Winslet
Drill
1
2
3
RECOMMENDED
TOOLS AND MATERIALS
Flathead Screwdriver,
Phillips Screwdriver
Allen Wrench
Tape Measure
All specifications subject to change without
prior notice.
Affix your mounting hardware to the wall using your
mounting screws. For walls with brick or other types
of masonry we suggest using nylon plugs. For cavity
walls we suggest using toggle anchors if you are unable
to screw into studs.
Measure and mark holes as listed in the above table.
Drill screw mounting holes usin
g a B size drill bit (0.238).
IMPORTANT: Ensure that the holes you have drilled for
installation are level.
513TB-18 18” Towel bar
513TB-24 24
” Towel bar
513TR Towel ring
513RH Robe hook
513TP Toilet paper holder
513TB-18 & 513TB-24
Feature Highlights
▪ Metal construction
▪ Standard finish is polished chrome
Finish Options
Append appropriate-suffix to model number
▪ STN Satin Nickel
▪ ORB Oil Rubbed Bronze
Warranty
▪ Limited Lifetime - to the original end purchaser
in residential/consumer installations
▪ 5 years - for commercial installations
513TB-18
18
MODEL NO.
LENGTH X=inch
513TB-24
24
After securing your mounting hardware to the wall, place
the mounting end of your accessory onto the mounting
hardware as is shown in the picture above. Affix your
accessory to the mounting hardware using the Allen
wrench provided with the product.
513RH513TR 513TP
X
MEASUREMENT
BEFORE INSTALLATION
use B size
Drill (0.238)
Accessory Installation Instructions
TM
For California Residents
WARNING: This product contains chemicals known to
the State of California to cause cancer, birth defects, or
other reproductive harm.