JVC EXAD KW-NX7000 Instructions Manual

ENGLISH

FRANÇAIS

DEUTSCH

KW-NX7000

For installation and connections, refer to the separate manual.

Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.

Pour l’installation et les raccordements, se référer au manuel séparé.

INSTRUCTIONS

BEDIENUNGSANLEITUNG

MANUEL D’INSTRUCTIONS

LVT1839-001A

[E]

For canceling the display demonstration, see page 9.

Zum Abbrechen der Displaydemonstration siehe Seite 9.

Pour annuler la démonstration des affichages, référez-vous à la page 9.

NAVIGATION/DVD RECEIVER

NAVIGATIONSSYSTEM/DVD-RECEIVER

SYSTÈME DE NAVIGATION/RÉCEPTEUR DVD

Cover_KW-NX7000E.indd 2Cover_KW-NX7000E.indd 2 08.7.3 3:51:42 PM08.7.3 3:51:42 PM

ENGLISH

2

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best

possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to

qualified service personnel.

3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical

instruments.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

WARNINGS:

To prevent accidents and damage

• DO NOT install any unit or wire any cable in a

location where;

– it may obstruct the steering wheel and

gearshift lever operations.

– it may obstruct the operation of safety devices

such as air bags.

– it may obstruct visibility.

• DO NOT operate the unit while driving.

If you need to operate the unit while driving, be

sure to look around carefully.

• The driver must not watch the monitor while

driving.

• If the parking brake is not engaged, “Parking

Brake” flashes on the monitor, and no playback

picture will be shown.

– This warning appears only when the parking

brake wire is connected to the parking

brake system built in the car (refer to the

Installation/Connection Manual).

Information for Users on Disposal of Old

Equipment

This symbol indicates that the product with

this symbol should not be disposed as general

household waste at its end-of-life. If you wish to

dispose of this product, please do so in accordance

with applicable national legislation or other rules in

your country and municipality. By disposing of this

product correctly, you will help to conserve natural

resources and will help prevent potential negative

effects on the environment and human health.

This symbol is only valid in

the European Union.

KW-NX7000[E].indb 2KW-NX7000[E].indb 2 08.7.1 5:38:46 PM08.7.1 5:38:46 PM

3

ENGLISH

INTRODUCTION

How to reset your unit

How to forcibly eject a disc

• If this does not work, reset the unit.

For security reasons, a numbered ID card is provided

with this unit, and the same ID number is imprinted on

the unit’s chassis. Keep the card in a safe place, as it will

help the authorities to identify your unit if stolen.

[Hold] [Hold]

For safety...

• Do not raise the volume level too much, as this will

block outside sounds, making driving dangerous.

• Stop the car before performing any complicated

operations.

Temperature inside the car...

If you have parked the car for a long time in hot or cold

weather, wait until the temperature in the car becomes

normal before operating the unit.

Cautions on the monitor:

• The monitor built in this unit has been produced

with high precision, but it may have some

ineffective dots. This is inevitable and is not

malfunction.

• Do not expose the monitor to direct sunlight.

• Do not operate the touch panel using a ball-point

pen or similar tool with the sharp tip.

Touch the buttons on the touch panel with your

finger directly (if you are wearing a glove, take it

off).

• When the temperature is very cold or very hot...

– Chemical changes occur inside, causing

malfunction.

– Pictures may not appear clearly or may move

slowly. Pictures may not be synchronized with

the sound or picture quality may decline in

such environments.

• Your preset adjustments will also

be erased.

This unit functions properly only when the speed

signal lead is connected (refer to the Installation/

Connection Manual).

Every time you turn on the unit or attach the monitor

panel with the ignition switch turned on, the screen

below appears. Pay sufficient attention when operating

the unit and make sure of safe driving.

Notes on the SD slot for System

updating:

The SD slot marked below is for System updating. To

update the System, ☞ page 18.

• Do not remove the cover in any case other than

updating the System.

SD slot for system updating

Press and hold OPEN/TILT while holding

/ATT.

KW-NX7000[E].indb 3KW-NX7000[E].indb 3 08.7.1 5:38:50 PM08.7.1 5:38:50 PM

ENGLISH

4

INTRODUCTION

Before operations ........................... 5

Initial settings ................................ 7

Basic operations — Monitor panel/

touch panel ................................. 10

Basic operations —

Remote controller (RM-RK250) ..... 11

Menu operations ............................ 15

NAVIGATION SYSTEM

Safety instructions for the Navigation

System ........................................ 18

Basic operations ............................. 19

Registering your home/favourite points

.................................................. 22

Starting guidance ........................... 25

Searching for a place ....................... 28

How you are guided ........................ 39

Arranging your route ...................... 43

Traffic information on the map

— TMC ....................................... 45

Navigation menu items ................... 48

Additional information ................... 53

AV OPERATIONS

Common operations on AV screens ... 58

Listening to the radio ..................... 60

Disc operations ............................... 67

SD operations ................................. 82

USB operations ............................... 84

Bluetooth® operations — Mobile

phone/audio player ..................... 86

Listening to the CD changer ............. 93

Listening to the DAB tuner .............. 95

Listening to the iPod ....................... 99

Using other external components .... 103

Sound equalization ......................... 105

Assigning titles to the sources ......... 106

AV menu items ............................... 107

Additional information ................... 115

REFERENCES

Maintenance .................................. 123

Troubleshooting ............................. 124

Specifications ................................. 129

Contents

KW-NX7000[E].indb 4KW-NX7000[E].indb 4 08.7.1 5:38:52 PM08.7.1 5:38:52 PM

5

ENGLISH

INTRODUCTION

Screen

While the unit is turned on, you can turn off the screen

by holding DISP.

The screen is turned on again in the following cases:

– When you touch the touch panel

– When you press MAP on the monitor panel or press

DISP

– When a call/SMS comes in (for Bluetooth mobile

phone)

– When the signal from the rear view camera comes in

Before operations

Monitor panel buttons

The lights of the monitor panel buttons are turned off

when no operation is done for about 5 seconds.

They are turned on again in the following cases:

– When you touch the touch panel or move your hand

nearby*

– When you use the remote controller

– When a call/SMS comes in (for Bluetooth mobile

phone)

– When the source is automatically changed by

receiving the Traffic Announcement/PTY programme

* Depending on the <Illumination> setting.

(☞ page 111)

[Hold]

Features of the illumination

INTRODUCTION

In the explanation, operating buttons shown on the touch panel are indicated inside [ ].

For details on the touch panel operations, see each section.

Touch panel

Monitor panel Monitor panel

Map screen AV screen

The lights of the monitor panel buttons are always

turned on in the following cases:

– While operating buttons are displayed on the

map screen.

– While AV menu screen is displayed.

– While <Source Menu> screen is displayed.

– While <Open/Tilt> menu is displayed.

– When <Illumination> is set to <Normal>.

(☞ page 111)

KW-NX7000[E].indb 5KW-NX7000[E].indb 5 08.7.1 5:38:53 PM08.7.1 5:38:53 PM

Detach?Yes No

Open

Eject

Close

Tilt +

Tilt –

Exit

Open/Tilt

Detach

ENGLISH

6

Detaching/attaching the monitor panel

Detaching

1 While the unit is turned on:

The monitor panel opens by about 50°.

• It closes automatically when no operation

is done for about a minute.

2

• The attaching plate closes automatically

about 10 seconds after the monitor panel is

released. Remove the monitor panel before

this happens.

3

Attaching

Caution:

• Hold the monitor panel securely so

as not to drop it accidentally.

• Fit the monitor panel onto the

attaching plate until it is firmly

locked.

Soft case

(supplied)

The monitor panel is

released.

Attaching plate

KW-NX7000[E].indb 6KW-NX7000[E].indb 6 08.7.1 5:38:54 PM08.7.1 5:38:54 PM

7

ENGLISH

INTRODUCTION

Initial settings

Installation settings

When you turn on the unit for the first time, the initial

setup screen appears. Follow the procedure below and

make the necessary settings.

Indication language:

In this manual, English indications are used for

the purpose of explanation. You can select the

indication language.

~ Turn on the power.

Ÿ Select the language you want for the

display and the voice guidance.

The power is turned off then turned on

automatically so that your setting takes effect.

• Some languages are not available on AV

screen. (☞ page 108)

When you display the AV screen with the

unavailable language selected on the

navigation screen, the language previously

selected on the AV screen is used (if the

language setting on the AV screen is not

performed, English is used).

!

Normally select [Start Installation Settings].

• If you select [Skip Installation Settings

(for store display)], the System starts in the

navigation demonstration mode for stores

(☞ page 53).

You need to make the settings you turn on the

power next time.

Moves to the next/previous list

Continued on the next page

KW-NX7000[E].indb 7KW-NX7000[E].indb 7 08.7.1 5:38:55 PM08.7.1 5:38:55 PM

ENGLISH

8

⁄ Adjust the settings.

Country* Select the country where you

are living.

Reverse

Signal

Polarity

Select the reverse signal polarity

(<Battery> or <GND>)

according to the connection of

your car.

You can also change these settings through

the menu screens as follows:

• Language:

<

(Function Menu)>

- < (Map Settings)> -

<System> - <Language> (☞ page 51)

• Reverse Signal Polarity:

<AV Menu> - <Setup> -

< (Others)> - <Reverse Signal>

(☞ page 111)

* You can also change the country when

searching for a destination.

@ Finish the procedure.

KW-NX7000[E].indb 8KW-NX7000[E].indb 8 08.7.1 5:38:56 PM08.7.1 5:38:56 PM

Exit

Back Exit

Setup

Demonstration

Wall Paper

Color

Scroll

Dimmer

Dimmer Time Set

Blue

Metal

Auto

AutoOnce

718

Back Exit

Setup

Demonstration

Wall Paper

Color

Scroll

Dimmer

Dimmer Time Set

Blue

Metal

Auto

AutoOnce

718

9

ENGLISH

INTRODUCTION

You can cancel the demonstration on the screen.

1 Turn on the power.

If the map is displayed, switch the screen to the AV

screen by pressing DISP.

2

3

Canceling demonstration

4 Cancel the demonstration.

Select <Off>.

5 Finish the procedure.

KW-NX7000[E].indb 9KW-NX7000[E].indb 9 08.7.1 5:38:57 PM08.7.1 5:38:57 PM

Open

Eject

Close

Tilt +

Tilt –

Exit

Open/Tilt

Detach

15

VOL

ENGLISH

10

Basic operations — Monitor panel/touch panel

• Turns on the power.

• Turns off the power. [Hold]

• Attenuates the sound (if the power is on).

• Changes the display information.*

2

• Turns off the screen. [Hold]

Remote sensor

Adjusts the volume.*

1

Resets the unit. ☞ page 3

• Use only when the internal system malfunctions.

*

1

Also adjustable on the

touch panel (on the AV

screen only): Move your

finger on the touch panel

as illustrated.

*

2

Each time you press DISP, the display changes to show

the various information.

• Operates the current source on the map screen.

• Searches for radio stations or ensembles.

• Selects tracks/chapters.

• Switches to the map screen.

• Displays your current position.

The number and

contents of AV screens

vary depending on the

source.

Map screen

<Open/Tilt> menu

• Shaded items cannot be used.

[Open] Opens the monitor panel.

[Eject] Ejects the disc.

[Close] Closes the monitor panel.

[Tilt +/–] Tilts the monitor panel.

[Detach] To detach the monitor panel.

[Exit] Erases this screen.

AV screen 2

AV screen 1

KW-NX7000[E].indb 10KW-NX7000[E].indb 10 08.7.1 5:38:57 PM08.7.1 5:38:57 PM

15:45

Source Off

Exit

Bayern Radio

Pop Music

11

ENGLISH

INTRODUCTION

Basic operations — Remote controller (RM-RK250)

Installing the battery

Insert the batteries into the remote controller by

matching the polarity (+ and –) correctly.

Caution:

Battery shall not be exposed to excessive heat such

as sunshine, fire or the like.

• If the range or effectiveness of the remote controller

decreases, replace both batteries.

R03/LR03/AAA

Before using the remote controller:

• Aim the remote controller directly at the remote

sensor on the unit.

• DO NOT expose the remote sensor to bright light

(direct sunlight or artificial lighting).

The unit is equipped with the steering wheel

remote control function.

• See the Installation/Connection Manual (separate

volume) for connection.

To turn off the AV function

• If the map is displayed, switch the screen to the AV

screen by pressing DISP.

• To activate the AV function:

For the operations on the AV screen

☞ page 58

KW-NX7000[E].indb 11KW-NX7000[E].indb 11 08.7.1 5:38:58 PM08.7.1 5:38:58 PM

ENGLISH

12

Main elements and features

For navigation system operations and AV operations

On the map screen On the AV screens On menu screens

1

AV/OFF

Switches to the AV screen. Selects the source.

• In navigation menus:

Switches to the AV screen.

• In <AV Menu> screen:

Selects the source.

Turns off the AV function if pressed and held, and turns on the AV function again if pressed briefly.

2

MAP/POS

Displays your current

position.

Switches to the map screen. Displays your current position.

3

MENU

Switches <Destination

Menu>, <Function

Menu>, and the map

screen. (☞ page 15)

Displays <AV Menu> screen.

(☞ page 16)

• In <Destination Menu>

screen: Displays the map.

• In <AV Menu>screen:

Displays the top screen of

<AV Menu> or switches to

the AV screen.

4

TRAFFIC

Displays <Traffic List>

screen. (☞ page 46)

(Not used)

5

ENT 6

(Not used)

• “DISC/SD/USB/USB iPod”: Plays/pauses.

• “Bluetooth PHONE”: Answers incoming

calls.

• “Bluetooth AUDIO”: Starts playback.

Confirms the selection.

6

5/∞

Scrolls the map (in eight

directions).

• Disc: Selects the title/group/program/

playlist.

• File: Selects the folders.

• FM/AM: Selects preset stations.

• DAB tuner: Selects the services.

• “USB iPod”: Selects previous/next item.

• “iPod”: Enters the main menu (5), and

pauses/resumes playback (∞).

In navigation menus: Selects

an item.

7

/

• FM/AM: Searches for stations.

• DAB tuner: Searches for ensembles.

• “DISC/SD/USB/USB iPod/iPod/

Bluetooth AUDIO”: Selects tracks/

chapters/items.

KW-NX7000[E].indb 12KW-NX7000[E].indb 12 08.7.1 5:38:59 PM08.7.1 5:38:59 PM

r

12

34

5

67

89

pq

w

e

t

13

ENGLISH

INTRODUCTION

On the map screen On the AV screens On menu screens

8

PHONE

• Displays <Dial Menu> screen. (☞ page 89)

• Displays <Redial> list if pressed and held. (☞ page 89)

• Answers incoming calls.

9

BACK/BAND

7/

Repeats the last voice

guidance during guidance.

•

“TUNER/DAB”: Selects the bands.

• “DISC/SD/USB“: Stops playback.

• “Bluetooth PHONE”: Ends the call.

• “Bluetooth AUDIO”: Pauses.

• In navigation menus: Displays

the map screen or the top

screen of current menu

(<Destination Menu> or

<Function Menu>).

• In <AV Menu> screen:

Switches to the AV screen.

p

VOL +/–

Adjust the volume.

q

+/–

Scales the map. (Not used)

w

HOME

Starts guidance to the home.

(☞ page 24)

(Not used)

e

ATT

Attenuates/restores the sound.

r

DISP

• Changes the display information. (☞ page 10)

• Turns off the screen if pressed and held, and turns on the screen again if pressed briefly. (☞ page 5)

t

Number

keys

(Not used)

• Enters numbers.

• “TUNER/DAB”: Selects the preset

station/service directly.

In navigation menus: Enters

a phone number or house

number.

Slide to open

These buttons do not

function at this position.

Continued on the next page

KW-NX7000[E].indb 13KW-NX7000[E].indb 13 08.7.1 5:39:00 PM08.7.1 5:39:00 PM

y

u

i

o

;

s

d

fgh

a

ENGLISH

14

Slide to open

These buttons do not

function at this position.

For AV operations only

On the AV screens

y

TOP M

• DVD/DivX 6: Shows the disc menu. (☞ pages 75 and 77)

• VCD: Resumes PBC playback. (☞ page 79)

• DVD-VR: Shows the Original Program screen. (☞ page 76)

u

DVD MENU

• DVD/DivX 6: Shows the disc menu. (☞ pages 75 and 77)

• VCD: Resumes PBC playback. (☞ page 79)

• DVD-VR: Shows the Playlist screen. (☞ page 76)

i

ENT

• Makes selection/settings.

• @ / #: Skips back or forward by 5 minutes for DivX/MPEG1/MPEG2. (☞ page 77)

• DISC +/– buttons: Changes discs for “CD-CH.”

o

OSD

Shows the on-screen bar. (☞ page 80)

;

RETURN

VCD: Returns to the PBC menu. (☞ page 79)

a

DIRECT/

CLEAR

• “DISC/SD/USB“: Switches the number entry mode. (☞ pages 75 to 79)

• Erases the misentry after entering a wrong number.

s

ASPECT

Changes the aspect ratio of the playback picture.

d

1/¡

“DISC/SD/USB/USB iPod”: Reverse search/forward search.

f

Disc: Selects the audio language/audio stream/audio channel.

g

Disc: Selects the subtitles.

h

Disc: Selects the view angle.

KW-NX7000[E].indb 14KW-NX7000[E].indb 14 08.7.1 5:39:01 PM08.7.1 5:39:01 PM

15

ENGLISH

INTRODUCTION

Menu operations

Continued on the next page

To display a menu

On the remote:

To return to the map, press [Exit] on the touch

panel or MAP/POS on the remote controller.

To return to the map, press [Exit] on the touch

panel or MAP/POS on the remote controller.

Map screen

Destination Menu (☞ page 48)

Function Menu (☞ page 49)

Navigation menus

Map Settings

(☞ page 50)

Returns to <Function Menu> screen

• If the operating buttons are

not displayed, touch the

screen.

KW-NX7000[E].indb 15KW-NX7000[E].indb 15 08.7.1 5:39:03 PM08.7.1 5:39:03 PM

Exit

Back Exit

Setup

Demonstration

Wall Paper

Color

Scroll

Dimmer

Dimmer Time Set

Blue

Metal

Auto

Once

618

Back Exit

Setup

Demonstration

Wall Paper

Color

Scroll

Dimmer

Dimmer Time Set

Blue

Metal

Auto

Once

618

ENGLISH

16

On the remote:

AV menu

AV screen

Returns to <AV Menu> screen

To return to the AV screen, press [Exit] on the

touch panel or DISP on the remote controller.

Moves to the succeeding

menu page

Returns to the previous screen

Exits from the

menu screen

Current page/total

menu pages

Moves to the

preceding

menu page

Moves to the preceding menu page

Moves to the succeeding menu page

Indicates the remaining time before the

current screen is erased automatically

Returns to the previous screen

Exits from the

menu screen

Basic menu operations

Navigation menu

Ex.: <Sound> in <Map Settings> screen

AV menu

Ex.: <Setup> menu in <AV Menu> screen

• Non-available items will be shaded on the menu

screen.

AV Menu (☞ pages 107 to 114)

Setup (☞ page 107)

KW-NX7000[E].indb 16KW-NX7000[E].indb 16 08.7.1 5:39:04 PM08.7.1 5:39:04 PM

Setup

AV Input

Camera Input

External Input

Audio&Video

iPod External

Off

Back Exit

Setup

Demonstration

Wall Paper

Color

Scroll

Dimmer

Dimmer Time Set

Blue

Metal

Auto

Once

618

Setup

AV Input

Camera Input

External Input

Audio&Video

iPod (Off)

Audio

Off

Back Exit

Exit

Setup

AV Input

Camera Input

External Input

iPod External

Off

Back Exit

Audio

17

ENGLISH

INTRODUCTION

!

• When operating on <AV Menu>, press

[Back] to close the selection list or to change

other settings.

⁄

The following steps are one of the fundamental

procedures. Some of the settings do not open the

sub-setting window, but just selecting an option will

change the setting.

• The display indications may change according to

change of the specifications.

Ex.: Changing the <AV Input> setting in <AV Menu>

screen

~

• You can also use MENU on the remote

controller.

Ÿ

KW-NX7000[E].indb 17KW-NX7000[E].indb 17 08.7.1 5:39:05 PM08.7.1 5:39:05 PM

18

ENGLISH

Safety instructions for the Navigation System

SAFETY INSTRUCTIONS

Use of the Navigation System is only permitted if the

traffic conditions are suitable and you are absolutely

sure that no risk, obstruction or inconvenience will be

incurred to you, your passengers or other road users.

The requirements of the Road Traffic Regulations must

always be followed. The destination must not be

entered while driving the car.

The Navigation System serves solely as an aid to

navigation. It never releases the drivers from their

duties to drive carefully and to make own judgement

in road traffic. Inaccurate or incorrect instructions

may happen to be given due to changing traffic

conditions. The actual road signs and traffic regulations

must therefore always be observed. In particular,

the Navigation System cannot be used as an aid to

orientation when visibility is poor.

This Navigation System must only be used for its

intended purpose. The volume of the car radio/

Navigation System must be adjusted so that external

noise is still audible.

Navigation guidance is performed, based on the

database, therefore, it may not be applicable to

the current situation because of changes in traffic

conditions (e.g. changes in tollroads, principal roads,

one-way traffic, or other traffic regulations). In this

case, observe the current traffic signs or regulations.

• Traffic signs should be observed carefully while

driving using the Navigation System. Navigation

System is only an aid. Driver must always decide

whether or not to heed the information provided.

JVC does not accept liability for erroneous data

provided by the Navigation System.

• Traffic guidance is restricted to passenger vehicles

only. Special driving recommendations and

regulations for other vehicles (e.g. commercial

vehicles) are not included.

• Do not operate the unit while driving.

Terms of license

You are granted a non-exclusive license to use the

database for your personal purposes. The present

license does not authorize the granting of sublicenses.

Use of the data is only permitted in this specific JVC

system. It is forbidden to extract or make further use

of significant parts of the database content, or to

duplicate, modify, adapt, translate, analyze, decompile

or reverse-engineer any part thereof.

WARNING:

Road traffic regulations always take priority when a

vehicle is being driven in traffic. Navigation System is

only an aid. Errors may occur in individual data items/

entries. At all times, the driver must decide whether or

not to heed the information provided.

JVC does not accept liability for erroneous data provided

by the Navigation System.

When replacing/rotating the tyres:

It is required to clear all the accumulated calibration

data which is important for accurate navigation. To

clear the data, perform <Reset Calibration Data>.

(☞ page 52)

On map updating

If “Your map data is more than one year old, and the

update may be available. For more information, please

visit www.jvc-exad.com” appears on the monitor, visit

<http://www.jvc-exad.com>.

For details about updating your unit, visit <http://

www.jvc-exad.com> (English website only).

NAVIGATION SYSTEM

KW-NX7000[E].indb 18KW-NX7000[E].indb 18 08.7.1 5:39:05 PM08.7.1 5:39:05 PM

NAVIGATION SYSTEM

19

ENGLISH

Basic operations

Your position

Current street

Current time

Speed limit on the current street

Scale

Direction

The map scrolls automatically so that your position is always at the centre of the map.

Icons on the map

Home (☞ pages 22 to 24)

Favourite points (☞ pages 22 to 24, 36)

POI (Point Of Interest) (☞ pages 30, 32

and 56)

TMC (☞ pages 45 and 57)

• Home and Favourite points icons are displayed when

registering home/favourite points or searching for a

destination.

• POI icons are displayed on the map when a group is

selected in the <POI Icon> setting (☞ page 51)

and the map scale is between 25 m and 400 m. (The

travel icons and leisure icons are displayed when the

map scale is between 25 m and 1 km.)

• The POI information of the selected travel or leisure

icon may not be displayed correctly when the System

displays the wide area of map. In this case, zoom in

the map to display the detailed map.

• TMC icons are displayed on the map when the

<Traffic Icon> setting is activated (☞ page 51)

and the map scale is between 25 m and 2.5 km.

• The information on the map (such as street name, the POI information, and speed limit) may not be always

displayed depending on the condition (for example, if the System does not have the information of the position).

KW-NX7000[E].indb 19KW-NX7000[E].indb 19 08.7.1 5:39:07 PM08.7.1 5:39:07 PM

20

ENGLISH

To scroll the map

The position you touched is centred on the map.

The map scrolls to the direction you are touching and

holding.

• Touch and hold the map to keep scrolling the map.

• The scrolling speed varies depending on the position

you are touching and holding:

– Inner area: slow

– Outer area: fast

To display your current

position

Direction and distance from

your current position

Displays current position

Scale buttons

Zoom in

Zoom out

To change the map scale

1 Touch the screen to display the operating

buttons.

• You can also display the buttons by moving your

hand close to the screen.

• The buttons disappear if no operation is done for

about 5 seconds.

2

• You can also select a scale directly by pressing one of

the scale buttons.

KW-NX7000[E].indb 20KW-NX7000[E].indb 20 08.7.1 5:39:08 PM08.7.1 5:39:08 PM

Page is loading ...

JVC EXAD KW-NX7000 Instructions Manual

Related papers

Other documents