ANKO 42757542 is a wireless presenter with a built-in laser pointer. It has a range of up to 10 meters and is compatible with Windows 2000, XP, Vista, and Mac OS X 9.x or later. The presenter has four buttons: next, previous, connect, and escape/resume. The laser pointer button is located on the top of the presenter. To use the presenter, first insert a 1.5V LR03/AAA battery (not supplied) into the battery compartment. Then, insert the USB receiver into a USB socket on your computer. The receiver and presenter will synch up automatically.
ANKO 42757542 is a wireless presenter with a built-in laser pointer. It has a range of up to 10 meters and is compatible with Windows 2000, XP, Vista, and Mac OS X 9.x or later. The presenter has four buttons: next, previous, connect, and escape/resume. The laser pointer button is located on the top of the presenter. To use the presenter, first insert a 1.5V LR03/AAA battery (not supplied) into the battery compartment. Then, insert the USB receiver into a USB socket on your computer. The receiver and presenter will synch up automatically.
Wireless Presenter
keycode: 42757542
Instruction Manual
P190041_Intra_Presenter_w_Laser_20190402.indd 1 2/4/2019 6:52 PM
2
Safety Instructions:
Please read the instruction manual before using this device and follow
all the safety instructions to avoid damage caused by improper use.
Keep the instruction manual for future reference. Should this device
be given to a third party, then this instruction manual must also be
handed over.
Use this device solely for its intended purpose.
Do not immerse the device in water or in other liquids.
Do not use the device if it is damaged.
Do not attempt to repair the device yourself. Repairs must be car-
CAUTION! IMPORTANT SAFETY INSTRUCTIONS
This device includes a laser pointer. Please adhere to
the following warnings and safety instructions:
The device is not a toy. Keep children away from the device.
Improper use can lead to irreparable eye injuries.
WARNING! Never point the laser beam at people or animals.
Never shine a laser pointer into a person’s eyes, or stare into the
laser beam. Pointing a laser pointer into a person’s eyes, or star-
ing directly at the laser beam, can cause instant temporary vision
can be particularly dangerous if the exposed person is engaged in
a vision-critical activity such as driving. In addition, prolonged and/
or repeated exposure to the laser beam can be hazardous and
damaging to eyes. If laser radiation hits your eye, make sure to im-
mediately close your eyes and turn your head away from the beam.
Do not
can act like a direct beam on the eye.
Do not modify the device. Modifying settings, especially such as
radiation!
The purchaser/user is responsible for insuring that his or her pur
Caution – Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation exposure.
-
chase or use of the laser pointer conforms to any local laws.
P190041_Intra_Presenter_w_Laser_20190402.indd 2 2/4/2019 6:52 PM
3
Features:
Transmitter
RF: 2.400 GHz - 2.483 GHz
Battery Type: 1x AAA Battery
Effective RF Communication Range: 10 meters Max
Power Consumption: 30mA max
Receiver
RF: 2.400 GHz - 2.483 GHz
Interface: USB 1.1/2.0
Power: USB Power 5V DC
System Requirements
Hardware: USB interface
Operating System: Mircrosoft Windows2000
Mircrosoft Windows XP
Mircrosoft Windows Vista
Mac OS X 9.x or later
1. Unpack the device and check if all parts are there and undamaged.
Should this not be the case, return the product to Kmart shop for
replacement.
2. Danger of suffocation! Keep all packaging materials away from
children.
3. Remove all protective foils and packaging material prior to use.
P190041_Intra_Presenter_w_Laser_20190402.indd 3 2/4/2019 6:52 PM
4
Product overview
Inserting the Battery
1. Open the battery compartment.
2. Insert one 1.5V LR03/AAA battery (not supplied) into the battery
compartment.
Please note the polarity diagram printed inside the
battery compartment.
3. Replace the battery compartment cover again, making sure it is
Notes on batteries
Only use top-quality batteries. Cheap batteries could leak and damage the device
as a result.
If the battery leaks, remove it with a cloth and dispose of it accordingly. Ensure
that leaking battery acid does not come into contact with skin and eyes. If you do
a physician immediately! If battery acid comes into contact with your skin, wash
the affected area with lots of water and soap.
battery compartmentUSB receiver with blue LED
connection indicator
dark screen
ON/OFF switch
previous
next
laser pointer
button
escape/
resume
connect
button
emitting laser beam
laser pointer
P190041_Intra_Presenter_w_Laser_20190402.indd 4 2/4/2019 6:52 PM
WARNINGS: Insert batteries with the correct polarity and always follow the
manufacturer’s instructions.
Do not mix new and used batteries or alkaline, standard (carbon-zinc), or
rechargeable (nickel-cadmium) batteries.
Remove batteries if product will be stored for an extended period.
Dispose of used batteries responsibly
5
Batteries do not belong in household waste! Expired batteries must be disposed
of in an environmentally friendly way and according to the applicable legal regulations.
Batteries are very dangerous if swallowed. Please keep the batteries and the de-
vice components away from children at all times. If a battery is swallowed, seek
medical attention immediately.
Batteries must not be recharged or activated with other means, dismantled,
thrown into re or short-circuited.
Remove the battery prior to disposing of the device.
Connecting the USB Receiver
1. Remove the USB receiver from the battery compartment (g.1).
2. Insert the USB receiver into a USB socket on your computer
(g.2). Your computer’s operating system will identify the receiver
and install the default driver automatically.
3. The LED connection indicator inside the USB receiver ashes
blue.
Connecting USB receiver and presenter
1. Switch the presenter on by moving the ON/OFF switch to the ON
position.
2. T
he receiver and presenter will synch up automatically.
3. Should this not be the case, press the connect button for about
three seconds.
4. As soon as the connection is established, the blue LED indicator
light stops ashing.
Care and maintenance
1. After use push the ON/OFF switch to Off.
2. Wipe all parts with a dry soft cloth.
ON/OFF switch
g.1 g.2
P190041_Intra_Presenter_w_Laser_20190402.indd 5 2/4/2019 6:52 PM
6
12 Month Warranty
Thank you for your purchase from Kmart.
Kmart Australia Ltd warrants your new product to be free from defects
in materials and workmanship for the period stated above, from the
date of purchase, provided that the product is used in accordance with
accompanying recommendations or instructions where provided. This
warranty is in addition to your rights under the Australian Consumer Law.
Kmart will provide you with your choice of a refund, repair or exchange
(where possible) for this product if it becomes defective within the
warranty period. Kmart will bear the reasonable expense of claiming the
warranty. This warranty will no longer apply where the defect is a result
of alteration, accident, misuse, abuse or neglect.
Please retain your receipt as proof of purchase and contact our Customer
Service Centre on 1800 124 125 (Australia) or 0800 945 995 (New Zealand)
or alternatively, via Customer Help at Kmart.com.au for any difculties
with your product. Warranty claims and claims for expense incurred in
returning this product can be addressed to our Customer Service Centre
at 690 Springvale Rd, Mulgrave Vic 3170.
Our goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement or
refund for a major failure and compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
For New Zealand customers, this warranty is in addition to statutory
rights observed under New Zealand legisla
tion.
P190041_Intra_Presenter_w_Laser_20190402.indd 6 2/4/2019 6:52 PM
-
1
-
2
-
3
-
4
-
5
-
6
ANKO 42757542 is a wireless presenter with a built-in laser pointer. It has a range of up to 10 meters and is compatible with Windows 2000, XP, Vista, and Mac OS X 9.x or later. The presenter has four buttons: next, previous, connect, and escape/resume. The laser pointer button is located on the top of the presenter. To use the presenter, first insert a 1.5V LR03/AAA battery (not supplied) into the battery compartment. Then, insert the USB receiver into a USB socket on your computer. The receiver and presenter will synch up automatically.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
ANKO Car Charger Dual USB User manual
-
Kmart 43088645 User manual
-
ANKO A12PRO Bluetooth Wireless Speaker Sunglasses User manual
-
Kmart 43067381 User manual
-
Kmart 42929048 User manual
-
Kmart 42735687 User manual
-
ANKO 43303274 User manual
-
ANKO 43234073 Dual Port Power Supply User manual
-
-
ANKO 42925538 User manual
