ELECTROLUX-REX PZ1K Installation guide

Brand: ELECTROLUX-REX

Model: PZ1K

Category: Hobs

Type: Installation guide

ELECTROLUX-REX PZ1K is a glass ceramic puzzle cooktop designed for household use. It features seven different speed settings, allowing for precise control over the cooking temperature. The cooktop has a pilot light that turns on when the hob is working, and it is equipped with various safety features, such as automatic shut-off and overheat protection. The cooktop is easy to clean and maintain, and it comes with a one-year warranty.

073700721 Instructions for installation and use UK

CERAMIC GLASS

PUZZLE COOKTOP

For your safety

The use of this new appliance is east. Nevertheless it is important to read carefully this handbook before installing and using the appliance

for the first time. In this way you can obtain the best performance, avoid wrong behaving, using the appliance in absolute safety and respect

the environment.

Installation

The installation of the appliance and the connection to the

electricity supply has to be carried out by QUALIFIED

PERSONNEL ONLY. Before any intervention it is necessary to

control the appliance is UNCONNECTED from the electricity

supply.

After having unpacked the appliance, make sure the product is

not damaged and that the alimentation cable is in perfect

conditions.

On the contrary. Please contact your retailed before installing

the appliance.

The manufacturer declines any responsibility in case of not

respecting the accident prevention rules.

Children safety

This appliance has to be used only by adults. Make sure

children do not touch the controls or play with this appliance.

The exposed/external elements of this appliance get hot while

cooking and remain hot for a certain period after blowing out.

Keep children away from the equipment until when the

equipment get cold.

While using

It is really important to keep this handbook with the equipment

for any future consultation. If you sell or give the equipment to

any other person, make sure you give to the new user this

handbook in order to be informed on the correct working of the

machine and related warnings.

This appliance is designed solely for household use for

cooking food, inside private houses and not for professional

purpose. Avoid to use this appliance for any other purpose. It

may cause hazard to modify or try to modify the features of this

product.

Keep properly cleaned the equipment. Food remaining may

cause fire risks.

In case of faults do not try to repair personally the equipment.

Repairs carried out by non competent personnel may cause

damages or fire risks.

First of all consult the content of this handbook.

If you do not find the information you need, please contact the

closest Assistance Centre.

The assistance to this appliance has to be carried out by the

authorized Technical Assistance Centre. Please ask for

original spare parts only.

During the cooking where greases or oils are used, look after

your foods, as these substances, if brought to high

temperatures, may blow up.

Avoid to let the hob working without a pot or with an empty

one.

Avoid to use the hob to heathen the room.

After having used this appliance please make sure all controls

are in “OFF” position.

Avoid to let liquids overflow or pour on the cooking area.

Do not leave anything on the hob. Accidental light up may

cause fire risks.

Avoided to use steam or steam appliances to in order to

clean up the equipment.

If you use an electrical outlet near this equipment, be careful

the cables the appliances you are using do not touch it and are

enough far away from the warm parts of this equipment.

Ceramic glass puzzle cook top

The ceramic glass cook top must never be used as a work

surface.

Do not put aluminium sheets or plastic containers on the

ceramic glass cooktop, neither whichever material that

can melt (sugar or foods to high sugar content) and to

damage therefore the glass. If this happens, clean

immediately as long as the surface is still warm . Use a

scraper protecting your hands. Avoid dropping any hard

object on the cook top surface: this could in fact provoke

to a leak or breach of the glass.

ATTENTION! If noticed the presence of a crack on the

glass, unconnected immediately the equipment from the

electrical network in order to avoid the risk of electric

shocks and contact the nearest Assistance Centre.

The use of unsuitable products for the cleaning of the

glass ceramic cannot discolour or scratch the glass. For

this reason, it is necessary to use exclusively SPECIFIC

PRODUCTS FOR THE CLEANING OF GLASS

CERAMIC TOPS.

Do not leave to fall nothing on the glass ceramic hob: this

might damage or break the glass surface

The use of unsuitable products for cleaning the ceramic glass

may fade or scratch the glass surface.

For this reason use exclusively special products for glass tops’

cleaning.

These instructions are only valid for the countries

indicated by the symbols on the cover of the

instruction handbook and the appliance.

Index

Per l'Utente

For your Safety 2

Guide to the instructions’ reading 3

Use instructions 4

Cleaning and maintenance 5

Assistance and spare parts 6

Guarantee conditions 6

Suggestions for the

environment protection.

All the materials used are compatible with the environment and

recyclable. We be you to give your contribute for the

environment conservation, using the proper waste disposals

channels.

The unused appliances are not waste without value. Through

the ecological disposal, different materials used for the

production of Your appliance can be reclaimed.

Please take information on the actual possibilities for the

ecological disposal by your specialized retailer, or through your

local city office.

Before scrapping the appliance, cut the cable the supply cable

in order to make it useless.

For the installer

Technical features 7

Instructions for the installer 7

Connection to the electricity supply 8

Electrical diagram 9

Insertion and connection 11-12

The symbol on the product, or on the documents

accompanying the product, indicates that this appliance may

not be treated as household waste. Instead it shall be handed

over the applicable collection point for the recycling of

electrical and electronic equipment.

Disposal must be carried out in accordance with local

environmental regulations for waste disposal.

For more detailed information about treatments, recovery and

recycling of this product, please contact your local city office,

your household waste disposal service or the shop where you

purchased the product.

Guide to the instructions reading

These symbols will help you in finding quickly the most important information.

Safety information

"Step by step" instructions

Useful advices and suggestions

Information related to the environment protection

This appliance is in conformity with the following

Directives CEE:

- 73/23 e 90/683 (related to the Low Voltage);

-89/336 (related to the Electromagnetic

Compatibility);

- 90/396 (related to the Gas working appliances)

- 93/68 (related to the General Directives and

following modifications.

These instructions are only valid for the countries

indicated by the symbols on the cover of the

instruction handbook and the appliance.

What to do the first time of usage

On its first usage it is always suggestible to heathen the

appliance on its maximum speed for about 10 minutes, by

positioning on the cooking spaces a pot containing water so to

avoid eventual unpleasant smells caused by the thermal

isolation or production’s residuals. Air the room during the

entire operation

During the first minutes of working IT IS

ABSOLUTELY NORMAL that the appliance emits

smoke and unpleasant smells.

This inconvenience will disappear after a few minutes

of usage.

Usage instructions

Before using the appliance, remove all the

packing materials, advertising labels

included and eventual protective film.

The control knobs of the cooker

top

The cooking areas can be used by turning the correspondent

knob. (Figure 1).

The knob can be turned on 7 different positions, from "0"

(turned off) to "6" (maximum speed).

The hob has is equipped of a pilot light that turns on when the

hob is working.

For a correct use of the burners.

For a better performance of the hobs and a smaller electrical

consume: (Figure 2):

• use recipients with a thick bottom only, that permit a better

heath distribution;

• prefer recipients with a flat bottom, that assure an ideal

heath transmission;

• use recipients which dimensions fit with the hob, in order to

cover completely the cooking area and to grant the use of

the all heath available;

• use recipients with a smooth bottom only. Recipients with a

rough bottom and/or damaged, in fact, may scratch the hob

surface;

• make sure that the pots’ bottoms are always dried and

cleaned, to grant a proper contact and a long endurance of

the hob and pots themselves;

• do not lean pots or pans on the hob edge;

• do not use the cooking areas as a support or working top ;

• do not put any kind of material between the hob and the pot;

Fig. 1

• never cook food (eggs, grilled food) directly on the hob

surface;

• avoid that boiling liquids overflow and pour themselves on

the cooking;

• avoid to let the hob working without a pot or with an empty

one;

• do not leave anything one the hob. The accidental turning on

might cause fire.

• Turn on the hob only after having positioned the pot;

• Avoid to put hot pans or pots on the cold cooking areas;

• Do not warm up empty pots on the hob;

• Do not use the hob to warm up the room.

•

Materials: Pots with a copper or aluminium bottom are not

suggested as they can leave halos on the hob surface, which

are difficult sometimes to be removed.

Diameter: The diameter of the pot must correspond to the

diameter of the warming element.

The maximum thickness of the bottom is 2-3 mm.

For enamelled pots it is 4-6 mm. For stainless steel pots it

is…..

During the cooking where greases of oils

are used, look carefully at your cooking as

these substances can cause fire if brought

to an high temperature.

In the following diagram we supply you some suggestions on

the hob use. The indicated levels are purely by way of example

(as they may be subjected to different results depending on the

type of pot used and to the quantity of food cooked) and may

be adapted to the personal needs and tastes.

Cleaning and maintenance

Before any intervention the appliance has to be

unconnected from the electricity supply.

Avoid the use of steam or steam appliances.

General cleaning

Clean the stainless steel or aluminium parts with a humid

sponge and rinse accurately after any cleanings with a soft

cloth.

Avoid the use of seam sponges, steel wools, acids or abrasive

products that could damage the surfaces.

For persistent stains use normal non-abrasive detergents or

specific products, commonly on the market.

We recommend not to use seam sponges, steel wools or acids

for the cleaning.

Cleaning of the ceramic glass

Clean the hob when still warm

For the hob cleaning, use:

• blotting paper or a cloth wet on tepid water for the daily

cleaning of the;

• a specific scraper for glass ceramic tops to remove food

remaining or grease splashes;

• a specific product for the cleaning of the glass ceramic tops

to remove limestone traces, grease or aluminium from the

surface of the hob.

Before to start preparing the food, the surface has to be

cleaned with a humid cloth to remove dust or any remaining of

food previously cooked.

Attention! Do not use metal or abrasive sponges

or detergents, nor chemically aggressive

products like oven spray or stain removers

Do not use sweet detergents (for example

products for majolica cleaning), which, if not

properly rinsed, may cause a corrosive effect or

decant the hob surface.

Do not lean materials which could melt on the

hob, as aluminium sheets, plastic materials,

sugar or food containing sugar.

Attention! If one of these products melt on the

glass ceramic top, remove it with a scraper (while

the hob surface is still warm). Eventually,

complete the cleaning with a specific product.

Assistance and spare parts

This appliance, before leaving the warehouse, has been

tested and set by qualified personnel to obtain the best

working performance. If any repairs are required, they

have to be done with the maximum care and attention.

For this reason we recommend you to contact the

retailer who dealt with the sale or the closest Assistance

Centre, specifying the type of inconvenience, the

appliance model (Mod.), the product number (Prod.

No.) and the manufacturing number (Ser. No.). These

datum are indicated on the label on the last page of the

handbook.

Original spare parts, certified by the product

manufacturer and countersigned by this brand, are

available by our Technical Assistance Centres and

Authorized Spare Parts Shops only.

Guarantee conditions

This new appliance is covered by guarantee. The

guarantee conditions are fully indicated on the leaflet

“TOP SERVICE”, which will be found on the inside of the

appliance.

Keep carefully, with the leaflet “TOP SERVICE” the

receipt or the transport bill, useful to support the

purchase of his appliance and the date of it.

In case of intervention by the Assistance Service, show

these documents to the charged personnel. Without the

respect of this procedure, the Assistance Service will be

obliged to debit you any eventual repairs.

The Technical Assistance Service, throughout its

numerous authorized Centres, gives assistance in Italy

to the most prestigious brands of appliances. If

necessary you can look for the closest Centre by

consulting the “TOP SERVICE” leaflet.

Technical features

Power of electrical plates

External cooking area Ø 230 mm 1,45 kW

Internal cooking area Ø 137 mm 0,75 kW

Maximum total power 2,2 kW

Feeding tension 230 V 50 Hz

Dimensions for the recess

opening

Width 377+(1- 0) mm

Depth 443 mm

Instructions for the installer

The installation of the appliance and the connection to

the electric network must be by QUALIFIED

PERSONNEL ONLY. Before any intervention, it is

necessary to verify that the equipment is

disconnected from the electrical network.

• The sides of the cabinet where the appliance is

recessed must not to be higher than the worktop.

DO NOT install the appliance next to flammable

materials (blinds,...).

Before any intervention, it is necessary to verify that

the equipment is DISCONNECTED from the electrical

network.

THE CONSTRUCTOR COMPANY DECLINES

FROM ANY RESPONSABILITY IN CASE OF

DEMAGES CAUSED BY AN INSTALLATION NOT

IN COMPLIANCE WITH THE CURRENT

REGULATIONS AND WITHOUT RESPECTING

THE ACCIDENT PREVENTION RULES.

Electrical connection

The appliance is set up for a single-phase 230V feeling

voltage. The connection has to be carried out in compliance

with the current directives and law dispositions.

Before connecting the hob make sure that:

• The shaping valve and the electrical system can stand the

appliance load (see the serial number indicated on the rating

plate);

• The feed system of the appliance has a proper earth

connection, according the laws in force;

• The tap or the single-pole circuit breaker are easy to be

reached from the installed appliance.

Mount on the cable a suitable tap for the load and connect it to

a proper safety tap.

If a straight connection to the electricity is desired, it is

necessary to put a single-pole, with a minimum opening of

3mm dimensioned to the load and in compliance with the

current directives, between the appliance and the network.

The brown phase wire (coming out from the L terminal on the

terminal board) must be always connected to the phase of the

feeding network.

In any case the feeding wire has to be positioned so that it

cannot reach, anywhere in its length, a temperature higher

than 50°C.

An example of optimal current path is indicated on Fig. 3. The

wire is guided by the employment of clamps fixed on the side

of the furniture, in order to avoid any contact with the appliance

under the hob

Replacing the electrical power

cable

If necessary the electrical power must be replaced

exclusively with power cables type H05V2V2-F T90

suitable for the load and temperature rating.

It is also important that the earth wire (Yellow/Green)

must be at least 2 cm longer than the other phase

neutral (Figure 4-5).

The replacement of the cable has to be done by

qualified personnel only, in order to prevent any kind of

risks.

Fig.3

Fig.5 Fig.4

Electrical diagram of the hob

Typology of the hobs

Hob with thick edge

Flush-fitted hob

Positioning and connection

Cookers can be mounted on a furniture with a recess opening with dimensions shown in Figure 6.

The recess opening has to space at least 50 mm. From the back side. The eventual right or left side, if higher than the

hob, has to space at least is 100 mm. from the cut on the top.

The fixing of the hob to the top has to be done as follows:

Position the suitable dope, not issued, on the front, back and side edges of the worktop’s opening (as shown in

Figure 6).

Lean the hob on the opening of the furniture paying attention to centre it.

Fix the hob to the cabinet using the provided brackets (see Figure 8). The traction of the screws is enough to trace

the dope, whose excess could easily therefore be removed.

Fig.6

Dimensions of the hob

Fig.7

Fig.8

ELECTROLUX-REX PZ1K Installation guide

Brand: ELECTROLUX-REX

Model: PZ1K

Category: Hobs

Type: Installation guide

Download PDF

report

ELECTROLUX-REX PZ1K Installation guide

ELECTROLUX-REX PZ1K Installation guide

Related papers

Other documents