Page is loading ...
Customized Features
Use the information screen and On Demand Multi-Use Display
™
to customize
certain features.
VEHICLE CONTROLS
With the Information Screen
With On Demand Multi-Use Display
™
n How to Change a Setting
Use with the Information Screen
1. Press the
SETTINGS button.
Be sure the power mode is ON and the vehicle is at a complete stop.
2. Rotate the ENTER knob to view categories.
3. Press the ENTER knob to select.
VEHICLE CONTROLS
Use with the On Demand Multi-Use Display
™
1. Rotate the interface dial left or right to scroll through the available
choices.
2. Press to set your selection.
3. Move right, left, up or down to select a secondary menu.
4. Press to switch the display to the Information Menu screen while the
trip computer screen or clock/wallpaper screen is displayed.
5. Press the Back button to go back to the previous display.
Setting the Clock
On vehicles with navigation, the time is automatically set using GPS signals.
On vehicles without navigation and if the Automatic Date & Time feature has
been turned off, use the following steps to adjust the time in the clock display.
Using the Settings Menu on the Information Screen
1. Press the SETTINGS button.
2. Select Clock Settings.
3. Select Clock Adjustment.
4. Tilt the interface dial to choose the
item you wish to change. Rotate the
interface dial to change the value. Press
the interface dial to exit the screen.
5. Press the BACK button to exit out of the menus.
VEHICLE CONTROLS
56 |
n Customizing Door Lock and Unlock Settings
Customize the auto door lock and door unlock settings to your preference.
Begin with the vehicle off.
VEHICLE CONTROLS
For use with the Multi-Information Display
Select your desired item by rolling the multi-function steering wheel
controls. Make sure the vehicle is at a complete stop and the transmission
is put into Park (P).
1. Roll the right selector wheel to select Vehicle Settings and push the
right selector wheel to select.
2. Roll to Door Setup
3. Push Auto Door Lock or roll to Auto Door Unlock and push to select.
For use with the On Demand Multi-Use Display
™
Select your desired setting item by pressing the SETTINGS button. Make
sure that the vehicle is at a complete stop and the transmission is put into
Park (P).
1. Press the SETTINGS button, then select Vehicle Settings.
2. Rotate SETTINGS button, then select Door.
3. Rotate SETTINGS button, then select Auto Door Lock or Auto Door
Unlock and push SETTINGS button.
VEHICLE CONTROLS
/