Pioneer Super Tuner IIID DVH-P5000MP User manual

Operation Manual

Manual de instrucciones

Multi-CD/DAB control High power DVD/VCD/CD/MP3

player with RDS tuner

Reproductor de DVD/VCD/CD/MP3 de alta potencia

con sintonizador RDS y control de CD múltiple/DAB

DVH-P5000MP

English Español

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate

your model properly. After you have finished reading the instructions, put them away

in a safe place for future reference.

Be sure to read this

! Playable discs 6

! DVD video disc region numbers 6

! When an operation is prohibited 9

Precautions

To ensure safe driving 5

Before You Start

About this unit 6

About this manual 6

Precautions 7

In case of trouble 7

Features 7

Condition memory 8

What the marks on DVDs indicate 8

Use and care of the remote control 9

Whats What

Head unit 10

Remote control 11

Basic Operations

Switching the remote control operation mode

switch 13

Turning the unit on 13

Selecting a source 13

Loading a disc 14

Adjusting the volume 14

Turning the unit off 14

Protecting your unit from theft 15

Tuner

Listening to the radio 16

Introduction of advanced tuner

operation 17

Storing and recalling broadcast

frequencies 17

Tuning in strong signals 17

Storing the strongest broadcast

frequencies 18

RDS

Introduction of RDS operation 19

Switching the RDS display 19

Selecting alternative frequencies 20

Receiving traffic announcements 21

Using PTY functions 21

Using radio text 22

PTY list 24

Playing DVD video discs

Watching a DVD video 25

Basic operation of DVD video 25

Specifying title 26

Specifying chapter 26

Frame-by-frame playback 26

Pausing DVD video playback 26

Slow motion playback 27

Changing audio language during playback

(Multi-audio) 27

Changing the subtitle language during

playback (Multi-subtitle) 27

Changing the viewing angle during playback

(Multi-angle) 28

Operating from the information displays 29

Operating from the function display 31

Playing Video CDs

Watching a Video CD 33

Basic operation of Video CD 33

Specifying track 34

Pausing Video CD playback 34

Slow motion playback 34

Operating from the information display 35

Contents

En

2

Operating from the function display 36

Playing CDs

Listening a CD 38

Basic operation of CD 38

Operating from the information display 39

Operating from the function display 41

Playing MP3

Listening MP3 44

Basic operation of MP3 44

Operating from the information display 45

Operating from the function display 47

Multi-CD Player

Playing a CD 50

50-disc multi-CD player 50

Introduction of advanced multi-CD player

operation 51

Repeating play 51

Playing tracks in a random order 51

Scanning CDs and tracks 52

Pausing CD playback 52

Using ITS playlists 52

Using disc title functions 54

Using CD TEXT functions 55

Using compression and bass emphasis 55

Audio Adjustments

Introduction of audio adjustments 56

Compensating for equalizer curves (EQ-

EX) 57

Setting the sound focus equalizer

(SFEQ) 57

Using balance adjustment 57

Using the equalizer 58

Adjusting bass and treble 59

Adjusting loudness 60

Using subwoofer output 60

Using non fading output 61

Using the high pass filter 61

Adjusting source levels 62

Digital Signal Processor

Introduction of DSP adjustments 63

Using the sound field control 64

Using the position selector 64

Using balance adjustment 65

Adjusting source levels 65

Using the dynamic range control 65

Using the dual mono mode 66

Using the direct control 66

Using the Dolby Pro Logic 66

Setting the speaker setting 67

Selecting a cut-off frequency 68

Adjusting the speaker output levels 68

Adjusting the speaker output levels using a

test tone 68

Adjusting the time alignment 69

Using the equalizer 70

Setting up the DVD player

Introduction of DVD setup adjustments 72

Returning to the previous display 72

Setting the subtitle language 72

Setting the audio language 73

Setting the menu language 73

Setting assist subtitles on or off 74

Setting angle icon display 74

Setting the aspect ratio 74

Setting the parental lock 75

Setting remote control code type 76

Initial Settings

Adjusting initial settings 77

Setting the FM tuning step 77

Switching Auto PI Seek 77

Switching the warning tone 77

En

3

English

Contents

Switching the auxiliary setting 78

Switching the dimmer setting 78

Setting the rear output and subwoofer

controller 78

Switching the telephone muting/

attenuation 79

Switching the automatic disc playback 79

Correcting distorted sound 79

Other Functions

Setting the level indicator 80

Using the AUX source 80

Introduction of DAB operation 81

Introduction of DVD operation 83

Additional Information

Troubleshooting 84

Error messages 86

DVD player and care 87

DVD discs 87

CD-R/CD-RW discs 87

MP3 files 88

About folders and MP3 files 89

Language code chart for DVD 90

Terms 91

Specifications 94

Contents

En

4

To ensure safe driving

WARNING

! To avoid the risk of accident and the potential

violation of applicable laws, this unit is not for

use with a video screen that is visible to the

driver.

! In some countries or states the viewing of

images on a display inside a vehicle even by

persons other than the driver may be illegal.

Where such regulations apply, they must be

obeyed.

This unit detects whether your cars parking

brake is engaged or not, and prevents you

from watching a DVD or Video CD on the dis-

play connected to FRONT VIDEO OUTPUT

while driving. When you attempt to watch a

DVD/Video CD, the screen will turn black.

When you park your car in a safe place and

apply the parking brake, the picture appears

on the screen.

When using a display connected

to DVD REAR MONITOR OUTPUT

This units DVD REAR MONITOR OUTPUT is

for connection of a display to enable passen-

gers in the rear seats to watch the DVD or

Video CD.

WARNING

NEVER install the display in a location that en-

ables the driver to watch the DVD or Video CD

while driving.

Precautions

En

5

English

Section

01

About this unit

This product complies with the EMC Directives

(89/336/EEC, 92/31/EEC) and CE Marking Di-

rective (93/68/EEC).

! The tuner frequencies on this unit are allo-

cated for use in Western Europe, Asia, the

Middle East, Africa and Oceania. Use in

other areas may result in improper recep-

tion. The RDS function operates only in

areas with FM stations broadcasting RDS

signals.

Playable discs

DVD, Video CD and CD discs that display the

logos shown below can be played back on this

player.

DVD video

Video CD

CD

Note

It is not possible to play back DVD audio disc.

This player can only playback discs bearing the

marks shown above.

DVD video disc region numbers

DVD video discs that have incompatible region

numbers cannot be played on this player. The

region number of the player can be found on

the bottom of this unit.

The illustration below shows the regions and

corresponding region numbers.

About this manual

This unit features a number of sophisticated

functions ensuring superior reception and op-

eration. All the functions have been designed

for the easiest possible use, but many are not

self-explanatory. This operation manual will

help you benefit fully from this productspo-

tential and to maximize your listening enjoy-

ment.

We recommend that you familiarize yourself

with the functions and their operation by read-

ing through the manual before you begin

using this unit. It is especially important that

you read and observe precautions on the next

page and in other sections.

This manual mainly explains remote control

operation. However, in addition to those func-

tions related with DVD/Video CD/CD/MP3 op-

eration that can only be operated by the

remote control, there are also functions that

can be operated similarly by the head unit and

functions that can only be operated by the but-

tons provided for the head unit.

Before You Start

En

6

Section

02

Precautions

! This product contains a laser diode of high-

er class than 1. To ensure continued safety,

do not remove any covers or attempt to

gain access to the inside of the product.

Refer all servicing to qualified personnel.

The following caution label appears on

your unit.

Location:

On the bottom of the unit

CLASS 1

LASER PRODUCT

On the top of the unit

CAUTION :

VORSICHT :

ADVARSEL :

VARNING :

VARO! :

VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.

AVOID EXPOSURE TO BEAM.

SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG, WENN

ABDECKUNG GE…FFNET NICHT DEM STRAHL AUSSETZEN!

SYNLIG OG USYNLIG LASERSTR LING VED BNING UNDG

UDS®TTELSE FOR STRËLING.

SYNLIG OCH OSYNLIG LASERSTR LNING N R DENNA DEL R

…PPNAD BETRAKTA EJ STR LEN.

AVATTAESSA ALTISTUT N KYV JA N KYM TT…M LLE

LASERSATEIL YLLE. L KATSO S TEESEN.

VRW1860

! The Pioneer CarStereo-Pass is for use only

in Germany.

! Keep this manual handy as a reference for

operating procedures and precautions.

! Always keep the volume low enough so you

can hear sounds outside of the car.

! Protect this product from moisture.

! If the battery is disconnected or dis-

charged, the preset memory will be erased

and must be reprogrammed.

In case of trouble

Should this product fail to operate properly,

contact your dealer or nearest authorized Pio-

neer Service Station.

Features

DVD video playback

It is possible to play back DVD video, DVD-R

(video mode) and DVD-RW (video mode).

Video CDs featuring PBC compatibility

It is possible to play back Video CDs featuring

PBC (playback control).

CD playback

Music CD/CD-R/CD-RW playback is possible.

MP3 file playback

It is possible to play back MP3 files recorded

on CD-ROM/CD-R/CD-RW (ISO9660 Level 1/

Level 2 standard recordings).

! Supply of this product only conveys a li-

cense for private, non-commercial use and

does not convey a license nor imply any

right to use this product in any commercial

(i.e. revenue-generating) real time broad-

casting (terrestrial, satellite, cable and/or

any other media), broadcasting/streaming

via internet, intranets and/or other net-

works or in other electronic content distri-

bution systems, such as pay-audio or

audio-on-demand applications. An inde-

pendent license for such use is required.

For details, please visit

http://www.mp3licensing.com.

NTSC/PAL compatibility

This unit is NTSC/PAL system compatible.

When connecting other components to this

unit, be sure components are compatible with

the same video system or else images will not

be correctly reproduced.

Dolby Digital/DTS compatibility

When using this unit with a Pioneer multi-

channel processor, you can enjoy the atmo-

sphere and excitement provided by DVD movie

and music software featuring 5.1channel re-

cordings.

Before You Start

En

7

English

Section

02

! Manufactured under license from Dolby La-

boratories. Dolby and the double-D sym-

bol are trademarks of Dolby Laboratories.

! DTS is a registered trademark of Digital

Theater Systems, Inc.

Multi-aspect

Switching between wide screen, letter box and

panscan display is possible.

Multi-audio

You can switch between multiple audio sys-

tems recorded on a DVD as desired.

Multi-subtitle

You can switch between multiple subtitle lan-

guages recorded on a DVD as desired.

Multi-angle

You can switch between multiple viewing an-

gles of a scene recorded on a DVD as desired.

Note

This product incorporates copyright protection

technology that is protected by method claims of

certain U.S. patents and other intellectual prop-

erty rights owned by Macrovision Corporation

and other rights owners. Use of this copyright

protection technology must be authorized by

Macrovision Corporation, and is intended for

home and other limited viewing uses only unless

otherwise authorized by Macrovision Corporation.

Reverse engineering or disassembly is

prohibited.

Condition memory

This function memorizes audio language, sub-

title language, angle number, audio output (L,

R) and aspect ratio made during disc playback

for up to 30 discs. Without any special opera-

tions, the final setting details during playback

of a disc are memorized. The next time a disc

is played, the previous settings are automati-

cally applied.

! With some discs, audio language and sub-

title language are automatically specified,

in which case condition memory does not

function.

! When the number of discs exceeds 30, set-

tings for the latest disc replace those for

the least recent disc.

What the marks on DVDs

indicate

The marks below may be found on DVD disc

labels and packages. They indicate the type of

images and audio recorded on the disc, and

the functions you can use.

Mark Meaning

2

Indicates the number of audio sys-

tems.

2

Indicates the number of subtitle lan-

guages.

3

Indicates the number of viewing an-

gles.

16 : 9 LB

Indicates the picture size (aspect

ratio: screen width-to-height ratio)

type.

2

ALL

Indicates the number of the region

where playback is possible.

Before You Start

En

8

Section

02

When an operation is prohibited

When you are watching a DVD and attempt to

perform an operation, it may not be performed

by the programming on the disc. When this

happens, this unit indicates the icon

on the

screen.

! The icon

may not appear in certain dis-

cs.

Use and care of the remote

control

Installing the battery

Slide the tray out on the back of the remote

control and insert the battery with the plus (+)

and minus ( ) poles pointing in the proper di-

rection.

! When using for the first time, pull out the

film protruding from the tray.

WARNING

Keep the battery out of the reach of children.

Should the battery be swallowed, immediately

consult a doctor.

CAUTION

! Use only one CR2025 (3 V) lithium battery.

! Remove the battery if the remote control is not

used for a month or longer.

! Do not recharge, disassemble, heat or dispose

of the battery in fire.

! Do not handle the battery with metallic tools.

! Do not store the battery with metallic materi-

als.

! In the event of battery leakage, wipe the re-

mote control completely clean and install a

new battery.

! When disposing of used batteries, please

comply with governmental regulations or en-

vironmental public institutions rules that

apply in your country/area.

! Always check carefully that you are loading

the battery with its plus (+) and minus ()

poles facing in the proper directions.

Using the remote control

Point the remote control in the direction of the

front panel to operate.

! The remote control may not function prop-

erly in direct sunlight.

Important

! Do not store the remote control in high tem-

peratures or direct sunlight.

! Do not let the remote control fall onto the

floor, where it may become jammed under the

brake or accelerator pedal.

Before You Start

En

9

English

Section

02

Head unit

1 TA button

This button is only available on the head

unit.

Press to turn traffic announcements func-

tion on or off.

2 VOLUME

When you press VOLUME, it extends out-

ward so that it becomes easier to turn. To re-

tract VOLUME, press it again. Rotate to

increase or decrease the volume.

3 A (audio) button

Press to select various sound quality con-

trols.

4 a/b/c/d buttons

When controlling sources

! These buttons can perform the same op-

eration as m/n/o/p/r/q but-

tons on the remote control. Press to do

manual seek tuning, fast forward, re-

verse, track search and folder select con-

trols.

When controlling functions

! These buttons can perform the same op-

eration as r/q/m/n buttons on

the remote control.

5 OPEN button

This button is only available on the head

unit.

Press to open the front panel.

6 BAND button

Press to select among three FM and MW/

LW bands and cancel the control mode of

functions.

7 EQ-EX button

This button is only available on the head

unit.

Press and hold to switch between EQ-EX

and SFEQ functions. Press to operate each

function.

8 F (function) button

Press to select functions.

9 16 buttons

These buttons can perform the same opera-

tion as NUMBER (16) buttons on the re-

mote control. Press for preset tuning and

disc number search when using a multi-CD/

DVD player.

a DISPLAY button

This button is only available on the head

unit.

Press to select different displays.

4

6

1

2

3

9

5

78ac b

Whats What

En

10

Section

03

b EQ button

This button is only available on the head

unit.

Press to select various equalizer curves.

c SOURCE button

This unit is turned on by selecting a source.

Press to cycle through all of the available

sources.

Remote control

1 Remote control selection switch

Switch to change the setting of the remote

control. For details, refer to Setting remote

control code type on page 76.

2 VOLUME button

Press to increase or decrease the volume.

3 TOP MENU button

Press to return to the top menu during DVD

playback.

4 MENU button

Press to display the DVD menu during DVD

playback.

5 RETURN button

Press to return to the previous display when

the SET-UP MENU is displayed.

6 AUDIO button

Press to change the audio language during

DVD playback.

1

2

e

f

g

h

i

j

k

l

m

d

c

b

a

9

8

7

6

5

4

3

n

o

Whats What

En

11

English

Section

03

7 DISP button

Press to change the information display

while the DVD player is playing as the

source.

8 SUBTITLE button

Press to change the subtitle language dur-

ing DVD playback.

9 ANGLE button

Press to change the viewing angle during

DVD playback.

a PLAY/PAUSE (f) button

Press to switch sequentially between play-

back and pause play.

b REVERSE (m) button

Press to perform fast reverse playback or

seek tuning while the tuner is playing as the

source.

c PREVIOUS (o)/F (function) button

When the remote control is set to DVD

mode, press to return to the previous track

(chapter). If the remote control is set to

DVH mode, the function menu appears on

the head unit display.

d NUMBER buttons

Press to directly select the desired track,

chapter, preset tuning and disc. 16 buttons

can operate the preset tuning for the tuner

or disc number search for the multi-CD

player.

e SOURCE button

This unit is turned on by selecting a source.

Press to cycle through all of the available

sources.

f Joystick

Move to select the setting. Click to set the

setting or select on or off.

g Remote control operation mode switch

Switch the operation mode between DVD

mode (only the DVD player can be operated

by the remote control) or DVH mode (all

sources of this unit can be operated by the

remote control). (Refer to the next page.)

h BAND button

Press to select among three FM and MW/

LW bands and cancel the control mode of

functions.

i REAR.S button

Press to watch a DVD/Video CD on a rear

display if DVD (built-in DVD player) is not

selected as the source.

j STEP (r/q) button

Press to move ahead one frame at a time

during DVD/VideoCD playback. Press and

hold for one second to activate slow play-

back.

k ATT button

Press to quickly lower the volume level, by

about 90%. Press once more to return to the

original volume level.

l FORWARD (n) button

Press to perform fast forward playback or

seek tuning while the tuner is playing as the

source.

m STOP (g) button

Press to stop playback.

n NEXT (p)/A (audio) button

When the remote control is set to DVD

mode, press to return to the previous track

(chapter). If the remote control is set to

DVH mode, the audio menu appears on the

head unit display.

o CLEAR button

Press to cancel the input number while

NUMBER are used.

Whats What

En

12

Section

03

Switching the remote control

operation mode switch

There are two remote control operation modes

on the remote control. If you want to operate

this unit by remote control, turn the mode

switch to DVH mode. In this case, both the

head units buttons and remote control can

control this unit.

If you want to operate the DVD playback on

the rear display, turn the mode switch to DVD

mode. In this case, the remote control can

control the DVD playback of the rear display

independently. (If both the front and rear dis-

plays are playing DVD as the source at the

same time, operation is the same for the front

and rear displays.)

If the rear display is connected to this unit and

the remote control operation mode is set to

DVD mode, the rear display can playback DVD

even though the source which is selected by

the head unit is not DVD.

Note

If the remote control operation mode is set to

DVD mode, only the DVD player can be operated

by the remote control.

Turning the unit on

% Press SOURCE to turn the unit on.

When you select a source the unit is turned

on.

When the DVD player is

operated from rear seats

% Press REAR.S to turn the DVD playback

on.

Notes

! Even if the source selected with this unit is

not DVD, if you switch power to this unit on

with REAR.S, you can watch the DVD picture

from this unit on the rear display.

! Regardless of whether this unit is switched on

or off, you can watch the DVD video on the

rear display.

Selecting a source

You can select a source you want to listen to. If

AUTO PLAY is turned on, load a disc in this

unit to switch to DVD (refer to Switching the

automatic disc playback on page 79).

% Press SOURCE to select a source.

Press SOURCE repeatedly to switch between

the following sources:

DAB (digital audio broadcasting)TUNER

(tuner)TV (television)DVD (built-in DVD

player)S-DVD (DVD player/multi-DVD

player)MULTI-CD (multi-CD player) EXT

(external unit 1)EXT (external unit 2)AUX

(AUX)

Notes

! In the following cases, the sound source will

not change:

 When a unit corresponding to each source

is not connected to this unit.

 When no disc is set in this unit.

 When no disc is set in the DVD player.

 When no magazine is set in the multi-CD

player.

 When no magazine is set in the multi-DVD

player.

 When the AUX (auxiliary input) is set to off

(refer to page 78).

Basic Operations

En

13

English

Section

04

! External unit refers to a Pioneer product (such

as one available in the future) that, although

incompatible as a source, enables control of

basic functions by this unit. Two external units

can be controlled by this unit. When two exter-

nal units are connected, the allocation of

them to external unit 1 or external unit 2 is

automatically set by this unit.

! When this units blue/white lead is connected

to the cars auto-antenna relay control term-

inal, the cars antenna extends when this

units source is turned on. To retract the an-

tenna, turn the source off. (When you con-

nected a Pioneer multi-channel processor

(DEQ-P7000) to this unit, auto-antenna cannot

be controled.)

Loading a disc

1 Press OPEN to open the front panel.

Disc loading slot appears.

# After a disc has been inserted, press SOURCE

to select the DVD player.

2 Insert a disc into the disc loading slot.

When you set A-PLY: ON, playback will auto-

matically start. If you set A-PLY: OFF, press

SOURCE to select DVD (refer to the previous

page).

Disc loading slot

EJECT button

# To eject a disc, press EJECT.

# To avoid a malfunction, make sure that no

metal object comes into contact with the term-

inals when the front panel is open.

3 Close the front panel.

Notes

! The DVD player plays one, standard, 12-cm or

8-cm (single) disc at a time. Do not use an

adapter when playing 8-cm discs.

! Do not insert anything other than a disc into

the disc loading slot. Discs which can be

played back are listed on Playable discs on

page 6.

! If you cannot insert a disc completely or if

after you insert a disc the disc does not play,

check that the label side of the disc is up.

Press EJECT to eject the disc, and check the

disc for damage before inserting the disc

again.

! If the DVD player does not operate properly,

an error message such as ERROR-02 may be

displayed. Refer to Error messages on page

86.

Adjusting the volume

% Use VOLUME to adjust the sound level.

With the head unit, rotate VOLUME to in-

crease or decrease the volume.

With the remote control, press VOLUME to in-

crease or decrease the volume.

Turning the unit off

% Press SOURCE and hold until the unit

turns off.

Basic Operations

En

14

Section

04

When the DVD player is

operated from rear seats

% Press REAR.S to turn the DVD playback

off.

REAR will disappear from the head units dis-

play.

Notes

! When you have turned the DVD playback on

by pressing REAR.S, you cannot turn this unit

off even if you press and hold SOURCE.(REAR

on the head units display lights.) In this case,

press REAR.S to turn REAR off. When REAR

has disappeared from the head units display,

you can confirm that this unit is off.

! If the DVD playback is set to off, REAR will dis-

appear from the head units display.

Protecting your unit from

theft

The front panel can be detached from the

head unit and stored in the protective case

provided to discourage theft.

! If the front panel is not detached from the

head unit within five seconds of turning off

the ignition, a warning tone will sound.

! You can turn off the warning tone. See

Switching the warning tone on page 77.

Important

! Never use force or grip the display and the

buttons tightly when removing or attaching.

! Avoid subjecting the front panel to excessive

shocks.

! Keep the front panel out of direct sunlight and

high temperatures.

Removing the front panel

1 Press OPEN to open the front panel.

2 Grip the left side of the front panel and

pull it gently outward.

Take care not to grip it tightly or to drop it.

3 Put the front panel into the protective

case provided for safe keeping.

Attaching the front panel

% Replace the front panel by holding it

upright to this unit and clipping it securely

into the mounting hooks.

Basic Operations

En

15

English

Section

04

Listening to the radio

1 2 4

3

These are the basic steps necessary to operate

the radio. More advanced tuner operation is

explained starting on the next page.

This units AF (alternative frequencies search)

function can be turned on and off. AF should

be off for normal tuning operation (refer to

page 20).

1 Band indicator

Shows which band the radio is tuned to,

MW, LW or FM.

2 Frequency indicator

Shows to which frequency the tuner is

tuned.

3 Stereo (5) indicator

Shows that the frequency selected is being

broadcast in stereo.

4 Preset number indicator

Shows what preset has been selected.

1 Press SOURCE to select the tuner.

Press SOURCE until you see TUNER dis-

played.

2 Press BAND to select a band.

Press BAND until the desired band is dis-

played, F1, F2, F3 for FM or MW/LW.

3 To perform manual tuning, press m or

n with quick presses.

The frequencies move up or down step by

step.

4 To perform seek tuning, press and hold

m or n for about one second and re-

lease.

The tuner will scan the frequencies until a

broadcast strong enough for good reception is

found.

# You can cancel seek tuning by pressing either

m or n with a quick press.

# If you press and hold m or n you can skip

broadcasting stations. Seek tuning starts as soon

as you release the buttons.

Note

When the frequency selected is being broadcast

in stereo the stereo (5) indicator will light.

Tuner

En

16

Section

05

Introduction of advanced

tuner operation

1

2

1 Function display

Shows the function status.

2 LOC indicator

Shows when local seek tuning is on.

% Press F to display the function names.

Press F repeatedly to switch between the fol-

lowing functions:

BSM (best stations memory)REG (regional)

LOCAL (local seek tuning)program type

selection (PTY)TA (traffic announcement

standby)AF (alternative frequencies search)

NEWS (news program interruption)

# To return to the frequency display, press

BAND.

# If MW/LW band is selected, you can only se-

lect BSM or LOCAL.

Note

If you do not operate the function within about 30

seconds, the display is automatically returned to

the frequency display.

Storing and recalling

broadcast frequencies

If you press any of the NUMBER (16) you can

easily store up to six broadcast frequencies for

later recall with the touch of a button.

% When you find a frequency that you

want to store in memory press a NUMBER

(16) and hold until the preset number

stops flashing.

The number you have pressed will flash in the

preset number indicator and then remain lit.

The selected radio station frequency has been

stored in memory.

The next time you press the same NUMBER

(16) the radio station frequency is recalled

from memory.

Notes

! Up to 18 FM stations, 6 for each of the three

FM bands, and 6 MW/LW stations can be

stored in memory.

! You can also use q and r to recall radio

station frequencies assigned to NUMBER

(16).

Tuning in strong signals

Local seek tuning lets you tune in only those

radio stations with sufficiently strong signals

for good reception.

1 Press F to select LOCAL.

Press F until LOCAL appears in the display.

2 Press r to turn local seek tuning on.

Local seek sensitivity (e.g., LOCAL 2) appears

in the display.

3 Press m or n to set the sensitivity.

There are four levels of sensitivity for FM and

two levels for MW/LW:

FM: LOCAL 1LOCAL 2LOCAL 3

LOCAL 4

MW/LW: LOCAL 1LOCAL 2

The LOCAL 4 setting allows reception of only

the strongest stations, while lower settings let

you receive progressively weaker stations.

Tuner

En

17

English

Section

05

4 When you want to return to normal

seek tuning, press q to turn local seek

tuning off.

LOCAL:OFF appears in the display.

Storing the strongest

broadcast frequencies

BSM (best stations memory) lets you automa-

tically store the six strongest broadcast fre-

quencies under NUMBER (16) and once

stored there you can tune in to those frequen-

cies with the touch of a button.

1 Press F to select BSM.

Press F until BSM appears in the display.

2 Press r to turn BSM on.

BSM begins to flash. While BSM is flashing

the six strongest broadcast frequencies will be

stored under NUMBER (16) in order of their

signal strength. When finished, BSM stops

flashing.

# To cancel the storage process, press q.

Note

Storing broadcast frequencies with BSM may re-

place broadcast frequencies you have saved

using NUMBER (16).

Tuner

En

18

Section

05

Introduction of RDS operation

1 42 3

RDS (radio data system) is a system for provid-

ing information along with FM broadcasts.

This inaudible information provides such fea-

tures as program service name, program type,

traffic announcement standby and automatic

tuning, intended to aid radio listeners in find-

ing and tuning in to a desired station.

1 TP (

) indicator

Shows when a TP station is tuned in.

2 TEXT indicator

Shows when the radio text is received.

3 News (

) indicator

Shows when the set news program is re-

ceived.

4 Program service name

Shows the name of broadcast program.

% Press F to display the function names.

Press F repeatedly to switch between the fol-

lowing functions:

BSM (best stations memory)REG (regional)

LOCAL (local seek tuning)program type

selection (PTY)TA (traffic announcement

standby)AF (alternative frequencies search)

NEWS (news program interruption)

# To return to the frequency display, press

BAND.

# If MW/LW band is selected, you can only se-

lect BSM or LOCAL.

Notes

! If you do not operate the function within about

30 seconds, the display is automatically re-

turned to the frequency display.

! RDS service may not be provided by all sta-

tions.

! RDS functions like AF and TA are only active

when your radio is tuned to an RDS station.

Switching the RDS display

When you tune in an RDS station its program

service name is displayed. If you want to know

the frequency you can.

% Press DISPLAY on the head unit.

Press DISPLAY on the head unit repeatedly to

switch between the following settings:

Program service name (A)PTY information

and frequencyProgram service name (B)

PTY (program type ID code) information is

listed on page 24.

# PTY information and the frequency of the cur-

rent station appears on the display for eight sec-

onds.

# If a PTY code of zero is received from a station

or the signal is too weak for this unit to pick up

the PTY code, you cannot switch to PTY infoma-

tion display. In this case, if you have selected the

PTY information display, the display will be chan-

ged blank.

# If the signal is too weak for this unit to pick up

the PTY code, the PTY information display is

blank.

RDS

En

19

English

Section

06

Selecting alternative

frequencies

If you are listening to a broadcast and the re-

ception becomes weak or there are other pro-

blems, the unit will automatically search for a

different station in the same network which is

broadcasting a stronger signal.

! AF is on as a default.

1 Press F to select AF.

Press F until AF appears in the display.

2 Press r to turn AF on.

AF :ON appears in the display.

3 Press q to turn AF off.

AF :OFF appears in the display.

Notes

! Only RDS stations are tuned in during seek

tuning or BSM when AF is on.

! When you recall a preset station, the tuner

may update the preset station with a new fre-

quency from the stations AF list. (This is only

available when using presets on the F1 or F2

bands.) No preset number appears on the dis-

play if the RDS data for the station received

differs from that for the originally stored sta-

tion.

! Sound may be temporarily interrupted by an-

other program during a AF frequency search.

! AF can be turned on or off independently for

each FM band.

Using PI Seek

If the unit fails to find a suitable alternative fre-

quency, or if you are listening to a broadcast

and the reception becomes weak, the unit will

automatically search for a different station

with the same programming. During the

search, PI SEEK is displayed and the output is

muted. The muting is discontinued after com-

pletion of the PI Seek, whether or not a differ-

ent station is found.

Using Auto PI Seek for preset

stations

When preset stations cannot be recalled, as

when travelling long distances, the unit can

be set to perform PI Seek during preset recall.

! The default setting for Auto PI Seek is off.

See Switching Auto PI Seek on page 77.

Limiting stations to regional

programming

When AF is used to automatically retune fre-

quencies, the regional function limits the se-

lection to stations broadcasting regional

programs.

1 Press F to select REG.

Press F until REG appears in the display.

2 Press r to turn the regional function

on.

REG :ON appears in the display.

3 Press q to turn the regional function

off.

REG :OFF appears in the display.

Notes

! Regional programming and regional networks

are organized differently depending on the

country (i.e., they may change according to

the hour, state or broadcast area).

! The preset number may disappear on the dis-

play if the tuner tunes in a regional station

which differs from the originally set station.

! The regional function can be turned on or off

independently for each FM band.

RDS

En

20

Section

06

Page is loading ...

Pioneer Super Tuner IIID DVH-P5000MP User manual

This manual is also suitable for

Pioneer Super Tuner IIID DVH-P5000MP User manual

in other languages

Related papers

Other documents