avoid damaging your components and to ensure proper installation, be
sure to always connect the power cord last, and always remove it before adding,
removing or changing any hardware components
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: [email protected]
При обращении используйте промокод AND-PDF и получите скидку.
3-5
Chapter 3: Installation
3-5 Installing the Drivers in Windows
Refer to the instructions that came with your controller card and follow the manu-
facturer's recommended steps for installing the operating system driver. Download
the latest drivers from the Supermicro project board at ftp://ftp.supermicro.com/
driver/SAS/LSI/3216.
3-6 Uninstalling the Drivers
To Uninstall the Drivers in Windows:
Follow the system driver uninstall procedure in the operating system.
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: [email protected]
При обращении используйте промокод AND-PDF и получите скидку.
3-6
AOC-S3216L-L16iT Controller Card User's Guide
(Disclaimer Continued)
The products sold by Supermicro are not intended for and will not be used in life support systems,
medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency com-
munication devices or other critical systems whose failure to perform be reasonably expected to result
in signicant injury or loss of life or catastrophic property damage. Accordingly, Supermicro disclaims
any and all liability, and should buyer use or sell such products for use in such ultra-hazardous ap-
plications, it does so entirely at its own risk. Furthermore, buyer agrees to fully indemnify, defend
and hold Supermicro harmless for and against any and all claims, demands, actions, litigation, and
proceedings of any kind arising out of or related to such ultra-hazardous use or sale.
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: [email protected]
При обращении используйте промокод AND-PDF и получите скидку.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18

Supermicro AOC-S3216L-L16iT User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI