Winslet
Drill
1
2
3
RECOMMENDED
TOOLS AND MATERIALS
Flathead Screwdriver,
Phillips Screwdriver
Allen Wrench
Tape Measure
All specifications subject to change without
prior notice.
Affix your mounting hardware to the wall using your
mounting screws. For walls with brick or other types
of masonry we suggest using nylon plugs. For cavity
walls we suggest using toggle anchors if you are unable
to screw into studs.
Measure and mark holes as listed in the above table.
Drill screw mounting holes usin
g a B size drill bit (0.238).
IMPORTANT: Ensure that the holes you have drilled for
installation are level.
513TB-18 18” Towel bar
513TB-24 24
” Towel bar
513TR Towel ring
513RH Robe hook
513TP Toilet paper holder
513TB-18 & 513TB-24
Feature Highlights
▪ Metal construction
▪ Standard finish is polished chrome
Finish Options
Append appropriate-suffix to model number
▪ STN Satin Nickel
▪ ORB Oil Rubbed Bronze
Warranty
▪ Limited Lifetime - to the original end purchaser
in residential/consumer installations
▪ 5 years - for commercial installations
513TB-18
18
MODEL NO.
LENGTH X=inch
513TB-24
24
After securing your mounting hardware to the wall, place
the mounting end of your accessory onto the mounting
hardware as is shown in the picture above. Affix your
accessory to the mounting hardware using the Allen
wrench provided with the product.
513RH513TR 513TP
X
MEASUREMENT
BEFORE INSTALLATION
use B size
Drill (0.238)
Accessory Installation Instructions
TM
For California Residents
WARNING: This product contains chemicals known to
the State of California to cause cancer, birth defects, or
other reproductive harm.
To ensure that your Symmons product will continue to look as beautiful as the day it was installed,
please follow these simple cleaning instructions.
1. To clean the finish on your Symmons product, rinse with clean water, wipe with a soft damp cloth
and blot dry with a soft cotton cloth or towel.
2. If heavy cleaning is required start by cleaning as described in Step 1. Use a mild liquid soap or liquid
glass cleaner to remove any remaining surface buildup. Rinse product with clean water to remove any
remaining cleaning solution and blot dry with a soft cotton cloth or towel.
Do not use cleaning products containing abrasives, acids, alcohol, bleach or foaming compounds. If any
unintentional splashing or overspray of these types of cleaning products comes in contact with your
Symmons product, immediately rinse it with clean water and blot dry with a clean soft cotton cloth or
towel.
IMPORTANT CLEANING INSTRUCTIONS
ACCESSORIES INSTRUCTIONS
DIMENSIONS
513TB-18
20-1/2”
(521 mm)
2-1/2”
(64 mm)
3-3/4”
(95 mm)
513TB-24
26-1/2”
(673 mm)
2-1/2”
(64 mm)
3-3/4”
(95 mm)
2-7/8”
(73 mm)
2-3/4
”
(70 mm)
2-1/2”
(64 mm)
6-1/4”
(159 mm)
2-1/2”
(64 mm)
7-3/8
”
(186 mm)
2-1/2”
(64 mm)
7”
(177 mm)
2-1/2”
(64 mm)
3-3/4”
(95 mm)
513TR
513TP
513RH
Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184
Phone: (800)796-6667 Fax: (800)961-9621 www.symmons.com [email protected]
Copyright 2016 Symmons Industries, Inc. ZV-3000 REV A 01062016
■■
■ ■
■ ■
©
■
-
1
-
2
Symmons 513TR Installation guide
- Category
- Wall & ceiling mounts accessories
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Symmons 513RH-ORB Installation guide
-
Symmons 353DTB-24-STN Installation guide
-
Symmons 513TB-24-STN Installation guide
-
Symmons 35AC3BUNDLEMB Installation guide
-
-
-
-
Symmons 413TB-18 Installation guide
-
Symmons Industries 673TP-STN Installation guide
-