ICP tM-AD5C Quick start guide

ICP
Brand
ICP
Model
tM-AD5C
Type
Quick start guide

ICP tM-AD5C is a 5-channel isolated current input module that provides a programmable input range on all analog inputs (+/- 20 mA, 0 ~ 20 mA, 4 ~ 20 mA). This allows you to connect a variety of sensors and transducers to the module, making it ideal for a wide range of applications.

The tM-AD5C also features 4 KV ESD protection and 2500 Vrms intra-module isolation, making it suitable for use in harsh industrial environments. The module's sampling rate is adjustable and is available in either fast or normal mode, allowing you to optimize the module's performance for your specific application.

ICP tM-AD5C is a 5-channel isolated current input module that provides a programmable input range on all analog inputs (+/- 20 mA, 0 ~ 20 mA, 4 ~ 20 mA). This allows you to connect a variety of sensors and transducers to the module, making it ideal for a wide range of applications.

The tM-AD5C also features 4 KV ESD protection and 2500 Vrms intra-module isolation, making it suitable for use in harsh industrial environments. The module's sampling rate is adjustable and is available in either fast or normal mode, allowing you to optimize the module's performance for your specific application.

tM-AD5C 5-channel current input module- QuickStart (Nov/2016)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
1
tM-AD5C
5-channel Isolated Current Input Module
Quick Start Guide
Product Website:
http://www.icpdas-usa.com/tm_ad5c.html
http://www.icpdas-usa.com/dcon_utility_pro.html
1. Introduction
The tM-AD5C is an analog input module that includes 5 differential analog input
channels and provides a programmable input range on all analog inputs (+/- 20 mA, 0 ~
20 mA, 4 ~ 20 mA). The sampling rate of the tM-AD5C is adjustable and is available in
either fast or normal mode and It also provides 4 KV ESD protection as well as 2500
Vrms intra-module isolation.
2. Terminal Assignment
tM-AD5C 5-channel current input module- QuickStart (Nov/2016)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
2
3. Block/ Wiring Diagram
• Use 26-12 AWG wire for signal
connections.
• Strip the wire to a length of 7±0.5mm.
• Use a crimp terminal for wiring.
• Avoid high-voltage cables and power
equipment as much as possible.
• For RS-485 communication, use
insulated and twisted pair 24 AWG
wire, e.g. Belden 9841.
4. Default Settings
Default settings for the tM-AD5C are as follows:
。 Protocol: Modbus RTU
。 Module Address: 01
。 Current Input Type: type code 0D, -20mA to 20mA
。 Baud Rate: 9600 bps
tM-AD5C 5-channel current input module- QuickStart (Nov/2016)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
3
5. Configuration
To install the module, follow the steps below:
1. Connect the thermistor analog input.
2. Connect the module to the RS-485 network using the DATA+ and DATA- terminals.
3. Connect the module to the power supply using the +Vs and GND terminals. Note that
the voltage supplied should be in the range of +10 to +30V DC.
tM-AD5C 5-channel current input module- QuickStart (Nov/2016)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
4
4. Open DCON utility pro
click on COM port(first icon).
It can select multi-options such as Baud Rate, Protocol, Checksum, and Format to
search module. The default settings for the module can be found in Section 3. Click OK
after selecting the COM port setting.
tM-AD5C 5-channel current input module- QuickStart (Nov/2016)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
5
5. DCON utility pro will search for the selected COM port according the setting
previously set. DCON Utility Pro supports DCON and Modbus protocol for all ICPDAS
and the others modules.
6. Configuration I/O module setting on PC
tM-AD5C 5-channel current input module- QuickStart (Nov/2016)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
6
7. The Modbus RTU communication protocol is the default protocol of the tM series.
The communication Baud Rates for the Modbus RTU protocol can be in the range of
1200 bps to 115200 bps
8. If user doesn’t know command, user can select Address and ID, it will show some
refer commands as below. User can select necessary command to test or debug
modules.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

ICP tM-AD5C Quick start guide

ICP
Brand
ICP
Model
tM-AD5C
Type
Quick start guide

ICP tM-AD5C is a 5-channel isolated current input module that provides a programmable input range on all analog inputs (+/- 20 mA, 0 ~ 20 mA, 4 ~ 20 mA). This allows you to connect a variety of sensors and transducers to the module, making it ideal for a wide range of applications.

The tM-AD5C also features 4 KV ESD protection and 2500 Vrms intra-module isolation, making it suitable for use in harsh industrial environments. The module's sampling rate is adjustable and is available in either fast or normal mode, allowing you to optimize the module's performance for your specific application.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents