Dynex DX-32E150A11 Quick setup guide
- Category
- LCD TVs
- Type
- Quick setup guide
Dynex DX-32E150A11 is a 32" TV that boasts a variety of capabilities to enhance your viewing experience. It supports connecting multiple devices, including DVD or Blu-ray players, cable boxes, satellite receivers, game stations, and computers, through HDMI or component connections. The TV also allows you to connect your headphones for private listening. Additionally, you can connect a digital audio amplifier to enjoy high-quality sound. The DX-32E150A11 comes with a remote control for easy navigation and control of the TV's settings and channels.
Dynex DX-32E150A11 is a 32" TV that boasts a variety of capabilities to enhance your viewing experience. It supports connecting multiple devices, including DVD or Blu-ray players, cable boxes, satellite receivers, game stations, and computers, through HDMI or component connections. The TV also allows you to connect your headphones for private listening. Additionally, you can connect a digital audio amplifier to enjoy high-quality sound. The DX-32E150A11 comes with a remote control for easy navigation and control of the TV's settings and channels.
Connecting a DVD or Blu-ray DVD player, cable
box, satellite receiver or game station
Using HDMI (best)
Using component (better)
Note: Cable connectors and jacks are often color-coded. Match the colors when
you connect the AV cable.
Connecting an antenna
Connect a 75 ohm cable (not included) to the ANT/CABLE IN jack on the back of
your TV and the RF OUT jack on the antenna.
Connecting a VCR, camcorder, or game
(good)
Note: Cable connectors and jacks are often color-coded, however this TV is
slightly dierent. Match the colors of the Audio L/R cables to the red and white
jacks on the TV and the audio source, but connect the video cable (with the
yellow connector) to the green “Y” jack on the TV and to the yellow VIDEO OUT
jack on the video source.
Connecting to a computer
Connecting headphones
Connecting a digital audio amplier
Connecting power
Connect the power cable to a power outlet.
Setting up your remote control
1 While pressing the release button on the
battery compartment cover on the back
of the remote, lift the cover o the remote.
2 Insert two AAA batteries into the battery
compartment. Make sure that the + and -
symbols on the batteries align with the
+ and – symbols in the battery compartment.
3 Replace the cover.
Front features
Installing the stand
1 Remove the stand, stand column, and screws from the box.
2 Align the holes in the stand with the holes on the stand column, then secure the
stand to the column with the longer screws (M4) provided.
3 Lay a soft, dry, and lint-free cloth on a table and place the TV face down on the
cloth. Insert the stand column into the TV and secure it with the four stand
column screws (M6).
Important: The wide portion of the stand should go towards the front of the TV.
To remove the stand from the TV, perform these steps in reverse order.
Installing a wall-mount bracket
If you want to attach the TV to a wall-mount bracket (not provided), you should rst
remove the stand pedestal if it is pre-attached.
To remove the stand column:
1 Lay your TV face down on a table or bench. Make sure that you put down a soft
cushion or cloth so that your TV is not scratched.
2 Remove the four screws holding the stand column to your TV, then remove the
stand and the stand column.
To attach your TV to a wall-mount bracket:
1 Remove the three screws holding the TV to its base, as previously described.
2 Secure the wall-mount bracket to the back of your TV using the fourM6 screws
provided with the bracket.
32" LED-LCD TV
QUICK SETUP GUIDE
DX-32E150A11
Remote control
and
2 AAA batteries
Composite cable
Quick Setup Guide
WE ARE GOING GREEN!
A copy of the manual is not provided in the box
but is available at www.dynexproducts.com
Click Service & Support, enter your model number in
the Product Search eld, then click Search.
AC power cord
Remote control
sensor
Power indicator
Volume
+/-
Menu
Channel
+/-
Power button
Input
Side of TV
Power cord
Power outlet
Back of TV
RGB (VGA) cable
Computer
Audio cable (stereo mini plugs)
Back of TV
75-Ohm coaxial cable
Antenna, cable TV,
or satellite RF jack
Back of TV
Component video device
Component
video cable
Audio cable
Back of TV
HDMI cable
HDMI device
Side of TV
Back of TV
Optical audio cable
TV stand and 8 screws
(M4 screws: 4, M6 screws: 4)
Composite
cable
Back of camcorder
or game
Back of TV
Back of VCR
LINE
OUT
Shorter (M6) screws
THIS SIDE FRONT
Cloth or padding
THIS SIDE FRONT
Narrower portion
of the stand
Wider portion
of the stand
Screws holes
Longer (M4)
screws
To program your existing remote control to work with your Dynex TV, see the
table below for common codes. If you have problems programming your
remote, or need a dierent remote control code, visit www.dynexproducts.com
for the latest remote control code information.
Click Service & Support, select Find my remote control code, enter model number
in the Product Search Field, then click Search. Remote control codes are near the
bottom of the page.
Turning on your TV for the rst time
1 Plug in your TV and turn it on. The initial Setup Wizard opens.
2 Press or to select the menu language you want, then press ENTER.
The Time screen opens.
3 Press or to highlight Mode, then press or to select Manual (to set
the date and time manually), or Auto (the date and time are automatically set
by the TV signal source, based on the time zone you select).
4 Press or to highlight Time Zone, then press or to select your time
zone. You can select Pacic, Alaska, Hawaii, Newfoundland, Atlantic,
Eastern, Central, or Mountain.
5 If your viewing area observes daylight savings time, press or to highlight
Daylight Savings, then press or to select On.
6 If you selected Manual mode, make the settings as follows:
• Press or to highlight Year, Month, or Day, then press or
to adjust the setting.
• Set the time by pressing or
to highlight Date/Time, then press or
to highlight the hour, minute, or AM/PM eld. Press or to adjust the
setting.
7 Press ENTER. The Choose your Picture Mode screen opens.
8 Press or to select Home Mode or Retail Mode, then press ENTER.
If you select Home Mode, the Choose your TV source screen opens.
-OR-
If you select Retail Mode, a message stating “Are you sure you want Retail
mode? Since in this mode Energy saving is not realized.” appears. Select Yes to
proceed or No to exit.
9 Press or to select Antenna, Cable, or Cable/Satellite Box, depending on
the type of connection you have.
• If you are using an antenna for a standard or HD TV signal, select Antenna.
• If your cable is connected directly to the TV (without a tuner box), select
Cable.
• If your cable is connected to your TV through a tuner box, select
Cable/Satellite Box.
10 Press Enter when you have made your selection. The channel scan screen opens.
If you selected Antenna or Cable, your TV automatically scans for available
channels in your area and stores the channel information in the channel list.
This may take several minutes. While scanning, the TV displays a progress
report.
– OR –
If you selected Cable/Satellite Box, the auto scan is not necessary and the
screen will ask you to select the correct input source for your set top box.
Press EXIT to close the menu.
11 Select the corresponding video input source through the INPUT SOURCE menu.
Selecting the video input source
1 Turn on your TV, then press the INPUT key on the remote, or the INPUT button
on the TV. The Source List menu opens.
2 Press or to highlight the video source, then press ENTER. You can also
press any of the video source buttons directly.
Adjusting the volume
• Press VOL+ or VOL- to change the volume.
• Press MUTE to turn o the sound.
Selecting a channel
• To move to a dierent channel in the channel list, press CH^ or CH
^
.
OR
• Enter the channel number directly using the number buttons.
Viewing channel information
• Press INFO to view an information banner.
The information banner shows the current
program information such as channel
number, video input source, and resolution.
• Digital mode information—Displays
program name, time, channel number,
audio information, channel label, TV rating,
resolution, and current signal strength.
• Analog mode information—Displays
channel number, channel label (if preset),
signal type, audio information, resolution,
and current signal strength.
• Press GUIDE to show the digital program guide, which may view a list of
available programs, program times, and program summaries, depending on the
information provided by the broadcaster.
On-screen menu overview
PICTURE menu
AUDIO menu
CHANNELS menu
SETTINGS menu
Navigating menus with your remote control
09-0xxx
One-year limited warranty
Visit www.dynexproducts.com for details.
Need additional help?
See your User Guide! This comprehensive guide includes
everything from basic how-to steps to more advanced
features. Go to www.dynexproducts.com, click Service &
Support, enter your model number in the Product Search
eld, then click Search.
We’re here for you
www.dynexproducts.com
For customer service, call:
800-305-2204 (U.S./Canada markets)
01 800-926-3020 (Mexico market)
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richeld, MN USA 55423-3645
Best Buy Imports, S. de R.L. de C.V. Av. Santa Fe 485, Segundo Piso,
Colonia Cruz Manca, Programa Parcial de Desarrollo Santa Fe,
Delegación Cuajimalpa, Distrito Federal, México 05349
RFC#BBI0802114Q2
© 2010 BBY Solutions, Inc., All Rights Reserved.
DYNEX is a trademark of BBY Solutions, Inc. Registered in some
countries. All other products and brand names are trademarks of their
respective owners.
ENGLISH 10-1326
32" LED-LCD TV I QUICK SETUP GUIDE I DX-32E150A11
Press to change
the volume.
Press to change
the channel.
Press to conrm your
selection or enter a
sub-menu.
Press to select the
menu items.
Press to display
the main menu.
Press to return to
the previous screen.
Press to select menu items,
to adjust selected items, or
to move the on-screen
cursor left or right.
Press to close
the menu.
PICTURE AUDIO CHANNELS SETTINGS
Mode
Advanced Video
Sharpness
Tint
Color
Contrast
Brightness
Energy Savings
6
0
70
57
48
PICTURE AUDIO CHANNELS SETTINGS
Sound Mode
Audio Language
MTS/SAP
Surround
Balance
Bass
Treble
0
40
50
Standard
On
STEREO
English
Digital Audio/SPDIF PCM
PICTURE AUDIO CHANNELS SETTINGS
Auto Channel Search
Channel Strength
Auto Zoom
Audio Only
Channel Labels
Favorites
Add/Skip Channels
O
On
WGBH-SD
PICTURE AUDIO CHANNELS SETTINGS
Parental Controls
Reset to Default
Computer Settings
Input Labels
Closed Caption
Time
Language
English
Choose your menu Language
Español
Français
English
Setup Wizard
Auto
Setup Wizard
Mode
Date/Time
Day
Month
Year
Daylight Savings
cificaPenoZ emiT
12 : 07 AM
13
Jan
2000
Time
Choose your Picture Mode
Retail Mode
Home Mode
Setup Wizard
Setup Wizard
Choose your TV source
Cable/Satellite Box
Cable
Antenna
Analog Channels
Digital Channels
0
0
Philips
PHDVD5, PH5DSS,
PMDVR8, PDVR8
115
DirectTV
RC23
10463
RCA
RCU807
135
One for All
URC-6690
0464
Sony
RM-VL600
8043
Comcast
M1057
0463
Dish Network
VIP508, VIP622
720
Motorola
DRC800
0463
TIVO
Series 3, HD
0091
Universal remote control makers and models Set-top box makers and models
Universal remote control TV codes (for all Dynex TVs manufactured after Jan. 1, 2007)
-
1
-
2
Dynex DX-32E150A11 Quick setup guide
- Category
- LCD TVs
- Type
- Quick setup guide
Dynex DX-32E150A11 is a 32" TV that boasts a variety of capabilities to enhance your viewing experience. It supports connecting multiple devices, including DVD or Blu-ray players, cable boxes, satellite receivers, game stations, and computers, through HDMI or component connections. The TV also allows you to connect your headphones for private listening. Additionally, you can connect a digital audio amplifier to enjoy high-quality sound. The DX-32E150A11 comes with a remote control for easy navigation and control of the TV's settings and channels.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Dynex DX-24E150A11 User manual
-
Dynex DX-46L262A12 User manual
-
-
-
-
-
-
-
-
Dynex DX-26L100A13 Quick setup guide