GB WA 5340 PROGRAMME CHART
5019 401 05364
1)
For improved garment care spin speed is restricted to 800 rpm in this programme.
2)
For improved garment care spin speed is restricted to 400 rpm in this programme.
Programme
Tempe-
rature
°C
Max.
load
kg
Care
Labels
Type of wash/
Degree of soiling
- For temperature selection, respect the
manufacturer's recommendations on the care
label.
Detergent and Additives
Selectable Special Options =
❉
Max.
Spin
speed
rpm
Notes
Softener Main
wash
Pre-
wash
Prewash
Vorwäsche
Prélavage
Intensive
Rinse
Intensiv Spülen
Rinçage
Intensif
Rinse
hold
Spülstopp
Arrêt
Cuve Pleine
Variable
spin
Schleudern
Essorage
White
Cotton
Koch-Buntwäsche
Coton blanc
60-95 6.0
Normally to heavily soiled bed linen, table
linen and underwear, towels, shirts etc.
made of cotton and linen.
❉
Yes
❉❉ ❉ ❉ ❉
1000
“Prewash” can be additionally selected
for heavily soiled laundry at any
temperature.
Cotton
Koch-Buntwäsche
Coton blanc
30-40 5.0
Synthetic
Pflegeleicht
Synthétique
30-40-60 2.5
Normally soiled blouses, shirts and other
outer clothing made of polyester (Diolen,
Trevira), polyamide (Perlon, Nylon) or
mixtures of these fibres with cotton.
❉
Yes
❉❉ ❉ ❉ ❉
1)
800
1)
“Prewash” can be additionally selected
for heavily soiled laundry.
Daily mixed
Mischwäsche
Mixte
40-60 3.0
Slightly to normally soiled textiles made of
cotton and/or synthetic fibres.
❉
Yes
––
❉❉❉
1000
In this programme the spin speed should
be adapted to the fabrics.
Rapid wash
Schnelle Wäsche
Chrono
30 3.0
Hardly worn outer and sports clothing made
of cotton, polyester, polyamid and mixed
cotton fabrics.
❉
Yes
––
–
❉❉
1000
–
Delicate
Feinwäsche
Délicat
30-40 1.5
Curtains and delicate dresses, skirts, shirts
and blouses.
❉
Yes
❉❉
–
❉❉
1)
800
1)
–
Wool
Wolle
Laine
cold
30-40
1.0
Only woollens with a felt-free finish, labelled
with the woolmark and identified as machine
washable.
❉
Yes
––
–
❉❉
1)
800
1)
If you select “Rinse hold” do not leave
items to soak for too long.
Handwash /
Lingerie
Handwäsche /
Dessous
30 1.0
Textiles made of linen, silk, wool or viscose
marked as “handwashable”.
❉
Yes
––
–
❉❉
2)
400
2)
If you select “Rinse hold” do not leave
items to soak for too long. A very gentle
spin is used in this programme.
Sport
Sport
20-30 3.5
Normally soiled and sweaty sportswear
made of cotton jersey, microfibres or other
artificial fibres.
❉
Yes
––
–
❉❉
2)
400
2)
For heavily soiled sportswear, use
“Synthetics” (eventually with prewash),
“Daily mixed” or “Cotton” programmes -
depending on the type of fabrics.
Rinse & Spin
Spülen & Schleudern
Rinçage & Essorage
20 6.0
––
❉
–– –
❉❉❉
1000
Same as the spin cycle in the “Cotton”
programme.
Spin
Schleudern
Essorage
–
6.0
––––––––
❉
1000
In this programme spinning is intensive.
Same as the spin cycle in the “Cotton”
programme.
Drain
Abpumpen
Vidange
–– – – –––– – – ––
This programme only drains (alternative
method of terminating the programme
after “Rinse hold” without spinning). In
addition all running programmes can be
cancelled with this programme.
This washing machine is equipped
with
automatic safety functions
which detect
and diagnose faults at an early stage and react
appropriately, e.g.:
A. “Pump” indicator
B. “Water tap closed” indicator
Check your washing machine’s water supply.
C. “Door locked” indicator
As long as a washing programme is running,
the lamp lights up to show that the door
cannot be opened.
D. “Start” button
E. Programme sequence indicator
F. “Variable spin” button
G. “Reset” button
H. Selectable programmes
B
E
H
C
A
D
{
F G
40105364GB.fm Page 1 Friday, October 27, 2006 5:51 PM
Black process 45.0° 100.0 LPI
5019 401 05364
Add the detergent as described in the chapter
“Detergent and Additives” in the instructions for use.
Turn
the
programme selector knob
in any
direction to the desired programme.
The light above the
“Start”
button flashes.
The programme sequence indicator
and the indicator
with the maximum possible
spin speed
light up.
• Wash your laundry in the desired programme
(Cotton, Synthetics), adding an appropriate
amount of chlorine bleach to the SOFTENER
chamber (close the detergent dispenser carefully).
• Immediately after end of programme, start the “Rinse
and Spin” programme to eliminate any residual bleach
smell; if you want, you can add softener.
“Prewash” button
• Only for heavily soiled laundry (e.g. sand or
granular dirt). Programme duration is increased
by some 15 min.
“Intensive Rinse” button
• An additional rinse cycle is carried out.
• This option is particularly suitable for areas with
very soft water, washing baby linen and helps
people with detergent allergies.
“Rinse Hold” button
• The laundry remains in the last rinse water without
being spun: discoloration of the laundry and
additional creasing are prevented.
• This option is particularly recommended for the
programme “Synthetic” or “Delicate”.
• This function is particularly useful if you want to
postpone spinning to a later time.
Note:
The programme has reached the “Rinse
Hold” when the corresponding light flashes.
Terminate the “Rinse Hold” option:
• Press the “Rinse Hold” button again; the
programme will terminate automatically with the
appropriate spin cycle for the current programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to “Drain” and press
the
“Start”
button again.
CONSUMPTION DATA
*
Programme Temperature
(°C)
Wash
(kg)
Water
(l)
Energy
(kWh)
Programme duration
approx.**
(hours : minutes)
White Cotton
95 6.0 49
***
1.90 2:00
Cotton****
60 6.0 44 1.14 2:20
Cotton
40 5.0 42 0.70 2:05
Synthetic
60 2.5 60
***
0.90 1:45
Synthetic
40 2.5 55 0.60 1:30
Daily mixed
40 3.0 48 0.55 1:00
Rapid wash
30 3.0 37 0.30 0:30
Delicate
30 1.5 60 0.50 0:45
Wool
40 1.0 60 0.50 0:40
Handwash / Lingerie
30 1.0 45 0.40 0:35
Sport
30 3.5 37 0.30 0:30
*
The
consumption values
were measured in normalized conditions in compliance with Standard IEC/EN 60456.
**
The
programme duration
may also vary from the chart values. The washing machine is able to allow for particular
household conditions and to adapt the programme run time accordingly.
***
To reduce the
water temperature
, some cold water is added at the end of the main wash cycle, before the pump
drains the water out.
****
Reference programme for energy label.
POUR IN DETERGENT, CLOSE THE
DOOR AND SELECT A PROGRAMME
USING CHLORINE BLEACH
SELECT SPECIAL OPTIONS - The
corresponding lights go on (if not selectable:
rapid flashing for 3 seconds)
“Variable spin” button
• A maximum spin speed is assigned to each
programme.
• Press the button to set another speed for the
spin cycle.
• If no light goes on, the final spin is cancelled.
The water is only drained out.
After you have selected the programme and the
additional option, the indicator light over the
“Start”
button flashes. Turn on the tap and start the
programme by pressing the
“Start”
button. Now the
indicator light above the button goes on.
In addition, all programme phases are indicated by the
associated lights. After the end of a programme phase,
the associated indicator light goes out. Thus the
programme sequence indicator moves from left to
right across the wash, rinse and spin phases. At the end
of the programme, only the “End” indicator is still on..
As long as a washing programme is running, the lamp
lights up to show that the door cannot be opened.
When the lamp goes off, the door can be opened again.
If
“Start”
has been pressed, but the door is not
latched, the “Door Locked” indicator flashes for 10
seconds. The door must be pushed shut within this
time. After the 10 seconds, the “Door Locked”
indicator goes out and the
“Start”
button flashes.
The door must then be opened and closed again and
the
“Start”
button must be pressed.
“Pump”
Waste water is not pumped out. Check wether the
drain hose is kinked or the filter must be cleaned; in
the latter case refer to the Instructions for Use
(“Removing the Filter”).
“Water tap closed”
The appliance has no or insufficient water supply. Open
the water tap; if the indication still lights up, refer to the
“Troubleshooting Guide” in the Instructions for Use.
• The “End” indicator goes on.
1. Set the programme selector knob to the
“Off” position.
2. Turn off the tap.
3. Open the door and unload the machine.
A newly-selected programme will continue in the
same programme section during which the current
programme was interrupted. Therefore do not add
any more detergent.
1. Press the
“Start”
button to interrupt the
programme. The light flashes.
2. Select the new programme (with temperature),
any additional options and - if you wish - another
spin speed.
3. Press the
“Start”
button again to restart the
programme.
• If you are in the “Prewash” programme step, this
additional option cannot be deselected as
described (to do this see “Cancel (Reset) a
running programme before the end”).
Press the
“Reset”
button for at least 2 seconds.
Any existing water is drained out before the door
can be opened.
PROGRAMME START
“DOOR LOCKED” INDICATOR
“TROUBLE” INDICATORS
PROGRAMME END
RESELECT AFTER PROGRAMME START
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
40105364GB.fm Page 2 Friday, October 27, 2006 5:51 PM
Black process 45.0° 100.0 LPI
/