Whirlpool WME 3621 X AQUA Program Chart

Brand: Whirlpool

Model: WME 3621 X AQUA

Type: Program Chart

This manual is also suitable for

WME3611 X AQUA

1. Fan*

2. Electronic control panel / light unit

3. Bottle rack*

4. Sensor cover

5. Area shelves

6. Rating plate with commercial name

7. Fruits and vegetables crisper

8. Door reversibility kit

9. Water tank

10. Bottle holder*

11. Door trays

12. Door seal

* Available on selected models

HOW TO START THE APPLIANCE

After plugging the appliance to the mains, it starts the

operation automatically. After starting the appliance, wait

at least 4-6 hours before placing food into the appliance.

When the appliance is connected to the power supply,

the display lights up and all the icons appear on the

display for approximately 1 second. The default (factory)

values of the fridge compartment settings light-up.

HOW TO REVERSE THE DOOR SWING

- see enclosed Instructions for Use (Version_2)

Is recommended to reverse door swing by two persons.

There is not foreseen door reversibility for:

- models with integrated handle

- models with glass panel on the door.

Specifications, technical data and images may vary

from model to model

Read the Instructions for Use carefully before

using the appliance.

5019 320 00127

QUICK START GUIDE

ALARMS TABLE

ALARM TYPE Signal Cause Cure

Door open alarm Refrigerator Light blinks The door has remained open for more than 5 minutes. Close the door

Door open alarm Refrigerator Light OFF The door has remained open for more than 8 minutes. Close the door

Malfunction Any temperature indicators blinks Product malfunction. Contact the After-sales Service

ROBG

HUSKCZPLFIDKNOSEGRITPTESNLFRGBDE

Printed in Italy 05/14 - Whirlpool

SENSE

This function automatically works to ensure the optimal conditions to preserve the

stored food.

The “6th Sense” function is automatically activated when:

• a large amount of food is loaded into the refrigerator

• the refrigerator door is left open for a long time

• a prolonged power failure takes place, causing the internal temperature of the

appliance to increase to values that cannot guarantee safe storage of food.

FAN

The fan improves temperature distribution inside the refrigerator compartment,

allowing better preservation of stored food.

By default, the fan is switched on.

It is advisable to keep the fan switched on, so that the “6th Sense” function can work

properly and also when the ambient air temperature is above 27 - 28°C or if you

notice drops of water on the glass shelves or in sever humidity conditions.

To turn off the fan press the button of fan.

Please note that when the fan is switched on it will not continuously work. The fan

will start/stop working depending on the temperature and/or humidity level inside the

fridge.

It is therefore absolutely normal if the fan does not move even if the fan is switched

on.

on - o

TEMPERATURE button

Press the Temperature button on the control panel to adjust the temperature from the

warmest through the lower to the coldest level.

Pressing the Temperature button, the temperature setting will change cyclically.

At first plug-in of appliance temperature setpoint is present at medium position

(factory setting).

Following table shows temperature setpoints:

Note: Displayed set points correspond to the average temperature

throughout the whole refrigerator.

Led ON Led OFFLed ON Led OFF

high temp.

med-high temp.

medium temp.

med-low temp.

low temp.

REFRIGERATOR LIGHT

The light system inside the refrigerator compartment uses LEDs

light, allowing a better lightning as well as a very low energy

consumption.

If the LED light system does not work, please contact the

Service to replace it.

Important: The refrigerator compartment light switches on

when the refrigerator door is opened. If the door is kept open for

more then 8 minutes the light will be automatically switched off.

Indicator LEDs to display the current temperature

setpoint or the Fast Cooling function.

FAST COOLING function

The use of the Fast Cooling function is recommended:

- to increase the cooling speed of the refrigerator

compartment when placing a very high quantity of food

within it,

To activate the Fast Cooling function, press the

Temperature button cyclically on the control panel till all

the 3 LEDs blink and remain on.

Led ON Led OFFLed ON Led OFF

high temp.

med-high temp.

medium temp.

med-low temp.

low temp.

The function is automatically deactivated after 6 hours

and return to previous selected set point. The function can

be manually deactivated by press Temperature button on

the control panel.

TEMPERATURE button.

FAST COOLING button

Led ON Led OFFLed ON Led OFF

high temp.

med-high temp.

medium temp.

med-low temp.

low temp.

UTILISATION AND MAINTENANCE OF THE WATER DISPENSER AND FILTER

Water dispenser

First use

The first time you use the water dispenser or after a long period left not used wash the tank and the filter with water. The

water dispenser provides fresh, filtered water, without the need of opening the refrigerator door. This will reduce the number

of times the door is opened, thus also reducing energy consumption of the product.

Fitting and replacing the active carbon filter

The water filter should be removed from the foil bag (found in the crisper drawer (item 7). Follow the instructions provided

with the filter.

Important: If the filter is left dry for an extended period of time, its performance may be reduced. Immerse the filter in water

for a few seconds to reinstate optimum performance.

To fill the tank, rotate the cap in the direction

of the arrow

Water tank (fig. 1)

The water tank is made of antibacterial material. This prevents and

reduces the proliferation of bacteria. An internal container, with an

active carbon filtered ensures water filtration. To fill the tank: rotate the

water inlet towards you and fill with water, using a jug or other suitable

container. Once the tank is full, close the water inlet by moving it back to

its original position. Always use drinking water only: any other liquid may

impair product performance.

Obtaining filtered water (fig. 2)

After filling the tank, the water may not be immediately available. This is

because the filtering process may require a few minutes (depending on

the amount of water in the tank).

To dispense water: with the refrigerator door closed, press the water

dispenser tab with the glass. If for safety reason water delivery must be

prevented, simply press the stop at the back of the tab. To release water

delivery, move the stop back to its original position. It is recommended to

drink the supplied water from the dispenser in 6 hours.

Cleaning the water tank (fig. 3-4-5-6-7-8)

Periodically clean the water tank with running water. Twice a year it is

recommended to keep healthy the unit using specific products based

on diluted chlorine that not modify the material properties and rinse with

current water.

To clean the tank, proceed as follows:

- (fig. 3) release and remove the water tank by lifting it and pulling towards

you. Place the tank on a flat surface, remove and wash the top cover.

Note: the tank must be refitted in its position as soon as possible,

to prevent the refrigerator from overheating.

- (fig. 4) remove the internal container and the filter, and wash them

separately.

When washing the filter, only use clean water

(no detergent or sharp

tools). To clean the disk filter, first remove it from the container.

- (fig. 5) for a more thorough cleaning, remove the valve cap (the fitting

connecting the tank to the refrigerator) by rotating it anticlockwise.

Clean the cap. Important: do not pull on the valve body (fig. 6).

- (fig. 7) replace the valve cap by rotating clockwise.

- (fig. 8) fit the tank back in place by placing it between the

lateral guides of the door and pushing it in position, ensuring

that the valve is back in its original seat. Check that the there

are no gaps between the rubber seal of the tank and the

door.

Water Filter Duration

To ensure optimum performance you should change the water filter according with the following table:

Water consumption (average) Filter duration

3,0 l/day 4 months

4,5 l/day 3 months

6,0 l/day 2 months

Filter replacement is not covered by product warranty. To order more water filter cartridges, please contact your

after-sales service.

5019 320 00127

QUICK START GUIDE

ROBG

HUSKCZPLFIDKNOSEGRITPTESNLFRGBDE

Fig. 7

Fig. 8

Activation

device

Stop

Water drip

tray

Fig. 2

Fig. 3

Tank

Fig. 1

Fig. 4

Fig. 5 Fig. 6

Whirlpool WME 3621 X AQUA Program Chart

Brand: Whirlpool

Model: WME 3621 X AQUA

Type: Program Chart

This manual is also suitable for

WME3611 X AQUA

Download PDF

report

Whirlpool WME 3621 X AQUA Program Chart

This manual is also suitable for

Whirlpool WME 3621 X AQUA Program Chart

Related papers

Other documents