Pleasant Hearth AH-1200 Installation guide

Type
Installation guide

This manual is also suitable for

Before you buy, get the right fit.
Antes de comprar, tome la medida correcta.
1. For Masonry fireplaces only – not prefabricated. This firescreen is
designed to surface mount on the outside of the fireplace.
2. Measure the width and height of your fireplace opening to the
nearest 1/8”.
3. Select the required size based on the Glass Firescreen sizing chart.
Width/
Ancho
Fits Opening / Se ajusta a aberturas
Height / Altura
Height includes 2 in. riser bar/
Height includes 2 in. riser bar/
Altura incluye una barra vertical
de 5,08 cm
Altura incluye una barra vertical
de 5,08 cm
Small/
Pequeña
Medium/
Mediana
Large/
Grande
30 in. - 37 in. 22 1⁄2 in. - 29 1⁄2 in.
25 1⁄2 in. - 32 1⁄2 in.
36 in. - 43 in.
30 in. - 37 in.
25 1⁄2 in. - 32 1⁄2 in.
Overall Dimensions/
Dimensiones Generales
Size/
Tamaño
37 1/2 in. W x 30 in. H
37 1/2 in. W x 33 in. H
43 1/2 in. W x 33 in. H
76,20 cm a 93,98 cm 57,15 cm a 74,93 cm
64,77 cm a 82,55 cm
91,44 cm a 109,22 cm
76,20 cm a 93,98 cm
64,77 cm a 82,55 cm
95,25 cm x 76,20 cm
95,25 cm x 83,82 cm
110,49 cm x 83,82 cm
10-13-247
1. Sólo para chimeneas de mampostería, no prefabricadas. Esta pantalla cortafuego está
diseñada para montaje superficial sobre la parte exterior de la chimenea.
2. Vuelva a realizar ambas mediciones y asegúrese de que tengan un margen de error
inferior a 0,32 cm.
3. Seleccione el tamaño necesario según la tabla de medidas de pantallas para chimenea
de vidrio.
HEIGHT
ALTURA
WIDTH
ANCHO
Cómo tomar la medida
  • Page 1 1

Pleasant Hearth AH-1200 Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI