Setup
Installation
Instalación
Logitech
®
Pure-Fi Elite
™
www.logitech.com
User’s Guide
English
Deutsch
Français
Italiano
Español
Português
Nederlands
Svenska
Dansk
Norsk
Suomi
Ελληνικά
По-русски
Magyar
Česká verze
Po polsku
620-000474 Pure-Fi Elite_MNL.ind1 1620-000474 Pure-Fi Elite_MNL.ind1 1 11.2.2008 13:10:5011.2.2008 13:10:50
English
1
English
2
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
• Do not push objects into apparatus vents or slots because fire
or electric shock hazards could result.
• Maintain a minimum distance of at least 6 inches around
apparatus for sufficient ventilation.
• Ventilation should not be impeded by covering the ventilation
openings with items, such as newspapers, table clothes,
curtains, etc.
• No naked (open) flame sources, such as lighted candles,
should be placed on or near the apparatus.
• Place apparatus in a stable location so it will not fall causing
product damage or bodily harm.
• Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
• Do not defeat the safety purpose of the polarized plug.
A polarized plug has two blades with one wider than the other.
The wide blade is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
• Operate the apparatus only from a low level audio line output.
• Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused
for long periods of time.
• Refer all servicing to qualified service personnel.Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
• The apparatus shall be disconnected from the mains
by placing the power/standby switch in the standby position
and unplugging the power cord of the apparatus from the AC
mains receptacle.
• The socket-outlet shall be installed near the equipment and shall
be easily accessible.
• AM and FM antenna connections are only intended for use
with applicable antennas provided. Do not connect to any
other antenna.
• Never connect an outdoor antenna to this product.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE.
IMPORTANT SAFETY INFORMATION
CAUTION
ELECTRIC SHOCK HAZARD
Welcome
Safety Information
Welcome
Thank you for purchasing your new Logitech
®
Pure-Fi Elite
™
. Your Pure-Fi Elite
™
is a high-fi delity, all-in-one
speaker system designed for the Apple iPod
®
.
To set up your Pure-Fi Elite
™
system, do the following (see the Quick Start Guide included in your Pure-Fi Elite
™
package for more details):
1. Attach a Universal Dock adapter.
2. Attach the antennas.
3. Attach the remote holder.
4. Plug it in.
5. Complete the Guided Setup.
Pure-Fi Elite™
MENU
Pure-Fi Elite™
Placed on the product to mean...
Caution, refer to accompanying documentation
before proceeding. This symbol would then be located
in the manual section adjacent to the marking that
refers tothe area of concern.
Placed on the product to mean...
Warning, access to this area is restricted. Failure to
comply could result in an electrical shock hazard.
EXPLANATION OF SYMBOLS:
620-000474 Pure-Fi Elite_MNL.indSec1:1-Sec1:2 Sec1:1-Sec1:2620-000474 Pure-Fi Elite_MNL.indSec1:1-Sec1:2 Sec1:1-Sec1:2 11.2.2008 13:10:5211.2.2008 13:10:52
English
3
English
4
Feature Function
1. Power (
)
Toggle power
2. Volume (
/
)
Adjust volume
3. SRC button Switch source input
4. iPod, AM, FM, aux Switch source input
5. Select
(
)
Switch current display / advance menu
6. (
) Adjust radio / change iPod track
7. Preset buttons Switches to a preset playlist / radio station
8. Shuffl e
(
)
Adjusts iPod shuffl e state
9. Repeat ( ) Adjusts iPod repeat state
10. Time Set
(
)
Adjust the clock time
11. (
) Pause iPod / mute speaker
12. Sleep Activates the sleep timer
13. StereoXL
( )
Activate StereoXL
14. Menu
(
)
Go to speaker menu
15. Remote sensor Receive signals from remote
Getting to know your Pure-Fi Elite
™
Getting to know your Pure-Fi Elite
™
Getting to know your Pure-Fi Elite
™
sleep
ipod
am
aux
1
23
4
5
6
fm
123
4
56
7
8
9
10
11
12
13
14
15
6
5
1
2
2
620-000474 Pure-Fi Elite_MNL.indSec1:3-Sec1:4 Sec1:3-Sec1:4620-000474 Pure-Fi Elite_MNL.indSec1:3-Sec1:4 Sec1:3-Sec1:4 11.2.2008 13:10:5311.2.2008 13:10:53
English
5
English
6
2:30
FM
107. 5 MHz
Listening to Your iPod
To listen to your iPod:
1. Plug your iPod into the Universal Dock.
2. Use the iPod menu to select the songs you want to listen to.
3. Press Play on your iPod.
Pure-Fi Elite
™
will automatically turn on, switch to the iPod input and start playing.
Note: You can navigate through your playlist directly on the iPod or by using (
, ,
) on
the remote.
iPod Playlist Presets
To save an iPod playlist as a preset:
1. Press ‘iPod’ to switch to the iPod input.
2. Press and hold the desired preset button (1, 2, 3, 4, 5, or 6) for 1 second.
3. Use (
) or ( / ) to select a playlist. Press select ( ).
4. Use (
) or ( / ) to select whether the playlist should be shuffled. Press select ( )
to accept the selection.
To play an iPod playlist preset:
1. Press ‘iPod’ to switch to the iPod input.
2. Press the desired preset button (1, 2, 3, 4, 5, or 6).
Note: Your Pure-Fi Elite
™
remembers iPod playlist presets by the name of the playlist. If you have
multiple iPods with the same playlist names, your iPod playlist presets will work with all of your iPod
devices.
Getting to know your Pure-Fi Elite
™
Getting to know your Pure-Fi Elite
™
Operating the Radio
Your Pure-Fi Elite
™
includes both AM and FM radios.
To listen to the radio:
1. Press the ‘AM’ or ‘FM’ button to switch to the
desired radio band.
2. Use ( ) or ( / ) to change the station.
Note: To automatically scan for the next station, press
and hold ( / ) until you hear a beep.
Radio Presets
To save a station as a preset:
1. Change to the desired station.
2. Press and hold the desired preset button
(1, 2, 3, 4, 5, or 6) for 1 second.
To change to a preset station:
1. Press ‘AM’ or ‘FM’ to switch to the desired radio
band.
2. Press the desired preset button (1, 2, 3, 4, 5, or 6).
RDS Information
Many FM stations broadcast RDS information – which
includes the station call letters and text information
(such as the current song). To view RDS information:
1. Change to the desired FM station.
2. Press select (
) several times — until the RDS
information appears.
Note: Not all stations broadcast RDS information.
If the RDS information does not appear when expected,
the station is not broadcasting it.
107.5 MHz
WPOD-FM
Rock - Looks Good
2:30
FM
620-000474 Pure-Fi Elite_MNL.indSec1:5-Sec1:6 Sec1:5-Sec1:6620-000474 Pure-Fi Elite_MNL.indSec1:5-Sec1:6 Sec1:5-Sec1:6 11.2.2008 13:10:5411.2.2008 13:10:54
English
7
English
8
Using the Auxiliary Input
To use the 3.5mm auxiliary input:
1. Connect your source device to the auxiliary input.
2. Press ‘aux’ to switch to the aux input.
3. Press Play on your source device.
Note: Depending on your source device, you may need
to purchase an adapter cable.
Adjusting the Volume
To adjust the system volume:
1. Use (
/
) or the ( - / + ) buttons on
the remote.
To mute the volume:
1. Use (
) on the remote.
Note: When listening to the iPod, pressing (
) will
also pause the iPod.
Setting the Clock
When turned off, Pure-Fi Elite
™
will display the current
time in a large screen format.
To activate the large clock display while Pure-Fi Elite
™
is on:
1. Tap select ( ) several times — until the large
clock display appears.
To set the current time:
1. Press and hold the time
(
)
set button for
1 second.
2. Use ( / ) to change the time. Press select
(
) to accept the change.
Note: When viewing other display screens (such as
the iPod track display or radio frequency), the clock is
displayed in the upper-left corner of the display.
Display Screens
Depending on your preference, Pure-Fi Elite
™
can display
many different types of information. The following
display screens are available:
1. Radio Frequency (radio only)
2. RDS Information (FM radio only)
3. Clock (all inputs)
4. Spectrum Analyzer (all inputs)
To switch between the different screens, press
select (
).
Sleep Timer
Pure-Fi Elite
™
includes a sleep timer that will
automatically turn Pure-Fi Elite
™
off after a set period
of time.
To activate the sleep timer, press ‘sleep’ on the remote.
To increment the timer, press ‘sleep’ repeatedly – until
the desired time is reached.
You can turn off the sleep timer in one of two ways:
• Press ( ). This will also turn Pure-Fi Elite
™
off.
• Repeatedly press ‘sleep’ until the display reads
‘Off’. This will leave Pure-Fi Elite
™
on.
Getting to know your Pure-Fi Elite
™
Getting to know your Pure-Fi Elite
™
iPod
Volume
2:30
FM
107. 5 MHz
107.5 MHz
WPOD-FM
Rock - Looks Good
2:30
FM
FM
2:30
iPod
Sleep Timer
60 minutes
60
FM
1.
2.
3.
4.
FM
620-000474 Pure-Fi Elite_MNL.indSec1:7-Sec1:8 Sec1:7-Sec1:8620-000474 Pure-Fi Elite_MNL.indSec1:7-Sec1:8 Sec1:7-Sec1:8 11.2.2008 13:10:5511.2.2008 13:10:55
English
9
English
10
Speaker Menu
Your Pure-Fi Elite
™
contains a menu that allows you to
adjust various settings to your personal preference.
To activate (or exit) the menu, press and hold select
(
) for 1 second or press menu ( ) on the
remote.
To adjust the active menu setting, use ( ) or
(
/ ).
To advance to the next menu setting, press select
( ).
The list of available menu options is:
1. Bass Level: Adjusts the amount of bass.
2. Treble Level: Adjusts the amount of treble.
3. Brightness (on): Adjusts the brightness level
of the display and buttons when Pure-Fi Elite
™
is on.
4. Brightness (off): Adjusts the brightness level
of the display and buttons when Pure-Fi Elite
™
is off.
5. iPod Backlight: Adjusts the behavior of the iPod
backlight. Options include: the default iPod
behavior (‘On Keypress’) and on while playing.
6. Clock Format: Change the clock display format
(12 or 24 hour).
7. Select Language: Change the language used in
the Pure-Fi Elite
™
menus.
Other Features
Charging Your iPod
Your iPod battery will charge automatically when your iPod
is in Pure-Fi Elite
™
’s Universal Dock.
Shuffle Mode
The shuffle button will switch the iPod’s shuffle mode on
and off. The shuffle indicator on the iPod display (
)
illuminates when in shuffle mode.
Repeat
The repeat button changes the current iPod repeat
state. Options are repeat off, repeat all, and repeat one.
The repeat indicator on the iPod display illuminates when in
repeat all (
) or repeat one ( ) modes.
StereoXL
Pure-Fi Elite
™
includes a proprietary ‘StereoXL’ feature that
dramatically widens the sound stage beyond the physical
boundaries of the speaker. To turn StereoXL on and off,
use the StereoXL button (
) on the remote.
MENU
Getting to know your Pure-Fi Elite
™
Getting to know your Pure-Fi Elite
™
FM
iPod
Bass
+
_
2:30
iPod
Treble
+
_
2:30
StereoXL Indicator
1.
2.
3.
4.
5.
6.
7.
iPod
Brightness (on)
iPod
Brightness (off)
iPod
iPod Backlight
Always On
iPod
Clock Format
12 hr
iPod
Select Language
English
Video Pass-thru
If you have an iPod with photo or video capabilities, you can use your Pure-Fi Elite
™
to display your photos
or videos on an external TV. To do so.
1. Connect one end of a composite or S-video cable to the back of your Pure-Fi Elite
™
.
2. Connect the other end of the cable to your TV.
3. Only use one video out jack at a time.
Note: Video pass-thru works with iPod with video (5G) only.
620-000474 Pure-Fi Elite_MNL.indSec1:9-Sec1:10 Sec1:9-Sec1:10620-000474 Pure-Fi Elite_MNL.indSec1:9-Sec1:10 Sec1:9-Sec1:10 11.2.2008 13:10:5711.2.2008 13:10:57
English
11
English
12
Acoustic Features
The Pure-Fi Elite
™
system uses an advanced, high-fidelity acoustic design. The acoustic system uses:
• (2) 1” ventilated soft-dome tweeters
• (2) 4” reinforced high-power, long-throw, polypropylene woofers
Pure-Fi Elite
™
’s sound field can be adjusted to your personal listening preferences — using the bass,
treble and StereoXL adjustments described above.
Getting to know your Pure-Fi Elite
™
Troubleshooting
My iPod is in the Dock and playing, but I can’t hear any music.
• Make sure that Pure-Fi Elite
™
is on.
• Make sure that the iPod input is selected.
• Make sure that the volume level on Pure-Fi Elite
™
is at least half way up. Use ( / ) on the speaker
to adjust.
• Try turning off the Sound Check feature on your iPod.
• Download the latest version of iTunes (available at apple.com) and upgrade your iPod to the
latest iPod fi rmware.
• To test the iPod output, try with headphones.
There isn’t a Universal Dock adapter for my iPod.
• If you have a newer iPod, a Universal Dock adapter for your iPod should have been included with your iPod
when you purchased it.
• If you have a 1st, 2nd, or 3rd generation iPod, you need to use the Aux input connector on the back of
Pure-Fi Elite
™
. (1st / 2nd generation iPod models do not have a dock connector. 3rd generation iPod models
are not supported by the Pure-Fi Elite
™
’s Universal Dock.)
The AM radio reception is poor.
• Use the external AM antenna.
• Make sure to disconnect the wires for the internal AM antenna before connecting the external antenna.
The FM radio reception is poor.
• Use the external FM antenna.
• Make sure that the antenna is fully extended. Leaving the antenna coiled up will result in poor reception
Music played through the Aux input sounds distorted.
• Make sure the cable is completely plugged into Pure-Fi Elite
™
and your source device.
• Turn down the volume level on your source device.
The remote isn’t working.
• Point the remote directly at Pure-Fi Elite
™
.
• Make sure the remote sensor isn’t being blocked. (It is located below the iPod.)
• Try using a fresh set of batteries.
Troubleshooting
620-000474 Pure-Fi Elite_MNL.indSec1:11-Sec1:12 Sec1:11-Sec1:12620-000474 Pure-Fi Elite_MNL.indSec1:11-Sec1:12 Sec1:11-Sec1:12 11.2.2008 13:10:5811.2.2008 13:10:58
13 14
The backlit controls are too bright / dim.
• Turn Pure-Fi Elite
™
on.
• Press menu (
) on the remote.
• Press select (
) twice - so ‘Brightness (on)’ appears.
• Use (
) or ( / ) to adjust the brightness level while Pure-Fi Elite
™
is on.
• Press select (
) - so ‘Brightness (off)’ appears.
• Use (
) or ( / ) to adjust the brightness level while Pure-Fi Elite
™
is off.
Will the iPhone work with Pure-Fi Elite
™
?
To use the iPhone with Pure-Fi Elite
™
, you will need to purchase a Universal Dock adapter from Apple.
When you connect your iPhone, your iPhone will present you with the option to go into Airplane Mode,
which turns off the communication capability of the iPhone while it is connected to the speaker. If you choose
not to enter Airplane Mode, you can make and receive calls, but you may experience some occasional audio
interference while listening to music.
The shuffl e and repeat buttons do not appear to work.
The buttons do function correctly. However, on some iPod models, the shuffl e or repeat indicators will not
appear on the iPod screen when you press the shuffl e or repeat button. They will only appear after the
song changes.
The video port doesn’t work.
The video port on the back of Pure-Fi Elite
™
only supports the “iPod with video” (or 5G) model. It does not
work with the iPod nano, iPod classic, iPod touch, or iPhone.
My iPod screen says “OK to disconnect” or “Accessory attached.”
Depending on your iPod model, these messages will appear when setting or playing iPod playlist presets.
Once you have set the preset – or the music has started playing – the iPod screen will return to normal.
For the most up-to-date troubleshooting information, visit www.logitech.com.
English English
Logitech Hardware Product Limited Warranty
Logitech warrants that your Logitech hardware product shall be free from defects in material and workmanship for two (2) years, beginning
from the date of purchase. Except where prohibited by applicable law, this warranty is nontransferable and is limited to the original purchaser.
This warranty gives you specific legal rights, and you may also have other rights that vary under local laws.
Remedies
Logitech’s entire liability and your exclusive remedy for any breach of warranty shall be, at Logitech’s option, (1) to repair or replace the hardware,
or (2) to refund the price paid, provided that the hardware is returned to the point of purchase or such other place as Logitech may direct
with a copy of the sales receipt or dated itemized receipt. Shipping and handling charges may apply except where prohibited by applicable
law. Logitech may, at its option, use new or refurbished or used parts in good working condition to repair or replace any hardware product.
Any replacement hardware product will be warranted for the remainder of the original warranty period or thirty (30) days, whichever is longer
or for any additional period of time that may be applicable in your jurisdiction.
This warranty does not cover problems or damage resulting from (1) accident, abuse, misapplication, or any unauthorized repair,
modification or disassembly; (2) improper operation or maintenance, usage not in accordance with product instructions or connection
to improper voltage supply; or (3) use of consumables, such as replacement batteries, not supplied by Logitech except where such restriction
is prohibited by applicable law.
How to Obtain Warranty Support
Before submitting a warranty claim, we recommend you visit the support section at www.logitech.com for technical assistance. Valid warranty
claims are generally processed through the point of purchase during the first thirty (30) days after purchase; however, this period of time may
vary depending on where you purchased your product – please check with Logitech or the retailer where you purchased your product for details.
Warranty claims that cannot be processed through the point of purchase and any other product related questions should be addressed directly to
Logitech. The addresses and customer service contact information for Logitech can be found in the documentation accompanying your product
and on the web at www.logitech.com/contactus.
Limitation of Liability
LOGITECH SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUDING BUT NOT
LIMITED TO LOSS OF PROFITS, REVENUE OR DATA (WHETHER DIRECT OR INDIRECT) OR COMMERCIAL LOSS FOR BREACH OF ANY EXPRESS OR IMPLIED
WARRANTY ON YOUR PRODUCT EVEN IF LOGITECH HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some jurisdictions do not allow
the exclusion or limitation of special, indirect, incidental or consequential damages, so the above limitation or exclusion may not apply to you.
Duration of Implied Warranties
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE ON THIS HARDWARE PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THE APPLICABLE LIMITED WARRANTY
PERIOD FOR YOUR PRODUCT. Some jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may
not apply to you.
National Statutory Rights
Consumers have legal rights under applicable national legislation governing the sale of consumer goods. Such rights are not affected by
the warranties in this Limited Warranty.
No Other Warranties
No Logitech dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty.
Logitech Address
Logitech Europe S.A., Z.I. Moulin du Choc D, 1122 Romanel/Morges, Switzerland
© 2008 Logitech. All rights reserved. Logitech, the Logitech logo, and other Logitech marks are owned by Logitech and may be registered.
All other trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in any manual
or on this website. Information contained herein is subject to change without notice.
iPod is a trademark of Apple, Inc., registered in U.S. and other countries.
620-000474 Pure-Fi Elite_MNL.indSec1:13-Sec1:14 Sec1:13-Sec1:14620-000474 Pure-Fi Elite_MNL.indSec1:13-Sec1:14 Sec1:13-Sec1:14 11.2.2008 13:10:5811.2.2008 13:10:58
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
620-000474
www.logitech.com/support
WWW
Location Hotline Technical Help
België / Belgique Dutch: +32-(0)2 200 64 44; French: +32-(0)2 200 64 40
hESKf2EPUBLIKA +420 239 000 335
Danmark +45-38 32 31 20
Deutschland +49-(0)69-51 709 427
España +34 -91-275 45 88
France +33-(0)1-57 32 32 71
Ireland +312-(0) 200 8433
Italia +39-02-91 48 30 31
-AGYARORSZfG +36-177-74 853
Nederland +31-(0)-20-200 84 33
Norge +47-(0)24 159 579
Österreich +43-(0)1 206 091 026
0OLSKA +48-22-854 11 51
Portugal +351-21-415 90 16
Russija +7(495) 641 34 60
Schweiz / Suisse D +41-(0)22 761 40 12; F +41-(0)22 761 40 16;
Svizzera I +41-(0)22 761 40 20; E +41 (0)22 761 40 25
South Africa 0800 981 089
Suomi +358-(0)9 725 191 08
Sverige +46-(0)8-501 632 83
4~RKIYE Check website
United Arab Emirates 800 441-4294
United Kingdom +44-(0)203-024-81 59
European., Mid. East., English: +41-(0)22 761 40 25
& African Hq. Romanel Fax: +41-(0)21 863 54 02
s/Morges, Switzerland
Eastern Europe English: 41-(0)22 761 40 25
620-000474 Pure-Fi Elite_MNL.indSec1:225 Sec1:225620-000474 Pure-Fi Elite_MNL.indSec1:225 Sec1:225 11.2.2008 13:12:2211.2.2008 13:12:22
/
