Eizo DURAVISION FDX1501 User manual

日本語

English Deutsch Français

中文

セットアップマニュアル

重要： ご使用前に必ずこのセットアップマニュアルおよび取扱説明書（CD-ROM内）を

よくお読みになり、正しくお使いください。このセットアップマニュアルは大切に

保管してください。

SetupManual

Important: PleasereadthisSetupManualandtheUser’sManualstored(ontheCD-

ROM)carefullytofamiliarizeyourselfwithsafeandeffectiveusage.Please

retainthismanualforfuturereference.

Installationshandbuch

Wichtig: LesenSiediesesHandbuchzurEinrichtungunddasBenutzerhandbuch

(aufderCD-ROM)aufmerksamdurch,umsichmitdersicherenund

efzientenBedienungvertrautzumachen.BewahrenSiediesesHandbuch

zumspäterenNachschlagenauf.

Manueld’installation

Important: VeuillezlireattentivementceManueld’installationetleManueld’utilisation

(inclussurleCD-ROM)andevousfamiliariseravecceproduitetde

l’utiliserefcacementetentoutesécurité.Veuillezconservercemanuel

pourréférenceultérieure.

设定手册

重要事项： 请仔细阅读本设定手册和用户手册（储存在光盘上），以便掌握如何安全、

有效地使用本产品。请保留本手册，以备日后参考。

Page is loading ...

1

English

SAFETYSYMBOLS

This manual and this product use the safety symbols below. They denote critical information. Please read them

carefully.

WARNING

Failure to abide by the information in a WARNING may result in serious injury and can be life

threatening.

Indicates an attention to be required.

Indicates a prohibited action.

Indicates a mandatory action that must be followed.

CompatibleResolutions

The monitor supports the following resolutions.

AnalogInput(D-Sub)

Resolution ApplicableSignals

VerticalScan

Frequency

DotClock

640×400 NECPC-9801,PC-9821AP2 upto70Hz

80MHz

(Max.)

640×480 VGA,VESA upto75Hz

720×400 VGATEXT 70Hz

800×600 VESA upto75Hz

1024×768

*

VESA upto75Hz

DigitalInput(DVI-D)

Resolution ApplicableSignals

VerticalScan

Frequency

DotClock

640×480 VGA 60Hz

65MHz

(Max.)

720×400 VGATEXT 70Hz

800×600 VESA 60Hz

1024×768

*

VESA 60Hz

A graphics board in conformance with VESA standard is required.

*

Recommended resolution

AboutSetupManualandUser’sManual

SetupManual

(this manual)

Describes basic information ranging from installation of the

monitor to using the monitor.

User’sManualof

thismonitor

*

Describes the application information of the monitor such as

screen adjustments, settings, and specications.

User’sManualof

TouchPanelDriver

*

Describes the installation and use of the touch panel driver.

*

PDF le on the CD-ROM (Installation of Adobe Reader is required.)

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,

electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION.

EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information condential

unless prior arrangements are made pursuant to EIZO NANAO CORPORATION’s receipt of said information.

Although every effort has been made to ensure that this manual provides up-to-date information, please note that

EIZO monitor specications are subject to change without notice.

2

PRECAUTIONS

IMPORTANT

• This product is intended to be used with an industrial device designed to build industrial systems.

- Transportation systems (Ship, aircraft, train, automobile, etc.)

- Safety devices (Disaster prevention system, security control system, etc.)

- Equipment with direct effect on human life (Life support systems, Medical equipment or devices used in the

operating room, etc.)

- Nuclear energy control devices (Nuclear energy control systems, security control systems of nuclear facilities,

etc.)

- Main line devices (Operation control for transportation, control systems specic to aircrafts, etc.)

• To ensure personal safety and proper maintenance, please read this section.

WARNING

Thisproductisintendedtobehousedinanenclosure.Donotusethebaremonitor

separately.

Attempting to use a malfunctioning unit may result in electric shock, or equipment damage.

Iftheunitbeginstoemitsmoke,smellslikesomethingisburning,ormakesstrange

noises,disconnectallpowerconnectionsimmediatelyandcontactyourdealerforadvice.

Attempting to use a malfunctioning unit may result in re, electric shock, or equipment damage.

DonottouchadamagedLCDpaneldirectlywithbarehands.

The liquid crystal that may leak from the panel is poisonous if it enters the eyes or mouth. If any part

of the skin or body comes in direct contact with the panel, please wash thoroughly. If some physical

symptoms result, please consult your doctor.

3

English

PackageContents

Checkthatallthefollowingitemsareincludedinthepackagingbox.Ifanyitemsaremissingordamaged,contact

yourlocaldealer.

Note

• Please keep the packaging box and materials for future movement or transport of the monitor.

• Monitor

• Analogsignalcable:MD-C87

• USBcable:MD-C93(forFDX1501Tonly)

• EIZOLCDUtilityDisk(CD-ROM)

• SetupManual(thismanual)

• “ForUsersofTouchPanelLCDMonitor”

(forFDX1501Tonly)

• Clamper2pcs.

• ScrewsforxingtheclamperM4×12:2pcs.

• VESAmountingscrewsM4×12:4pcs.

• Metalpanelttings:8pcs.(Panelmounttypeonly)

(Prepareascrewdriver.)

ControlsandFunctions

10

11

7 8 9

51 2 3 4 6

Top

Bottom

Attachingtheclamper

• FDX1501T

Ex:Connectedto

powerjack

Adjustmentmenu

(ScreenManager

*

)

Example:FDX1501T(Chassismounttype)

1. button/ button Usedwith tosetthemonitor(keylockandDDC/CIcommunication).

Thesebuttonsdonotfunctionbythemselves.

2.

button Switchesinputsignalsfordisplay.

3.

button DisplaystheAdjustmentmenu,determinesanitemonthemenuscreen,and

savesvaluesadjusted.

4.

 button • Choosesandincreases/decreasesadjustmentsettingsforadvanced

adjustmentusingtheAdjustmentmenu.

• Displaysthebrightnessadjustmentmenu.(Press

or toadjustbrightness.)

5.

button Turnsthepoweronoroff.

6. Powerindicator Indicatesthemonitor’soperationstatus.

Blue:OperatingOrange:PowersavingmodeOFF:Poweroff

7. USBport(UP)

(forFDX1501Tonly)

ConnectsaUSBcablewhenthisproductisusedasatouchpanelmonitor.

8. Inputsignalconnector Left:D-Submini15-pinconnector/Right:DVI-Dconnector

9. Powerconnector Left:DCpowerterminalblock/Right:Powerjack(DC-IN)

10. Buttonextensionconnector Thisisanextensionconnectorforusingtheexternalcontrolbuttons.

11. Screwholesforsecuring

theclamper(2)

Attachtheclampertopreventthecablefromfallingoff.

Fitthecableintheclamperandtitwiththesetscrew(M4×12),asshownin

thediagramabove.

*

ScreenManagerisanEIZO’snicknameoftheAdjustmentmenu.ForhowtouseScreenManager,refertotheMonitor

User’sManual(ontheCD-ROM).

4

Assembly

Attention

• Before mounting the monitor into the enclosure, please perform all settings and adjustments of the monitor, and

installation of the touch panel driver.

Chassismounttype

●

Exteriorview

FDX1501

63 (2.48)

174 (6.9)

73.7 (2.90)

Display area

343 (13.5)

7.2 (0.28)

303 (11.9)

20 (0.79)

63 (2.48) 1 (0.04)

33 (1.3)

357.4 (14.1)

273.4 (10.8)

304.1 (12.0)

228.1 (9.0)

348.2 ± 1 (13.7 ± 0.04)

100 (3.9)

24 (0.94)

104.1 (4.1)

100 (3.9)

127 (5.0)

100 (3.9)

9.7 (0.38)

18 (0.71)

64.7 (2.55)

129.5 (5.1)

18 (0.71)

144

± 0.5

(5.7

± 0.02

)

4.5×6 (0.18×0.24)

D-Sub mini 15-pin connector

Power jack (DC-IN)

DC power terminal block

(Power specifications: see *1 in the next page)

DVI-D connector

M4 (VESA

mounting holes)

M4 (Screw holes for

securing the clamper)

Button extension connector

(Connector specifications: see *2 in the next page)

(Enclosure mounting holes)

FDX1501T

307.2

(12.1)

231.2

(9.1)

343 (13.5)

7.2 (0.28)

303 (11.9)

20 (0.79)

63 (2.48)

1 (0.04)

31 (1.22)

357.4 (14.1)

26.2 (1.03)

273.4 (10.8)

22.2

(0.87)

22.2

(0.87)

304.1 (12.0)

229 (9.0)

305 (12.0)

Display area

228.1 (9.0)

174 (6.9)

63 (2.48)

73.7 (2.90)

127 (5.0)

100 (3.9)

104.1 (4.1) 100 (3.9)

64.7 (2.55)

144

± 0.5

(5.7

± 0.02

)

18 (0.71)

9.7 (0.38)

18 (0.71)

129.5 (5.1)

348.2 ± 1 (13.7 ± 0.04)

100 (3.9)

24 (0.94)

Display area

4.5×6 (0.18×0.24)

D-Sub mini 15-pin connector

Power jack (DC-IN)

DC power terminal block

(Power specifications: see *1 in the next page)

DVI-D connectorUSB port (UP)

M4 (VESA

mounting holes)

M4 (Screw holes for

securing the clamper)

Button extension connector

(Connector specifications: see *2 in the next page)

(Enclosure mounting holes)

Dimension available for touch panel input

unit : mm (inch)

5

English

*1

DCpowerterminalblock

ConnectorPinAssignment Powersequencing

PinNo. Signal

1 DC12V

2 DET

*

3 Ground

*

Notconnected

*2

Buttonextensionconnector:S3B-PH-SM4-TB(LF)(SN)(JST)

ConnectorPinAssignment

PinNo. Signal

1 KEY0

2 KEY1

3 Ground

●

Howtoassemble

1. Fasten the screws through the enclosure mounting holes of the monitor (2 each on the left and right sides)

into the enclosure.

Attention

• Please prepare screws that have a diameter of 3 mm and are suitable for use with the enclosure.

(Screws are not included with the monitor.)

6

Panelmounttype

●

Exteriorview

FDX1501

unit : mm (inch)

307.2 (12.1)37.9 (1.49) 37.9 (1.49)

383 (15.1)

42.9 (1.69)

231.2 (9.1)

56.9 (2.24)

331 (13.0)

21.8 (0.86) 339.4 (13.4)

21.8 (0.86)

303 (11.9)

63

(2.48)

158.5 (6.2)172.5 (6.8)

287.3 (11.3)

273.2 (10.8)

174 (6.9)

87.6 (3.45)

21.9 (0.86)

104.1 (4.1) 100 (3.9)

129.5 (5.1)

9.7 (0.38)

162.8 (6.4)

289

±

0.5 (11.4

±

0.02)

100 (3.9) 68.2 (2.69)

341

±

0.5 (13.4

±

0.02)

141.5 (5.6) 100 (3.9) 141.5 (5.6)

24 (0.94)

1 (0.04)

32 (1.26)

18.2 (0.72)18.2 (0.72)

MAX.22 (0.87)

MAX.22

(0.87)

MAX.22

(0.87)

Panel opening dimensions

6

(0.24)

M4 (Screw holes for

securing the clamper)

Button extension connector

(Connector specifications: see *2 in the next page)

D-Sub mini 15-pin connector

Power Jack (DC-IN)

DC power terminal block

(Power specifications: see *1 in the next page)

DVI-D connector

M4 (VESA mounting holes)

FDX1501T

unit : mm (inch)

307.2 (12.1)37.9 (1.49) 37.9 (1.49)

383 (15.1)

42.9 (1.69)

231.2 (9.1)

56.9 (2.24)

331 (13.0)

21.8 (0.86) 339.4 (13.4)

21.8 (0.86)

303 (11.9)

63

(2.48)

158.5 (6.2)172.5 (6.8)

287.3 (11.3)

273.2 (10.8)

174 (6.9)

87.6 (3.45)

21.9 (0.86)

104.1 (4.1) 100 (3.9)

129.5 (5.1)

9.7 (0.38)

162.8 (6.4)

289

±

0.5 (11.4

±

0.02)

100 (3.9) 68.2 (2.69)

341

±

0.5 (13.4

±

0.02)

141.5 (5.6) 100 (3.9) 141.5 (5.6)

24 (0.94)

1 (0.04)

32 (1.26)

18.2 (0.72)18.2 (0.72)

MAX.22 (0.87)

MAX.22

(0.87)

MAX.22

(0.87)

Panel opening dimensions

6

(0.24)

D-Sub mini 15-pin connector

Power Jack (DC-IN)

DC power terminal block

(Power specifications: see *1 in the next page)

DVI-D connectorUSB port (UP)

M4 (VESA mounting holes)

M4 (Screw holes for

securing the clamper)

Button extension connector

(Connector specifications: see *2 in the next page)

7

English

*1

DCpowerterminalblock

ConnectorPinAssignment Powersequencing

PinNo. Signal

1 DC12V

2 DET

*

3 Ground

*

Notconnected

*2

Buttonextensionconnector:S3B-PH-SM4-TB(LF)(SN)(JST)

ConnectorPinAssignment

PinNo. Signal

1 KEY0

2 KEY1

3 Ground

●

Howtoassemble

Attention

• Since the panel mounted on the monitor is tightened with a metal panel tting screw, please make the

selection considering the following points.

- Flat

- A thickness of 5 mm

- A structure having the strength to support xing with the screw.

1. Insert the monitor into the mount opening of the panel from the front.

The dimensions of a tting opening are the “Panel opening dimensions” shown in the exterior view.

Mount opening (Panel opening dimensions):

341±0.5mm × 289±0.5mm

8

2. Fit the included metal panel ttings onto the monitor (8 locations).

Metal panel fitting

3. Tighten the screws of the metal panel ttings with a prescribed torque of 0.6-0.7 N·m.

9

English

DisplayingtheScreen

1.

Press toturnonthemonitor.

The monitor’s power indicator lights up blue.

2.

TurnonthePC.

The screen image appears.

If an image does not appear, refer to “No picture” (page 10) for additional advice.

If using the FDX1501T proceed with installation and calibration of the touch panel driver.

Attention

• Turn off the monitor and PC after using them.

• For the maximum power saving, it is recommended that the Power button be turned off. Unplugging the power cord

completely shuts off power supply to the monitor.

InstallingtheTouchPanelDriver(FDX1501T)

Attention

• The user account to be used for installing the touch panel driver must have the “Administrators” privilege.

• When reinstalling the touch panel driver to update the driver, etc., restart the PC after uninstalling the driver and then

install it.

1.

Uninstalltheothertouchpaneldriver,ifitisinstalled.

2.

InstallthetouchpaneldriveraccordingtotheinstructionsincludedintheCD-

ROM.

For how to install the touch panel driver, see the Touch Panel Driver User’s Manual (on the CD-ROM).

3.

UsetheUSBcable(MD-C93)toconnectthemonitorandthePC.

USB

4.

RestartthePC.

CalibratingtheMonitor(FDX1501T)

Calibrate the monitor according to the Touch Panel Driver User’s Manual (on the CD-ROM).

Connectors

onthePC

Connectors

onthemonitor

USBCableMD-C93(supplied)

10

Troubleshooting

●

Nopicture

If a problem still remains after applying the suggested remedies, contact your local dealer.

Problem Possiblecauseandremedy

1. Nopicture

• Powerindicatordoesnotlight.

• Checkwhetherthepowercordisconnected

properly.

• Press

.

• Powerindicatorislightingblue. • Increase<Brightness>,<Contrast>,and/or<Gain>

intheAdjustmentmenu.

• Powerindicatorislightingorange. • Switchtheinputsignal.

• Operatethemouseorkeyboard.

• CheckwhetherthePCisturnedon.

2. Themessagebelowappears. Thismessageappearswhenthesignalisnotinput

correctlyevenwhenthemonitorfunctionsproperly.

• Thismessageappearswhennosignalis

input.

Example:

• Themessageshownleftmayappear,because

somePCsdonotoutputthesignalsoonafter

power-on.

• CheckwhetherthePCisturnedon.

• Checkwhetherthesignalcableisconnected

properly.

• Switchtheinputsignal.

• Themessageshowsthattheinputsignalisout

ofthespeciedfrequencyrange.(Suchsignal

frequencyisdisplayedinred.)

Example:

fD: Dotclock

(Displayedonlyduringdigitalsignalinput)

fH: Horizontalscanfrequency

fV: Verticalscanfrequency

• CheckwhetherthePCisconguredtomeetthe

resolutionandverticalscanfrequencyrequirements

ofthemonitor(“CompatibleResolutions”inthe

SetupManual.).

• RebootthePC.

• Selectanappropriatedisplaymodeusingthe

graphicsboard’sutility.Refertothemanualofthe

graphicsboardfordetails.

Note

• If there is a problem with the image displayed or with the touch panel, refer to the Monitor User’s Manual (on the CD-

ROM).

Page is loading ...

Eizo DURAVISION FDX1501 User manual

Eizo DURAVISION FDX1501 User manual

in other languages

Related papers

Other documents