Item No.
Quantity
FOOD PREPARATION
SERIES PREP TABLES
SPED60 ELITE SERIES
STANDARD TOP WITH DRAWERS
MODELS:
SPED60
Commercial Refrigeration Equipment
General Specification
SPED60 ELITE SERIES — STANDARD TOP
WITH DRAWERS
All around prep table with enhanced refrigeration system. Improved airflow
for less temperature gradient and uniform temperature distribution through-
out the cabinet. Pans are cooled from the bottom, eliminating the necessity
of air blanket. Airflow assures that product in open containers is kept below
41°F and above freezing. This translates into increased product shelf life,
higher quality food, better food appearance, fresher product and a reduction
of bacteria build-up to combat food-borne illnesses.
CABINET CONSTRUCTION
Exterior construction includes heavy-duty stainless steel finish on front,
sides, top, drawers and grille. Removable hoods and insulated lid assem-
blies are made of matching stainless steel. Cabinet back and bottom are
constructed of galvanized steel. Interior liner is made of anodized alumi-
num for superior resistance to corrosion.
In cabinets with doors and drawers, doors are mounted to face of cabinet
on cartridge-style hinges permitting them to self close under their own
weight. Hinges also allow doors to stay open 120° and permit easy door
removal for service and cleaning if required. A plug-in type vinyl magnetic
gasket is attached to each door for positive seal.
Drawer frames are constructed of heavy-duty stainless steel and are sup-
ported on heavy-duty telescoping drawer slides for maximum support of
stored food products. The drawer slides have a locking mechanism that
prevents the drawers from being inadvertently pulled off the cabinets.
Upper pull-out drawers accommodate 6” deep pans. Lower pull-out draw-
ers accommodate two 4” deep pans. Heavy-duty pan divider supports are
supplied. Foodservice pans for drawers are not included. Snap-type vinyl
magnetic gasket is attached to each drawer for positive seal. Top drawer
extends 17 3/4” (when opened) and bottom drawer extends 15 3/4” (when
opened).
Cabinet insulation is CFC and HCFC-free foamed-in-place polyurethane of
two-inch minimum thickness. Six-inch casters, 2 with brakes, are standard.
Legs are available as an option.
Cutting board supplied with cabinet is 10” wide constructed of high-density
white polyethylene plastic. It is readily removable for cleaning. Pans
furnished for top are 4” deep and made of polycarbonate plastic.
REFRIGERATION
More robust refrigeration system provides added capacity and efficiency.
Systems are designed using CFC and HCFC-free R134a refrigerant.
Recirculated, forced air from evaporator is moved under pans, which are
recessed 2” from top of cabinet. Forced air over the condenser is drawn
through grille under bottom drawer as well as the back and bottom of cabi-
net. Automatic condensate evaporator is provided to eliminate the need of
floor drains.
Available From:
ELECTRICAL CONNECTION
Units pre-wired at factory and
include 8’ long cord and plug set.
*Note: Not all markings may apply to all model variations.
SPED60-16-2 (pictured)
3779 Champion Blvd., Winston-Salem, NC 27105
1-888-845-9800 Fax# 1-336-245-6453
http://www.Beverage-Air.com
Store#
Quantity
Model Specified
Location
Food Prep Table — Standard Top With Drawers
Models: SPED60
MODEL SPED60-08-2 SPED60-08-4 SPED60-10-2 SPED60-10-4 SPED60-12-2 SPED60-12-4 SPED60-16-2 SPED60-16-4
EXTERNAL DIMENSIONAL DATA
Length Overall (inches)
Length Overall (mm)
60”
1524
60”
1524
60”
1524
60”
1524
60”
1524
60”
1524
60”
1524
60”
1524
Depth Overall (inches)
Depth Overall (mm)
29 1/4”
743
29 1/4”
743
29 1/4”
743
29 1/4”
743
29 1/4”
743
29 1/4”
743
29 1/4”
743
29 1/4”
743
Height Overall— (inches)
Height Overall— (mm)
41 11/16”
1059
41 11/16”
1059
41 11/16”
1059
41 11/16”
1059
41 11/16”
1059
41 11/16”
1059
41 11/16”
1059
41 11/16”
1059
Number of drawers 2 4 2 4 2 4 2 4
Number of doors 1 - 1 - 1 - 1 -
Top Drawer Extension (when opened) 17 3/4” 17 3/4” 17 3/4” 17 3/4” 17 3/4” 17 3/4” 17 3/4” 17 3/4”
Bottom Drawer Extension (when opened) 15 3/4” 15 3/4” 15 3/4” 15 3/4” 15 3/4” 15 3/4” 15 3/4” 15 3/4”
INTERNAL DIMENSIONAL DATA
NET Capacity (cubic ft.)
NET Capacity (Liters)
17.1
484
17.1
484
17.1
484
17.1
484
17.1
484
17.1
484
17.1
484
17.1
484
Internal Length Overall (inches)
Internal Length Overall (mm)
56”
1422
56”
1422
56”
1422
56”
1422
56”
1422
56”
1422
56”
1422
56”
1422
Internal Depth Overall (inches)
Internal Depth Overall (mm)
19”
483
19”
483
19”
483
19”
483
19”
483
19”
483
19”
483
19”
483
Internal Height Overall—(inches)
Internal Height Overall—(mm)
23”
584
23”
584
23”
584
23”
584
23”
584
23”
584
23”
584
23”
584
ELECTRICAL DATA
Full Load Amperes 115/60/1 9.6 9.6 9.6 9.6 9.6 9.6 9.6 9.6
REFRIGERATION DATA
Horsepower 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3
WEIGHT DATA
Gross Weight (Crated lbs) 350 360 350 360 350 360 329 360
Gross Weight (Crated kg) 159 163 159 163 159 163 149 163
PLAN VIEWS
TOP PAN
CONFIGURATIONS
Note: Not all markings may apply to all model variations.
*N/A:: Not available at time of printing.
SPED60-08
SPED60-10
SPED60-12
MODEL # OF PAN
SUPPORTS
(SUPPLIED)
POSSIBLE PAN
COMBINATION
SPED60 1 FULL SIZE PAN
2 HALF SIZE PANS
6 1/6TH SIZE PANS
3 1/3RD SIZE PANS
2
DRAWER SUPPORT CAPACITY
SPED60-16
BEVERAGE-AIR
®
CORPORATION
3779 Champion Blvd. • Winston-Salem, NC 27105 USA • (336) 245-6400 • Fax (336) 245-6453 • (888) 845-9800 • www.beverage-air.com
Specifications are subject to change without prior notice. 06/10
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Beverage-Air SPE36-08 Food Preparation Prep Tables Datasheet
-
-
-
-
-
-
Beverage-Air UCR48A Datasheet
-
-
-