ASRock Rack E3C232D2I Quick Installation Manual

Brand: ASRock Rack

Model: E3C232D2I

Type: Quick Installation Manual

E3C236D2I / E3C232D2I

Quick Installation Guide

www.asrockrack.com

No. Description No. Description

1 USB 2.0 Ports (USB_1_2) 5 USB 3.0 Ports (USB3_1_2)

2 LAN RJ-45 Port (IPMI_LAN) 6 LAN RJ-45 Port (LAN1)

3 VGA Port (VGA1) 7 USB 3.0 Ports (USB3_3_4)

4 Serial Port (COM1) 8 LAN RJ-45 Port (LAN2)

P/N: 15G065079100AK V1.0

Install the Server Board

Motherboard Layout

Jumper Cap On/O

The server board User's Manual is available for download from the ASRock Rack's ofcial website

at http://www.asrockrack.com.

Take note of the following precautions before you install server board components or change any

server board settings.

1. Unplug the power cord from the wall socket before touching any components.

2. To avoid damaging the server board’s components due to static electricity, NEVER place your

server board directly on the carpet or the like. Also remember to use a grounded wrist strap or

touch a safety grounded object before you handle the components.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a grounded anti-static pad or in the bag

that comes with the component.

5. When placing screws into the screw holes to secure the server board to the chassis, please do

not over-tighten the screws! Doing so may damage the server board.

Insert the server board into the chassis.

Af f i x the screws clockwise into the

mounting holes in all of the corners of

the server board.

Do not over-tighten the screws

When the jumper cap is placed on the pins, the

jumper is “Short”. If no jumper cap is placed on the

pins, the jumper is “Open”.

The illustration shows a 3-pin jumper whose pin1

and pin2 are “Short” when a jumper cap is placed on

these 2 pins.

I/O Panel

DDR4_B1 (64 bit, 288-pin module)

DDR4_A1 (64 bit, 288-pin module)

Intel

C236

PCIE7

BIOS

ROM

17.0cm (6.7 in)

ATXPWR1

ATX 12V1

CMOS

Battery

FRNT_FAN1

COM1

VGA1

RoHS

BMC

CPU_FAN1

LAN1

Top:

IPMI

LAN

USB 3.0

T: USB_1

B: USB_2

USB 2.0

T: USB_1

B: USB_2

NMI_BTN1

IPMB1

SPEAKER1

USB3_7

USB3_5_6

TPM1

REAR_FAN1

SATA_0 SATA_1 SATA_2

SATA_SGPIO2

E3C236D2I

LAN2

USB 3.0

T: USB_3

B: USB_4

PECI1

M2_1

NUT1

PANEL1

AUX_PANEL1

HDLED RESET

PLED PWRBTN

PSU_SMB1

BMC_SMB1

SATA_SGPIO1

ME_RECOVERY1

SATA_3

SATA_4

SATA_5

PMBUS_SEL_DAT1

PMBUS_SEL_ALT1

PMBUS_SEL_CLK1

CLRMOS1

T 1

No. Description

1 CPU PECI Mode Jumper (PECI1)

2 PMBUS Mode Jumper (PMBUS_SEL_ALT1)

3 PMBUS Mode Jumper (PMBUS_SEL_DAT1)

4 ermal Sensor Header (TR1)

5 ATX Power Connector (ATXPWR1)

6 CPU Fan Connector (CPU_FAN1)

7 Front Fan Connector (FRNT_FAN1)

2 x 288-pin DDR4 DIMM Slots

(DDR4_A1, DDR4_B1, Blue)

9 Clear CMOS Pad (CLRMOS1)

10 SATA SGPIO Connector (SATA_SGPIO1)

11 SATA SGPIO Connector (SATA_SGPIO2)

E3C236D2I: Vertical Type A USB 3.0 (USB3_7)

E3C232D2I: Vertical Type A USB 2.0 (USB3_7)

13 SATA3 Connector (SATA_0)

14 SATA3 Connector (SATA_1)

15 SATA3 Connector (SATA_3)

16 SATA3 Connector (SATA_2)

17 SATA3 Connector (SATA_4)

18 SATA3 Connector (SATA_5)

19 Speaker Header (SPEAKER1)

20 M.2 Slot (M2_1)* (supports M.2 module type 2230)

21 System Panel Header (PANEL1)

22 USB 3.0 Header (USB3_5_6)

23 ATX 12V Power Connector (ATX12V1)

24 PSU SMBus (PSU_SMB1)

25 Auxiliary Panel Header (AUX_PANEL1)

26 TPM Header (TPM1)

Intelligent Platform Management Bus header

(IPMB1)

28 ME Recovery Jumper (ME_RECOVERY1)

29 Non Maskable Interrupt Button (NMI_BTN1)

30 BMC SMBus Header (BMC_SMB1)

31 Rear Fan Connector (REAR_FAN1)

32 PMBUS Mode Jumper (PMBUS_SEL_CLK1)

Note:

E3C23 6D2 I:

Intel C236

E3C232D2I:

Intel C232

(See Note)

*15G065079100AK*

E3C236D2I / E3C232D2I

Quick Installation Guide

www.asrockrack.com

Activity / Link LED Speed LED

Status Description Status Description

O No Link O 10M bps connection or no

link

Blinking Yellow Data Activity Yel low 100M bps connection

On Link Green 1Gbps connection

8 LAN Port LED Indications

Open the socket levers and the

CPU socket cover. Remove the

CPU protection cap.

Install the processor and close

the socket cover.

Close the socket levers.

Install the CPU Fan and Heatsink

CPU_

FAN

Apply the thermal grease. Install the

CPU fan and heatsink and secure

the screws.

Connect the CPU fan to the CPU

FAN connector.

Install the Power Cables

System Panel

Auxiliary Panel

Install the Processor

Install the Memory

Headers

Install the PCIE Card

We recommend using the CPU Installation tool to avoid CPU pin-bent problem.

Activity / Link LED Speed LED

Status Description Status Description

O No Link O 10Mbps connection or

no link

Blinking Yellow Data Activity Yellow 100Mbps connection

On Link Green 1Gbps connection

ACT/LINK LED

SPEED LED

LAN Port

IPMI LAN Port

LAN Port

ACT/LINK LED

SPEED LED

LAN Port

GND

RESET#

PWRBTN#

PLED-

PLED+

GND

HDLED-

HDLED+

GND

SMB_ CLK

SMB_ Ale rt

CASE OPE N

SMB_ DAT A

+3VS B

LAN1 _LI NK

LED_ PWR

LAN2 _LI NK

LED_ PWR

+5VS B

GND

LOCATORLED1+

LOCATOR LED1-

LOCATORBTN#

Syst em Fault LE D-

Syst em Fault LE D+

GND

PWROK_PS

5VSB

12V

-12V

GND

PSON#

GND

N/A

24 13

GND

12V

Unlock a DIMM slot by

pressing the module clips

outward.

Insert the memory module. Lock the clips.

M.2_SSD (NGFF) Module Installation

Prepare a M.2_SSD (NGFF) module and the screw.

Peel o the yellow protective lm on the nut to

be used. Hand tighten the stando into the nut

location on the motherboard.

Align and gently insert the M.2 (NGFF) SSD

module into the M.2 slot. Please be aware that

the M.2 (NGFF) SSD module only ts in one

orientation.

Tighten the screw with a screwdriver to secure the

module into place. Please do not overtighten the

screw as this might damage the module.

NUT1NUT2

NUT1

* e M.2 socket supports M.2 module type 2230 (PCB length: 3 cm).

ASRock Rack E3C232D2I Quick Installation Manual

ASRock Rack E3C232D2I Quick Installation Manual

ASRock Rack E3C232D2I Quick Installation Manual

Related papers

Other documents