Sharp LC-70UI9362K Quick start guide

Sharp
Brand
Sharp
Model
LC-70UI9362K
Category
LED TVs
Type
Quick start guide
Quick Start Set Up Guide
For information on using the TV’s features, please refer to the Operating Instructions. (Available online to download.)
Quick & easy guide for setting up your TV
What is included in the box
Using the remote control
Setting up the TV for the  rst time - including attaching the stand
Connecting other devices to the Television
Need help setting up or using your TV?
Please contact the UK & ROI Helpline*
Telephone UK 0330 024 0803 or ROI 01443 3323
Online support at: www.umc-uk.co.uk
Email support at: ser[email protected].uk
*Calls to 0330 numbers are charged at standard call rates and are included as part of any bundled minutes with your
phone provider.
Calls to the ROI number are charged at the local call rate.
The telephone opening hours are Monday to Friday 8.30am to 6pm, Saturday 9am – 5pm.
Bank Holidays - 10am to 4pm
Closed Christmas and New Years day
Model Numbers
LC-70UI9362K
Trademark
Sharp
Model ID
LC-70UI9362K
Energy e ciency class A
Visible screen size (diagonal) 177 cm / 70 inches
On-mode power consumption 160.0 W
Annual energy consumption *1 234 kWh
Standby power consumption *2 <0.50 W
O mode power consumption
n/a
Screen resolution 3840 (H) x 2160 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television
operating 4 hours per day for 365 days. The actual energy consumption will depend on how the
television is used.
*2: When the TV is turned o with the remote control/standby button and no function is active.
Product  che
Additional Technical Information
LC-70UI9362K
RF 75 ohm Antenna / Analog / DVB / Satellite
Inputs 3 x HDMI2.0, 3 x USB, 1 x SD card reader,
1 x RJ45 LAN/Ethernet,
1 x Composite/CVBS Video & Component/YPbPr Input, 1 x L/R Audio input for
Composite/CVBS & Component YPbPr
Sound Outputs 1 x Digital Optical Audio output, 1 x 3.5mm Headphone
Speaker*/ Ampli er Watts (RMS) 2 x 10 + 15W Subwoofer / 2 x 8 + 15W Subwoofer
Voltage and power consumption
AC 220V ~ 240V; 50Hz
160/200/230W (home mode/standard/max)
(<0.5W in Standby)
Dimensions including stand (mm)
1562W x 975H x 334D
Net weight (Kgs) 32.5
Wall Mounting VESA 400 x 300 (mm)
*Built-in Harman Kardon speaker systems (Full-range speaker and tweeter).
Harman Kardon is trademark of HARMAN International Industries,
Incorporated, registered in the United States and/or other countries.
SHA/QSW/0041
Win a
Soundbar
Register your manufacturers guarantee online within 14 days of purchase at
www.registertoday.co.uk/sharp and enter into a prize draw to
Terms and conditions apply. Online registration only.
p
and
enter
into
a
prize
draw
to
n
ly
.
If wall mounting your television, please refer to the Operating Instructions.
Location of VESA mounting points
Technical Speci cation
REMOTE CONTROL
Sky Remote Code
If you wish to use your Sky remote to operate the TV’s basic
functions, you will need a Sky remote control (Revision 9 or later) and
you will need to program it with the code 2134. If you wish to use
your Sky Q remote to operate the TV’s basic functions, you will need
to program it with the code 4170.
Please save your box/packaging as you will need this in the event of warranty/service repair or support.
We are unable to carry out warranty/service if you are unable to package it correctly. The safest way to
package your item in the event of warranty/service repair is in it’s original box/packaging.
Re-packing the Television
If you need help setting up your TV or you require any technical support, in the  rst instance please contact
the helpline.
In the unlikely event you need to return the product to the store/retailer from where it was purchased or
you need warranty/service support, please ensure you package the item adequately in order that it does
not get damaged.
The best way to package it is in the original box.
Please take the following steps:
1) Remove the stand/feet from the TV.
2) Put all of the accessories that came with the TV in the box ensuring they are placed at the back of the TV.
(not near the screen/panel side) Note: In the event of warranty/service support, you do not need to send
the accessories/stand/feet.
3) Ensure the power cable / plug is located at the back of the TV (not on the screen/panel side)
4) Never put anything in the box on the screen/panel side of the TV as it’s likely to damage it.
1. 2.
1. Plug
2. Accessories pack
TV Panel/Screen
Both the plug and accessories pack must be placed at the rear of the TV.
Rear of TV
7
8
9
0
1
2
3
4
5
6
TV
GUIDE
VOL
CH
SOURCE
SOUND
PICTURE
ON/OFF
TEXT
SUBTITLE
INFO
TV
BACK
FAV
APPS
GO
TO
A
-B
3D
R
E
PEAT
R
EC LIST
PVR/MEDIA
EXIT
MENU
OK
MUTE
1
4
2
3
STANDBY - Switch on the TV when in standby or vice versa.
MUTE - Mute the sound or vice versa.
NUMBER BUTTONS - 0–9 to select a TV channel directly.
TV GUIDE - Opens the 7 day TV guide (digital TV mode).
- To return to the previous channel viewed.
VOL (+/-) - To increase/decrease the sound level.
PICTURE - Scrolls through picture mode options.
SOUND- Scrolls through sound mode options.
SOURCE - To display the input/source menu.
CH (+/-) - To increase or decrease the channel being watched.
MENU - To display OSD menu.
EXIT - To exit all menus.
( / / / / OK) - Allows you to navigate the on-screen menus and adjust
the system settings to your preference.
BACK - To go back a previous step.
FAV - To display favourites menu.
INFO - Press once for now/next channel information.
- Press twice for information about the current programme.
TEXT - To enter/exit Text.
SUBTITLE - To switch the dialogue at the bottom of the screen (on/off).
TV - To switch to Digital Channels.
YOUTUBE - Access the Youtube App.
NETFLIX - Access the Netfl ix App.
APPS - Access the APPS menu.
RECORD - Access the USB record function.
REC LIST - Opens the list of previously recorded items.
GOTO - To go to a specifi c chapter.
A-B - Press once to set point, press a second time to return to point.
ANGLE/3D - Select different angle of DVD.
REPEAT - To repeat playback.
- To restart the current chapter
- To advance forward to the next chapter
- To stop the playback/Eject Disc
(To EJECT the disc press/hold the button for 4 seconds)
- To play in fast rewind mode
- To play in fast forward mode
- To play/pause
Key
3
2
1
For models with integrated DVD players.
For models with PVR Function.
For models with USB Playback.
For models with 3D functions.
4
}
Microsoft PlayReady™
This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution
of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft.
Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property,
including copyrighted content. This device uses PlayReady technology to access PlayReady-protected content
and/or WMDRM-protected content. If the device fails to properly enforce restrictions on content usage,
content owners may require Microsoft to revoke the device’s ability to consume PlayReady-protected content.
Revocation should not a ect unprotected content or content protected by other content access technologies.
Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you
will not be able to access content that requires the upgrade.
Online Manual
To launch the Online Manual, press the [MENU] button and then select Settings>About TV>Help Information>
View Online Manual.
SHA-QSW-0041 LC-70UI9362K.indd 1SHA-QSW-0041 LC-70UI9362K.indd 1 16/11/2018 13:58:1416/11/2018 13:58:14
Connecting your set
4 First time installation
Introduction
When the set fi rst turns on, it enters the First Time Installation
mode. This can be restarted by restoring the set to default settings
in the ‘About TV’ Menu.
Country Selection
Select the correct fl ag for the country in which the set will be
used in. This will enable the set to correctly install the functions
applicable in the country of use.
Environment of Use
Home Mode: For normal use, by default it is set to a power saving mode
which reduces the energy used by up to 25% (by reducing the power to
the LED/LCD panel). This can be changed in the picture mode settings.
Network setup
You can connect the TV to your broadband router or wireless network in order
to take advantage of the Smart functions. If you connect the TV to your router
using an Ethernet cable (recommended) this step will be skipped.
Set Up Netfl ix
If you have a Netfl ix account, it can be set up on the television
here. Once set up and validated, the First Time Installation
returns to the next step.
Default Source
Select the source which you use the most. If Digital TV (Freeview) is chosen,
then at the next step, the set will tune in and default to Digital TV (Freeview).
If one of the other sources is selected, then the set will not tune in at this
stage and default to that input. If it is required to tune the set in later, press
the [MENU] button and then select Settings>Channels
Tune in Channels
Choose to install terrestrial channels now or later.
Support Advice
Information regarding support is displayed for a little while.
Tuning continues and a progress bar is shown with the number of
channels found indicated below.
If you are picking up signals from more than one transmitter, you
will be requested to select your primary and secondary regions.
1 2
3
4
5
6
7
8
9
Basic installation steps are shown below. These may vary slightly depending on model.
Note: In home mode,
the TV will switch off
automatically after 4
hours in the event that
no buttons are pressed on
the TV or remote control.
(You can change this
by pressing the [MENU]
button and then selecting
Settings>Time>Auto
Standby)
Languages
Select your preferred on-screen display language. This will change the language
in which the menus and associated information is displayed in. When set up has
been completed, to change this press the [MENU] button and then select Settings >
System Menu > Language
HDMI input 2.0
R
L
Ethernet/LAN* Network connection
Digital Audio Digital Optical Audio Output
USB 1 USB port 2.0
USB 2 USB port 2.0
L/R HDMI input
HDMI 1 HDMI input 2.0
Video/YPbPr
SAT IN Satellite input
RF in RF / TV aerial input
HDMI 3 HDMI input 2.0 (ARC)
USB 3 USB port 2.0
CI card in Common interface module
SD SD card input
Earphones Earphone input
Service Input
Setting up the TV set for the  rst time
Connectivity
1) Connect the TV to your power socket.
2) If you wish to use the TV to receive Freeview/Saorview channels, connect the RF input from
the TV to your outdoor Digital TV aerial. If you do not wish to receive Freeview/Saorview, skip
this step.
2
To receive Freeview channels, in particular
Freeview HD channels, you will need a
Digital TV aerial and be in a good Freeview
coverage area. You can check coverage for
your postcode at www.freeview.co.uk.
Please note that any Freeview HD channels
found during tuning will be placed in
channel positions above 100.
For example, 101 (BBC1 HD) 102 (BBC2 HD)
etc.
Outdoor Digital
TV Aerial
1.
2.
Used for attaching the stand
to the TV set ( g.2)
6 x
* The Ethernet/LAN port is used for Freeview HD services and smart functions.
Place the TV set on a fl at and clean surface
with the panel facing downwards to avoid
damage.
When the two feet are fi tted, they will appear
as in the picture above, with the tips of the feet
pointing away from each other.
When the stand/feet are in the correct position,
secure the feet to the underside of the TV set
using 6 screws provided.

EARPHONE
SAT I N
USB 3(2.0)
900mA MAX
ARC
K
N
O
3 Powering On the TV
Switch on the television by pressing the TV control stick
located on the TV set.
TV control stick
Insert the batteries supplied into the remote control and
press the standby button to power on the TV.
TV Control Stick
Remote Control:
Installing Batteries
A
H
L
K
B
I
M
C
D
E
F
G
J
1 (2.0) 2 (2.0)
ETHERNET
DIGITAL
AUDIO OUT
OPTICAL
L R VIDEO/Y
Pb Pr
5V
500mA MAX
USB 1 (2.0)
5V
500mA MAX
USB 2 (2.0)
A
B
C
D
E
F G
I
J
L
M
P
1 x Operating Instructions
1 x Quick Start Guide
1 x TV
1 x Stand installation pack
1 x Remote Control
1 x
RF Cable
2 x AAA Batteries
Fitting the stand
1
1
2
6 x
3
TV panel must be facing downwards.
What is included
in the box
Note: To complete the stand
installation you will require a
cross head screw driver.
UK Only. ROI Only.
To receive Saorview channels, in particular
Saorview HD channels, you will need a
Digital TV aerial and be in a good Saorview
coverage area. You can fi nd out more at
www.saorview.com.
Video Input (green) and HD input
(Ypbpr)
HDMI 2
Audio shared for Video/Composite
and component/ YPbPr
H
P
O
Input is used only by
service centres
N
SHA-QSW-0041 LC-70UI9362K.indd 2SHA-QSW-0041 LC-70UI9362K.indd 2 16/11/2018 13:58:1716/11/2018 13:58:17
  • Page 1 1
  • Page 2 2

Sharp LC-70UI9362K Quick start guide

Sharp
Brand
Sharp
Model
LC-70UI9362K
Category
LED TVs
Type
Quick start guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents