Cocraft BLR01-R3-300 Original Instructions Manual

ENGLISHSVENSKANORSKSUOMIDEUTSCH

Important!

Read the entire instruction manual

carefully and make sure that you fully

understand it before you use the

equipment. Keep the manual for future

reference.

Viktig information:

Läs hela bruksanvisningen noggrant och

försäkra dig om att du har förstått den

innan du använder utrustningen. Spara

bruksanvisningen för framtida bruk.

Viktig informasjon:

Les disse anvisningene nøye og forsikre

deg om at du forstår dem, før du tar

produktet i bruk. Ta vare på anvisningene

for seinere bruk.

Tärkeää tietoa:

Lue nämä ohjeet huolellisesti ja varmista

että olet ymmärtänyt ne, ennen kuin

alat käyttää laitetta. Säilytä ohjeet

myöhempää tarvetta varten.

Wichtiger Hinweis:

Vor Inbetriebnahme die komplette

Bedienungsanleitung sorgfältig

durchlesen und aufbewahren.

P ROEDITION

Ver. 20151202

Original instructions

Bruksanvisning i original

Original bruksanvisning

Alkuperäinen käyttöohje

Original Bedienungsanleitung

Art.no Model

31-8730 BLR01-R3-300

PRO GA36-B

GRASS TRIMMER 36 V

31-8730

GRÄSTRIMMER GRESSTRIMMER

RUOHOTRIMMERI RASENTRIMMER

ENGLISH

3

36 V Grass Trimmer

Art.no 31-8730 Model BLR01-R3-300

Please read theentire instruction manual before using theproduct and then save

it for future reference. We reserve theright for any errors in text or images and any

necessary changes made to technicaldata. In theevent of technical problems or other

queries, please contact our Customer Services (see address details on theback).

Table of contents

Safety .....................................................................4

General Safety Requirements – EN 60745-1 .............................. 4

Specic Safety Instructions for Grass Trimmers ........................ 7

Grass trimmer symbol explanation ............................................ 8

Buttons and functions .............................................9

Assembly instructions ...........................................11

Front handle .......................................................................... 11

Trimmer guard ........................................................................ 11

Plant guard ............................................................................ 11

Operating instructions ..........................................12

Charging the battery .............................................................. 12

Battery charge status indication ............................................. 12

Switching on .......................................................................... 13

Adjusting the trimmer head angle ........................................... 13

Edging .................................................................................... 13

Trimmer line ........................................................................... 14

Care and maintenance ........................................... 15

Troubleshooting guide ........................................... 15

Responsible disposal .............................................15

Specications .......................................................16

Grass trimmer ........................................................................ 16

Battery 36 V li-ion .................................................................. 16

Battery charger ...................................................................... 16

ENGLISH

4

Safety

General Safety Requirements – EN 60745-1

General safety instructions for power tools

Warning: Read all theinstructions. Failure to adhere to thefollowing instructions

may lead to electric shocks, ﬁres and/or serious injury.

SAVE THESE INSTRUCTIONS.

The term “power tools” in thewarning text below refers to your handheld mains

operated or battery operated tool.

1) Work area safety

a) Keep thework area clean and well illuminated. Cluttered and poorly lit areas

invite accidents.

b) Do not use power tools in explosive environments, such as in thepresence

of ﬂammable liquids, gases or dust. Power tools generate sparks that can easily

ignite dust or fumes.

c) Keep children and other bystanders away from thearea where you are using

thepower tool. Distractions can cause you to lose concentration and control of

thetool.

2) Electrical safety

a) The power tool plug must ﬁt correctly into thewall socket. Never modify

theplug in any way. Never use anadaptor together with earthed power tools.

Unmodiﬁed plugs and suitable wall sockets minimize therisk of electric shocks.

b) Avoid physical contact with earthed objects such as pipes, radiators, ovens

and refrigerators. There is anincreased risk of receiving anelectrical shock if your

body is earthed.

c) Do not expose thepower tool to rain or other wet conditions. Water entering

apower tool will increase therisk of electric shock.

d) Do not abuse themains lead. Never use thelead to carry thetool or pull

theplug from awall socket. Keep thelead away from heat, oil, sharp edges

and moving parts. Damaged or tangled leads increase therisk of electric shock.

e) When using power tools outdoors, use anextension lead that is suitable for

this purpose. The use of anextension lead designed for outdoor use decreases

therisk of electric shocks.

f) If theuse of thepower tool in awet environment is unavoidable, awall

socket equipped with aresidual current device (RCD) should be used.

Use of anRCD signiﬁcantly reduces therisk of electric shock.

ENGLISH

5

3) Personal safety

a) Pay attention to what you are doing and use common sense when using

power tools. Never use power tools if you are tired or under theinﬂuence of

drugs, alcohol or medication. One moment of inattention while using apower

tool may result in aserious injury.

b) Wear protective clothing. Always wear safety glasses. Using protective

clothing such as dust masks, non-slip safety shoes, helmets and ear defenders

decreases therisk of injury.

c) Avoid accidental starts. Make sure that thepower switch is set to OFF before

plugging thepower tool into awall socket, ﬁtting thebattery or picking up/

carrying thepower tool. Carrying apower tool with your ﬁnger on thepower

switch/trigger or connecting thepower tool to awall socket when thepower

switch is set to ON is inviting anaccident.

d) Remove all service tools/keys before switching on thepower tool. A service

tool left on arotating part of thepower tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance at all times. This ensures

better control over thepower tool in unexpected situations.

f) Wear suitable clothing. Do not wear loose-ﬁtting clothing or jewellery.

Keep hair, clothes and gloves away from moving parts. Loose-ﬁtting clothes,

jewellery or long hair could become caught in moving parts.

g) If equipment for dust extraction or collecting is available make sure it is

connected and used properly. Use of dust collection equipment can reduce

dust related hazards.

4) Use and maintenance of the power tool

a) Do not force thepower tool. Use apower tool suitable for thework you are

about to perform. The proper power tool will perform thetask better and safer if

used at thecorrect feed rate.

b) Never use thepower tool if thepower switch does not switch thetool on and

off properly. All power tools that cannot be controlled by thepower switch are

dangerous and must be repaired.

c) Unplug thelead from thewall socket or remove thebattery before making

any adjustments, changing accessories or storing thepower tool. These

precautions reduce therisk of thepower tool starting unexpectedly.

d) Store power tools that are not being used out of children’s reach. Do not

allow people who are unfamiliar with thetool or these instructions to operate

thetool. Power tools can be dangerous if they fall into thehands of inexperienced

users.

e) Maintain power tools. Check for any incorrect settings, parts that catch, broken

parts or anything else which may cause thepower tool to malfunction.

If something is damaged it must be repaired before use. Many accidents

are caused by poorly maintained power tools.

ENGLISH

6

f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp

blades are less likely to bind and are easier to control.

g) Use thepower tool, and any accessories in accordance with these

instructions, take into consideration theworking conditions and thework

that is to be performed. Using thepower tool for apurpose other than that for

which it is intended could result in adangerous situation.

5) The use and maintenance of cordless power tools

a) Only charge thebattery using acharger recommended by themanufacturer.

A charger suitable for one type of battery pack can pose aﬁre hazard if used for

another type of battery pack.

b) Only use thecordless power tool with specially designated battery packs.

Use of other battery packs may create arisk of injury and ﬁre.

c) When thebattery pack is not in use, keep it away from other metal objects

like paper clips, coins, keys, nails, screws or other small objects that can

make aconnection from one terminal to another. Shorting thebattery terminals

together may cause burns or aﬁre.

d) Under extreme conditions or if thebattery is mistreated, electrolyte may leak

from thebattery pack. Avoid contact with this liquid. If contact accidentally

occurs, rinse your skin with water. If theelectrolyte contacts your eyes, seek

medical help. Electrolyte which has leaked from thebattery pack can cause

irritation or burns.

6) Service

a) Repairs and service should only be performed by qualiﬁed tradesmen, and

only with original spare parts. This guarantees that thesafety of thepower tool

is maintained.

ENGLISH

7

Specic Safety Instructions for Grass Trimmers

• Never allow children or persons with reduced physical, sensory or mental capabilities

or lack of experience and knowledge or people unfamiliar with these instructions to

use the machine. Local regulations may restrict the age of the operator.

• Never let children operate or play with thegrass trimmer. Keep it out of reach of children.

• Wear sturdy footwear, long trousers, safety glasses and gloves.

• Keep anyone standing close by at asafe distance from thegrass trimmer.

• Keep children and pets out of thework area. Stones and other debris can be

ejected by thegrass trimmer. Switch thegrass trimmer off immediately should any

onlookers, adults, children or pets, come within 5 metres.

• Only use thegrass trimmer in good light conditions.

• If thegrass trimmer has been subjected to any shocks or impacts it must be

checked for damage. Any defect or damage must be repaired before thegrass

trimmer is used. Make sure thetrimmer head is securely fastened on. If it is loose

or damaged thegrass trimmer must not be used.

• Always inspect thegrass trimmer before use.

• The safety guard must always be ﬁtted before thegrass trimmer is used. The grass

trimmer must not be used if thesafety guard is damaged or missing.

• Before starting to use thegrass trimmer, check thearea to be trimmed for foreign

objects such as stones or cables.

• Always hold thegrass trimmer ﬁrmly. Hold it in both hands.

• Never attach metal cutting lines to this grass trimmer.

• Keep theventilation openings of thetrimmer head free from debris. Remove any

grass or leaves.

• The line will continue to rotate after themotor has been turned off. Wait until

theline has completely stopped before servicing.

• The grass trimmer must not be exposed to rain or moisture.

• Make sure that you are familiar with all thecontrols and settings before using

thegrass trimmer.

• Keep hands and feet away from thetrimmer head and line at all times and especially

when switching themotor on.

• Be careful when adjusting thetrimmer line; do not switch themotor on until you

are holding thegrass trimmer in thecorrect way.

• Only use thegrass trimmer with parts and accessories recommended by themanufacturer.

• Always remove thebattery before inspecting, cleaning or adjusting thegrass trimmer

and when it is not in use.

• Keep proper footing and balance at all times.

• Avoid directing thetrimmer head towards immovable objects when thetrimmer

head is spinning, as they could damage thegrass trimmer.

• Do not attempt to stop thetrimmer head with hands or feet, let it stop by itself.

• Avoid operating thegrass trimmer on gravel paths, gravel covered yards or other

places where stones could be ejected.

ENGLISH

8

Grass trimmer symbol explanation

WARNING! Grass trimmers can be dangerous.

Read theinstruction manual.

Do not expose thegrass trimmer to rain or moisture.

Wear eye protection.

Keep all persons and animals at asafe distance from

thegrass trimmer.

ENGLISH

9

1 2 3 4

5

6

7

8

9

10

11

12

13

14

Buttons and functions

ENGLISH

10

15 16 17 18 19 20

1. Trigger safety lock button

2. Power trigger

3. Battery connection

4. Storage space for trimmer spool andline

5. Locking knob for adjusting thelength of thetelescopicshaft

6. Front handle

7. Auxiliary handlelock

8. Edging wheel bracket

9. Plant guard

10. Motor housing ventilationslots

11. Catch for rotating thetrimmer head 90°

12. Catch for adjusting thetrimmer headangle

13. Trimmerguard

14. Trimmer linehead

15. Charger

16. Charging indicator

17. Full charge indicator

18. Battery

19. Battery release buttons

20. Battery charge status indicator

ENGLISH

11

Assembly instructions

Note: Remove thebattery from thegrass trimmer if one is ﬁtted.

Front handle

1. Slide thefront handle onto thebracket

until it clicks intoplace. Oncethehandle

has been ﬁtted to thebracket it can’t be

removedagain.

2. Undo thelocking knob (7) and adjust

thehandle to thedesired position.

Trimmer guard

1. Slide thetrimmer guard intoplace.

2. Secure thetrimmer guard using theincluded

screws.

Plant guard

Theplant guard is attached to prevent damage to plants and fragile objects.

Stick theends of theplant guard into theholes (9) on eachside. Theplant guard has

two positions. Extended for trimming and folded up for when thetrimmer is not inuse.

ENGLISH

12

Operating instructions

Charging the battery

Temperature range for charging and storing thebattery: 0–40ºC.

1. Press in thebuttons (19) on thebattery and remove it from thegrass trimmer.

2. Plug thecharger into awall socket (230 V, 50 Hz). Thecharging indicator (17) will

ﬂash green when thecharger is connected to themains.

4. Thecharging indicator (16) shines red when charging is in progress.

5. Thecharging indicator (16) goes out and thefull charge indicator (17) shines green

when thebattery is fully charged.

6. Press in thebuttons on thebattery and remove it from thecharger when it is fully

charged.

7. Unplug thecharger from thewall socket when it is not inuse.

Battery charge status indication

Press in thered button on thebattery to check thecharge status. Ifall thegreen lights

come on thebattery is fully charged. Ifonly one green light comes on thebattery is

discharged and needs to be charged before it isused.

Note:

• Thelithium-ion battery has abuilt-in electronic deep discharge protection which

prevents partial power from being delivered. Fullpower is provided at all times

until theelectronic protection engages, turning off thetrimmer and signifying

that thebattery needs to be recharged. Thegrass trimmer will be switched off

automatically. Donot attempt to continue work after this point as doing so may

damage thebattery. Abattery recharge is now required before any work is resumed.

• Thebattery also has abuilt-in electronic overload protection. Ifthegrass trimmer

is worked too hard, theelectronics automatically cut thepower and thetoolstops.

Release thetrigger and wait afew seconds before switching thetrimmer onagain.

• Thelithium-ion battery has no memory which means that it can be charged at any

time regardless of batterylevel.

• Charge thebattery for at least 6 hours theﬁrst and second time it is charged.

• For long-term storage thebattery should be fully charged at least every 6 months.

3. Insert thebattery into thecharger,

making sure that it clicks securely

intoplace.

ENGLISH

13

Switching on

Before switching thetrimmer on, checkthat:

• thetrimmer and its battery are whole and undamaged.

• thesafety lock button (1) and power trigger (2) are easily depressed and that they

do not stick or function abnormally in anyway.

• both handles are clean and easily gripped.

1. Attach thebattery making sure that it clicks securely intoplace.

2. Hold both thesafety lock button and power trigger pressedin. Thegrass trimmer

will nowstart.

3. Release thepower trigger to switch thegrass trimmeroff.

Adjusting the trimmer

head angle

1. Thetrimmer head can be set to

4different positions.

2. Press in therelease catch (8) and turn

thetrimmer head to thedesiredangle.

Makesure that thetrimmer head

clicks into one of theﬁxed positions.

3. Press thebutton in again to turn

thetrimmer head back to its original

position.

Edging

Thetrimmer head can be rotated through

90 degrees for trimmingedges.

1. Slide theedge trimmer support wheel

intoplace.

2. Press in therelease catch (11)

turn thetrimmer head 90°, refer to

thearrow on thecatch, it shows

which way thehead should be turned.

Makesure that thetrimmer head

clicks into thenew position.

3. When you have ﬁnished edging: press

in therelease catch on thesupport

wheel and removeit. Pressin

thecatch and turn thetrimmer head

back to its original position.

ENGLISH

14

Trimmer line

Feeding out more line

If thetrimmer line breaks off during operation, it is simple to feed out moreline.

1. Switch thetrimmeron.

2. Bump thetrimmer head repeatedly on theground so that thebutton on theline

spool is pressedin.

3. Each time thebutton is depressed, 1–2cm trimmer line is fedout.

4. If too much trimmer line is fed out, theexcess is automatically cut off by theblade

built into thebladeguard.

Replacing the line spool

Note: Remove thebattery from thegrass trimmer if one is ﬁtted.

1. Press in thetabs on either side of

thetrimmer head cover and removeit.

2. Remove theold linespool.

Note: Becareful not to lose thespring

located under thelinespool.

3. Replace thespool with anewone.

4. Theends of thetrimmer line are

fastened to thespool.

5. Unfasten theends of thetrimmer

line from thespool and pass them

through theslots in thetrimmerhead.

6. Reﬁt thecover back onto thetrimmer

head and make sure that it locks

securely intoplace.

7. Note: Wearsafety glasses and make

sure that there are no bystanders

nearby when starting thegrass

trimmer after new line has been ﬁtted

because any excess cut off line will ﬂy

out at highspeed.

ENGLISH

15

Care and maintenance

• Check regularly to ensure that no grass and twigs have built up around

thetrimmerhead.

• Check before every use, that thepower trigger and trigger safety lock button are

intact and work properly.

• Clean theexterior of thetrimmer with asoft brush or cloth, do not use water,

solvents or polish.

• Make sure that theventilation slots (10) on themotor housing are clean and free

from contaminants.

• Thegrass trimmer should be stored in adry place out of thereach of children.

• Thebattery should be stored in anambient temperature of 0–40 °C.

• For long-term storage thebattery should be fully charged at least every 6 months.

Troubleshooting guide

Thegrass trimmer

will notstart.

• Thebattery is discharged.

• Make sure that you have fully depressed both thesafety

lock and power trigger.

Poor battery

operatingtime.

• Thebattery is not fully charged.

• Thebattery needs replacing.

Thebattery does

not charge.

• Themains lead is not securely plugged into thewall socket.

• Check to see if there is power at thewall socket.

• Thebattery is not correctly inserted into thecharger.

• Thebattery or charger contacts aredirty.

• Note: Unplug thecharger from thewall socket before

cleaning thecontacts.

• Thecharger or its cable is damaged.

• Thebattery is defective and must be replaced.

Responsible disposal

This symbol indicates that this product should not be disposed of

with general householdwaste. Thisapplies throughout theentire EU.

Inorder to prevent any harm to theenvironment or health hazards

caused by incorrect waste disposal, theproduct must be handed in

for recycling so that thematerial can be disposed of in aresponsible

manner. Whenrecycling your product, take it to your local collection

facility or contact theplace of purchase. Theywill ensure that

theproduct is disposed of in anenvironmentally sound manner.

ENGLISH

16

Specications

Grass trimmer

Battery 36V/2.5 Ah lithium-ion battery

No-loadspeed 7200rpm

Cutting diameter 300mm

Line diameter 1.6mm

Noise level LpA 80dB(A), K: 3dB

LwA 96dB(A), K: 3dB

Vibration 1.61m/s², K: 1.5m/s²

Weight (incl. battery) 3.4kg

Battery 36 V li-ion

Capacity 2.5 Ah

Chargingtime 1hour

Battery charger

Power supply 230V AC, 50/60Hz

Output voltage 36V DC

Output current 3.6A

SVENSKA

17

Grästrimmer 36 V

Art.nr 31-8730 Modell BLR01-R3-300

Läs igenom hela bruksanvisningen före användning och spara den sedan för fram-

tidabruk. Vireserverar oss förev. text- och bildfel samt ändringar av tekniskadata.

Vidtekniska problem eller andra frågor, kontakta vår kundtjänst (se adressuppgifter

påbaksidan).

Innehållsförteckning

Säkerhet ...............................................................18

Generella säkerhetsföreskrifter – EN 60745–1 ........................ 18

Särskilda säkerhetsföreskrifter för grästrimmer ..................... 21

Förklaring av symbolerna på grästrimmern .............................. 22

Knappar och funktioner ........................................23

Montering .............................................................25

Främre handtag ...................................................................... 25

Skyddskåpa ........................................................................... 25

Plantskydd ............................................................................. 25

Användning ...........................................................26

Laddning av batteri ................................................................ 26

Indikering av batteristatus ..................................................... 26

Start ...................................................................................... 27

Vinkla trimmerhuvudet ........................................................... 27

Kantrimmning ........................................................................ 27

Trimmertråd ........................................................................... 28

Skötsel och underhåll ............................................29

Felsökningsschema ...............................................29

Avfallshantering .................................................... 29

Specikationer ......................................................30

Grästrimmer ........................................................................... 30

Batteri 36 V li-jon ................................................................... 30

Batteriladdare ........................................................................ 30

SVENSKA

18

Säkerhet

Generella säkerhetsföreskrifter – EN 60745–1

Generella säkerhetsinstruktioner för elektriska handverktyg

Varning! Läsalla instruktioner. Omnedanstående instruktioner inte följs kan detta

leda till elektrisk stöt, brand eller allvarligskada.

SPARA DESSA INSTRUKTIONER.

Termen ”elektriskt handverktyg” ivarningstexten nedan refererar till ditt nätanslutna

eller batteridrivna handverktyg.

1) Arbetsutrymmet

a) Håll arbetsutrymmet rent och väl upplyst. Belamrade och mörka utrymmen

inbjuder till olyckor.

b) Använd inte elektriska handverktyg iexplosiva miljöer, som inärheten av lätt-

antändliga vätskor, gaser ellerdamm. Elektriska handverktyg genererar gnistor

som kan antända damm ellerångor.

c) Håll undan barn och åskådare medan du använder det elektriska handverktyget.

Störningsmoment kan göra att du tappar kontrollen över verktyget.

2) Elektrisk säkerhet

a) Det elektriska handverktygets stickpropp måste passa ivägguttaget. Modiﬁera

aldrig stickproppen på någotvis. Användaldrig adapter tillsammans med jordade

elektriska handverktyg. Omodiﬁerade stickproppar och passande vägguttag

minskar risken för elektriskstöt.

b) Undvik kroppskontakt med jordade föremål,t.ex. rör, element, köksspis och

kylskåp. Detinnebär ökad risk för elektrisk stöt om din kropp är jordad.

c) Utsätt inte det elektriska handverktyget för regn eller våta förhållanden.

Omvatten tränger in iettelektriskt handverktyg ökar det risken för elektriskstöt.

d) Misshandla inte nätsladden. Användaldrig nätsladden för att bära, dra eller

rycka stickproppen ur vägguttaget. Hållundan nätsladden från värme, olja,

vassa kanter och rörligadelar. Skadade eller trassliga nätsladdar ökar risken för

elektriskstöt.

e) När du använder ettelektriskt handverktyg utomhus, använd enskarvsladd

anpassad för detta ändamål. Användning av enskarvsladd för utomhusbruk

minskar risken för elektriskstöt.

f) Om det inte går att undvika att det elektriska handverktyget används ifuktig

miljö, använd ettvägguttag utrustat med jordfelsbrytare. Användning av jord-

felsbrytare minskar risken för elektriskstöt.

SVENSKA

19

3) Personlig säkerhet

a) Var uppmärksam på vad du gör och bruka sunt förnuft när du använder

ettelektriskt handverktyg. Användinte ettelektriskt handverktyg om du

är trött eller påverkad av droger, alkohol eller medicinering. Ettögonblicks

ouppmärksamhet när du använder ettelektriskt handverktyg kan resultera iallvarlig

personskada.

b) Använd skyddsutrustning. Bäralltid skyddsglasögon. Attvid behov använda

skyddsutrustning,t.ex. andningsskydd, halksäkra skyddsskor, hjälm och hörsel-

skydd, minskar risken för personskada.

c) Undvik oavsiktligstart. Setill att strömbrytaren är iläge OFF innan du ansluter

stickproppen till vägguttaget, ansluter batteriet eller lyfter upp/bär det

elektriska handverktyget. Attbära ettelektriskt handverktyg med ettﬁnger på

strömbrytaren/avtryckaren eller att ansluta ettelektriskt handverktyg till elnätet när

strömbrytaren är iläge ON inbjuder till olyckor.

d) Ta bort alla serviceverktyg/nycklar innan du slår på det elektriska handverktyget.

Ettkvarglömt serviceverktyg på enroterande del av det elektriska handverktyget

kan resultera ipersonskada.

e) Sträck dig inte förlångt. Setill att du står stadigt med god balans helatiden.

Dettamöjliggör bättre kontroll över det elektriska handverktyget ioväntade situationer.

f) Bär lämplig klädsel. Bärinte löst sittande kläder eller smycken. Hållundan

hår, kläder och handskar från rörligadelar. Lösakläder, smycken och långt hår

kan fastna irörligadelar.

g) Om utrustning för utsugning och uppsamling av damm ﬁnns tillgänglig, se till

att denna är ansluten och används på ettkorrektsätt. Användning av dessa

hjälpmedel kan minska dammrelateradefaror.

4) Användning och underhåll av det elektriska handverktyget

a) Pressa inte det elektriska handverktyget. Användettelektriskt handverktyg

som är avsett för det arbetsmoment duutför. Korrekt elektriskt handverktyg gör

jobbet bättre och säkrare med avsedd matningshastighet.

b) Använd inte det elektriska handverktyget om strömbrytaren inte slår på och

stänger av verktyget. Allaelektriska handverktyg som inte kan kontrolleras med

strömbrytaren är farliga och måste repareras.

c) Ta stickproppen ur vägguttaget eller ta ur batteriet innan du utför några

justeringar, byter tillbehör eller lägger undan det elektriska handverktyget för

förvaring. Dessaförebyggande skyddsåtgärder minskar risken för att starta det

elektriska handverktyget oavsiktligt.

d) Förvara elektriska handverktyg som inte används utom räckhåll för barn och

låt inte personer som inte är förtrogna med det elektriska handverktyget eller

dessa instruktioner användadet. Elektriska handverktyg är farliga om de kommer

ihänderna på ovana användare.

SVENSKA

20

e) Underhåll elektriska handverktyg. Kontrollera om något är felinställt, om

rörliga delar kärvar, om delar har gått sönder eller om något annat har inträffat

som kan påverka funktionen hos det elektriska handverktyget. Omnågot är

skadat måste det repareras före användning. Mångaolyckor beror på dåligt

underhållna elektriska handverktyg.

f) Håll skärverktyg vassa ochrena. Ordentligt underhållna skärverktyg med vassa

eggar är mindre benägna att kärva och lättare att kontrollera.

g) Använd det elektriska handverktyget, tillbehöretc. enligt dessa instruktioner,

ta hänsyn till arbetsförhållanden och till det arbete som ska utföras. Använd-

ning av det elektriska handverktyget för andra arbeten än vad det är ämnat för kan

resultera ienfarlig situation.

5) Användning och skötsel av sladdlösa elektriska handverktyg

a) Ladda endast med enav tillverkaren speciﬁcerad laddare. Enladdare som är

avsedd för entyp av batteripack kan skapa brandfara om den används till enannan

typ av batteripack.

b) Använd endast sladdlösa elektriska handverktyg med batteripack som är

speciellt anpassade. Användning av andra batteripack kan skapa risk för skada

ochbrand.

c) När inte batteripacket används ska det hållas undan från metallföremål

som gem, mynt, nycklar, spikar, skruvar och andra metallföremål som kan

kortsluta batteripackets kontakter. Kortslutning av batteriets poler kan medföra

brännskada ellerbrand.

d) Om batteripacket misshandlas kan vätska läcka ut från batteripacket; undvik

kontakt med vätskan. Omdu trots allt kommer ikontakt med den, spola med

vatten. Omvätskan kommer ikontakt med ögonen, sök medicinskhjälp.

Vätskasom har läckt ut från batteripacket kan orsaka irritation eller brännskada.

6) Service

a) Låt behörig personal utföra service och reparationer, och endast med original-

reservdelar. Dettagaranterar att säkerheten hos det elektriska handverktyget behålls.

Page is loading ...

Cocraft BLR01-R3-300 Original Instructions Manual

Cocraft BLR01-R3-300 Original Instructions Manual

in other languages

Other documents