Edison DJ PRO 6100+ Quick start guide

Brand: Edison

Model: DJ PRO 6100+

Type: Quick start guide

DJ PRO 6100+

QUICK START

POWER UP

= On Switch

= AC Power cord connection

DJ PRO 6100+

XLR SPEAKER CABLES – PLUG INTO BOTTOM FEMALE CONNECTION TO THE SPEAKER

CORRECT INPUT FOR MUSIC (SCRATCH

2500)

MIC 1

Input

ONLY!!!

MIC 2

Input

ONLY!!!

*It is OK to use Link Output

*DO NOT PLUG

SCRATCH 2500

INTO MIC 1 or MIC

2 Inputs –This will

cause Loud Static &

the Transformer to

OVERHEAT!!!

ACT1505 – Powered Speaker – DJ PRO 6100+

DJ PRO 6100+

TURN IT UP

Make sure Volume knobs are turned up.

DJ PRO 5000

Make sure all Volume is up turned up.

Master Volume -

Gain Channel 1 –

(Adds Distortion & Volume)

- Gain Channel 2

(Adds Distortion & Volume)

Channel 1 Volume Slide -

- Channel 2 Volume Slide

The X-Fader determines which side of the Scratch 2500 plays music through the Speakers – If both Channel Volumes are up the music should

bleed if positioned in the middle. Channel One will play with the X-Fader to the Left and Channel 2 will play when the X-Fader is to the Right

Edison Scratch 2500

Power

Cord

ON/OFF

Switch

Grounding Lug for

Turntable Connection

Recording /

Master Out (2)

Phono/

Line Two

Line One

& Two

Inputs

Phono/

Line One

Important – Only switch to Phono if you are hooking up additional

Turntables. When using the iPod Cable (3.5mm to Dual RCA) Please

make sure you flip the switch on top to line 1 or line 2.

DJ Mic XLR SPEAKER

CABLES GO HERE

Make sure you switch top Line Control

switches to Line (1) or Line (2) when

wanting the source of music to come from

the 3.5 to RCA cord in the back of the

Scratch 2500 (21 & 23 Below).

- *PLEASE DO NOT HAVE TOO MUCH FUN!!!

• (2) – High Powered Speakers

– Model No. ACT1505-2500

– 1200 Watts Peak; 600 Watts

Continues

– Connections; RCA/ ¼” / XLR

– Two microphone inputs on each

speaker

 (2) – Tripod Speaker Stands

• Model No. ST102

 (2) – XLR Professional Speaker Cables

• Model No. XLR15

 (1) – Console Performing Stand

• Model No. XT1000

 (1) – Dual CD/USB Player

 Model No. Scratch 2500

– Features Digital Scratch and seamless song

transitions

DJ PRO 6100+ Includes

 (1) – 3.5MM to Dual RCA Cable

• Model No. 352RCA

• Used to hook up phones &

computers.

 (1) – Monitoring Headset

• Model No. H1000

 (1) – LED Disco Light

• Model No. RGB004

• Sound Activated with different

settings

 (1) – BONUS – PARTY STROBE LIGHT

• Model No. SSDL-STROBE

• Settings on back allow for different

speed variations

 (1) – Professional Wired Microphone

Model No. FM58

 (1) – Console Carrying Case for Scratch 2500

Model No. SC200

Accessories are inside at time of purchase

Edison DJ PRO 6100+ Quick start guide

Edison DJ PRO 6100+ Quick start guide

Edison DJ PRO 6100+ Quick start guide

Other documents