2. Better Music Builder
  3. A-1600

Better Music Builder A-1600 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Better Music Builder A-1600 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Thank you for purchasing this unit. To
make full and effective use of this unit,
please read this Owner's Manual
carefully before operating it. Please
retain this manual for future reference.
w w w.BetterMusicBuilder.com
OWNER'S MANUAL
Better Music Builder
®
is a leader in the Audio and
Karaoke equipment industry. We are committed to
offering you high quality audio products. Unlike any others
brand, we deliver the best cost and value to you directly.
For the latest update information including operation
manuals, installation instructions, hook-up diagram and
other new technologies updates etc. please visit us at our
website www.Bet terMusicBuilder.com.
DYNAMIC FUSION AMPLIFIER
A-1600
A-1800
Better Music Builder .com
®
110421
It’s what we do!
Passionate about Music
PRO Power Amp
A SERIES
2-CHANNEL POWER AMPLIFIER A-1800
POWER
DC
DDT
TM
TEMP
SIGNAL
ACTIVE
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CH A N NEL-1
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CH A N NEL-2
2-CHANNEL POWER AMPLIFIER A-1600
POWER
DC
DDT
TM
TEMP
SIGNAL
ACTIVE
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CH A N NEL-1
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CH A N NEL-2
2
CONTENTS
INTRODUCTION................................................................................................................................................ 3
SYSTEM FEATURES
............................................................................................................................................ 3
SAFETY INSTRUCTIONS
.............................................................................................................................. 4~5
SPEAKER CONNECTION METHODS AND INFORMATION
.................................................................... 6
SYSTEM APPLICATIONS
................................................................................................................................... 7
• Connecting the Whole System for Small Format
......................................................................................... 7
• Connecting the Whole System for Medium Format
................................................................................... 8
• Connecting the Whole System for Large Format
......................................................................................... 9
• Small Format
........................................................................................................................................................... 10
• Medium Format
...................................................................................................................................................... 11
• Large Format
........................................................................................................................................................... 12
CONTROLS AND FUNCTIONS
..................................................................................................................... 13
• Front Panel
................................................................................................................................................................ 13
• Rear Panel
................................................................................................................................................................ 13
OPERATION
...................................................................................................................................................... 14
PHYSICAL DIMENSIONS
............................................................................................................................... 15
SPECIFICATIONS
.............................................................................................................................................. 16
TROUBLESHOOTING
................................................................................................................................ 17~18
WARRANTY
...................................................................................................................................................... 19
AGENCY REGULATORY NOTICES
............................................................................................................... 20
FINAL WORDS TO USER
................................................................................................................................ 21
CONTACT INFORMATION
............................................................................................................................ 21
Intro
Features
Safety
Connection
Amplifier
Applications
Contact Us
Troubleshooting
Warranty
Final Words
Notices
Spec
Dimensions
Operating
3
INTRODUCTION
Better Music Builder the new A Series power amplifier in two
models: A-1600 and A-1800 provides excellent performance
and impressive power for all the speakers. Both of the
A-1600 and A-1800 are a 2-Channel power amplifier. This
2-Channel power amplifier is one of the most powerful and
innovative amplifiers on the market today. If you’re really
looking for something to bring life to your party, bring this
along and you’ll have a blast!
The A-1600/A-1800 power amplifier is designed by the best
minds here in Better Music Builder to make this the most
efficient, most durable, and of course the best designed
power amplifier ever. They feature Better Music Builder’s
latest Auto Temperature and Loads Compensated Impedance
and DDT™ (Distortion Detection Technique) circuitry for
clean, undistorted sound with the ultimate circuit protection
needed by amps which often get pushed to the limit. DDT
protects drivers and ensures that sonic integrity is maintained,
even in extreme overload conditions. And to officially make
this the most portable amplifier, we’ve included front handles
so you can lug the machine with ease.
Considering how much power the A-1600/A-1800 can
bring, it needs a sophisticated cooling system. That’s where
the patented Turbo-Cooling System from Better Music Builder
comes in. Using the new technology, the system aligns the
amplifier’s massive heat sinks to provide maximum cooling.
Also, the fan speed is programmed to vary automatically
based on temperature. What all this means is that the system
extends the life of power transistors by maintaining safe
internal temperatures.
Better Music Builder is simply the best solution for home and
professional karaoke performance!
Intro
SYSTEM FEATURES
PROFESSIONAL POWER AMPLIFIER
A Series is equipped with the following
distinguished features:
Models: A-1600
A-1800
• 2-Channel power amplifier
• Sleek aluminum chassis
• Signal level indicator for each channel
• DDT™ (Distortion Detection Technique) Protection
• Power overload protection
• Sophisticated Turbo-Cooling System helps extend life
• Variable fan speed is automatically adjusted by
temperature
• Anti-dust ventilation grill
• Front handles for portability
• Signal Inputs: 2 XLR and 1/4” combo inputs
• Signal Outputs: 2 XLR audio outputs
• Speaker Outputs: 2 dual-banana audio outputs &
2 speakon outputs
• Rear panel selection switch for Stereo, Parallel and Bridged
modes, including Sensitivity, Bass Boost switches
Features
A-1600/A-1800 PACKAGE CONTENTS:
• Power Amplifier: 1 pc
• Instructional Manual: 1 pc
• Warranty & Registration Card: 1 pc
A-1600/A-1800 Front View
A-1600/A-1800 Rear View
POW ER
DC
DDT
TM
TEMP
SIGN AL
ACTI VE
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CHA NNEL -1
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CHA NNEL -2
2-C HA NNEL POWE R AMPL IFI ER
SPE AKE R OU TPUT TERM INAL
FUS E: T12A L
/
250V
BRIDGESTEREO
PARALLEL
SIG NAL INPU T/OUTP UT T ERMI NAL
CH-1BRIDG E
CHA NNEL -1
CH- 2
CHA NNEL -2
SPEAKON
CH-1 OU T
PIN1+=
PIN1–=
CH-2 O UT
PIN1+=
PIN1–=
BRIDGE
PIN1+=
PIN2+=
AC-P OWER
AC 120V 60 Hz
CALIFORNIA, UNITED STATES OF AMERICA
E-m ail : s ale s@be tte rmu sic bui lde r.c om
w ww . B e tt e r M us i c B ui l d e r. c o m
ENGIN EERED AND DESIG N IN U.S.A .
MODE
1.5V0.75V
1.0V
SENSI TIVIT Y
OFFON
BASS BOOST
CAUTION:
TURN OFF AMPLIFIER BEFO RE
CHANGING THESE SWI TCHS
CHA NNEL -1
LINK/O UT
INPUT
CHA NNEL -2
LINK/O UT
INPUT
L
O
C
K
L
O
C
K
CAUT ION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WITHOUT AUTHORIZATION
4
SAFETY INSTRUCTIONS
Please visit our website at BetterMusicBuilder.com for the most
updated information, corrections on errors and changes in this
manual. You may also contact us at toll free at
1-800-318-2218.
1. Read Instructions: All the safety and operation instructions
should be read before this product is operated.
2. Retain Instructions: The safety and operating instructions
should be kept for future reference.
3. Warnings: All warnings on this product in these operating
instructions should be followed.
4. Follow Instructions: All operating and other instructions
should be followed carefully.
5. Water and Moisture: This product should not be used near
water, for example, near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, near a swimming pool,
swamp or salivating St. Bernard dog, etc.
6. Cleaning: Clean only with a dry cloth.
7. Ventilation: This product should be situated so that its
location or position does not interfere with its proper
ventilation. For example, the Component should not be
placed on a bed, sofa, rug, or similar surface that may block
any ventilation openings, or placed in a built-in installation
such as a bookcase or cabinet that may impede the flow of
air through ventilation openings.
8. Heat: This product should be stayed away from heat
sources such as radiators, or other devices producing heat.
9. Power Sources: This product should be connected to a
power supply only of the type described in these operation
instructions or as marked on this product.
10. Power Cord Protection: Power supply cords should be
routed so that they are not likely to be walked upon or
pinched by items placed upon or against them. Please pay
particular attention to cords plugs, convenience receptacles,
and the point where they exit this product.
11. Object and Liquid Entry: Care should be taken so that
objects do not fall on, or liquids are not spilled into this
product.
12. Damage Requiring Service: This product should be
serviced only by qualified service personnel when:
A. The power-supply cord or the plug has been
damaged; or
B. Objects have fallen, or liquid has spilled into this
product; or
C. This product has been exposed to rain; or
D. This product does not appear to operate normally
or exhibits a marked change in performance; or
E. This product has been dropped, or its chassis has
been damaged.
13. Servicing: The user should not attempt to service this
product beyond those means described in this operating
manual. All other servicing should be referred to the Service
Department.
14. To prevent electric shock, do not use this polarized plug
with an extension cord, receptacle or other outlet unless the
blades can be fully inserted to prevent blade exposure.
15. Grounding or Polarization: Precautions should be taken
so that the grounding or polarization means of this product is
not defeated.
16. Power Precaution: Unplug this product during lightning
storms or when unused for long periods of time. Note that
this product is not completely disconnected from the AC
power source when the power switch is in the OFF position.
17. This machine does not exceed the Class A/Class B
(whichever is applicable) limits for radio noise emissions from
digital apparatus as set out in the radio interference
regulations of the US Department of Communications.
AC-POWER SOURCES
This set should be operated only from the type of power
source indicated on the marking label. If you are not sure of
the type of electrical power supplied to your home, consult
your dealer or local power company. For those sets
designed to operate from battery power, or other sources,
refer to the operating instructions.
This unit is designed for use with 120V/60Hz AC. If the area
where you live have different power source, you may need to
use a transformer to convert to 120 Volts AC.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS
INSIDE REFER SERVICING TO QUALIFIED PERSONNEL
Safety
AC-POWER CORD INCLUDED120V AC-POWER
POWER
DC
DDT
TM
TEMP
SIGNAL
ACTIVE
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CHAN NEL-1
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CHAN NEL- 2
2-CH ANNEL P OWER AMP LIFIER A-1600
POWER
DC
DDT
TM
TEMP
SIGNAL
ACTIVE
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CHANNEL-1
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CHANNEL-2
2-CHANNEL PO WER AMP LIFIER A- 1600
POWER
DC
DDT
TM
TEMP
SIGNAL
ACTIVE
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CHAN NEL-1
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CHAN NEL- 2
2-CH ANNEL P OWER AM PLIFIER A-1600
5
OVERLOADING
Do not overload wall outlets, extension cords or convenience
receptacles beyond their capacity, since this can result in fire
or electric shock.
An appliance and cart combination
should be moved with care. Quick
stops, excessive force and uneven
surfaces may cause the appliance and
cart combination to overturn.
Do not place the electronic equipment onto the unstable
table or stand. It is because it would fall easily from the
unstable table or stand,
so it may cause
accident including
personal injuries and
damage the equipment.
Please follow our
instructions to install the
equipment, or you may
hire a professional
technician to handle the
installation for safety
purpose.
Do not place the set on an unstable cart, stand, tripod,
bracket, or table. The set may fall, causing serious injury to
a child or an adult and serious damage to the set. Use only
a cart stand tripod, bracket, or table recommended by the
manufacturer.
For the set with a three-wire grounding type ac plug:
This plug will only fit into a grounding-type power outlet.
This is a safety feature. If you are unable to insert the plug
into the outlet, contact your electrician to have a suitable
outlet installed. Do not defeat the safety purpose of the
grounding plug.
120V AC-POWER
Do not store the electronic equipment near water or area
with moisture such as bathroom, kitchen sink, laundry area
and swimming pool, etc.
Do not transport the electronic equipment by yourself if its
weight exceeds 70 pounds. It is recommended that two
people work together to transport the equipment or by using
hand truck and the like.
Do not place the electronic equipment directly under
sunlight or close to the window. It may cause overheat on
the electronic equipment by the sunlight.
Do not block the openings and vents in the cabinet which
is designed for the ventilation of the electronic equipment.
The blocking may cause overheat in the electronic equipment
because of insufficient circulation of air, so it would damage
the electronic equipment.
X
POWER
DC
DDT
TM
TEMP
SIGNAL
ACTIVE
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CHAN NEL-1
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CHAN NEL- 2
2-CH ANNEL P OWER AMP LIFIER A-1600
POWER
DC
DDT
TM
TEMP
SIGNAL
ACTIVE
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CHANNEL -1
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CHANNEL -2
2-CHANN EL POWE R AMPLIF IER A-16 00
POWER ANTENNA-A CNANNEL-A DISPLAY CNANNEL-B DISPLAY
CHANNEL-A
VOLUME
ANTENNA-B
CHANNEL-B
VOLUME
DUAL CHANNEL VHF WIR ELESS SYS TEM
RF
AF
FREQ.
5 10 15 20 25 30 35 40
-30 -25 -20 -15 -10 -5 0 PEAK
000.000
M
H
Z
MUTE
RF
AF
FREQ.
5 10 15 20 25 30 35 40
-30 -25 -20 -15 -10 -5 0 PEAK
000.000
M
H
Z
MUTE
6
SPEAKER CONNECTION METHODS AND INFORMATION
Conn ection
CONNECTOR INFORMATION
Either banana plug or wire insert type can be used to
connect the unit to speakers. Be sure to connect red (+) to red
(+) and black (–) to black (–). Otherwise, the sound output
would be 180° out of phase and distorted.
Follow these steps to insert the wire directly into the speaker
terminal.
1. Strip off the vinyl covering and twist the tip of the
wire core.
2. Loosen the knob and insert the wire core into the
terminal hole.
3. Tighten the knob to fix the wire core in place.
Do not allow the wire core to protrude or touch other
terminals or wires, otherwise, damage may occur.
METHODS OF SPEAKER CONNECTION
1. Wire Insert Type (Poor Connection)
SPEA KERS
NO GOOD
2. Double Banana Plug Type (Standard Connection)
SPEA KERS
3/4”
19 mm
3. Single Banana Plug Type (Superior Connection)
SPEA KERS
1/4” to 1/4” Cable
1
SHIELD
COLD
HOT
2
3
Balanced XLR Connectors
XLR TRS
Hot (+) Pin 2 Tip
Cold (
-
) Pin 3 Ring
Shield (Ground) Pin 1 Shield
XLR to RCA Cable
XLR to 1/4” Cable
GOOD
X
√
7
CONNECTING THE WHOLE SYSTEM FOR SMALL FORMAT
Applications
SYSTEM APPLICATIONS
Use the Classic Series speakers such as CS-250 G2
(8-inch woofer), CS-500 (10-inch woofer) and CS-612
G3 (12-inch woofer) and Oval Series speakers such
as O-6 (6-inch woofer), and O-10 (10-inch woofer) for
an area between 300 and 500 square feet.
®
CS-612 G3
CS-612 G3
DVD
DVD PLAYER
AUX 3
(MOBILE DEVICE)
AT&T 9:42AM 88%
Entertainment
Auto Priority
Wireless
HD Video
Connection
Set up
Speaker
Music
Customer Care
Mail
Vocal
Project
Wireless
Lyrics on TV
Free Resources
Stat
Group sing
Technical Support
KTV
Pro Sound
S A I S
SOURCE
VIDEO
TV
AUX 1
KOD
(KARAOKE ON DEMAND)
CD
AUX 2
(CD PLAYER)
2-CHANNEL
POWER AMPLIFIER
A-1600/A-1800
2-CHA NNEL PO WER AMP LIFIER
POWER
DC
DDT
TM
TEMP
SIGNAL
ACTIVE
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CHAN NEL-1
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CHAN NEL-2
MIXER DX-2000K
8
®
DFS-206
DFS-206
CONNECTING THE WHOLE SYSTEM FOR MEDIUM FORMAT
Use the Classic Series speakers such as CS-612 G3 or
CS-812 G3 (12-inch woofer) and Dynamic Fusion Series
speakers such as DFS-206 (one 6.5-inch woofer) and
DFS-306 (two 6.5-inch woofers) for an area between
1,000 and 2,000 square feet.
CS-812 G3
CS-812 G3
DFS-112 SUB
TOUCH SCREEN SONG SELECTOR
Pass ionat e abo ut Mu sic
2-CHANNEL
POWER AMPLIFIER
A-1800
2-CHA NNEL PO WER AMP LIFIER
A-1800
POWER
DC
DDT
TM
TEMP
SIGNAL
ACTIVE
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CHAN NEL-1
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CHAN NEL-2
SOURCE
MIXER DX-8000
MIC 2MIC 1 MIC 3
MIC. INP UT
Better Music Builder
®
Passion ate abou t M usic
IR
FEEDBACK
AUDIO VI DEO E FFECT S PRO CESSO R DX-8000
High Def initi on Li ve So und
MIC
EFFECT
MUSIC
EQ
GAIN
BACK
DELAY
LIMITER
SYSTEM
POLARIT Y
X-OVER
PROGRAM L R SL SR C SUB
EDIT
(LONG)
/MUTE
(SHORT)
/OUTPU T LE VEL
CLIP
LIMIT
0dB
-12dB
-24dB
EDIT
CLIP
LIMIT
0dB
-12dB
-24dB
EDIT
KARAOK E PRO CESSO R
PROF A UDIO
ENTER / ESC
MIC. VO LUME
MIC 1/4
MIC 2/5
MIC 3
AUX
(iPhone/iPod/
MP3 PLAYER)
AT&T 9:42AM 88%
Entertainment
Auto Priority
Wireless
HD Video
Connection
Set up
Speaker
Music
Customer Care
Mail
Vocal
Project
Wireless
Lyrics on TV
Free Resources
Stat
Group sing
Technical Support
KTV
Pro Sound
S A I S
TV
KOD
BGM
BGM PLAYER
2-CHANNEL
POWER AMPLIFIER
A-1600
2-CHA NNEL PO WER AMP LIFIER
A-1600
POWER
DC
DDT
TM
TEMP
SIGNAL
ACTIVE
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CHAN NEL-1
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CHAN NEL-2
9
CD
CD PLAYER
DVD
CD RECORDER
TV
KOD
SOURCE
GUITAR
CONNECTING THE WHOLE SYSTEM FOR LARGE FORMAT
VOCAL
DFS-206
VOCAL
DFS-206
HD VOCAL
LOUDSPEAKER
DFS-915
HD VOCAL
LOUDSPEAKER
DFS-912
HD VOCAL
LOUDSPEAKER
DFS-912
HD VOCAL
LOUDSPEAKER
DFS-915
MULTI EFFECTS MIXER
EX-8 or EX-16
WIRED MIC. 1
WIRED MIC. 2
SUBWOOFER
DFS-112 SUB
MIXER DX-8000
MIC 2MIC 1 MIC 3
MIC. INP UT
Better Music Builder
®
Passion ate abou t M usic
IR
FEEDBACK
AUDIO VI DEO E FFECT S PRO CESSO R DX-8000
High Def initi on Li ve So und
MIC
EFFECT
MUSIC
EQ
GAIN
BACK
DELAY
LIMITER
SYSTEM
POLARIT Y
X-OVER
PROGRAM L R SL SR C SUB
EDIT
(LONG)
/MUTE
(SHORT)
/OUTPU T LE VEL
CLIP
LIMIT
0dB
-12dB
-24dB
EDIT
CLIP
LIMIT
0dB
-12dB
-24dB
EDIT
KARAOK E PRO CESSO R
PROF A UDIO
ENTER / ESC
MIC. VO LUME
MIC 1/4
MIC 2/5
MIC 3
2-CHANNEL
POWER AMPLIFIER
A-1600/A-1800
2-CHA NNEL PO WER AMP LIFIER
A-1600
POWER
DC
DDT
TM
TEMP
SIGNAL
ACTIVE
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CHAN NEL-1
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CHAN NEL-2
4-CHANNEL
POWER AMPLIFIER A-4
POWER
CHANN EL 1
0dB
-3dB
-12dB
-32dB
Power
-
00
0dB
VOL
CHANN EL 2
0dB
-3dB
-12dB
-32dB
Power
-
00
0dB
VOL
CHANN EL 3
0dB
-3dB
-12dB
-32dB
Power
-
00
0dB
VOL
CHANN EL 4
0dB
-3dB
-12dB
-32dB
Power
-
00
0dB
VOL
®
®
A-4
4-CHANNEL POWER AMPL IFIER
10
SP E AKER OUTPUT T E RMINAL
FUSE: T12AL
/
250 V
BRIDGESTEREO
PARALLEL
SI G N A L INP UT/OUTPUT T E RMINAL
CH -1BR IDG E
CH A NNEL -1
CH - 2
CH A NNEL - 2
SPEAKON
CH-1 OUT
PIN1+=
PIN1–=
CH- 2 O UT
PIN1+=
PIN1–=
BRIDGE
PIN1+=
PIN2+=
AC-POWE R
AC 120V 60 Hz
MODE
1.5V0.75V
1.0V
SENSITIVI TY
OFFON
BASS BOOS T
CAUTION:
TURN OFF AMPLIFIER BEFORE
CHANGING THESE SWITCHS
CH A NNEL -1
LINK/OUT
INPUT
CH A NNEL - 2
LINK/OUT
INPUT
L
O
C
K
L
O
C
K
CAUTIO N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WITHOUT AUTHORIZATION
A-1600/A-1800 REAR VIEW
DVD
AUX 1
AUX 2
AUX 3
R LR L
OPTICAL
DIGITAL
COAXIAL
DIGITAL
AUDI O INPUT T ER MINAL
AC~110V 60Hz
AC~220V 50Hz
POWER CONSUMPTION:10W
AC-P OW ER
AUDI O OUTPUT
LR
1
2
REAR MICROPHONE IN PU T
MIC 3 MIC 4
CAU TION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WITHOUT AUTHORIZATION
110V-120V220V-240V
220V
VOLT AG E
SELE CT OR
SAFETY
MARK
USA 394898-1394536-28
MOD EL: D X- 20 00 K
CAL IFORN IA, U NITED STAT ES OF AMER ICA
E- mai l: s ale s@b ett erm usi cbu ild er.c om
w w w. B e t te r M u si c B u il d e r .c o m
ENG INEER ED AN D DES IGNED IN U .S.A.
394190306400
FUSE
T2A/250V
DX-2000K REAR VIEW
MAIN LEFT SPEAKER
GROUP A
MAIN RIGHT SPEAKER
GROUP A
This diagram gives you an idea of how to connect two
speakers to the 2-Channel power amplifier. If it’s used in a
bigger room that’s in excess of 1,000 square feet, you may
need two other speakers acting as rear speakers. When
doing so, a second 2-channel power amplifier is required.
SMALL FORMAT
WIRELESS MICROPHONE
TV
VIDEO
KOD (KARAOKE ON DEMAND)
TV
VIDEO
DVD PLAYER
XLR XLR
SP E AKER OUTPUT T E RMINAL
FUSE: T12AL
/
250 V
BRIDGESTEREO
PARALLEL
SI G N A L INP UT/OUTPUT T E RMINAL
CH -1BR IDG E
CH A NNEL -1
CH - 2
CH A NNEL - 2
SPEAKON
CH-1 OUT
PIN1+=
PIN1–=
CH- 2 O UT
PIN1+=
PIN1–=
BRIDGE
PIN1+=
PIN2+=
AC-POWE R
AC 120V 60 Hz
MODEL N O.: A- 180 0
CALIFORNIA, UNITED STATES OF AMERICA
E- mai l : sal es@ bet t er mus icb uil d er .co m
w w w . B e t t e r M u s i c B u i l d e r .c o m
ENGIN EE RE D AN D DESIGN IN U .S .A .
MODE
1.5V0.75V
1.0V
SENSITIVI TY
OFFON
BASS BOOS T
CAUTION:
TURN OFF AMPLIFIER BEFORE
CHANGING THESE SWITCHS
CH A NNEL -1
LINK/OUT
INPUT
CH A NNEL - 2
LINK/OUT
INPUT
L
O
C
K
L
O
C
K
3941903160 00
SERIAL N O.
CAUTIO N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WITHOUT AUTHORIZATION
A-1800 REAR VIEW
SP E AKER OUTPUT T E RMINAL
FUSE: T12AL
/
250 V
BRIDGESTEREO
PARALLEL
SI G N A L INP UT/OUTPUT T E RMINAL
CH -1BR IDG E
CH A NNEL -1
CH - 2
CH A NNEL - 2
SPEAKON
CH-1 OUT
PIN1+=
PIN1–=
CH- 2 O UT
PIN1+=
PIN1–=
BRIDGE
PIN1+=
PIN2+=
AC-POWE R
AC 120V 60 Hz
MODEL N O.: A- 160 0
CALIFORNIA, UNITED STATES OF AMERICA
E- mai l : sal es@ bet t er mus icb uil d er .co m
w w w . B e t t e r M u s i c B u i l d e r .c o m
ENGIN EE RE D AN D DESIGN IN U .S .A .
MODE
1.5V0.75V
1.0V
SENSITIVI TY
OFFON
BASS BOOS T
CAUTION:
TURN OFF AMPLIFIER BEFORE
CHANGING THESE SWITCHS
CH A NNEL -1
LINK/OUT
INPUT
CH A NNEL - 2
LINK/OUT
INPUT
L
O
C
K
L
O
C
K
3941903145 00
SERIAL N O.
CAUTIO N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WITHOUT AUTHORIZATION
A-1600 REAR VIEW
11
ON
AC - P OWE R
OF F
220V
110V
110 V
AC I NPU T 50/60H z
RE MOT E
1:NC
2:G ND
3:R ECEI VE
4:+5 V
1 2
3
4
GN D L E FT
VI DEO IN PUT
BG M
VO D AU X
VIDEO
OUTPUT
AUDIO I NPU T T ERMINAL
BG M
L
R
VO D AU X
R L
MI CRO P HON E I NP U T
MI C 4
2 1
3
MI C 5
2 1
3
AUDIO [ X LR] OU T PUT
MODEL: DX-8000
w ww .B et te rM us ic Bui ld er .c om
ENGINEERED AND DES IGN IN U.S.A.
384140314000
SUB C ENT ER RI GHT LE F T RIG H T LEFT
VOCAL MONITOR
BA SS GR OUP - AGR OUP - B
MEDIUM FORMAT
The medium format gives additional enhancements for
speakers requiring higher power and bass.
HD VOCAL LOUDSPEAKER DFS-912
XLR
XLR
XLR
SUBWOOFER DFS-112 SUB
WIRELESS MICROPHONE
DX-8000 REAR VIEW
HD VOCAL LOUDSPEAKER DFS-912CENTER / MONITOR DFS-306 CENTER / MONITOR DFS-306
SP E A K ER OUTPU T TERM INAL
FUSE: T12A L
/
250 V
BRIDGESTEREO
PARALLEL
SI G N AL I NPUT/OUTPU T TERM INAL
CH -1BR ID G E
CH A NNEL -1
CH - 2
CH A NNEL -2
SPEAKON
CH-1 OUT
PIN1+=
PIN1–=
CH- 2 O UT
PIN1+=
PIN1–=
BRIDGE
PIN1+=
PIN2+=
AC- PO WE R
AC 120V 60 Hz
MODE L N O.: A -18 00
CALIFORNIA, UNITED STATES OF AMERICA
E- mai l: sal es@ bet ter mus icb u il der .co m
w w w. B e t te r M u si c B u il d e r .c o m
ENG INEER ED AN D DES IGN I N U.S .A.
MOD E
1.5V0.75V
1.0V
SENSITIVITY
OFFON
BASS BOOST
CAUTION:
TURN OFF AMPLIFIER BEFORE
CHANGING T HESE SWITCHS
CH A NNEL -1
LINK/OUT
INPUT
CH A NNEL -2
LINK/OUT
INPUT
L
O
C
K
L
O
C
K
394190316000
SERIAL NO.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WITHOUT AUTHORIZATION
A-1800 REAR VIEW
12
GAIN
32dB
0.775V
CH AN NE L 3
ALONELIN K
GAIN
32dB
0.775V
CH AN NE L 4
ALONELIN K
CH AN NE L 1
GAIN
32dB
0.775V
GAIN
32dB
0.775V
CH AN NE L 2
ALONELIN K
SI GN A L INPU T TE RM INAL
CAU TION : TU RN OF F AM PLIF IER B EFOR E CH ANGI NG T HIS S WIT CH
SP EAK ER O UTP UT T ERMI NA L
CAU TION : SP EAK ER CO NNEC TION WIT H 8o hm M IN IM PEDA NCE
CH AN NE L 1 CH AN NE L 2 CH AN NEL 3 C HAN NEL 4
360120725500
MOD EL: A -4
CALI FORNI A, UN ITED STATE S OF AMERI CA
E-ma il: s ales@ bette rmusi cbuil der.c om
w ww . B e tt e r M us i c B ui l d e r. c o m
ENGI NEERE D AND DESI GN IN U.S. A.
SAFETY
MARK
USA 120798-1029611-28
SER IAL N O.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAU TION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WITHOUT AUTHORIZATION
FUSE
AC-PO WE R
AC 120V 6 0Hz
4-CH POWER AMP A-4 REAR VIEW
LARGE FORMAT
The large format is perfect for multiple
speakers which require even higher power
and great for concerts and live performances.
CENTER / MONITOR DFS-306
WIRED MIC. 2WIRED MIC. 1 KOD GUITAR
EX-8 FRONT VIEW
XLRXLR XLR
HD VOCAL LOUDSPEAKER
DFS-912 or DFS-915
XLRXLR
MIXER DX-8000
MIC 2MIC 1 MIC 3
MIC. INPU T
Better Music Builder
®
Pass iona te a bou t Mu sic
MIC 3
MIC. VOL UME
IR
FEEDB ACK
AUDI O VID EO EF FECTS PROC ESSOR DX-8000
High Defin ition Live Soun d
MIC
EFFEC T
MUSIC
EQ
GAIN
BACK
DELAY
LIMIT ER
SYST EM
POLA RITY
X-OV ER
PROGR AM
ENTE R / E SC
LEFT RIGHT
GROU P-A
LEFT
RIGHT
GROU P-B
CENT ER
MONITOR
SUB
BASS
OUTP UT L EVE L
CLIP
LIMIT
0dB
-12dB
-24dB
EDIT
CLIP
LIMIT
0dB
-12dB
-24dB
EDIT
MIC 2 /5MIC 1/ 4
Sof twa re
Sui te
USB
to P C
VOCAL DFS-206VOCAL DFS-206
SUBWOOFER DFS-112 SUB
HD VOCAL LOUDSPEAKER
DFS-912 or DFS-915
13
CONTROLS AND FUNCTIONS
Amplifier
FRONT PANEL:
1
2
3
CHANNEL-1 GAIN CONTROL
ACTIVE LED INDICATOR
This LED lights when the amplifier operates normal.
SIGNAL LED INDICATOR
This LED lights when its channel makes an output signal.
DDT (DISTORTION DETECTION TECHNIQUE) LED
INDICATOR
When the output signal distortion is happened, the DDT
LED indicator will light up.
CHANNEL-2 GAIN CONTROL
DC LED INDICATOR
When the circuit is operated unusual, the DC protection
will be activated and the DC LED indicator will light up.
When the problem is removed, the light is off and
normal operation resumes.
TEMP LED INDICATOR
When the temperature is operated unsafe, the TEMP
protection will be activated and the TEMP LED indicator
will light up. When the problem is removed, the light is
off and normal operation resumes.
POWER BUTTON ON/OFF
ANTI-DUST VENTILATION GRILL
5
6
7
8
9
CHANNEL-2 AUDIO OUTPUT
BASS BOOST
CHANNEL-1 AUDIO OUTPUT
CHANNEL-1 & 2 SPEAKER OUTPUT (BRIDGE POST)
AC POWER: 120V for USA & Canada. 220V for Asia
and Europe.
10
CHANNEL-2 ¼˝ TRS AND XLR AUDIO COMBO INPUT
SENSITIVITY SWITCH: Setting amplifier's input sensitivity.
WOKING MODES SWITCH (BRIDGE/PARALLEL/STEREO)
CHANNEL-1 ¼˝ TRS AND XLR AUDIO COMBO INPUT
CHANNEL-1 & 2 SPEAKON OUTPUT TERMINAL
FUSE: Housing for the power supply fuse.
11
12
13
14
15
16
17
18
19
20
REAR PANEL:
POWER
DC
DDT
TM
TEMP
SIGNAL
ACTIVE
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CH A N NEL-1
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CH A N NEL-2
2-CHANNEL POWER AMPLIFIER
3 54 6 7
2
8 9
1
SP E AKER O U T P U T TERMI N A L
FUSE: T12 AL
/
250 V
BRIDGESTEREO
PARALLEL
SI G N A L INPU T/OUTPUT T ERMINAL
CH -1BR IDG E
CH A N NEL-1
CH - 2
CH A N NEL- 2
SPEAKON
CH-1 OU T
PIN1+=
PIN1–=
CH-2 OUT
PIN1+=
PIN1–=
BRIDGE
PIN1+=
PIN2+=
AC-POWER
AC 120V 60 Hz
CALIFORNIA, UNITED STATES OF AMERICA
E- mai l : s ale s @be tte rmu s icb uil d er. com
w w w . B e t t e r M u s i c B u i l d e r . c o m
ENGINEE RE D AN D DE SI GN I N U. S. A.
MODE
1.5V0.75V
1.0V
SENSITI VIT Y
OFFON
BASS BOOST
CAUTION:
TURN OFF AMPLIFIER BEFORE
CHANGING THESE SWITCHS
CH A N NEL-1
LINK/OUT
INPUT
CH A N NEL- 2
LINK/OUT
INPUT
L
O
C
K
L
O
C
K
CAUT IO N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WITHOUT AUTHORIZATION
16 17 18 2019
10 12 13 14 1511
4
SPE AKER OUTPUT TERMINAL
BRIDGESTEREO
PARALLEL
SIGNAL INPUT/OUTPUT TERMIN AL
CH-1BRIDGE
CHANNEL-1
CH-2
CHANNEL- 2
SPEAKON
CH-1 OUT
PIN1+=
PIN1–=
CH-2 OUT
PIN1+=
PIN1–=
BRIDGE
PIN1+=
PIN2+=
MODE
1.5V0.75V
1.0V
SENSITIVITY
OFFON
BASS BOOST
CAUTION:
TURN OFF AMPLIFIER BEFORE
CHANGING THESE SWITCHS
CHANNEL-1
LINK/OUT
INPUT
CHANNEL- 2
LINK/OUT
INPUT
L
O
C
K
L
O
C
K
14
OPERATION
Opera ting
REAR PANEL OPERATION
STEREO & PARALLEL MODE CONNECTION
Make sure the switch is on STEREO or PARALLEL MODE
MODE
BRIDGESTEREO
PARALLEL
SPE AKER OUTPUT TERMINAL
BRIDGESTEREO
PARALLEL
SIGNAL INPUT/OUTPUT TERMIN AL
CH-1BRIDGE
CHANNEL-1
CH-2
CHANNEL- 2
SPEAKON
CH-1 OUT
PIN1+=
PIN1–=
CH-2 OUT
PIN1+=
PIN1–=
BRIDGE
PIN1+=
PIN2+=
MODE
1.5V0.75V
1.0V
SENSITIVITY
OFFON
BASS BOOST
CAUTION:
TURN OFF AMPLIFIER BEFORE
CHANGING THESE SWITCHS
CHANNEL-1
LINK/OUT
INPUT
CHANNEL- 2
LINK/OUT
INPUT
L
O
C
K
L
O
C
K
MODE
BRIDGESTEREO
PARALLEL
MODE
BRIDGESTEREO
PARALLEL
OR
SPEAKER SPEAKER
BRIDGE MODE CONNECTION
Make sure the switch is on BRIDGE MODE
SPEAKER SPEAKER
15
PHYSICAL DIMENSIONS
Dimensions
PACKING DIMENSIONS
(WxHxD)
23x5.9x21.9 in
58.5x15x55.5 cm
DIMENSIONS
(WxHxD)
19x3.5x17 in
48.3×8.9×43.2 cm
MODEL
A-1600 A-1800
NET WEIGHT
36.4 Lbs / 16.5 Kg
SHIPPING WEIGHT
39.7 Lbs / 18 Kg
23x5.9x21.9 in
58.5x15x55.5 cm
19x3.5x17 in
48.3×8.9×43.2 cm
38.6 Lbs / 17.5 Kg
41.9 Lbs / 19 Kg
A-1600 Front View
19”
48.3 cm
3.5”
8.9 cm
17”
43.2 cm
POWE R
DC
DDT
TM
TEMP
SIGNA L
ACTIV E
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CHA NNEL -1
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CHA NNEL -2
2-C HANNEL P OWER A MPLIFIER
A-1600
A-1800 Front View
19”
48.3 cm
3.5”
8.9 cm
17”
43.2 cm
POWE R
DC
DDT
TM
TEMP
SIGNA L
ACTIV E
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CHA NNEL -1
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CHA NNEL -2
2-C HANNEL P OWER A MPLIFIER
A-1800
0dB
Volume
CENTER
5-CHANNEL POW ER AMPLIFIER
POWER
OFF ON
0dB
Volume
Channel-A
Main Left
LIGHT
CUP
SIGNAL
POWER
0dB
Volume
Channel-B
Main Right
LIGHT
CUP
SIGNAL
POWER
0dB
Volume
Channel-C
Rear Left
LIGHT
CUP
SIGNAL
POWER
0dB
Volume
Channel-D
Rear Right
LIGHT
CUP
SIGNAL
POWER
MIC . V OL UM E
VOLMIC ROP HO NE TO NE
MIC. INPUT
MIC 1 MIC 2
EXCITER
VOLHIGH SUB FREQ
Hz
MIC 1 3 MIC 2 4 LOW REAR
TREBLE
MID
BASS
MOD E A DJ US TAB LE
CENTER
MUSIC VOL
20 240
VOL
EXCITER MIC AUDIO SUB INPUT
SR
UP
DOWN
MEMORY
5 CHANNEL AUDIO VIDEO EFFECTS PROCE SSOR
MUSIC VOL 10
CDG
DVD VOD
POWER
PORTABLE SYSTEM
POWER
DC
DDT
TM
TEMP
SIGNAL
ACTIVE
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CHANN EL-1
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CHANN EL-2
2-CHA NNEL PO WER AMPL IFIER A- 1600
POWER ANT ENA-A CNANNEL-A DISP LAY CNANNEL-B DISP LAY
CHANNEL-A
VOLUME
ANTENA-B
CHANNEL-B
VOLUME
DUAL CHANNE L VHF WIREL ESS SYSTEM
RF
AF
FREQ.
5 10 15 20 25 30 35 40
-30 -25 -20 -15 -10 -5 0 PEAK
000.000
M
H
Z
MUTE
RF
AF
FREQ.
5 10 15 20 25 30 35 40
-30 -25 -20 -15 -10 -5 0 PEAK
000.000
M
H
Z
MUTE
AIR VENTILATION
This series of amplifiers use the same ventilation structure.
First, cool air enters through the front panel. While inside, it
goes through the transformer and enters the fan. And then it
is finally compressed into the radiator and flows out from the
rear outlets.
COOL
AIR ENTERS
(Front)
WARM
AIR EXITS
16
SPECIFICATIONS
Spec
MODEL
RATED POWER
@ 1kHz/1% THD
Stereo 8ohm
Stereo 4ohm
Bridge 8ohm
Bridge 4ohm
600W x 2
900W x 2
1800W
2400W
8ohm
4ohm
Bridge 8ohm
Bridge 4ohm
800W x 2
1200W x 2
2400W
3200W
20Hz - 20KHz,+/-0.5dB
<0.05% (1kHz, normal operating conditions)
<0.02% (60Hz/7KHz,10% Rated Power)
0.75V, 1.0, 1.5V (Selectable)
Unbalanced input 10K Ohms, Balanced input 20K Ohms
>105dB (A Weight)
>500 @ 8ohm/100Hz
Power button, 2 Front panel gain controlling knob for Channel-1 and Channel-2
5 LED indicators per channel: DC, Temperature, DDT, Signal and Active
Stepless shifting, Cooling airflow from front to back
CLIP limit, Short circuit, thermal overload, DC overload
Signal Inputs: 2 Combo 1/4” XLR, Signal Outputs: 2 XLR,
Speaker Outputs: 2 dual-banana outputs & 2 speakon outputs
0.062” Thick Aluminum
120V/50Hz – 60Hz
FREQUENCY RESPONSE
THD+N
IMD
INPUT SENSITIVITY
INPUT IMPEDANCE
S/N RATIO
DAMPING FACTOR
CONTROLS
INDICATOR LEDS
COOLING
PROTECTION
CONNECTORS
CONSTRUCTION
STANDARD POWER
A-1600 A-1800
POWER
DC
DDT
TM
TEMP
SIGNAL
ACTIV E
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CHA NNEL- 1
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CHA NNEL- 2
2-CH ANNEL P OWER AM PLIFIER A-1600
POWER
DC
DDT
TM
TEMP
SIGNAL
ACTIV E
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CHA NNEL- 1
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CHA NNEL- 2
2-CH ANNEL P OWER AM PLIFIER A-1800
17
TROUBLESHOOTING
1. NO SOUND: Power indicator is Off.
REMEDY:
• Check the AC Plug.
• Ensure that the AC outlet works by testing other devices. If
too many amplifiers are used on one outlet, the building's
circuit breaker may trip and shut off power.
• Check the overload switch located on rear panel.
• An amplifier that keeps shutting off may have a serious
internal fault. Turn it off, remove AC power, and have the
amplifier serviced by a qualified technician.
2. NO SOUND: The power indicator light is On but signal
light is Off.
REMEDY:
If the POWER indicator LED is On and the fan is running,
but the signal LED indicate no signal, check the input. Make
sure the signal source is operating and try another input
cable. Connect the source to another channel or amplifier to
confirm its operation.
Check audio cables or microphone cables.
Use a better audio cable or 3pin XLR microphone cable.
Ensure microphone is On.
Check the microphone volume.
3. DDT (DISTORTION DETECTION TECHNIQUE) LED
INDICATOR IS ON & SOUND IS ABNORMAL
REMEDY:
Sound of music signal output amplitude is too high.
The gain level is set too high.
Ensure the output connection is connected correctly and
then reboot the machine.
4. SIGNAL LED IS NOT RESPONDING TO SIGNAL LEVEL
REMEDY: If the SIGNAL indicator is lighting normally, the
problem may be between the amplifier and the speaker.
Check the speaker wiring for breaks. Try another speaker
and cable.
Troubleshooting
5. BAD AUDIO OR MICROPHONE SOUNDS
REMEDY:
Check the source of audio (CD, DVD) to see if it’s
scratched.
Check audio cables or microphone cables.
Use a better audio cable or 3pin XLR microphone cable.
6. THERE IS NO PICTURE
REMEDY:
Check to see if video sources are selected accordingly.
Check to see if plugged in the video cables are plugged in.
Check TV or display monitor.
7. VIDEO IS FLICKERING
REMEDY:
Check to see if the AV cable is damaged.
Use a better AV cable.
We recommend connecting videos to the TV or monitor
directly for best results.
8. POWER CAN NOT BE TURNED ON
REMEDY:
Check to see if unit is plugged in properly.
Check power cable.
9. PROTECTION FOR AUDIO/VIDEO EQUIPMENT
Before hooking up or disconnecting any audio/video equip-
ment, turn off the power for all equipment. Otherwise, it may
cause black spots to appear on the LCD or Plasma TV screen.
10. AMPLIFIER SHUT DOWN/INTERFERENCE NOISE
CAUSE: The amplifier turned On but there is no music coming
out from the speaker powered output channels.
REMEDY: Ensure that the AC-power supply is connected to the
correct voltage level according to your region.
18
11. NOISE AND DISTORTION
When humming noise or displeasing sound appears, replace
the supplied power cord with an AC power cord with a
magnetic device as shown in the figure below.
In North America many families own satellite TVs, HD TVs
and cable TV receivers. They may cause interference which
affect both audio and video equipment. The power cord as
shown in figure 2 may help eliminate the humming sound
and enhance TV picture quality.
12. SOUND PROBLEM: No sound.
REMEDY:
Positive and negative of
speaker wire are touching
each other at the terminals.
We recommend the usage
of double banana plugs.
3 prong to 2 prong adaptor
110V~120V
FIGURE 1
Qualit y Power Cord:
105°C 3C/18AWG 300V
FIGURE 2
NOTE
SPEAKERS
TROUBLESHOOTING (Continued)
19
WARRANTY
ONE-YEAR LIMITED WARRANTY FOR HOME USE
EQUIPMENT
Our one-year warranty covers both parts and labors. The
warranty becomes effective from the date of your purchase
for one year.
Our warranty only covers defects due to product
defectiveness with free of defects in materials or
workmanship. However, our warranty does not cover defects
due to normal wears, damage in transit, improper use, abuse
or failure to follow the proper instructions for maintenance.
This warranty is void in the event of unauthorized repairs,
alternations, modifications and removing of the product label.
Please also note that our warranty does not cover any
shipping cost for the return of defective products to us for
inspection, repair and maintenance. Our warranty for Better
Music Builder products can only be executed in North
America.
90-DAY LIMITED WARRANTY FOR PUBLIC AND
COMMERCIAL USE EQUIPMENT
Our 90-day warranty applies to speakers, amplifiers, mixers
and microphones for both public and commercial use such as
restaurant, coffee shop, KTV nightclub, church and school,
etc. It covers both parts and labors. The warranty becomes
effective from the date of your purchase for 90 days.
Our warranty only covers defects due to product
defectiveness with free of defects in materials or
workmanship. However, our warranty does not cover defects
due to normal wears, damage in transit, improper use, abuse
or failure to follow the proper instructions for maintenance.
This warranty is void in the event of unauthorized repairs,
alternations, modifications and removing of the product label.
Please also note that our warranty does not cover any
shipping cost for the return of defective products to us for
inspection, repair and maintenance. Our warranty for Better
Music Builder products can only be executed in North
America.
Warranty
ADDITIONAL NOTES:
1. Limited warranty for home use equipment is only valid in
North America.
2. Limited warranty is valid only if you purchase our products
from our authorized dealers (including both regular retailers
and online retailers) in North America. If you choose to
purchase our products from an authorized dealer, we will not
provide any limited product warranty for you. To protect your
limited product warranty, please purchase our products from
one of our authorized dealers in North America near you.
3. Limited warranty is automatically void if the yellow label
stating “No Warranty After Opening” is removed from the
product.
TO REGISTER YOUR WARRANTY
Please fill out the warranty card that came with your unit,
download or submit online warranty form. However, we need
the invoice for your purchase in order to process this warranty.
You may also register your warranty online.
Please visit our website at ww w.bettermusicbuilder.com.
20
AGENCY REGULATORY NOTICES
Federal Communications Commission Notice
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio or television
technician for help.
Modifications
The FCC requires the user to be notified that any changes or
modifications made to this device that are not approved may
void the user’s authority to operate the equipment.
Cables
Connections to this device must be made with shielded cables
with metallic RFI/EMI connector hoods to maintain
compliance with FCC rules and regulations.
Materials Disposal
Disposal of this material can be regulated because of
environmental considerations. For disposal or recycling
information, contact your local authorities or the Electronic
Industries Alliance (EIA) (http://www.eiae.org).
Disposal Of Waste Equipment By Users In
Private Households In The European Union
This symbol on the product or on its packaging indicates that
this product must not be disposed of with your other
household waste. Instead, it is your responsibility to dispose of
your waste equipment by handing it over to a designated
collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of
your waste equipment at the time of disposal will help to
conserve natural resources and ensure that it is recycled in a
manner that protects human health and the environment. For
more information about where you can drop off your waste
equipment for recycling, please contact your local city office,
your household waste disposal service or the shop where you
purchased the product.
Japanese Notice
Japanese Power Cord Notice
Japanese Material Content Declaration
A Japanese regulatory requirement, defined by Specification
JIS-C-0950, 2005, mandates that manufacturers provide
Material Content Declarations for certain categories of
electronic products offered for sale after July 1, 2006.
Korean Notice
Recycling Program
The terms and availability of these programs vary by
geography because of differences in regulatory requirements
and local customer demand.
因为在当地的监管要求和客户的需求，这些条件和程序的情
况不同。
Notices
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/