WA593 Instructions
.A.S.U ni detnirPdetaroprocnI eruhS 4002©
27A8825 (Rev. 1)
WA593 Half Rack Stack Pack
The WA593 Half Rack Stack Pack is designed to attach two Shure half-rack units
together into a single portable pack. This eliminates the need for a 19-inch rack.
The following units are compatible with the WA593:
• P2T
• P4T
• P4M
• ULXS4
• ULXP4
• SCM262
• SCM268
• DFR11EQ
• DP11EQ
Setup Instructions:
1. Attach the handle to either of the two supplied
brackets, as illustrated in Figure 1.
2. Choose which of the two units will be on top and
which will be on the bottom and begin with the bot-
tom unit.
Note: We recommend that units be oriented
in the same way: both facing front and both
right-side up.
3. Attach the bracket with the handle to the bottom
of the unit, using two of the supplied screws.
4. Stack the top unit on the bottom unit.
5. Attach the handle bracket to the top unit
using two of the supplied screws
6. Attach the remaining bracket to the
other side in the same manner.
Refer to figure 2.
7. Attach the supplied rubber feet
to the bottom of the stack, or
onto the side of the stack oppo-
site the handle.
Figure 2
Figure 1
SHURE Incorporated Web Address: http://www.shure.com
5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
In U.S.A., Phone: 1-847-600-2000 Fax: 1-847-600-1212
In Europe, Phone: 49-7131-72140 Fax: 49-7131-721414
In Asia, Phone: 1-852-2893-4290 Fax: 1-852-2893-4055
International Fax: 1-847-600-6446
-
1
