Renishaw MCU docking plate Installation guide

Renishaw
Brand
Renishaw
Model
MCU docking plate
Category
Mounting kits
Type
Installation guide

Renishaw MCU docking plate

The Renishaw MCU docking plate is a device designed to provide a secure and stable mounting solution for the MCU (Measurement Control Unit). It offers several key capabilities and use cases:

  1. Secure Docking: The docking plate features a robust design with docking arms that firmly hold the MCU in place, preventing it from falling out due to gravity or external forces. This ensures the safety and stability of the MCU during use and storage.

  2. Mounting Flexibility: The docking plate provides multiple mounting options, including adhesive, Velcro, or screws. This versatility allows users to attach the plate to various surfaces, such as walls, tables, or equipment, enabling them to position the MCU conveniently for optimal operation.

Renishaw MCU docking plate

The Renishaw MCU docking plate is a device designed to provide a secure and stable mounting solution for the MCU (Measurement Control Unit). It offers several key capabilities and use cases:

  1. Secure Docking: The docking plate features a robust design with docking arms that firmly hold the MCU in place, preventing it from falling out due to gravity or external forces. This ensures the safety and stability of the MCU during use and storage.

  2. Mounting Flexibility: The docking plate provides multiple mounting options, including adhesive, Velcro, or screws. This versatility allows users to attach the plate to various surfaces, such as walls, tables, or equipment, enabling them to position the MCU conveniently for optimal operation.

Installation leaet
H-1000-5239-03-A
MCU docking plate
© 2003 - 2020 Renishaw plc. All rights reserved.
This document may not be copied or reproduced in whole or in part, or
transferred to any other media or language, by any means, without the
prior written permission of Renishaw.
The publication of material within this document does not imply
freedom from the patent rights of Renishaw plc.
Disclaimer
RENISHAW HAS MADE CONSIDERABLE EFFORTS TO ENSURE
THE CONTENT OF THIS DOCUMENT IS CORRECT AT THE
DATE OF PUBLICATION BUT MAKES NO WARRANTIES OR
REPRESENTATIONS REGARDING THE CONTENT. RENISHAW
EXCLUDES LIABILITY, HOWSOEVER ARISING, FOR ANY
INACCURACIES IN THIS DOCUMENT.
Trademarks
RENISHAW, the probe symbol used in the RENISHAW logo and
REVO are registered trademarks of Renishaw plc in the United
Kingdom and other countries. apply innovation and names and
designations of other Renishaw products and technologies are
trademarks of Renishaw plc or its subsidiaries.
All brand names and product names used in this document are trade
names, service marks, trademarks, or registered trademarks of their
respective owners.
All trademarks and trade names are acknowledged.
Renishaw part no: H-1000-5239-03-A
Issued: 10.2020
MCU docking port
The recommended procedure to construct the MCU docking station is as detailed
below:
1. Remove the MCU docking port components from their transit packaging.
2. Screw the docking arms (1) onto the threaded studs located on the MCU docking
plate (2) and hand tighten.
3. Secure to the surface by an appropriate method; adhesive, Velcro, screws etc.
Mounting holes (3) are provided to assist this process.
4. If required two extra docking arms are supplied in order to use the MCU docking
port at an angle. These are attached by screwing two M6 × 12 mm screws (4)
(supplied) through the top two mounting holes (3).
5. Locate the docking port onto the required surface ensuring that the plate is
positioned in a way that the MCU does not fall out of its holding position due to
gravity.
1 - MCU docking arms
2 - MCU docking plate
3 - Mounting holes
4 - M6 × 12 mm screws
3
2
1
MCU docking port
4
1
4
1
3
Renishaw plc
New Mills, Wotton-under-Edge,
Gloucestershire, GL12 8JR
United Kingdom
T +44 (0)1453 524524
F +44 (0)1453 524901
E uk@renishaw.com
www.renishaw.com
For worldwide contact details,
please visit our main website at
www.renishaw.com/contact
*H-1000-5239-03*
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Renishaw MCU docking plate Installation guide

Renishaw
Brand
Renishaw
Model
MCU docking plate
Category
Mounting kits
Type
Installation guide

Renishaw MCU docking plate

The Renishaw MCU docking plate is a device designed to provide a secure and stable mounting solution for the MCU (Measurement Control Unit). It offers several key capabilities and use cases:

  1. Secure Docking: The docking plate features a robust design with docking arms that firmly hold the MCU in place, preventing it from falling out due to gravity or external forces. This ensures the safety and stability of the MCU during use and storage.

  2. Mounting Flexibility: The docking plate provides multiple mounting options, including adhesive, Velcro, or screws. This versatility allows users to attach the plate to various surfaces, such as walls, tables, or equipment, enabling them to position the MCU conveniently for optimal operation.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers