LG PRDSBM.ENCXIDA Installation guide

LG
Brand
LG
Model
PRDSBM.ENCXIDA
Type
Installation guide

LG PRDSBM.ENCXIDA is an outdoor dry contact device that can be used for a variety of purposes, such as:

  • Monitoring the status of a door or window
  • Controlling a light or other electrical device
  • Triggering an alarm

The device is easy to install and can be connected to an existing alarm system or other control device. It is also weatherproof and can be used in both indoor and outdoor applications.

Here are some of the key features of the LG PRDSBM.ENCXIDA:

  • Dry contact output: The device has a dry contact output that can be used to control a variety of electrical devices.
  • Weatherproof: The device is weatherproof and can be used in both indoor and outdoor applications.

LG PRDSBM.ENCXIDA is an outdoor dry contact device that can be used for a variety of purposes, such as:

  • Monitoring the status of a door or window
  • Controlling a light or other electrical device
  • Triggering an alarm

The device is easy to install and can be connected to an existing alarm system or other control device. It is also weatherproof and can be used in both indoor and outdoor applications.

Here are some of the key features of the LG PRDSBM.ENCXIDA:

  • Dry contact output: The device has a dry contact output that can be used to control a variety of electrical devices.
  • Weatherproof: The device is weatherproof and can be used in both indoor and outdoor applications.
Outdoor Dry Contact (PRDSBM) Installation Manual
1. Check the contents of Outdoor Dry Contact(PRDSBM).
2. Connect Outdoor Main PCB and Outdoor Dry Contact
-
Connect terminals(DRY1, DRY2, GND) on the back side of the outdoor dry contact to
terminals (DRY1, DRY2, GND) of outdoor as show below.
❈ Communication line length can be maximum 300m, use communication line as thick as
1.25mm
2
.
<Front Case>
<Outdoor Dry Contact Main Body>
1
2
3
4
1
2
3
4
shows field wiring
connected wiring
< Outdoor Main PCB >
<Outdoor Dry Contact Back Side >
Push Button
- Insert wire method -
Push arrow direction.
Insert wire to connector.
DRY1
DRY2
GND
DRY1 DRY2 GND
Pay attention to the wiring when the Push Button on the back side of Outdoor Dry
Contact is pressed and the wires are pulled out.
CAUTION
!
3. Outdoor dry contact com-
bines with switch box as
shown below
4. Attach the front case
Switch Box
5. Environmental information
P/No. : MFL69403712
1. When this crossed out wheeled bin symbol is depicted on the product and its
operator’s manual, it means the product is covered by the e-waste
Management and Handling Rules , 2011 and are meant to be recycled,
dismantled, refurbished or disposed off.
2. Dos
a. The product is required to be handed over only to the authorized recycle for
disposal.
b. Keep the product in isolated area, after it becomes non-functional/unrepairable
so as to prevent its accidental breakage.
Don’t
a. The product should not be opened by the user himself/herself, but only by
authorized service personnel.
b. The product is not meant for re-sale to any unauthorized agencies/scrap
dealer/kabariwalah.
c. The product is not meant for mixing into household waste stream.
d. Do not keep any replaced spare part(s) from the product in exposedarea.
3. Any disposal through unauthorized agencies/person will attract action under
Environment (Protection) Act 1986 .
4. This product is complied with the requirement of Hazardous Substances as
specified under Rule 13 (1) & (2) of the E-Waste (Management & Handling)
Rules, 2011.
5. To locate a nearest collection centre or call for pick-up (limited area only) for
disposal of this appliance, please contact Toll Free No. 1800-180-9999 for
details. All collection centre and pick up facilities are done by third parties with
LG Electronics India Pvt. Ltd. Merely as a facilitator.
For more detailed information , please visit : http://www.lge.com/in.
  • Page 1 1

LG PRDSBM.ENCXIDA Installation guide

LG
Brand
LG
Model
PRDSBM.ENCXIDA
Type
Installation guide

LG PRDSBM.ENCXIDA is an outdoor dry contact device that can be used for a variety of purposes, such as:

  • Monitoring the status of a door or window
  • Controlling a light or other electrical device
  • Triggering an alarm

The device is easy to install and can be connected to an existing alarm system or other control device. It is also weatherproof and can be used in both indoor and outdoor applications.

Here are some of the key features of the LG PRDSBM.ENCXIDA:

  • Dry contact output: The device has a dry contact output that can be used to control a variety of electrical devices.
  • Weatherproof: The device is weatherproof and can be used in both indoor and outdoor applications.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers