Smeg CS9IMXA User manual

Brand: Smeg

Model: CS9IMXA

Category: Hobs

Type: User manual

Contents

1 Instructions 4

1.1 General safety instructions 4

1.2 Identification plate 6

1.3 Manufacturer liability 6

1.4 Appliance purpose 6

1.5 This user manual 6

1.6 How to read the user manual 6

2 Description 7

2.1 General Description 7

2.2 Cooking hob 8

2.3 9

2.4 Control panel 9

2.5 Other parts 9

2.6 Available accessories 10

3 Use 11

3.1 Instructions 11

3.2 First use 12

3.3 Using the accessories 13

3.4 Using the cooktop 13

3.5 Using the storage compartment 18

3.6 Using the oven 18

3.7 Cooking advice 20

3.8 Programmer clock 22

4 Cleaning and maintenance 27

4.1 Instructions 27

4.2 Cleaning the appliance 27

4.3 Removing the door 28

4.4 Cleaning the door glazing 29

4.5 Removing the internal glass panes 29

4.6 Vapour Clean 30

4.7 Extraordinary maintenance 32

5 Installation 34

5.1 Clearances above and around domestic appliances 34

5.2 Positioning 35

5.3 Electrical connection 41

5.4 For the installer 42

We advise you to read this manual carefully, which contains all the instructions for

maintaining the appliance's aesthetic and functional qualities.

For further information on the product: www.smeg.com

Instructions

1 Instructions

1.1 General safety instructions

Risk of personal injury

• During use the appliance and its

accessible parts become very hot.

• Never touch the heating elements

during use.

• Keep children under eight years

of age at a safe distance if they

are not constantly supervised.

• Children must never play with the

appliance.

• This appliance may be used by

children aged at least 8 and by

people of reduced physical,

sensory or mental capacity, or

lacking in experience in the use of

electrical appliances, as long they

are supervised or instructed by

adults who are responsible for

their safety.

• Never rest metallic objects such

as knives, forks, spoons and lids

on the appliance during use.

• Switch the appliance off

immediately after use.

• Never try to put out a fire or

flames with water: turn off the

appliance and smother the flames

with a fire blanket or other

appropriate cover.

• Not suitable for use with

aftermarket lids or covers.

• The appliance must never be

cleaned by unsupervised children.

• Have authorised persons carry

out installation and assistance

interventions according to the

standards in force.

• Do not modify this appliance.

• Do not insert pointed metal

objects (cutlery or utensils) into the

slots in the appliance.

• Do not try to repair the appliance

yourself or without the intervention

of authorised persons.

• If the power supply cable is

damaged, contact technical

support immediately and they will

replace it.

• Do not open the storage

compartment when the oven is on

and still hot.

• The items inside the storage

compartment could be very hot

after using the oven.

• Do not spray aerosols in the

vicinity of this appliance while it is

in operation.

• This appliance is not to be

installed in marine craft or in

caravans.

• Do not use or store flammable

materials in the appliance storage

drawer or near the appliance.

Instructions

Risk of damaging the appliance

• Do not use abrasive or corrosive

detergents on glass parts (e.g.

powder products, stain removers

and metallic sponges).

• Racks and trays have to be

inserted into the side guides until

they come to a complete stop.

The mechanical safety locks that

prevent the rack from being taken

out accidentally have to face

downwards and towards the

oven back.

• Use wooden or plastic utensils.

• Do not seat on the appliance.

• Do not use steam jets for cleaning

the appliance.

• Do not obstruct ventilation

openings and heat dispersal slots.

• Never leave the appliance

unattended during cooking

operations where fats or oils

could be released.

• Never leave objects on the

cooking surface.

• Do not use the appliance to heat

rooms for any reason.

• Remove any food residues or

large spills from previous cooking

operations from the inside of the

oven.

• If cracks or fissures form, or if the

glass ceramic cooking surface

breaks, turn off the appliance

immediately. Disconnect the

power supply and call Technical

Support.

• People who have pacemakers or

other similar devices fitted must

make sure that the operation of

these devices is not jeopardised

by the inductive field, whose

frequency range is between 20

and 50 kHz.

• In conformity with the provisions

regarding electromagnetic

compatibility, the electromagnetic

induction cooking cooktop comes

under group 2 and class B (EN

55011).

For this appliance

• Before replacing the bulb, switch

off the power supply to the

appliance.

• Do not rest any weight or sit on

the open door of the appliance.

• Take care that no objects are

stuck in the doors.

Instructions

1.2 Identification plate

• The identification plate bears the

technical data, serial number and brand

name of the appliance. Do not remove

the identification plate for any reason.

1.3 Manufacturer liability

The manufacturer declines all liability for

damage to persons or property caused by:

• use of the appliance other than the one

envisaged;

• non-observance of the user manual

provisions;

• tampering with any part of the

appliance;

• use of non-original spare parts.

1.4 Appliance purpose

• This appliance is intended for cooking

food in the home environment. Every

other use is considered improper.

• The appliance is not designed to

operate with external timers or with

remote-control systems.

1.5 This user manual

This user manual is an integral part of the

appliance and must therefore be kept in its

entirety and in an accessible place for the

whole working life of the appliance.

Read this user manual carefully before using

the appliance.

1.6 How to read the user manual

This user manual uses the following reading

conventions:

1. Sequence of instructions for use.

• Standalone instruction.

Instructions

General information on this user

manual, on safety and final

disposal.

Description

Description of the appliance and its

accessories.

Use

Information on the use of the

appliance and its accessories,

cooking advice.

Cleaning and maintenance

Information for proper cleaning and

maintenance of the appliance.

Installation

Information for authorised persons:

installation, operation and

inspection.

Safety instructions

Information

Advice

Description

2 Description

2.1 General Description

1 Backguard

2 Cooktop

3 Control panel

4 Oven light

5 Seal

6 Door

7 Fan

Rack/tray support frame shelf

Description

2.2 Cooking hob

* Power levels are approximate and can vary according to the pan used or the settings made.

Advantages of induction cooking

• Energy saving thanks to the direct

transmission of energy to the pan

(suitable magnetisable cookware is

required) compared to traditional

electric cooking.

• Improved safety as the energy is only

transmitted to the pan placed on the hob.

• High level of energy transmitted from the

induction cooking zone to the base of

the pan.

• Rapid heating speed.

• Reduced danger of burns as the cooking

surface is only heated under the base of

the pan; foods which overflow do not

stick.

Zone Outside diameter (mm) Max. power draw (W)*

Power draw in booster function

(W) *

1 145

1400 2200

2 180

1850 3000

3 210

2300 3700

4 270

2600 3700

The hob is equipped with an

induction generator for each

cooking zone. Each generator

located under the glass ceramic

cooking surface creates an

electromagnetic field which

induces a thermal current in the

base of the pan. This means the

heat is no longer transmitted from

the hob to the pan but created

directly inside the pan by the

inductive current.

Description

2.3

2.4 Control panel

1 Cooking zone control knobs

Useful for controlling the cooking zones of

the induction hob.

Turn the knobs clockwise to adjust the

operating power of the hot plate from a

minimum of 1 to a maximum of 9.

The working power is indicated on the

display on the hob.

2 Indicator light

The indicator light comes on to indicate that

the oven is heating up. It turns off as soon as

it reaches the set temperature. It flashes

regularly to indicate that the temperature set

inside the oven is kept constant.

3 Temperature knob

This knob allows you to select the cooking

temperature.

Turn the knob clockwise to the required

value, between the minimum and maximum

setting.

4 Programmer clock

Useful for displaying the current time, setting

programmed cooking operations and

programming the minute minder timer.

5 Function knob

The oven's various functions are suitable for

different cooking modes. After selecting the

required function, set the cooking

temperature using the temperature knob.

2.5 Other parts

Cooling fan

The fan cools the oven and comes into

operation during cooking.

The fan causes a steady outflow of air from

above the door which may continue for a

brief period of time even after the appliance

has been turned off.

Interior lighting

The appliance interior lighting comes on:

• When the door is opened

• When any function is selected

Do not obstruct ventilation

openings and heat dispersal slots.

Description

Shelves

The appliance features shelves for

positioning trays and racks at different

heights. The insertion heights are indicated

from the bottom upwards (see 2.1 General

Description).

2.6 Available accessories

Scraper

Useful for cleaning the cooktop.

Rack

Useful for supporting containers with food

during cooking.

Tray

Useful for collecting fat from foods placed

on the rack above.

Deep tray

Useful for collecting fat from foods placed

on the rack above and for cooking sweets,

biscuits, etc.

Some models are not provided

with all accessories.

The accessories intended to come

into contact with food are made of

materials that comply with the

provisions of current legislation.

Supplied and optional accessories

can be requested to Authorised

Assistance Centres. Use only

original accessories supplied by

the manufacturer.

Use

3 Use

3.1 Instructions

High temperature inside the oven

during use

Danger of burns

• Keep the oven door closed during

cooking.

• Protect your hands wearing heat

resistant gloves when moving food

inside the oven.

• Do not touch the heating elements inside

the oven.

• Do not pour water directly onto very hot

trays.

• Do not allow children younger than 8

years old to come near the appliance

when in operation.

• If you need to move food or at the end

of cooking, open the door 5 cm for a

few seconds, let the steam come out,

then open it fully.

• Oils and fats could catch fire if

overheated. Be very careful.

Improper use

Danger of burns

• Make sure that the flame-spreader

crowns are correctly positioned in their

housings with their respective burner

caps.

• Oils and fat could catch fire if

overheated. Be very careful.

Improper use

Risk of damage to surfaces

• Do not cover the bottom of the oven

cavity with aluminium or tin foil sheets.

• If you wish to use greaseproof paper,

place it so that it will not interfere with the

hot air circulation inside the oven.

• Do not place pans or trays directly on

the bottom of the oven cavity.

• Do not use the open door to rest pans or

trays on the internal glass pane.

• Do not pour water directly onto very hot

trays.

• Cooking vessels or griddle plates

should be placed inside the perimeter of

the cooktop.

• All pans must have smooth, flat bottoms.

• If any liquid does boil over or spill,

remove the excess from the cooktop.

• Never place pans with bases which are

not perfectly flat and smooth.

• Avoid hard, solid objects falling on the

surface of the cooktop.

• In case you notice cracks or fissures, turn

off the appliance immediately,

disconnect the power supply and

contact Technical Support.

• Do not use the cooktop as a support

surface.

Use

3.2 First use

1. Remove any protective film from the

outside or inside of the appliance,

including accessories.

2. Remove any labels (apart from the

technical data plate) from the

accessories and from the oven cavity.

3. Remove all the accessories from the

appliance and clean them (see 4

Cleaning and maintenance). Heat the

empty oven at the maximum temperature

to burn off any residues left by the

manufacturing process.

Oven cavity

4. Heat the empty oven at the maximum

temperature to burn off any residues left

by the manufacturing process.

Glass ceramic hob

5. Place a pan full of water on each of the

front cooking zones and switch them on

to the maximum power setting for at least

30 minutes.

6. After 30 minutes, switch off the front

cooking zones and repeat this operation

for the rear cooking zones and any

central cooking zone.

7. If after carrying out the above operations

the controls do not work properly, it

might be necessary to extend the

operations until the moisture has

completely evaporated.

High temperature inside the oven

during use

Danger of fire or explosion

• Do not spray any spray products near

the oven.

• Do not use or leave flammable materials

near the oven or the storage

compartment.

• Do not use plastic kitchenware or

containers when cooking food.

• Do not put sealed tins or containers in

the oven.

• Do not leave the oven unattended

during cooking operations where fats or

oils could be released.

• Remove all trays and racks which are

not required during cooking.

Use

3.3 Using the accessories

Racks and trays

Racks and trays have to be inserted into the

side guides until they come to a complete

stop.

• The mechanical safety locks that prevent

the rack from being taken out

accidentally have to face downwards

and towards the oven back.

3.4 Using the cooktop

All the appliance’s control and monitoring

devices are located together on the front

panel. The relevant cooking zone is

indicated next to each knob.

Just turn the knob clockwise to the required

power setting.

Cookware suitable for use in induction

cooking

Cookware used on the induction cooking

surface must be made of metal, with

magnetic properties and a sufficiently large

base.

Suitable cookware:

• Enamelled steel cookware with thick

bases.

• Cast iron cookware with an enamelled

base.

• Cookware in multilayer stainless steel,

ferritic stainless steel and aluminium with

a special base.

Unsuitable cookware:

• Copper, stainless steel, aluminium,

fireproof glass, wood, ceramic and

terracotta cookware.

Gently insert racks and trays into

the oven until they come to a stop.

Clean the trays before using them

for the first time to remove any

residues left by the manufacturing

process.

On first connection to the electrical

mains, an automatic check will be

carried out that will switch on all

indicator lights for a few seconds.

After use, turn off the hot plates

used by returning the appropriate

knob to the O position. Never rely

solely on the cookware detector.

Use

To see whether the pan is suitable, bring a

magnet close to the bottom: if it is attracted,

the pan is suitable for induction cooking. If

you do not have a magnet, you can put a

small amount of water in the pan, place it

on a cooking zone and start the hot plate. If

the symbol appears on the display, it

means the pan is not suitable.

Cookware recognition

When there is no saucepan on a cooking

zone or if the saucepan is too small, no

energy will be transmitted and the symbol

will appear on the display.

If there is a suitable saucepan on the

cooking zone, the recognition system

notices it and turns on the hob to the power

level set using the knob. Energy transmission

is also interrupted when the saucepan is

removed from the cooking zone (the

symbol will be shown on the display).

If the cookware recognition function is

activated in spite of the saucepan or frying

pan on the cooking zone being smaller

than the zone itself, only the necessary

energy will be transmitted.

Cookware recognition limits: The minimum

diameter of the pan base is indicated by a

circle inside the cooking zone. Pans with

smaller diameters risk not being detected

and therefore not activating the inductor.

Use only cookware with a

perfectly flat bottom which is

suitable for induction hot plates.

Using cookware with an irregular

bottom could jeopardise the

efficiency of the heating system

and prevent cookware from being

detected on the cooking zone.

Use

Limiting the cooking duration

The hob has an automatic device which

limits the duration of use.

If the cooking zone settings are not

changed, the maximum duration of

operation for each zone depends on the

power level selected.

When the device for limiting the duration of

use is activated, the cooking zone turns off,

a short alert sounds and, if the zone is hot,

the symbol appears on the display.

Protection from overheating

If the hob is used on full power for a long

period, the electronics will have trouble

cooling down if the room temperature is

high.

To avoid excessively high temperatures

forming in the electronics, the power to the

cooking zone is reduced automatically.

Advice on energy-saving

• The diameter of the base of the pan must

correspond to the diameter of the

cooking zone.

• When buying a pan, check whether the

diameter indicated is that of the base or

the top of the pan, as the top is almost

always larger than the base.

• When preparing dishes with long

cooking times, you can save time and

energy by using a pressure cooker,

which also makes it possible to preserve

the vitamins in the food.

• Make sure that the pressure cooker

contains enough liquid as, if there is not

enough and it overheats, this may cause

damage to both the pressure cooker and

the cooking zone.

• If possible, always cover pans with a

suitable lid.

• Choose a pan suitable for the quantity of

food to be cooked. A large, half-empty

saucepan leads to a waste of energy.

Set power level

Maximum cooking

duration in hours

1 8

3 - 4 5

6 - 7 - 8 - 9 1 ½

Under certain circumstances, if the

hob and the oven are being used

at the same time, the maximum

power limit that can be used by the

electrical system might be

exceeded.

Use

Power levels

The power in the cooking zone can be

adjusted to various levels. The table shows

the levels suitable for various types of

cooking.

* see booster function

Residual heat

If the cooking zone is still hot after being

switched off, the symbol will be

displayed on the display. The symbol clears

once the temperature drops below 60°C.

Heating accelerator

This function allows the selected power to

be achieved in the shortest amount of time.

1. Turn the knob anti-clockwise to position

A and then release it. The display shows

the symbol .

2. Select the required heating power (1 - 8)

within 3 seconds. The selected power

and symbol will flash alternately on

the display.

The power level can be increased at any

moment. The “maximum power” period will

automatically be modified.

Once the acceleration period is over the

power level will remain the same as the one

previously selected.

Power level Suitable for:

0 OFF setting

U Keep warm

1 - 2

Cooking small amounts of food

(minimum power)

3 - 4 Cooking

5 - 6

Cooking large quantities of

food, roasting larger portions

7 - 8 Roasting, slow frying with flour

9 Roasting

P *

Roasting / browning, cooking

(maximum power)

Improper use

Danger of burns

• Supervise children carefully as they

cannot easily see the residual heat

indicator. The cooking zones remain hot

for a certain period of time even after

they have been turned off. Make sure

that children never touch the hob.

Each cooking zone is equipped

with a heating accelerator that

allows the maximum power to be

delivered for a time that is

proportional to the selected

power.

If the power is reduced, by turning

the knob anti-clockwise, the

heating accelerator will

automatically be disabled.

Use

Keep warm

To activate the Keep Warm function:

• Turn the knob for the required cooking

zone until the symbol appears on

the corresponding display.

Booster function

• Turn the knob clockwise to the P position

for two seconds and then release.

The display shows the symbol . After 5

minutes the Booster function will

automatically be disabled and cooking will

continue at power level 9 (on zones 2 and

3 only).

Power control

The hob is fitted with a power control

module that optimises/limits consumption. If

the overall set power level exceeds the

maximum limit permitted, the electronic

circuit board will automatically manage the

power supplied by the hot plates.

The module tries to maintain the maximum

deliverable power levels. Levels set by the

automatic control will appear on the

display.

The flashing of a power level indicates that

it will be automatically limited to a new level

selected by the power control module.

The Keep warm function allows

you to keep cooked food hot.

The booster function allows the

cooking zone to be activated at

maximum power for as long as 5

minutes. It can be used to bring a

large quantity of water to a boil

rapidly or to broil meat.

The booster function has priority

over the heating accelerator

function.

Priority is given to the last zone set.

Use

Controls lock

1. With all cooking zones off,

simultaneously turn the two cooking zone

control knobs anti-clockwise to the left

(position A).

2. Keep them turned until the symbols

appear on the display.

3. Release the knobs.

In order to remove the control lock repeat

the same operations described previously.

Error codes

If the display shows one of the following

error codes , , contact Technical

Assistance.

3.5 Using the storage compartment

There is a storage compartment located at

the bottom of the cooker; this can be used

to store pans or metal objects required to

use the cooker.

Press lightly on the sides of the door to open it.

3.6 Using the oven

Switching on the oven

To switch on the oven:

1. Select manual cooking or set the

cooking duration using the timer knob.

Adjustment is progressive so that the time

can also be set to any intermediate value

between these numbers.

2. Select the cooking function using the

function knob.

3. Select the temperature using the

temperature knob.

The controls lock is a device that

protects the appliance from

accidental or inappropriate use.

If the knobs have been kept turned

to the A position for more than 30

seconds a fault message appears

on the display.

After a prolonged period of

interruption to the power supply,

the control lock will be

deactivated. If this is the case, turn

it back on as described above.

If no cooking time is selected, the

timer knob must be positioned on

the symbol (manual).

Use

Preheating stage

Cooking functions are always preceded by

a preheating stage, which allows the

appliance to heat up to cooking

temperature.

The indicator light comes on to indicate that

the oven is heating up.

The indicator light turns off to indicate that

the food can be placed inside the oven and

cooking will start automatically.

Functions list

Convection

As the heat comes from above and

below at the same time, this system

is particularly suitable for certain

types of food. Traditional cooking,

also known as convection cooking,

is suitable for cooking just one dish

at a time. Perfect for all types of

roasts, bread and cakes, and in any

case, particularly suitable for fatty

meats such as goose and duck.

Baker’s function

The combination of the fan with just

the lower heating element allows

cooking to be completed more

rapidly. This system is

recommended for sterilising or for

finishing off the cooking of foods

which are already well-cooked on

the surface, but not inside, which

therefore need a little more heat.

Perfect for any type of food.

Small grill

Using only the heat released from

the central element, this function

allows you to grill small portions of

meat and fish for making kebabs,

toasted sandwiches and any types

of grilled vegetable side dishes.

Grill

The heat coming from the grill

element gives perfect grilling results

above all for thin and medium

thickness meat and, in combination

with the rotisserie (where fitted),

gives the food an even browning at

the end of cooking. Perfect for

sausages, spare ribs and bacon.

This function enables large

quantities of food, particularly meat,

to be grilled evenly.

Fan grill

The air produced by the fan softens

the strong heatwave generated by

the grill, grilling perfectly even very

thick foods. Perfect for large cuts of

meat (e.g. pork hock).

Fan assisted

The operation of the fan, combined

with traditional cooking, ensures

consistent cooking even with

complex recipes. Perfect for biscuits

and cakes, even when

simultaneously cooked on several

levels. (For multiple-level cooking,

we recommend using the 2

and

shelf).

Use

3.7 Cooking advice

General advice

• Use a fan assisted function to achieve

consistent cooking at several levels.

• It is not possible to shorten cooking times

by increasing the temperature (the food

could be overcooked on the outside and

undercooked on the inside).

Advice for cooking meat

• Cooking times vary according to the

thickness and quality of the food and to

consumer taste.

• Use a meat thermometer when roasting

meat, or simply press on the roast with a

spoon. If it is hard, it is ready; if not, it

needs another few minutes cooking.

Advice for cooking with the Grill and the

Fan grill

• Meat can be grilled even when it is put

into the cold oven or into the preheated

oven if you wish to change the effect of

the cooking.

• With the Fan grill function, we

recommend that you preheat the oven

before grilling.

• We recommend placing the food at the

centre of the rack.

Fan forced

The combination of the fan and the

circular heating element

(incorporated in the rear of the

oven) allows you to cook different

foods on several levels, as long as

they need the same temperatures

and same type of cooking. Hot air

circulation ensures instant and even

distribution of heat. It will be

possible, for instance, to cook fish,

vegetables and biscuits

simultaneously (on different levels)

without odours and flavours

mingling.

Eco

This function is particularly suitable

for cooking on a single shelf with

low energy consumption.

Ideal for cooking meat, fish and

vegetables. It is not recommended

for leavened foods.

To obtain maximum energy savings

and reduce cooking times, it is

recommended to place food in the

oven without preheating.

When using the ECO function,

avoid opening the door during

cooking.

Cooking (and preheating) times

are longer with the ECO function.

Vapour Clean

This function makes cleaning easier

using the steam produced by a

small quantity of water poured onto

the appropriate groove placed on

the bottom.

Use

• With the Grill function, we recommend

that you turn the temperature knob to the

maximum value near the symbol to

optimise cooking.

• Foods should be seasoned before

cooking. Foods should also be coated

with oil or melted butter before cooking.

• Use the oven tray on the first bottom shelf

to collect fluids produced by grilling.

• Grilling processes should never last more

than 60 minutes.

Advice for cooking desserts/pastries and

biscuits

• Use dark metal moulds: they help to

absorb the heat better.

• The temperature and the cooking time

depend on the quality and consistency

of the dough.

• To check whether the dessert is cooked

right through: at the end of the cooking

time, put a toothpick into the highest point

of the dessert. If the dough does not stick

to the toothpick, the dessert is cooked.

• If the dessert collapses when it comes

out of the oven, on the next occasion

reduce the set temperature by about

10°C, selecting a longer cooking time if

necessary.

• While cooking desserts or vegetables,

excessive condensation may form on the

glass. In order to avoid this, open the

door very carefully a couple of times

while cooking.

Advice for defrosting and proving

• Place frozen foods without their

packaging in a lidless container on the

first shelf of the oven.

• Avoid overlapping the food.

• To defrost meat, use the rack placed on

the second level and a tray on the first

level. In this way, the liquid from the

defrosting food drains away from the

food.

• The most delicate parts can be covered

with aluminium foil.

• For successful proving, a container of

water should be placed in the bottom of

the oven.

To save energy

• Stop cooking a few minutes before the

time normally used. Cooking will

continue for the remaining minutes with

the heat which has accumulated inside

the oven.

• Reduce any opening of the door to a

minimum to avoid heat dispersal.

• Keep the inside of the appliance clean

at all times.

Use

3.8 Programmer clock

Value decrease key

Clock key

Value increase key

Setting the time

On the first use, or after a power failure, the

digits will be flashing on the

appliance’s display.

1. Hold down the clock key for two

seconds. The dot between the hours and

the minutes flashes.

2. The time can be set via the value

increase key and value decrease

key . Keep the key pressed in to

increase or decrease rapidly.

3. Wait 7 seconds. The dot between the

hours and the minutes stops flashing.

4. The symbol on the display indicates

that the appliance is ready to start

cooking.

Ensure that the programmer clock

shows the cooking duration

symbol , otherwise it will not

be possible to turn on the oven.

Press the key to reset the

programmer clock.

If the time is not set, the oven will

not switch on.

To change the time, hold down the

value increase key and value

decrease key at the same time

for two seconds, then set the time.

Page is loading ...

Smeg CS9IMXA User manual

Brand: Smeg

Model: CS9IMXA

Category: Hobs

Type: User manual

Download PDF

report

Smeg CS9IMXA User manual

Smeg CS9IMXA User manual

Related papers

Other documents