Commax CIOT-L7FM Owner's manual

Brand: Commax

Model: CIOT-L7FM

Category: Door intercom systems

Type: Owner's manual

• Thank you for purchasing COMMAX products.

• Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow

instructions to use a product exactly.

• The company is not responsible for any safety accidents caused by abnormal operation of the product.

• Thank you for purchasing COMMAX products.

• Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow

instructions to use a product exactly.

• The company is not responsible for any safety accidents caused by abnormal operation of the product.

CIOT-L7FM

User Manual

513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea

Int’l Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-2133

Web site : www.commax.com

Printed In Korea / 2014.02.104

PM0271AS0010



Table of Contents

PB 1

Warnings and caution ························································· 2

1. Name of each parts ························································· 4

2. Screen description ························································· 5

2.1 Status Bar ······························································ 5

2.2 Display ·································································· 5

3 Guard station call ··························································· 6

4. Household call ······························································· 7

4.1 The number of building is specied ······························· 7

4.2 The number of building is not specied ·························· 8

5. Access authentication ······················································ 9

5.1 Access to RF card ···················································· 9

5.2 Access by household password ···································· 9

5.2.1 The number of building is specied ·························· 9

5.2.2 The number of building is not specied ···················· 10

5.2.3 Access by password in off-line ······························ 11

6. Registering eKey for Smartphone and Door Release ················ 12

6.1 Registering eKey for Smartphone ································· 12

6.2 Lobby Entrance Release ············································ 13

7. Name Search································································ 14

Environment Conguration ··············································· 15

8.1 Password Reset ······················································ 16

8.2 Conguration Menu ·················································· 17

8.2.1 Set Network+····················································· 17

8.2.2. Set VoIP+ ························································ 17

8.2.3. Management+ ··················································· 17

8.2.4. Audio/Video+ ··················································· 17

8.2.5. Extra Cong+ ··················································· 18

8.2.6. Database+ ······················································· 19

8.2.7. System Info+ ···················································· 19

8.2.8. Test+ ····························································· 19

9. Wiring ········································································ 20

Cleaning & Use

Please don’t disassemble,

repair or rebuild this product

arbitrarily (please contact the

service center if a repair is

needed.

·It may cause an electric

shock or fire.

Please plug the power cable

firmly into the inner end

·It may cause a fire.

Please hold the plug tightly

when unplugging the power

cable (a part of the copper

wire may be disconnected if

the grabbing is only made on

the cord when pulling out the

cable).

·It may cause an electric

shock or fire

When connecting the power

cables after cutting the cable,

please install the product with

power off

·It may cause an electric

shock or fire

When installing the product,

please fix it firmly while using

the wall-mounting unit and

screws.

·It may cause an injury from

the falling object.

Please be careful when using

an AC circuit breaker since

there is a possibility of an

electric shock.

When cleaning the product,

please rub it with a soft and

dry cloth after plugging out

the power cable. (Please don’t

use any chemical products

such as wax, benzene, alcohol

or cleanser.)

Please don’t drop the product

on the ground and don’t apply

a shock .

·It may cause a failure.

Please use the designated

connection cable within the

maximum calling distance

designated for the product

·It may reduce the product

performance.

Please check the use voltage

and current for the DC-only

products and use the

appropriate rectifier.

·It may cause a fire.

Please avoid direct rays of the

sun or heating devices at a

time of installation.

·It may cause a fire.

Please don’t install the

product on an unstable place

or small support board.

·It may cause an injury if it

falls down while in use.

If an abnormal sound, burning

smell or smoke is coming out

of the product, please plug out

the power cable and contact a

service center.

·It may cause an electric

shock or fire.

Please don’t insert any

metallic or burnable materials

into the ventilation hole.

·It may cause an electric

shock or fire.

Please use only the designated

batteries for the products of

using DC power.

·It may cause an electric

shock or fire.

Cleaning & UsePower & Installation

Warning

Caution

Warnings and caution

Please follow the things described below in order to prevent any

danger or property damage.

Warning

Caution

Prohibition.

No disassembly

No touch

Must follow strictly.

Shows plugging out the power cord

without an exception

Shows the warning and caution for an electric shock.

Shows the warning and caution for a fire.

It may cause a serious damage or

injury if violated.

It may cause a minor damage or

injury if violated.

Power & Installation

Warning

Please don’t use several

products at the same time on

one power socket.

·It may cause a fire due to an

abnormal overheating.

Please don’t bend the power

cable excessively or it may

cause an electric shock.

·fire when using a damaged

power cable.

Please don’t handle the power

cable with a wet hand.

·It may cause an electric

shock.

Please plug out the power

cable from the socket when

not using it for a long period

of time.

·It may shorten the product

lifespan or cause a fire.

Please don’t install the

product in the place where

there is much oil, smoke or

humidity.

·It may cause an electric

shock or fire.

Please don’t install the

product with the lightening

and thunder.

·It may cause an electric

shock or fire.

Please don’t use and connect

this product with other

products with different rated

voltage

·It may cause a disorder or

fire.

When installing the product

that generates heat, please

install the product away from

the wall (10cm) for the

ventilation.

·It may cause a fire due to

the increased internal

temperature.

Cleaning & Use

Please don’t disassemble,

repair or rebuild this product

arbitrarily (please contact the

service center if a repair is

needed.

·It may cause an electric

shock or fire.

Please plug the power cable

firmly into the inner end

·It may cause a fire.

Please hold the plug tightly

when unplugging the power

cable (a part of the copper

wire may be disconnected if

the grabbing is only made on

the cord when pulling out the

cable).

·It may cause an electric

shock or fire

When connecting the power

cables after cutting the cable,

please install the product with

power off

·It may cause an electric

shock or fire

When installing the product,

please fix it firmly while using

the wall-mounting unit and

screws.

·It may cause an injury from

the falling object.

Please be careful when using

an AC circuit breaker since

there is a possibility of an

electric shock.

When cleaning the product,

please rub it with a soft and

dry cloth after plugging out

the power cable. (Please don’t

use any chemical products

such as wax, benzene, alcohol

or cleanser.)

Please don’t drop the product

on the ground and don’t apply

a shock .

·It may cause a failure.

Please use the designated

connection cable within the

maximum calling distance

designated for the product

·It may reduce the product

performance.

Please check the use voltage

and current for the DC-only

products and use the

appropriate rectifier.

·It may cause a fire.

Please avoid direct rays of the

sun or heating devices at a

time of installation.

·It may cause a fire.

Please don’t install the

product on an unstable place

or small support board.

·It may cause an injury if it

falls down while in use.

If an abnormal sound, burning

smell or smoke is coming out

of the product, please plug out

the power cable and contact a

service center.

·It may cause an electric

shock or fire.

Please don’t insert any

metallic or burnable materials

into the ventilation hole.

·It may cause an electric

shock or fire.

Please use only the designated

batteries for the products of

using DC power.

·It may cause an electric

shock or fire.

Cleaning & UsePower & Installation

Warning

Caution

2. Warnings and caution

Please follow the things described below in order to prevent any

danger or property damage.

Warning

Caution

Prohibition.

No disassembly

No touch

Must follow strictly.

Shows plugging out the power cord

without an exception

Shows the warning and caution for an electric shock.

Shows the warning and caution for a fire.

It may cause a serious damage or

injury if violated.

It may cause a minor damage or

injury if violated.

Power & Installation

Warning

Please don’t use several

products at the same time on

one power socket.

·It may cause a fire due to an

abnormal overheating.

Please don’t bend the power

cable excessively or it may

cause an electric shock.

·fire when using a damaged

power cable.

Please don’t handle the power

cable with a wet hand.

·It may cause an electric

shock.

Please plug out the power

cable from the socket when

not using it for a long period

of time.

·It may shorten the product

lifespan or cause a fire.

Please don’t install the

product in the place where

there is much oil, smoke or

humidity.

·It may cause an electric

shock or fire.

Please don’t install the

product with the lightening

and thunder.

·It may cause an electric

shock or fire.

Please don’t use and connect

this product with other

products with different rated

voltage

·It may cause a disorder or

fire.

When installing the product

that generates heat, please

install the product away from

the wall (10cm) for the

ventilation.

·It may cause a fire due to

the increased internal

temperature.

2 3

1) Operation and inspection

All the equipment which is completed the wiring should be appropriate for below each

statement.

2) State on standby

If the power is on, the model name and version will be displayed with LED turned on.

1) Contrast : contrast adjustment (adjust it appropriately with UP/DOWN button)

2) Brightness : brightness adjustment (adjust it appropriately with UP/DOWN button)

3) Color : color adjustment (adjust it appropriately with UP/DOWN button)

4) Reset : initialize every setting value.

5) Screen-Mode : set the proportion of screen. (FULL screen/ 4:3 screen)

6) Save& Exi : save the setting value and end the screen adjustment.

* Screen brightness/concentration/color are adjustable with MENU switch while video calling.

* After moving to the relevant item with the UP/DOWN button, it is adjustable by pressing

SELECT button.

Contrast

[CONTROL MENU]

Brightness

Color

Reset

Screen-Mode FULL / 4:3

Save & Exit

4. Operation and Reset

5. Screen adjustment function

 0COGQHGCEJRCTVU



uUG wG uUG wG

XG jhtlyhG ]G

vGVGjGGOuvSujP

YG {v|joGzjylluG ^G shuGG

ZG ګۍۊۓۄۈۄۏ۔ٻzG _G G

[G ympkG `G G

\G kjGX[}G XWG G



CONTENTS CONTENTS CONTENTS

•

Receiver volume control : Control the voice level coming from the outside unit.

•

volume control : Control the call sound volume from the outside.

MICROPHONE

RECEIVER VOLUME CONTROL

CALL VOLUME CONTROL

MENU(MENU SWITCH)

SELECT(SELECT BUTTON)

UP BUTTON

DOWN BUTTON

POWER SWITCH

PROGRAM DOWNLOAD

MASTER CONNECTION

DC POWER_INPUT



3. Part name and function

SPEAKER

POWER AND DISPLAY LED

MONITORING BUTTON

GUARD CALL BUTTON

CALL BUTTON

PRIORITY CALL/MASTER CALL

DOOR OPEN&CLOSE/WIRELE SS PHONE CALL

4 5

 5ETGGPFGUETKRVKQP



 5VCVWU$CT

+EQP &GUETKRVKQP +EQP &GUETKRVKQP



The status of LAN

connection



Status registered on server



Outside lobby phone 



Failed to register with the server



/REE\SKRQHLQWKHEXLOGLQJ



The status of local server

connection



The status of RF card data

storage



Hot line motion indication



BLE connection status



  &KURNC[

£ 7LPH6KRZFXUUHQWWLPH

¤ &LUFXPVWDQFHVHWWLQJ/REE\SKRQHVHWWLQJ

¥ %XLOGLQJGLVSOD\7KHEXLOGLQJVHWRQWKHOREE\SKRQH2XWVLGHOREE\SKRQHLV

¦ /REE\ QXPEHU GLVSOD\  Lobby phone numberIf there are more than 3 digits, only 2 digits are

displayed.

§ Household password authenticationOpen the door after verifying household password

¨ *XDUGVWDWLRQFDOO*XDUGVWDWLRQFDOO

ª +RXVHKROGFDOO+RXVHKROGFDOO



1) Being Paged from an Extension

The Call lamp will blink and a Melody tone will sound when being paged from an

extension. Press the Call button to answer the page, as indicated by the steadily lit Call

lamp. When finished with the conversation, press the Call button again to end the call.

2) Being Paged from the Household Porch while Connected to an Extension

a) A soft Chime tone will sound while connected to an extension, and the image of the

visitor will be displayed.

b) Press the Call button while staying connected with the extension. (LED will blink)

c) Press the Call button once more.

d) The current call will end and a new call will start.

3) Being Paged from the Common entrance while Connected to an Extension

a) A soft Chime tone will sound while connected to the extension, and the visitor's

image will be displayed on the screen.

b) Press the Call button while staying connected to the extension. (LED will blink)

c) Press the Call button once more.

d) The current extension call will end and a new call will start.

4) Incoming Call while Connected to an Extension

a) A soft Bell will sound while connected to the extension.

b) Press the Call button while staying connected to the extension. (LED will blink)

c) Press the Call button once more.

d) The current extension call will end and a new call will start.

※ Alarm function operates interlocked with other equipment while staying connected to

the extension.

1. Call with Master equipment: marked in only Master

2. Call with other Slave equipment: marked in the equipment which makes a call.

9. Ext. call function

3) Being Paged from the Common entrance while Connected to another Household

a) A soft Chime tone will sound while connected to another household, and the visitor will

be displayed on screen.

b) Press the Call button while staying connected to the other household. (LED will blink)

c) Press the Call button once more.

d) The current call will end and a new call will start.

 )WCTFUVCVKQPECNN



£ Press the 'Guard' button

¤ Call the guardZLWKDULQJWRQH

¥ Call the guardZLWKDULQJWRQH

¦ Make a call when you get answer from the guard room&DOOWLPHPLQXWH

§ Press the button on the screen to end the call.

¨ If you press the "Open Door" button in the guard room, the voice message "Door is open" will be

provided and then the door will open



Ȅ <RXFDQFDOOonly the guard station registered by the manager in advance.

※ When sound from the Household cannot be heard due to outside noise while talking

with the ntrance(individual, common), pressing the Priority Call button will block out the

excess noise and transmit the sound from the Household only to the entrance camera

or common entrance. Holding the Priority Call will transmit Household sound only to

camera. If you release the button, you can hear the sound from camera.

1) Being Paged by Other Households

The Call lamp will blink and a Melody tone will sound when being paged by another

household. Press the Call button to answer the page, as indicated by the steadily lit

Call lamp. When finished with the conversation, press the Call button again to end the

call.

2) Being Paged from the Individual entrance While in a Call with another Household

a) A soft Chime tone will sound while connected to another household, and the visitor

will be displayed on screen.

b) Press the Call button while staying connected to the other household.

(LED will blink)

c) Press the Call button once more.

d) The current call will end and a new call will start.

6. Priority Call

7. Telephone function

( When the call is finished, please end it by pressing the call button)

8. Talk with other households

1) Receiving a call

This device (videophone) supports only incoming calls, not outgoing. When an

incoming call is detected, the Call lamp will blink and a bell will ring. Press the Call

button to answer the call, as indicated by the steadily lit Call lamp.

2) Being Paged by the individual entrance While in a Call

a) A soft Chime tone will sound and the visitor will be displayed on screen.

b) Press the call button while in a call. (LED will blink.)

c) If you press the Call button again, a call with the Entrance will start.

3) Being Paged by the Common Entrance While in a Call

a) A soft Chime tone will sound while in conversation and the visitor will be displayed

on screen.

b) While in conversation, press the Call button. (LED will blink)

c) If you press the Call button again, a call with the Common Entrance will start.

4) Being Paged by the Guardhouse (or by another Household) While in a Call.

a) A soft Chime tone will sound.

b) Press the Call button while in conversation. (LED will blink)

c) If you press the Call button again, a call with the Guard station(or other households)

will start.

6 7

 *QWUGJQNFECNN



 6JGPWODGTQHDWKNFKPIKUURGEKHKGF

7he Call Prefix has the numberRIEXLOGLQJ 



£ Press 'Call House' button

¤ Enter the household number on the screen

¥  Press the (Call) button

¦ Call the householdZLWKDULQJWRQH

§ Make a call when you get answer from household&DOOWLPHPLQXWH

¨ Press the button on the screen to end the call.

and then the door will open



※ By pressing the door release button, door can be released while talking with

entrance(individual/common)

※ While calling with common entrance the call will be ended automatically after door

release.

12. Common entrance call function

13. Door release function

4) Incoming Call while Connected to the Entrance

a) Soft Bell will sound while connected to the entrance.

b) Press the Call button while connected to the entrance. (The Call lamp will blink)

c) Press the Call button again.

d) The current call will end, and a new call will start. (LED will turn on)

5) Monitoring the entrance

a) Press the monitoring button on stand-by mode (you can check the entrance)

b) End it by pressing the monitoring button once again.

While monitoring, make a call with entrance by pressing the call button.

When finished with the conversation, press the Call button to end the call.

1) Paging the Household Videophone from the Common entrance

a) Chime tone will sound, and the visitor will be displayed on screen.

(The screen will turn off 30 seconds after the page)

b) Press the Call button to answer.

(The call can be made for 1 minute from the moment of pressing the Call button)

c) Pressing the Open button while connected to the Common entrance will release it.

Press the Call button again to end.

2) Being Paged by the Household Porch while Connected to the Common entrance

a) Soft Chime will sound while connected to the Common entrance, and the Entrance

lamp will blink.

b) Press the Call button while connected to the Common entrance. (LED will blink)

c) Press the Call button again.

d) The current call will end, and a new call will start. (LED will turn on)

3) Incoming Call while Connected to the Common entrance

a) Soft Bell will sound while connected to the Common entrance.

b) Press the Call button while connected to the Common entrance. (LED will blink)

c) Press the Call button again.

d) The current call will end, and a new call will start. (LED will turn on)

 6JGPWODGTQHDWKNFKPIKUPQVURGEKHKGF

The Call Prefix has not numberRIEXLOGLQJ 



£ Press 'Call House' button

¤ Enter the number of building and household on the screen

¥  Press the (Call) button

¦ Call the householdZLWKDULQJWRQH

§ Make a call when you get answer from household&DOOWLPHPLQXWH

¨ Press the button on the screen to end the call. 

and then the door will open

1) Paging the Household Videophone from the Entrance

a) A Chime tone will sound, and the visitor will be displayed on screen.

(The screen will turn off 30 seconds after the page)

b) Press the Call button to answer.

(The call is limited to 1 minute from the moment of pressing the Call button)

When finished with the conversation, press the Call button to end the call.

2) Being Paged by the Guardhouse While Connected the Entrance

a) Soft Melody tone will sound while connected to the entrance.

b) Press the Call button while connected to the entrance. (LED will blink)

c) Press the Call button again.

d) The current call will end, and a new call will start. (LED will turn on)

3) Being Paged by the Common entrance While Connected to the Entrance

a) Soft Chime tone will sound while connected to the entrance.

b) Press the Call button while connected to the entrance. (LED will blink)

c) Press the Call button again.

d) The current call will end, and a new call will start. (LED will turn on)

10. Guard station call function

11. Individual entrance call function

1) Being Paged by the Guardhouse

The Call lamp will blink and a Melody tone will sound when being paged by the

Guardhouse. Press the Call button to answer the page, as indicated by the steadily lit Call

lamp. When finished with the conversation, press the Call button to end the call.

2) Being Paged by the Household Porch while Connected to the Guardhouse

a) A soft Chime tone will sound while connected to the Guardhouse, and the visitor will be

displayed on screen.

b) Press the Call button while staying connected to the Guardhouse. (LED will blink)

c) Press the Call button once more.

d) The current call will end and a new call will start.

3) Incoming Call while Connected to the Guardhouse

a) A soft Bell will sound while connected to the Guardhouse.

b) Press the Call button while staying connected to the Guardhouse. (LED will blink)

c) Press the Call button once more.

d) The current call will end and a new call will start.

4) Paging the Guardhouse

a) Press the Call button.( standby sound "toot” will be heard)

b) Press the Guard button. (Paging Time: 30 seconds)

c) When answered by the Guardhouse, register the household number and ext.

setting.

※ This guard station call function is used when you set the ext. number to this slave phone

when installing first. (using interlocked with Master and Guard station)

8 9

 #EEGUUCWVJGPVKECVKQP



  #EEGUUVQ4(ECTF 

£ Close the RF card registered in the card window

¤ If the authentication is successful, the voice message "Door opened" will be provided and the door will

open

¥ If the authentication fails, you can hear a blinking beep



>5)&DUG@

 #EEGUUD[JQWUGJQNFRCUUYQTF 

 6JGPWODGTQHDWKNFKPIKUURGEKHKGF

 7he Call Prefix has the numberRIEXLOGLQJ 



£ Press '3DVVFRUGEXWWRQ

¤ Enter the number of household on the screen

¥  Press the button

¦ Enter the password of household on the screen

§ Press the button

¨ If the authentication is successful, the voice message "Door opened" will be provided and the door will

open



17. How to use common entrance camera

1) To call the household

a) Press the household number ex) household 101 => 1,0,1

b) Household number appears on FND

c) Press the call button (E: shape of bell)

d) Conversation begins when household picks up the

phone.

2) Paging a guard station

a) Press the guard button(shape of police officer)

b) ‘Guard’ appears on FND.

c) Press the Call button(E: shape of bell)

d) ‘Guard’ blinks on FND with call sound.

e) Conversation begins when guard station pick up the

phone.

3) Opening the door with PIN

a) Press the household number.

b) Press the Key button(K: shape of key).

c) ‘PASS’ blinks on FND.

d) Press the household PIN.

e) ‘___’ appears on FND.

f) Press the Call button.

g) ‘OPEN’ message blinks on FND and door will open.

[Reference for use]

If you don’t recall household PIN, please contact a

guard station or management station.

Enter theHousehold Number.

Wait for a reply

Press the page button.

A paging tone will sound.

Press the

Call button (E).

ex) unit 101

ex) To open the door of unit 101

Press the Guard button.

Press the Page button.

A paging tone will sound.

Wait for a reply

Press the Call button (E).

Enter the Household Number.

Press the Electronic key button.

Enter the Household PIN.

Press the Page button.

Press the Call button (E).

 6JGPWODGTQHDWKNFKPIKUPQVURGEKHKGF 

7he Call Prefix has not the numberRIEXLOGLQJ 



£ Press '3DVVFRUGEXWWRQ

¤ Enter the number of building and household on the screen

¥  Press the button

¦ Enter the password of household on the screen

§  Press the button

¨ If the authentication is successful, the voice message "Door opened" will be provided and the door will

open

※ When the Away Mode is set from the Household, pages by visitors from the Common

entrance or Household Porch are automatically forwarded to the Guardhouse to be

answered by the Guard on duty.

※ Away Mode cannot be set with this Videophone, but enabling the Away Mode through

another videophone will have all pages from the Common entrance and the Household

Porch to be forwarded to the Guardhouse.

※ In case that you press the door release button and front call button at the same time,

"toot toot toot~” sound will be heard and initialization will be applied.

☞

Caution : On execution of

initialization function, all the information such as household

setting and screen adjustment.

※ Initial value of initialization

a) Building and household number: Building 1234 household number 5678

b) Ext. ID : 0

c) Receiving delivery service status: no delivery service reception

d) Guard talk time : 3 min

14. Master and wireless call function

15. Detour function

16. Factory Initialization function

1) How to call master related to extension number (Setting master ext. : no.1)

a) On standby mode, enter the call standby mode by pressing the call button. (sound

"toot”)

b) Press the priority call button. (calling Master)

2) How to call wireless phone related to extension number

(Setting wireless phone ext. : no.5)

a) On standby mode, enter the call standby mode by pressing the call button.

(sound "toot”)

b) Press the priority call button. (calling Master)

☞

Caution : in case of

door release and priority call button, it operates as original

function unless the call standby mode.

10 11

 #EEGUUD[RCUUYQTFKPQHHNKPG 

  /RFDOVHYHUFDQQRWEHFRQQHFWHG



£ Press '3DVVFRUGEXWWRQ

¤ Enter the OFF-Line password on the screen

¥  Press the button



Ȅ  :KHQ\RXDUH2Q/LQHZKHQWKHORFDOVHYHULVFRQQHFWHGWKLVDFFHVVGRQRWZRUN

Ȅ  <RXVKRXOGGHOHWH2II/LQHSDVVZRUGZKHQ\RXDUH2Q/LQH

18. Guard Security Alarm Function

19. Connection diagram

* This Videophone sounds alarms when emergency situations are detected, but those alarms

cannot be canceled through this unit.

* Please use other Videophones (With Cancel/Reset Feature) to cancel emergency alarms.

* This function is impossible to generate the sound which can be heard when interlocked with

other video phones.

1) Emergency : Pressing the Emergency button when needed will sound the corresponding

alarm (Electronic Gun) from the unit.

2) Warning 1 : The corresponding alarm (Fire Truck) will sound when Warning 1 is detected.

3) Warning 2 : The corresponding alarm (Ambulance) will sound when Warning 2 is detected.

4) Security : The corresponding alarm (Police Siren) will sound when burglar is detected.

☞

Caution : in case of alarm, it will sound loudly regardless of volume switch.

 4GIKUVGTKPIG-G[HQT5OCTVRJQPGCPF&QQT4GNGCUG



  4GIKUVGTKPIG-G[HQT5OCTVRJQPG



£ ,QSXWę%XLOGLQJDQG/REE\1RĚDW6PDUWSKRQHVDPHDV%XLOGLQJ1RRQ6FUHHQRI/REE\%XLOGLQJ

1RDQG/REE\1R'RRU1R

([

¤ ,QSXW1RRI$SDUWPHQW

¥ ,QSXW3DVVZRUGRI/REE\(QWUDQFH

¦ 3UHVVWKH5HJLVWHUEXWWRQ



Ȅ &DXWLRQ

<RXFDQĜWXVHWKHGHIDXOWSDVVZRUGRI:DOOSDGVXFKDV

<RXFDQĜWXVH1RDVWKH%XLOGLQJ$SDUWPHQW1XPEHU

LIH.H\LVIXOO\RXPXVWGHOHWHWKHH.H\DQGUHJLVWHULWDJDLQ0D[LPXQHNH\V

4) Registering household PIN

a) Press the Key button(K: shape of key)

b) Press program number ‘20’

c) Press the Call button(E: shape of bell). ‘hono’ message

blinks on FND.

d) Press the household number.

e) Press the Call button(E: shape of bell). ‘PASS’ message

blinks on FND.

5) When you want to open the door with wireless card

key(optional), put the distributed wireless card key(RF Card) to

the window at the bottom of camera lense. Then, door will

open with the message of ‘OPEN’ on FND.

[Reference for use]

①

If unregistered card comes close to the sensor,

guard station unit has to be informed the

situation automatically with the call. Please

②

If nothing has been changed, the card cannot

be used.

Press the Program button (P).

Press the

Call button (E).

Electronic Key button (K).

Press the Program Number (20).

Enter the old PIN. ex)1234

Enter the new Household PIN.

ex)3690

Household Number. ex) 101

Press the

Call button (E).

Press the

Call button (E).

Please the Card Here

OPEN DOOR

12 13

 .QDD['PVTCPEG4GNGCUG



£ 3UHVVWKH*UHHQ'RRU5HOHDVHEXWWRQ 

¤ 2QFH\RXĜUHFRQQHFWHGZLWKWKH/REE\GRRUZLOOEHUHOHDVHG



Ȅ &DXWLRQ

 ,I /REE\ (QWUDQFH 3DVVZRUGLV FKDQJHG RI .H\ 5HJLVWHUHG RQ /REE\ 3KRQH LV GHOHWHG \RX FDQĜW 5HOHDVH

2SHQWKH'RRU 

5HJLVWHUWKHH.H\DJDLQ



Ȅ &RQILJXUDWLRQRI%/(0RGXOH1DPH

%/(0RGXOH1DPH&RPELQDWLRQRI&DOO3UHIL[%XLOGLQJ&RQILJXUDWLRQDQG6\VWHP,'

,I6\VWHP,'H[FHHGGLJLWVMXVWWKHODVWGLJLWVZLOOEHGLVSOD\HG

2XWVLGH/REE\FDQĜWXVHWKH%/(IXQFWLRQV



කఁሽ໕ᆳ౅



໕ᆳෟછ໓෮ฅ

Condition Description Solution

- The power supply is not

on.

- All works are

stopped.missing or not.

1. The power supply cord is

missing or not.

2. The power supply

switch(down) is off or not.

1. Please connect the power

supply cord.

2. Please turn on the power

supply switch(down) pushing to

the right.

- A call operation is not

performed.(Door,

Interphone function)

- The product does not

produce the sound.(Call

volume, Talk volume)

1. The wiring between other units

is connected correctly in good

order or not.

2. The wiring is missing or not.

1. A sound volume lies in

minimum or not.

1. Please refer to connection

related page.

2. Please connect correctly to

the terminal.

Please adjust the sound

volume properly.

- The screen is dark.

- The screen is strange.

1. There is a strong

reflected light behind the

visitor or not.

2. The screen control is

adjusted correctly.

1. Please change the

angle of camera lens.

2. Adjust the screen.

* Please read the user manual carefully before reporting any problems with the

product.

* If the problem persists, please contact the Customer Service Center.

20. Installation and how to wiring

21. Check point

 0COG5GCTEJ



£ 3UHVV1DPH6HDUFKEXWWRQ

¤ 6HOHFWWKH1DPH\RXZDQWWRFDOOIURPWKH8VHU/LVW

¥  3UHVVWKH&DOOEXWWRQWRFDOOWRWKH5HVLGHQFH



කఁሽ໕ᆳ౅



໕ᆳෟછ໓෮ฅ

* How to wire

☞ When connecting the video cables to the household videophone, use the VD/IN, VD/OUT

method.

☞ Take caution when performing this polarity wiring. The videophone will not operate with

improper wiring.

☞ With distance over 10 meters between MASTER and the household videophone, use the

coaxial cable (3C2V) as the video cable.

☞ Device number (ID) of the SLAVE (Household Videophone) must be entered; if not, the unit

will not operate properly.

[Reference for use]

�

Videophone extension function

1. Enter the

SLAVE number. SLAVE number is the device number (ID) assigned to

each videophone when there are more than one videophones in a household

and cannot be overlapped.

2. Registered device number (ID) is identical to the number used in extension

paging and calling.

�

Registering SLAVE Number (ID)

1. How to use the Guard station unit

Remote Control Button while Connected to the Guardhouse

 Building Number  Building

Number (*)  Unit Number  Extension button

 SLAVE Number  Call Button(#)

2. How to use the Master phone

Preparation for entering the extension Number(Master)  Calling Guard station

Entering extension ID(entering Master)

14 15

 'PXKTQPOGPV%QPHKIWTCVKQP



£  3UHVVWKH6HWWLQJEXWWRQ

¤ ,QSXWWKH3DVVZRUG

¥  3UHVVWKH&RQILUPDWLRQEXWWRQ



Ȅ :HUHFRPPHQG\RXWRFKDQJHWKHGHIDXOWSDVVZRUGIRUVHFXULW\

Ȅ ,I\RXSUHVVWKH  +RPHEXWWRQ\RXFDQUHWXUQWRWKHGHIDXOWVFUHHQ

 3UHYLRXVEXWWRQ\RXZLOOUHWXUQWRWKHSUHYLRXVVWHSȄ ,I\RXSUHVVWKH



Spec

Model

CAV-71AS

MASTER 6 lines

14V , 700mA(MAX)

Hands free mode(Voice Switch circuit)

17.78 cm(7') COLOR TFT-LCD(digital)

- Entrance : two types of 3 tones electric chime bell

- Guard station : Melody

60±10 SEC(During conver sation), 30±10SEC(During monitoring)

MASTER : Ø 0.65 CABLE / 30m

0℃~+40℃

Transmission style

Power Source

Conversation

Display

Screen

Distance

Working Temperature

24. Specification

Call sound

  2CUUYQTF4GUGV



£  3UHVVWKH6HWWLQJEXWWRQ

¤ ,QSXWWKHGHIDXOWSDVVZRUG

¥ 3UHVVWKH(PSW\6SDFHRQWKHVFUHHQWRHQWHUWRWKH5HVHW0RGH

¦ (QWHUGHIDXOWSDVVZRUG

§  3UHVVWKH&RQILUPDWLRQEXWWRQ



Ȅ $IWHUUHVHWWKHSDVVZRUGZHUHFRPPHQG\RXWRFKDQJHWKHSDVVZRUGIRUVHFXULW\



කఁሽ໕ᆳ౅



໕ᆳෟછ໓෮ฅ

* How to wire

☞ When connecting the video cables to the household videophone, use the VD/IN, VD/OUT

method.

☞ Take caution when performing this polarity wiring. The videophone will not operate with

improper wiring.

☞ With distance over 10 meters between MASTER and the household videophone, use the

coaxial cable (3C2V) as the video cable.

☞ Device number (ID) of the SLAVE (Household Videophone) must be entered; if not, the unit

will not operate properly.

[Reference for use]

�

Videophone extension function

1. Enter the SLAVE number. SLAVE

number is the device number (ID) assigned to

each videophone when there are more than one videophones in a household

and cannot be overlapped.

2. Registered device number (ID) is identical to the number used in extension

paging and calling.

�

Registering SLAVE Number (ID)

1. How to use the Guard station unit

Remote Control Button while Connected to the Guardhouse

 Building Number  Building Number (*)  Unit Number  Extension

button

 SLAVE Number  Call Button(#)

2. How to use the Master phone

Preparation for entering the extension Number(Master)  Calling Guard station

Entering extension ID(entering Master)

  %QPHKIWTCVKQP/GPW

 5GV0GVYQTM

,3DGGUHVV,QSXW,3DGGUHVV

*:DGGUHVV,QSXW*DWHZD\DGGUHVV

'16DGGUHVV,QSXW'16DGGUHVV

1HWPDVN,QSXW1HWZRUN0DVN



 5GV8Q+2

6,36HUYHU,QSXW6,36HUYHUDGGUHVV

*XDUG,',QSXW*XDUG6WDWLRQ,'

 /CPCIGOGPV

6HUYHUDGGUHVV,QSXW/RFDO6HUYHUDGGUHVV

8SGDWHDGGUHVV,QSXW8SGDWH6HUYHUDGGUHVV

6\VWHP,',QSXW/REE\3KRQH,'

&DOO3UHIL[%XLOGLQJ&RQILJXUDWLRQ

,I%XLOGLQJFRQILJXUDWLRQYDOXHLVHPSW\ZKHQ\RXFDOOWRWKHUHVLGHQFHEXLOGLQJLQSXWVFUHHQZLOOEH



GLVSOD\HGDXWRPDWLFDOO\

&DOO/LQH

0LQ&DOO/LQH,QSXWPLQLPXPFDOOOLQH

0D[&DOO/LQH,QSXWPD[LPXPFDOOOLQH

&DXWLRQ,I0LQ&DOO/LQHLVJUHDWHUWKDQ0D[&DOO/LQHFDOOIXQFWLRQZLOOQRWEHDYDLODEOH

Ȅ ,I\RXFKDQJH6\VWHP,'DQG&DOO3UHIL[%/(0RGXOH1DPHZLOOEHFKDQJHG



 #WFKQ8KFGQ

$XGLR

*HQHU6SH9RO$GMXVWYROXPHRIVSHDNHUIRU&DOOWRUHVLGHQFH

*HQHU0LF9RO$GMXVWYROXPHRIPLFURSKRQHIRU&DOOWRUHVLGHQFH

*XDUG6SH9RO$GMXVWYROXPHRIVSHDNHUIRU&DOOWRJXDUGVWDWLRQ

*XDUG0LF9RO$GMXVWYROXPHRIPLFURSKRQHIRU&DOOWRJXDUGVWDWLRQ

*HQHU1XPEHU6SHHFK6HOHFWYRLFHEXWWRQIRU5HVLGHQFH%XLOGLQJ$SDUWPHQW

.H\6RXQG6HOHFWVRXQGHIIHFWIRUEXWWRQ

5LQJ6RXQG6HOHFWULQJWRQH

.H\9RO6HOHFWYROXPHIRUEXWWRQ

5LQJ9RO6HOHFWYROXPHIRUULQJWRQH

(IIHFW9RO6HOHFWYROXPHIRUVRXQGHIHFW

,QLWLDOL]DWLRQLQLWLDOL]DWLRQRI$XGLR

9DOXHV\RXPRGLILHGRQ$XGLR0HQXZLOOEHUHVWRUHGWRGHIDXOWYDOXHV

Spec

Model

CAV-71AS

MASTER 6 lines

14V , 700mA(MAX)

Hands free mode(Voice Switch circuit)

17.78 cm(7') COLOR TFT-LCD(digital)

- Entrance : two types of 3 tones electric chime bell

- Guard station : Melody

60±10 SEC(During conver sation), 30±10SEC(During monitoring)

MASTER : Ø 0.65 CABLE / 30m

0℃~+40℃

Transmission style

Power Source

Conversation

Display

Screen

Distance

Working Temperature

24. Specification

Call sound

9LGHR

4XDOLW\$GMXVWYLVLWRULPDJHTXDOLW\

<RXFDQVHOHFWEHWZHHQ000

Ȅ'DWDXVDJHZLOOLQFUHDVHLI4XDOLW\RI,PDJHLVKLJKHU

,QLWLDOL]DWLRQ9LGHRLQLWLDOL]DFLRQ

9DOXHV\RXPRGLILHGRQ9LGHR0HQXZLOOEHUHVWRUHGWRGHIDXOWYDOXHV



 'ZVTC%QPHKI

/DQJXDJH/DQJXDJH6HOHFW

6HW7LPH

'RRU2SHQ7LPH'RRU5HOHDVH7LPH

6HOHFWEHWZHHQVHFVHFVHFVHFVHFVHFRQGV

6OHHS0RGH7LPH&RQILJXUDWLRQRI/&'6OHHS0RGH

6HOHFWEHWZHHQVHFPLQPLQPLQPLQPLQXWHV

.H\7LPH2XW

6HOHFWEHWZHHQVHFaVHFLQXQLWVRIVHF

8VHKRXUIRUPDW

6HOHFWKRXUVW\SH

$'&6HQVRU

'LVWDQFH&KDQJHWKHUDQJHRIGLVWDQFHIRUSUR[LPLW\VHQVRU

:LWKGLUHFWOLJKWGLVWDQFHZLOOEHVKRUWHU

FPFPFPFPFPFPFPFP8QXVHG1RWXVH

'HWHFWLRQ+ROG7LPH&RQILJXUDWLRQIRUSUR[LPLW\VHQVRUGHWHFWLRQWLPH

PVPVPVPVPV

%/(,QWHQVLW\&RQILJXUDWLRQIRU%/(RXWSXW

VHWSVHWSVHWSVHWSVHWSVHWSVHWSVHWS

&KDQJH3ZG&KDQJHWKHSDVVZRUG

2II/LQH3ZG,QSXWWKHSDVVZRUGWRUHOHDVHWKH'RRUZKHQ\RXDUH2II/LQH

'HIDXOW2II/LQHSDVVZRUGLVęĚ

5HERRW5HLQLWLDOL]DWLRQRIWKH6\VWHP

6\VWHP5HVHW5HVHWWKHYDOXHVRIWKHV\VWHPWRIDFWRU\GHIDXOWYDOXHV

0RGLILHG,3LQIRUPDWLRQZLOOQRWWKHFKDQJHG



කఁሽ໕ᆳ౅



໕ᆳෟછ໓෮ฅ

* How to wire

☞ When connecting the video cables to the household videophone, use the VD/IN, VD/OUT

method.

☞ Take caution when performing this polarity wiring. The videophone will not operate with

improper wiring.

☞ With distance over 10 meters between MASTER and the household videophone, use the

coaxial cable (3C2V) as the video cable.

☞ Device number (ID) of the SLAVE (Household Videophone) must be entered; if not, the unit

will not operate properly.

[Reference for use]

�

Videophone extension function

1. Enter the SLAVE number. SLAVE number is

the device number (ID) assigned to

each videophone when there are more than one videophones in a household

and cannot be overlapped.

2. Registered device number (ID) is identical to the number used in extension

paging and calling.

�

Registering SLAVE Number (ID)

1. How to use the Guard station unit

Remote Control Button while Connected to the Guardhouse

 Building Number  Building Number (*)  Unit Number  Extension button

 SLAVE Number  Call Button(#)

2. How to use the Master phone

Preparation

for entering the extension Number(Master)  Calling Guard station

Entering extension ID(entering Master)



 &CVCDCUG

3DVVZRUG'RZQ'RZQORDGWKHSDVVZRUGRIUHVLGHQFH

5)&DUG'RZQ'RZQORDG5)&DUG'DWD

3DVVZRUG'HO'HOHWHWKHSDVVZRUGRIUHVLGHQFH

5)&DUG'HO'HOHWH5)&DUG'DWD



 5[UVGO+PHQ

9HUVLRQ9HUVLRQRI6RIWZDUHLVGLVSOD\HG

%RRW%RRW/RDGHULQIRUPDWLRQLVGLVSOD\HG

.HUQHO26LQIRUPDWLRQLVGLVSOD\HG



 6GUV 

7HVW'RRU2SHQ7HVWGRRUUHOHDVH

7HVW5)&DUG5)&DUGQXPEHULVGLVSOD\HG

8VHIXO)XQFWLRQZKHQ\RXZDQWWRNQRZ5)&DUGQXPEHU

&RQWDFWWKH&DUGWR&DUG5HDGHUZKHQ5HDGHULVLQ5HDGLQJđ0RGH

$'&6HQVRU7HVW3UR[LPLW\VHQVRULQIRUPDWLRQLVGLVSOD\HG

7HPS6HQVRU7HVW7HPSHUDWXUHVHQVRULQIRUPDWLRQLVGLVSOD\HG

<RXFDQYHULI\WKHIXQFWLRQDOLW\ZLWKę'HIURVWHU21Ě

6\VWHP,QLWLDOL]H,QLWLDOL]H6\VWHPVHQVRUV

Page is loading ...

Commax CIOT-L7FM Owner's manual

Brand: Commax

Model: CIOT-L7FM

Category: Door intercom systems

Type: Owner's manual

Download PDF

report

Commax CIOT-L7FM Owner's manual

Commax CIOT-L7FM Owner's manual

Related papers

Other documents