Arctic Protection Film User manual

Brand: Arctic

Model: Protection Film

Category: Screen protectors

Type: User manual

This manual is also suitable for

Protection Film for iPad 2

Arctic Protection Film for iPad 2 is an easy-to-apply, self-adhesive film that shields your iPad screen from scratches and smudges. Installation is simple: clean the screen, use the included applicator to smooth out any air bubbles, and remove the protective mask. The film can be reapplied if needed.

5 Clean the screen thoroughly with the

cleaning cloth.

Application of Protection Film for iPad 2

Peel off the mask completely.Peel off the mask completely.1 2①Use the sticker labeled ‘

mask' to peel off one-half of

the mask carefully and align

the exposed film onto the

screen. Never touch the

sticky surface of the

protection film.

①

User Manual

Protection Film for iPad 2

Bedienungsanleitung: www.arctic.ac/fileadmin/pfipad2/manual_de.pdf

Manuel de l'utilisateur: www.arctic.ac/fileadmin/pfipad2/manual_fr.pdf

Manual del usuario: www.arctic.ac/fileadmin/pfipad2/manual_es.pdf

Manual do Utilizador: www.arctic.ac/fileadmin/pfipad2/manual_pt.pdf

Användarmanual: www.arctic.ac/fileadmin/pfipad2/manual_se.pdf

Návod pro uživatele: www.arctic.ac/fileadmin/pfipad2/manual_cz.pdf

Használati útmutató: www.arctic.ac/fileadmin/pfipad2/manual_hu.pdf

Instrukcja obsługi: www.arctic.ac/fileadmin/pfipad2/manual_pl.pdf

Gebruikershandleiding: www.arctic.ac/fileadmin/pfipad2/manual_nl.pdf

EQUIPMENT

Package Contents

Applicator Card x 1Microfiber

Cleaning Cloth x 1

Protection Film x 1

Preparation

Clean the screen thoroughly with the cleaning cloth. 1 2 Use a tape to remove any dust particles on the screen.

43 Use the applicator card to eliminate any

air bubble.

②Use the sticker labeled ‘ mask' to

peel off the mask.

②

No part of this manual including the products described in it, may be reproduced, transmitted, stored in a retrieval system, or translated into any language in

any form or by any means, except documentation kept by the purchaser for backup purpose, without the express written permission of ARCTIC (HK) Ltd. In no

event shall ARCTIC its directors or employees be liable for any indirect damages, incidental or consequential damages arising from any defect or error in this

manual or product.

Huobstrasse 4, 8808 Pfäffikon, Switzerland

www.arctic.ac

Re-apply

Lift the film off the screen by pulling on the tape. 1 2Place a piece of tape on the corner of the film.

3 4

5 6

Remove the tape from the film carefully.Use a different piece of tape to remove any dust off the screen.

Use the applicator card to eliminate any air bubble. Clean the screen thoroughly with the cleaning cloth.