CONTEC CO.
,
LTD.
3-9-31
,
Himesato
,
Nishi
y
odo
g
awa-ku
,
Osaka 555-0025
,
Ja
p
an
http://www.contec.com
/
No part of this document may be copied or reproduced in any form by any means
without prior written consent of CONTEC CO., LTD.
NA07414 (LYYF962) 08032020_rev2 [06122020] August 2020 Edition
Product Guid
e
Wall mount type Solution-ePC series
SPF10SQ1700
Thank you for purchasing this product. The product you have purchased consists of the
following items.
Check, with the following list, that your package is complete.
If you find any item either missing or damaged, please contact the sales representative you
purchased the product from.
For appropriate usage, be certain to read the Reference Manual before using this product.
The following manuals come with this product. Visit our website and download them by
entering the model type in "Downloads". Read them before using the product.
Before using the product, be certain to read the following guide, manual, and driver
software. They can be downloaded from Contec website.
Name Contents How to get
Product Guide (This sheet) This lists the product configuration and
describes the
p
recautions.
Included in the package
(Printed matter)
Reference Manual This describes the hardware aspects
such as functions and settings.
Download (PDF)
IPC Precaution List This describes the precautions when
usin
g
the
p
roduct.
Included in the package
(Printed matter)
Download
https://www.contec.com/download/
1. About the Product
This product is a compact-sized industrial computer that is compatible with 6th-generation
(Skylake) and 7th-generation (Kaby Lake) of Intel® Core™ series processors and adopts the
Q170 chipset. In addition to a wide variety of interfaces, expansion slots of PCI bus×7 and
PCIe(x16) bus are equipped.
The Highly reliable Japanese power supply (by Nipron) is adopted for the power supply
2. Product Configuration
This product consists of the items listed below.
Check, with the following list, that your package is complete. If you discover damaged or
missing items, contact your retailer.
SPF10SQ1700-
Sxxxxxx0xxxxx
[Base Model]
SPF10SQ1700-
Sxxxxxxxxxxxx
[OS Pre-install Model]
Name Pcs. Pcs.
The Main Body
1 1
Mount Bracket
2 2
Rubber Feet
4 4
COM Cable *2 1 1
Pan-head Screw (#6-32UNCx5) 12 12
Three-point Sems Screw
(M3 x 6)
12 12
Hexagon-head Screw for
Mount Bracket (M4 x 6)
４ ４
DVI-Analog RGB Branch Cable
1 1
Power Cord
1 1
Security Key *2
2 2
Keyboard *2
1 1
Mouse *2
1 1
Product Guide (this sheet)
1 1
IPC Precaution List
1 1
Warranty Certificate
1 1
Serial Number Label
1 1
Driver & Utility *1
1 -
Recovery Media *1
- 1
*1 Recovery media is packed in the OS pre-installed Model, and Driver & Utility is packed
in the Base Model.
*2 Configuration differs depending on the selection.
3. Safety Precautions
Understand the following definitions and precautions to use the product safely.
Safety Information
This document provides safety information using the following symbols to prevent acci-
dents resulting in injury or death and the destruction of equipment and resources. Under-
stand the meanings of these labels to operate the equipment safely.
DANGER
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation
whi
ch, if not avoided, could result in death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate injury or in
property damage.
Handling Precautions
WARNING
Always check that the power supply is turned off before connecting or disconnecting AC
power cable.
Do not use the product in locations exposed to a flammable or corrosive gas. It may
cause explosion, fire, electrical shock, or malfunction.
Do not touch metal parts (edge connector) with your hands. Otherwise, the product may
malfunction, or cause failure.
When transporting the product, pack it in the same condition as delivered from the
Contec or in equal packing condition to avoid applying shock, vibration, or static elec-
tricity directly to the product.
Do not modify the product.
Always turn off the power before inserting or removing the boards or cables.
This product is not intended for use in aerospace, space, nuclear power, medical equip-
ment, or other applications that require a very high level of reliability. Do not use the
product in such applications.
If using this product in applications where safety is critical such as in railways, automotive,
or disaster prevention or security systems, please contact your retailer.
Do not attempt to replace the battery as inappropriate battery replacement poses a risk
of explosion.
For battery replacement, contact your retailer as it must be performed as a process of
repair.
When disposing of a used battery, follow the disposal procedures stipulated under the
re
levant laws and municipal ordinances. For details on replacing the battery, refer to the
appendix.
This product is connected to a socket-outlet with earthing connection by means of a
power cord.
This product is not suitable for use in locations where children are likely to be present.
CAUTION
Do not use or store this product in a location exposed to high or low temperature that
exceeds range of specification or susceptible to rapid temperature changes.
e.g. - Exposure to direct sun - In the vicinity of a heat source
Do not use this product in extremely humid or dusty locations. It is extremely dangerous
to use this product with its interior penetrated by water or any other fluid or conductive
dust. If this product must be used in such an environment, install it on a dust-proof con-
trol panel, for example.
Avoid using or storing the product in locations subject to shock or vibration that exceeds
range of specification.
Do not use this product in the vicinity of devices that generate strong magnetic force or
noise. Such products will cause this product to malfunction.
Do not use or store this product in the presence of chemicals.
To clean this product, wipe it gently with a soft cloth dampened with either water or mild
detergent. Do not use chemicals or a volatile solvent, such as benzene or thinner, to
prevent pealing or discoloration of the paint.
CONTEC does not provide any guarantee for the integrity of data on storage.
Always disconnect the power cable from the receptacle before mounting or removing
the ex
pansion board, before connecting or disconnecting any connector.
To prevent corruption of files, always shutdown the OS before turning off this product.
CONTEC reserves the right to refuse to service a product modified by the user.
In the event of failure or abnormality (foul smells or excessive heat generation), unplug
the power cord immediately and contact your retailer.
Use the AC power cable that matches the power supply voltage and outlet plug that you
are using. (The supplied cable is designed for use with a 125 VAC power supply.)
Always turn off the power before replacing storage. It is not hot-swappable. Removing
the storage during the operation may results in system damages.
Continuously operating the product may decrease the service life of the hard disk drive,
so use the standby mode.
Component Life:
- Power --------------The assumed life is about 4 years when the product is continuously
operated at a temperature of 40°C. However, it may be shortened
duetotheoperatingtemperature.
- Battery -------------The internal calendar clock and CMOS RAM are backed by a Lithium
primary battery. The backup time at a temperature of 25°C with the
powerdisconnectedis7years.
- SSD (256GB MLC) --Endurance (Terabytes Written): 370(TB)
- System FAN -------- The expected life: 5 years at a temperature of 40°C
- CPU-FAN ----------- The expected life: 5 years at a temperature of 40°C
* Replacement of expendables is handled as a repair (there will be a charge).
To connect with peripherals, use a grounded, shielded cable.
Do not use a UPS (Uninterruptible Power Supply) that generates square waves. Connect-
ing the product to this type of UPS may lead to product failure.
If you use this product in a noisy environment, attach a ferrite core to each cable (LAN,
USB, serial and DVI-I) to stabilize the operation.
When the product power is turned on/off, undefined data may be output from the serial
port. Configure a system that can handle such a case on the receiving side.
/