Sylvania SRTD219 Owner's manual

Brand: Sylvania

Model: SRTD219

Category: DVD players

Type: Owner's manual

WARNING: TO REDUCE THE RISK OF FIRE OP, ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE

TO P,AIN OP, MOIS'I URE.

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSON-

NEL.

The caution marking is located on the rear of tile cabinet.

THIS SYMBOL INDICATES THAT DAN-

GEROUS VOUIAGE CONSTITUTING A

RISK OF ELECTRIC SHOCK IS PRESENT

WITHIN THIS UNI'E

THIS SYMBOL INDICATES THAT THERE

ARE IMPORTANT OPERATING AND

MAINTENANCE INSTRUC'IqONS IN THE

LITERATURE ACCOMPANYING THE

APPLIANCE.

IMPORTANT SAFEGUARDS

l.Read instructions-All 1he safety and operating inslructions

sho_dd be read before the appliance is operated.

2.Retain Instructions-The safety and operating instructions

sho_dd be retained for f_ture refhrence.

3.Heed Warnings-All warnings on the appliance and in the

operating instructions should be adhered to.

4.Follow Instructions-All operating and use instructions

sho_dd be followed.

5.Cleaning-Unph_g TV/DVD f>om the wall o_tlet before

cleaning. Do not use liquid cleaners or aerosol cleaners. Use

a damp clolh for cleaning.

EXCEPTION: A product that is meant Ibe uninterrupted

service and, that for some specific reason, such as the possi-

bility of the loss of an authorization code for a CATV con-

verter, is not intended to be _mph_gged by the user for clean-

ing or any other purpose, may exclude the re|brence to

unplugging the appliance in the cleaning description other-

wise required in item 5.

6.Attachments-Do not use attachments not recommended by

the TV/DVD manufacturer as they may cause hazards.

7.Water and Moisture-Do nol _se this TV/DVD near water-

for example, near a bath lub, wash bowl, kitchen sink, or

laundry lub, in a wet basement, or near a swimming pool,

and Ihe like.

8.Accessories-Do not place this TV/DVD on an unstable cart,

stand, tripod, bracket, or table. The TV/DVD may I3ll, caus-

ing serious injury to someone, and serious damage to Ihe

appliance. Use only with a carb stand, tripod, brackeb or

table recommended by Ihe mamd_cturer, or sold with Ihe

TV/DVD. Any mo_mting of the PORTABLECARTWARNING

appliance sho_dd lbllow the manu- AVERTESSEM£NTPOURUNE

TABLE ROULANTE PORTATIVE

fhcturer's instruclions and should use

a nlounting accessory recommended

by the manufacturer. An appliance

and cart combination sho_dd be

moved with care.

Quick stops, excessive force, and

uneven surfaces may ca_lse the appli-

ance and cart combination to over-

t_wn.

-2-

Accessoires- Ne placez pas cette TV/DVD sur _me table

ro_dame, _m support, ml tr6pied, une console ou une table

inslable. Cette TV/DVD risq_mrait de tornbel; po_vant

gravement blesser quelq_{_m et I'appareil m_.me pourrait

_.tre s6rieusement endommag6. N'_tilisez qu'mle table

ro_danm, _m support, ml tr6pied, une console ou une table

recommand6 par le fabriquant, o_ vendu avec la TV/DVD.

Pour n'importe quelle installation de l'appareil, on devra

suivre les instructions du fabriquant et l'on devra utiliser les

accessoires d'installation recommand6s par le fabriquant.

L'ensemble combin6 de l'appareil avec une table roulante

devra _n'e d6plac6 avec prdcaution. Des arr_ts brusq_es,

une force excessive et des surfaces in6gales peuvent provo-

quer le renversement de l'ensemble cornbin6 de

l'appareil/table roulame.

9. Ventilation-Slots and openings in the cabinet and the back

or bottom are provided for ventilation and to ens_we reliable

operation of the TV/DVD and to protect it from overheat-

ing, and these openings must not be blocked or covered.

The openings sho_dd never be blocked by placing the

TV/DVD on a bed, solh, rag, or other similar surface. This

TV/DVD should never be placed near or over a radiator or

heat regisler. This TV/DVD sho_dd not be placed in a built-

in installation such as a bookcase or rack _mless proper

ventilation is provided or the manufacturer's instructions

have been adhered to.

10.Power Sources-This TV/DVD sho_dd be operated only

from the type of power source indicated on the marking

label. If you are not sure of the type of power supply to

your home, cons_dt yo_w appliance dealer or local power

company. For TV/DVDs intended to operate I>om battery

power, or other sources, refer to the operating instructions.

ILGrounding or Polarization-This TV/DVD is eq_dpped

with a polarized alternating-current line plug(a plug having

one blade wider than the other). This plug will fit into the

power o_tlet only one way. This is a salbty lbat_re. If you

are _mable to insert the ph_g f_dly into the outlet,/ry revers-

ing the ph_g. If the ph_g should still fail to fit, contact your

elec/rician to replace your obsolete outlet. Do not dell:at the

safety purpose of the polarized ph_g.

0C28

FIGURE A

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

LEADIN

WIRE

NEC NATIONALELECTRICAL CODE

S2898A

12.Power-Cord Protection-Power-supply cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying par-

ticular attention to cords at plugs, convenience receptacles,

and tile point where they exit from tile appliance.

13.Outdoor Antenna grounding-If an outside antenna o1"

cable system is connected to the TV/DVD, be sure the

antenna or cable system is grounded so as to provide some

protection against voltage surves and built-up slafic

charges. Article 810 of the National Electrical Code,

ANSI/NFPA No. 70, provides inlol_ma/ion with respect to

proper grounding of the mast and s_ppolaing sm_ctere,

grounding of tbe lead-in wire to an antenna discharge unit,

size of gro_mding conductors, location of antenna-discharge

_mit, connection to grounding electrodes, and requirements

for the gro_mding electrode. (Fig. A)

14.Lightning-For added protection for this TV/DVD receiver

d_ring a lightning storm, or when it is lefi una/tended and

_mused l_r long periods of time, unplug it from the wall

o_tlet and disconnect the antenna or cable system. This will

prevent damage to the TV/DVD due to lighming and

power-line sulges.

15.Power Lines-An outside antenna system sho_dd not be

located ill tile vicinity of overhead power lines or other

electric light or power circuits, or where it can Pall into

such power lines o1"circ_dts. When installing an outside

antenna system, extreme care sho_dd be taken to keep from

touching such power lines or circ_dts as contact with them

might be Pata].

16.Overloading-Do not overload wall o_=tlets and extension

cords as this can result ill a risk of fire or elec/ric shock.

17.Object and Liquid Entry-Never push objects ol_any kind

into this TV]DVD through openings as they may touch dan-

gero_=s voltage points or short out parts that could res_dt in

a fire or electric shock. Never spill liq_dd of any kind on

the TV/DVD.

18.Servieing-Do not attempt to service this TV/DVD yourself

as opening or removing covers may expose you to danger-

o_=svoltage or other hazards. Refer all servicing to qualified

service personnel

19.Damage Requiring Service-Unplug this TV/DVD from

the wall omlet and relEr servicing to qualified service per-

sonnel _mder the Ibllowing conditions:

a. When the power-supply cord o1"pb_g is damaged or frayed.

b. If liq_dd has been spilled, or objects have Pallen into the

TV/DVD.

c. If the TV/DVD has been exposed to rain or watel_

d. If the TV/DVD does not operate normally by lbllowing the

operating inslructions. Adjust only those controls that are

covered by the operating insm_ctions, as improper adiust-

mere of other con/rols may result in damage and will ofien

req_dre extensive work by a qualified technician to restore

the TV/DVD to its normal operation.

e. If the TV/DVD has been dropped o1"damaged in any way.

f- When the TV/DVD exhibits a dislinct change ill perlbr-

mance-this indicates a need for service.

20.Replacement Parts-When replacement parts are required,

be sure the service teclmician has used l_placement parts

specified by the manuPacterer that have the same character-

istics as the original part. Unauthorized substit_tions may

result ill fire, elec/ric shock, inj_ry to persons or other haz-

ards.

21.Safety Cheek-Upon completion of any service or repairs to

this TV/DVD, ask the service technician to perl_rm routine

sal_ty checks to determine that the TV/DVD is in proper

operating condition.

22.Heat-This TV/DVD product should be sit_mted away from

heat sources s_ch as radiators, heat registers, stoves, or

other producers (including amplifiers) that produce heat.

- 3 - EN

0C28

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public perlbr-

mance and lending of discs are prohibited,

FCC WARNING- This equipment may gener-

ate or use radio frequency energy. Changes or

modifications to this equipment may cause

harmful interference unless the modifications

are expressly approved in the instruction man-

ual. The user could lose the authority- to oper-

ate this equipment if an unauthorized change

or modification is made.

RADIO-TV INTERFERENCE

This equipment has been/ested and tbund to com-

ply with the limits for a Class B digital device, pur-

suant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable prolection against

harmful in/erference in a residential installation.

This equipment generates, uses, and can radiate

racfio frequency energy and, if not installed and

used in accordance with the instructions, may cause

harmful inlerference lo radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful intertlerence to

radio or television reception, which can be deter-

mined by turning the equipment off and on, the

user is encouraged to try to correct the interfer-

ence by one or more of the following measures:

1) Reorient or relocate the receiving anlenna.

2) Increase the separation between the equipment

and receiver.

3) Connect the equipment into an outlet on a cir-

cuit different from that to which the receiver is

connecmd.

4) Consult the dealer or an experienced radio!TV

technician for help.

LASER SAFETY

This unit employs a laser, Only a qualified service

3erson should remove the cover or attempt to ser-

vice this device, due to possible eye injury;

CAUTION: USE OF CONTROLS OR ADJUST-

MENTS OR PERFORMANCE OF PROCE-

DURES OTHER THAN THOSE SPECIFIED

HEREIN MAY RESULT IN HAZARDOUS

RADIATION EXPOSURE.

CAUTION: VISIBLE AND INVISIBLE LASER

RADIATION WHEN OPEN AND INTERLOCK

DEFEATED. DO NOT STARE INTO BEAM.

LOCATION: INSIDE, NEAR THE DECK

MECHANISM.

This Class B digital apparatus complies with

Canadian ICES-003.

Cet appareil num_rique de la classe B est con-

forme ii la norme NMB-003 du Canada.

CAUTION: TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO WIDE

SLOT, FULLY INSERT.

ATTENTION: POUR I_VITER LES CHOC

ELECTRIQUES, INTRODUIRE LA LAME LA

PLUS LARGE DE LA FICHE DANS LA

BORNE CORRESPONDANTE DE LA PRISE

ET POUSSER JUSQU'AU FOND,

- 4 - EN

0c28

Forsafeoperationandsatisfactoryperformanceof

yourTV/DVD,keepthefollowinginmindwhen

selectingaplaceforitsinstallation:

• Shieldit fromdirectsunlightandkeepitawayfrom

sourcesofintenseheat.

• Avoiddustyorhumidplaces,

• Avoidplaceswithinsufficientventila/ionforproper

healdissipa/ion.Donotblocktheventila/ionholesa/

thetopandbollomoflheunit.Donotplace1heunit

onacarpetbecausethiswillblock1heventila/ion

holes.

• Installunitinahorizontalposition.

• Avoidlocationssubjecttostrongvibration.

• DonotplacetheTViDVDnearstrongmagneticfields,

• AvoidmovingTV/DVDtolocationswheretemper-

aturedifti_rencesareextreme,

Moisturecondensationmayoccurinsidetheunit

whenitismovedfromacoldplacetoawarmplace,

oraflerheatingacoldroomorunderconditionsof

highhumidity,If aDVDisplayedinaTV/DVD

whichhasmoisture,itmaydamagetheDVDand

TViDVD.Thereforewhenthecondensationoccurs

insidetheunit,turnthePOWERbuttononandallow

atleast2hoursfortheunittodryout.

• Do not handle the power cord with wet hands,

• Do not pull on the power cord when disconnecting

it from an AC wall outlet. Grasp it by the plug.

• If, by accident, waler is spilled on your unit, unplug

the power cord immedia/ely and take the unit to our

Aulhorized Service Center for servicing,

• Do not put your fingers or objects into the

TViDVD disc loading tray;

• Do not place anything directly on top of the unit,

A NOTE ABOUT RECYCLING

This product's packaging ma/erials are recyclable and can be reused. Please dispose of any malerials in

accordance wilh your local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regula-

tions concerning chemical wastes.

The serial num_r of this product may be found on the back of the unit. No other TViDVD has the same serial

number as yours, You should record the number and other vital information here and retain this book as a per-

manent record of your purchase to aid identifica/ion in case of theft. Serial numbers are not kept on file,

Date of Purchase

Dealer Purchase from

Dealer Address

Dealer Phone No.

Model No,

Serial No.

- 5 - EN

0C28

TABLE OF CONTENTS

• IMPORTANT SAFEGUARDS ............. 2

• PRECA UTIONS ........................ 4

LOCATION ............................ 5

AVOID THE HAZARDS OF ELECTRICAL

SHOCK AND FIRE ...................... 5

WARNING ............................ 5

• FEATURE'S ............................ 7

• SUPPLIED ACCESSORIES ............... 7

• OPERATING CONTROLS AND FUNCTIONS 8

• PREPARATION FOR USE ............... 10

ANTENNA/CABLE CONNECTIONS ....... 10

INSTALLING THE BATTERIES ........... 12

CONNECTING TO EXTERNAL INPUT JACKS .12

CONNECTING TO A STEREO SYSTEM (for DVD) .13

CONNECTING TO AN AMPLIFIER

EQUIPPED WITH DIGITAL INPUT JACKS.

MD DECK OR DAT DECK (for DVD) ...... 13

CONNECTING TO A DOLBY DIGITAL

DECODER OR DTS DECODER (for DVD) .14

TV SECTION

• SET UPFOR USE ..................... 15

LANGUAGE SELECTION ............... 15

CHANNEL PRESETTING ............... 15

• OPERATIONS ......................... 16

WATCHING A TV PROGRAM ............ 16

SELECTING THE SLEEP TIMER ......... 16

CLOSED CAPTION .................... 16

PICTURE ADJ USTMENT ................ 17

V-CHIP SET UP ........................ 18

DVD SECTION

• ABOUT THE DISCS .................... 20

PLAYABLE DISCS ..................... 20

DISC TYPES .......................... 20

SYMBOLS USED IN THIS MANUAL ...... 20

• PLAYING A DISC ...................... 21

PLAYING A DVD VIDEO OR AN AUDIO CD .21

USING THE DVD MENUS ............... 21

USING THE TITLE MEN U ............... 22

PAUSING PLAYBACK OR DISPLAYING

A STILL PICTURE ..................... 22

RESUMING PLAYBACK FROM THE

POINT WHERE PLAYBACK STOPPED .... 22

STEPPING THROUGH FRAMES .......... 22

FAST FOP, WARD/REVERSE ............. 23

SLOW MOTION ....................... 23

STARTING FROM A DESIRED TRACK .... 23

STARTING FROM A DESIRED TIME COUNT .23

PLAYING FROM A DESIRED TITLE OR

CHAPTER ............................ 24

RANDOM (Audio CD) .................. 24

REPEAT ............................. 24

A-B REPEAT .......................... 25

PROGRAM (Audio CD) ................. 25

• SETTINGS ........................... 26

CHANGING THE AUDIO LANGUAGE OR

SOUND MODE ........................ 26

CHANGING THE SUBTITLE LANGUAGE . .27

CHANGING THE CAMERA ANGLE

(Multi-Angle Pictures) ................... 27

CHANGING THE ON-SCREEN DISPLAY...28

• CHANGING THE SETUP ITEMS ......... 29

LANGUAGE SETTINGS ................ 29

VIDEO SETTINGS ..................... 30

AUDIO SETTINGS ..................... 30

PARENTAL LOCK ..................... 31

OTHER SETTINGS ..................... 32

• LANGUAGE CODE LIST ................ 33

• TROUBLESHOOTING GUIDE ........... 34

• MAINTENANCE ....................... 37

DISC HANDLING ...................... 37

• SPECIFICATIONS ..................... 38

• WARRANTY ................... Back Cover

- 6 - EN

0c28

• Tinted, Bright Black Matrix Picture Tube

• 181 Channel Selection

All VHF/UHF channels plus up to 125 cable channels.

• PLL Frequency Synthesized Tuning

The la/est PLL frequency synthesized electronic tuning

system provides free and easy channel selection, and lets

you tune directly to any channel using the channel number

buttons (0-9 and +10%key) on the remote control.

• On-Screen Function Display.

• Full-Function Remote Control

• Sleep Timer

• Closed Caption Decoder

You may view specially labeled (cc) TV programs,

movies, news, prerecorded tapes, etc. with either a

dialogue caption or text display added to the program.

• Auto Shut Off Function

If there is 11oair signal input from the antenna terminal and

no operation for 15 minutes, the TV will turn itself off

automatically.

• V-CHIP

Enables parents to prevent their children from watching

inappropriate material on TV.

• Dolby Digital sound

This player can handle Dolby Digital surround sound

having 5.1 channels when connected to a Dolby Digital

decoder.

• Still/fast/slow/step playback

Various playback modes are available including still pic-

tures, fast forward/reverse, slow motion and step flmnes.

• Random playback for audio CD

This player can shuffle the order of tracks to play them in

random order.

• Program playback for audio CD

You can program the order of tracks to play them in any

desired order.

• DVD menus in a desired language

You can display DVD menus in a desired language, if

available on a DVD,

• Screen saver/Auto power-off functions

The screen saver program starts when there is no input

from the player for five minutes in the stop mode. When

the screen saver program is activated for 30 minutes, the

power is automa/ically turned off.

• Subtitles in a desired language

You can select a desired language for the display subtitles,

if that language is available on a disc.

• Selecting a camera angle

You can select the desired camera angle, if a disc contains

sequences recorded from different angles.

• Choices for audio language and sound mode

You can select the desired audio language and sound

mode, if different languages and modes are available on a

disc.

• Parental lock

You can set the control level to limit playback of discs

which may not be suitable for children.

• Automatic detection of discs

_fis player automatically detects if a loaded disc is DVD

or audio CD.

• On-screen display

Information about the current operation can be displayed

on a TV screen, allowing you to confirm the currently

active functions (such as program playback), on the TV

screen using the remote control.

• DTS (Digital Theater System)

Sound system different from Dolby Digital sound system

• Search

Chapter search: Search for the chapter designated by user

is possible.

Title search: Search for the title designated by user is

possible.

'Dack search: Search for the track designated by user is

possible.

Time search: Search for the time designated by user is

possible.

• Repeat

Chapter: Repealed playback of the chapter of the

disc being played is possible.

Title: Repeated playback of the title of the disc

being played is possible.

'll-ack: Repeated playback of the track of the disc

being played is possible.

Disc(audio CD): Repeated playback of the entire disc being

played is possible.

A-B: The pan between A and B designated by

user is possible.

• Zoom

4-time magnified screen can be displayed.

• Marker

_le pmt designa/ed by user can be called back.

• Resume Play

User can resume to playback from the part at which the

play was stopped.

• SRS TruSurround

You can enjoy stereophonic virtual space on your existing

stereo system.

• Bit rate indication

• Dynamic range control

This unit employs TruSurround system

l"I'U_lil'lNlllJnd" of SRS Labs, lnc. as virtual

_IIISCO)"

technology.

TruSmTound and the CO)" symbol are trademarks of

SRS Labs, lnc.

TruSurround technology is incorporated under license

fiom SRS Labs, Inc.

- 7 - EN

0C28

OPERAFING CONTROLS AND FUNC FIONS

[TV/DVD FRONT PANEL ] [Fig. 11

2 3 4 5 6 7 8 91011 1213 14

[ REMOTE CONTROL I [Fig. 21

..............

6 ................

16 ................

17 .........

18 ................

10 ..............

................

12 -_

3 --

20"--

21 ..........

5 _

4 ....

25--

.......13

--6

--5

.... 5

...........11

--33

--_28

--_ 27

1.Disc loading tray

2.VIDEO input jack

Connect to the video output jack of a video

camera or VCR.

3.AUDIO L/R input jacks

Connect to the audio output jacks of a video

camera or VCR.

4. POWER button

Press to turn 1he power on and off.

5.VOLUME/v buttons

Press to control the volume level for the DVD and TV.

6.CHANNEL A/V buttons

Press to select memorized channel.

Press to change to TV mode when DVD mode.

7. Remote Sensor Window

8. STOP button

Stops operation of the disc.

9. REV button

Fast reverses playback to a desired point.

10. PLAY button

Starts playback of the disc contents.

Press to change to DVD mode when TV mode.

11. FWD button

Fast forwards playback to a desired point.

12. PAUSE button

Pauses the current disc nperation.

13. OPEN/CLOSE button

Press to insert discs into or remove them from the

tray:

14. HEADPHONE jack

To connect headphone (not supplied) for personal

listening.

15. MODE button

Activates program playback or random playback mode.

16. NUMBER button

TV Mode:

Press two digits to directly access the desired

channel.

Remember to press a "0" betbre a single digit

channel.

+100 button-

Press to select cable channels which are equal or

grealer than number 100.

DVD Mode:

Press to emer Ihe desired number.

+10 button-

Press to emer the desired numbers which are

equal or greater than number 10,

- 8 - EN

0C28

I [Fig. 3]

REAR VIEW

37 38 39

17. SLEEP button

Press the SLEEP button to display the sleep timer

and start the function. The shut off time can be

determined by the number of times you press the

button. (0, 10, 20, 30..90, 0 minutes)

18. SKIP buttons

Skip chaplets or tracks to a desired point.

19. ZOOM Button

Expands the picture to fill the entire screen.

20. SETUP button

Press to enter or exit the TV menu or DVD setup

mode.

21. TITLE button

Displays the title menu.

22. CLEAR button

Resets a setting.

23. DISPLAY button

TV Mode:

Press to display the channel number on the

screen. If you press it again, the channel number

will disappear.

DVD Mode:

Displays the current status on the TV screen for

checking purposes.

24. SEARCH MODE button

Press to locate a desired point.

25. AUDIO button

Press to select a desired attdio language or sound

mode.

26. SUBTITLE button

Press to select a desired subtitle language.

27. REPEAT button

P.epeats playback of the current disc, title, chapter

or track.

28. ANGLE button

Press to change Ihe camera angle to see the

sequence being played back from a different angle.

29. A-B REPEAT button

Repeats playback of a selected section.

30. RETURN button

P,etums to the previous operation.

31. ENTER button

Press to accept a setting.

32. Arrow buttons

TV Mode:

Press to select a setting mode from the menu on

the TV screen.

Press to select or adjust from a particular menu.

DVD Mode:

Use when making settings while watching the

display on a TV screen.

33. DISC MENU button

Displays the menus in the DVD.

34. SELECT button

Press to change to TV mode, external input mode

or DVD mode.

35. MUTE button

Press the MUTE button to turn off Ihe sound

portion of the TV program. (Volume level display

turns LIGHT RED from LIGHT BLUE.) Press the

MUTE button again or press the VOL(ume) • or

• button to restore sound.

36. PICTURE button

Press to enter picture adjustment mode.

37. Power cord

Connect to a standard AC outlet (120Vi60Hz).

NOTE: Remove the power cord from the hook to

avoid breaking a wire before you connect

to a standard AC outlet.

38.AUDIO L/R output jack

Connect to the analog audio input of an external

amplifier or decoder.

NOTE: The AUDIO output jacks (red/white) on

the rear panel serve to give out DVD

sound, not TV sound and ex/emal input

sound.

39. COAXIAL digital audio out jack

Connect to the digital input of an external

amplifier or decoder.

40. ANT. in jack

Connect to an antenna, cable sys/em, or salellite

system.

-9-

0C28

PREPARATION FOR USE

........ } "'?

The VHF/UHF Rod Antenna (not supplied) is detachable, Insert the slem of Ihe anlenna into the hole on the

upper-back portion of the TV/DVD. Connect the VHFiUHF Rod Anlenna or VHF/UHF Combination Antenna

to the ANT, terminal of the TV/DVD as shown in the diagram below, For the best reception, fully extend the

VHF!UHF Rod Antenna and make the necessary adjustments. (Avoid touching the top section when adjusting.)

NOTE:

Betbre plugging the Rod antenna into antenna terminal, check that the pin is not bent. If it is bent, straighten

the pin as illustrated, then plug the pin into antenna terminal,

Bent pin

Cable Plug

(Needs to be straightened) (Straight pin)

Rod Antenna

(Not supplied)

VHF/UHF Antenna

(Not supplied)

NOTE:

The connection of an indoor antenna may not always give acceptable TV reception,

[Fig. 41

in some areas it will be necessary to use an outdoor antenna.

VHF Antenna (Not supplied)

UHF Antenna

(Not supplied)

Flat twin-lead cable

- 10-

[Fig. 5]

0C28

C'IIIL,P[ WH'HO[ 7 CONWSRTFR/

Use this connection if your cable sys/em connects directly to your TViDVD wilhout a converter box,

From Cable System

I 5-ohm Coaxial

Cable (Not

supplied)

ANT

[Fig. 6]

C'II_LI;' WHW COl\' W',7I? EfU

DI:',_>CIIAMI?LI','II lIOX OF: SA2 I"LLH'I'; LtOX

If your cable service supplies you with a converter box or if you use a sa/ellite system, you can use the basic

connection shown here.

75-ohm Coaxial

Box or

Cable Box (Not supplied)

From Cable System

or Satellite Dish

ANT.

[Fig. 71

Note to CATV system installer:

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC

thai provides guidelines for proper grounding and, in particular, specifies thai the cable ground shall be

connec/ed to the grounding system of the building as close to the point of cable entry as practical.

- 11 - EN

0C28

l)Open the bat/cry compartment cover by pressing the cover on the remole unit in the direction of the arrow,

2)Insert 2 "AA" penlight batteries into the battery compartment in the direction indicated by the Ix)larity (+]-)

markings,

3)Replace the cover.

When you watch a program recorded on an another source (VCR or video camera), use the audio!video input

jacks on the front of the TV/DVD,

Connect the audio/video output jacks of another soarce to the AUDIO L]R and VIDEO jacks of this TV]DVD,

Then press the SELECT button until "VIDEO" appears on the screen.

NOTE:

• When you connect a monaural VCR (another source) to this TViDVD, connect the Audio output jack of the

monaural VCR (another soarce) to the AUDIO L jack of this TV]DVD, The audio will output in both L and

R channel equally,

To the audio

..........................................................output jacks

[Another source

Audio/Video

coaxial cable

_ (not supplied)

etc.

outputjack

[Frontof the TV/DVD]

[Fig. 8]

Antenna/Cable Connections Continued on the Next Page.

- 12- EN

0c28

[]1

i AUDIO OUT jacks

n (only DVD AUDIO OUT)

To ANALOG AUDIO INPUT jacks

[Fig. 9]

NOTES:

• Be sure to turn off Ihe power to all components in the system before connecting another component,

• Refer to the Owner's Manuals for your, stereo system and any other components to be connected to the

TV/DVD.

• The AUDIO output jacks (red!white) on the rear panel serve to give out DVD sound, not TV sound and

external input sound.

Use an audio coaxial digital cable (commercially available) for the audio connections.

Amplifier equipped with digital

_ inputjacks, MDdeck,

DATdeck, etc. I __1

I _1 To COAXIAL DIGITAL

@ll( AuD'° INpuTjack

__' °, °11 _ I

NOTES:

To DIGITAL AUDIO OUT

PCM/BITSTREAM)

COAXIAL jack

(only DVD AUDIO OUT)

[Fig. 10]

• The attdio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital

sound by an MD or DAT deck,

• Be sure to turn off the power to all comtxments in the system before connecting another component,

• Reti:r to the Owner's Manuals for the components to be connec/cd to the TViDVD.

• Set DOLBY DIGITAL and DTS to OFF fur audio output in the setup mode, Playing a TViDVD using

incorrect settings may generate noise distortion, and may also damage the speakers.

• When DOLBY DIGITAL is set to OFF and VIRTUAL 3D to ON fur audio output in the setup mode and

you select the attdio source in a 5.1 channel Dolby Digital surround format, the audio will be mulcd,

- 13- EN

0C28

If usingIbisTV/DVDtoplaybackaTV]DVDina5.1channelDolbyDigitalsurroundorDTSsurroundfor-

mat,theTV/DVDoutputsaDolbyDigitalorDTSdatastreamfromitsCOAXIALdigitalattdiooutjack,By

hookingtheplayeruptoaDolbyDigitalorDTSdecoder,youcanenjoyamoreconvincing,realisticambi-

encewithpowert_landhigh-qualitysurroundsoundofaprofessionalstandardsuchascanheheardinmovie

thea/ers,

Useaudiocoaxialdigitalcables(commerciallyavailable)fortheaudioconnections,

Center

speaker

Frontspeaker

(left)

Dolby Digital

or DTS decoder

Surround

speaker

(teft)

Front speaker

(right)

Surround

speaker

(right)

To COAXIAL DIGITAL

AUDIO INPUT jack

[]

To DIGITAL AUDIO OUT

=CM/BITSTREAM)

jack

[Fig. 11]

NOTES:

• Be sure to turn off Ihe power to all components in the system before connecting another component,

• Refer to the Owner's Manuals for Ihe components to be connected to the TV/DVD,

• If connected to a Dolby Digital decoder, set DOLBY DIGITAL to ON for attdio output in the setup mode.

• If connected to a DTS decoder, set DTS to ON for attdio output in the setup mode,

• Unless connected to a Dolby Digital decoder or a DTS decoder, set DOLBY DIGITAL and DTS to OFF for

audio output in the setup mode, Playing a TV!DVD using incorrect settings may generate noise distortion,

and may also damage the speakers.

• When DOLBY DIGITAL is set to OFF and VIRTUAL 3D to ON for audio output in the setup mode and

you select the audio source in a 5,1 channel Dolby Digital sm'round format, the audio will be muted,

Manufactured under license from Dolby

Laboratories. "Dolby" and the doub!e_D

symbol are trademarks of Do!by I

l LaboratOr es" 1

!,DTS" and "DTS Digital Out" are trademarks 1

of DigitalTheater Systems, Inc.

- 14 - EN

0c28

SET UP FOR USE

Connect the power cord to a standard AC outlet.

NOTE: If some digits appear in the comer of the

screen, press the POWER button wilhout unplugging

the power cord,

Press the POWER button to turn on the TViDVD,

Press the SELECT button on the remote control until

channel number or "TV" appears on the screen.

if you want to change the language of the on-screen

menu, follow the procedure below.

Press the SETUP button so that the _LC_ig_AE_g[_S_g_

setup display appears on the TV VCHIPSET_ANnAlS

screen. [ j

Press the Arrow • or • button to

Ixfint to "LANGUAGE".

CHANNELSET ]

_LANGUAGE[ENGLISH 1

ESPANOL

FRANCAIS

V CHIPSET UP "

CAPTION[OF_

Select "ENGLISH", "ESPAiqOL" = Spanish or

"FRAN_AtS" = French by using the Arrow _1 or

button,

Press the SETUP button to exit the setup.

NOTE: An on-screen display language must be

selected each for the TV mode and DVD mode.

To preset a channel or to change a preset channel,

follow the procedure below.

• CHANNEL SET

Press the Arrow • or • button to LANGUAGE[ENGL_H1

ESPANOL

point to "CHANNEL SET", Then, FRANCAIS

V CHIPSETUP "

press the Arrow _ button. CAPTION[OFF}

hearr°w'°r'b°n°IAOD/OELETE1

point to "AUTO MEMO", Then, • AUTOMEMO

pressthe Arrow I_ button.

The tuner scans and memorizes all

active channels in your area.

• The TV distinguishes between standard TV chan-

nels and cable channels.

• When AUTO MEMO action is completed, the low-

est memorized channel reappears on the screen.

• When you press the Arrow • or • button afler

selecting AUTO MEMO, the tuner will stop at the

memorized channels only,

• The TViVCR may memorize TV channels as

CATV channels if reception conditions are poor. If

this happens, try the AUTO MEMO action again

when reception conditions are betler.

[ADD/DELETE FUNCTION]

l)Press the SETUP button so that the setup display

appears on the TV screen.

I_ CHANNEL SET

2)Press the Arrow • or • button LANGUAGE[ENGL!SH]

ESPANOL

to point to "CHANNEL SET", FRANOAIS

V CHiP SET UP

Then, press the Arrow _ button, CAPTION[OFFI

3)Press the Arrow • or • button

to point to "ADD/DELETE", • ADD/DELETE

Then press the Arrow I_-button, AUTOMEMO

4)Use the Arrow • or • button to

select the channel you wish to

put into memory or to erase from memory.

NOTE: The display will return to the screen in

about 10 seconds, Perform "ADD/DELETE" func-

tion while this display appears on the screen.

• Press the Arrow _1 or _ button to light up the

channel number in LIGHT BLUE if you wish to

add the channel into memory,

• Press the Arrow _1 or _ button to light up the

channel number in LIGHT RED if you wish to

erase the channel from memory,

5)Press the SETUP button to exit the setup,

Press the SETUP button so that the [•LC_IguNAE_S[EETeL_.I]

setup display appears on the TV ] _SAP_AO,_]

screen. [ cVAC_,_FU_ J

-- 15--

0c28

Select the desired channel wilh the CH(annel) • or

• button,

Adjust Ihe volume to the desired listening level using

the VOL(ume) • or • button.

Adjust picture controls for a natural looking image,

(See "PICTURE ADJUSTMENT".)

Note: Suppose thai the TViDVD is shut off or in any

other mode than TV. Press the CHANNEL • or •

button on the TV]DVD, and the TV/DVD will be in

the TV mode to watch lelevision,

The sleep timer function enables you to shut off the

power wilhout pressing the POWER button alter a

desired time period,

Press the SLEEP button on the remo|e control.

You may change the sleep time /

with pressing the SLEEP button on I

the remote control repeatedly. The / SLEEP_0

timer is set up to 90 minutes, 10

minutes each time the SLEEP button is pushed. (The

timer display counts up and sleep timer will be dis-

played on the screen when you press the SLEEP but-

ton on remote control,)

To cancel the sleep timer:

Press the SLEEP button relatedly until "SLEEP 0"

is displayed,

NOTES:

• When you disconnect the unit from the AC outlet,

or if you have a power failure, the sleep time will

be lost.

• When the TV mode is changed to the DVD mode,

the sleep time will be lost,

Magnetism from nearby appliances might affect the

color of the TV picture.

If this happens, move this unit away from the appli-

ance, If the color is still not correct, disconnect power

cord from AC outlet then reconnect it af/er 30 minutes.

This TV can receive CI and C2 of Caption and Text,

L'APT [ON MODI_

l)Characters can be displayed on the TV screen when

the received broadcast signal contains the Caption

Signals.

2)Paint-on mode: Displays input characters on the

screen immediately,

Pop-on mode: Once characters are stored in mem-

ory, it is displayed all at once,

Roll-up mode: Displays the characters continuous-

ly by scrolling (max, 4 lines)

NOTE: If the CAPTION CI or C2 is selected but the

caption signal is not included, characters will not be

displayed.

TE'Xg M(_DE'

l)Displays the lext on the screen by scrolling (max, 7

lines)

2)If the received broadcast signal does not contain

the caption or text signal, no change will occur,

NOTES:

l)When your TV receives a special effects playback

signal (i.e., Search, Slow, Still) from a VCR's

video output channel (CH3 or CH4), your TV may

not display the correct caption or 1ext.

2)Captions and texts may not ma/ch the TV voice

exactly,

3)lnterti_rence may cause the closed caption system

not to function properly;

4)The caption or text characters will not be displayed

while the setup display or function's display is

shown,

- 16 - EN

0c28

5)If you see this screen!!

Select the feature you wish to adjust wilh the Arrow

• or • button and adjust it with the Arrow _ or _1

button.

If your TV displays a black box on the screen, this

means that your TV is set to TEXT mode, To clear

screen, select CAPTION CI, C2 or CAPTION

[OFF],

GAME MODE

Set to the most suitable position fur TV GAME,

[1_] : ON

[_1] : OFF

CLOSb;D ('z+P? ION SELb'CI /ION

You may view specially labeled (cc) TV programs,

movies, news, prerecorded tapes, etc. with either a

dialogue caption or text display added to the pro-

gram,

Press the SETUP button so that the setup display

appears on the TV screen,

Press the Arrow • or • button to point to "CAP-

TION".

Press the Arrow _ or _1 button to select the mode

you wish.

When done, press the SETUP button to exit the

setnp.

I _ : Press the Arrow I_ or _1 buttnn,

[++]

LANGUAGE [ENGLISH] LANGUAGE {ENGLISH]

ESPANOL ESPANOL

FRAN_AIS _ FRAN_AIS

V CHIP SET VP V CHIP SET UP

_'CAPT]ON [OFF] _'CAPT]ON [ C1]

CHANNELSET ]

LANGUAGE{ENGLISH]

ESPANOL

FRAN_AIS

V OHIP SET UP

{tin"CAPTION [ C2]

[++]

LANGUAGE{ENGLISH] LANGUAGE{ENGLISH]

ESPANOL ESPANOL

FRAN_AIS_I_ FRAN_AIS

V CHIP SET UP V OHIP SET UP

,CAPTION[ T2] II_CAPT_ON[ TI]

Press the PtCTUP.E button,

- 17-

BRIGHT

Adjust until the whitest parts of the picture are as

bright as you prefer.

[1_] : increase brightness

[_1] : decrease brightness

CONTRAST

Adjust to increase or decrease contrast,

[1_] : increase contrast

[_1] : decrease contrast

COLOR

Adjust to be brilliant or pale color,

[1_] : be brilliant color

[_1] : be pale color

TINT

Adjust to obtain natural skin tones,

[1_] : greenish tone

[_1] : reddish tone

NOTES:

• In the above steps, the picture adjustment display

will disappear from the TV screen after about 10

seconds unless you press any buttons, even though

you may not be finished. Press the SETUP and

Arrow _ button so that "PICTURE" mode is

selecmd. Then, press the Arrow • or • button

rewatedly until the display returns to the screen,

• If you adjust the other Picture control after you set

the Game mode to [ON], the Game mode is set to

[OFF] atttomatically. If you want to set the Game

mode, reset it to [ON].

["O_ Press the Arrow • • button,

_] GAME MODE _ _] BAIGHT [1_

OFF O,_ 000000010000000

CONTRAST _] l

DDDDDDDIDDIDDDD

[ ]-[1_'l] TINT _] _i] COLON _.]

0C28

V-CHIP enables parents to prevent their chiklren

from wa/ching inappropria/e malerial on TV,

V-CHIP reads Ihe rulings for programming (except

for news and sports programs, unedited movies on

premium cable channels, and Emergency Broadcast

System signals), then denies access to programming

if the program's rating meets the limitations you

select. In this case, "PROTECTED PP,OGRAM by

,,," message appears on the TV screen. You can

watch the protec/ed program by enlering access code

(default 0000),

To block ratings, follow the steps below,

• Programming may be raled by the Motion Picture

Association of America (MPAA) or according to

the Television Parental Guidelines. In order to

block any inappropriale programming, set your

limits in both places (MPAA RATING and TV

RATING),

• You cannot access the menu when the "PROTECT-

ED PROGRAM by ,.." message appears, In this

case, change to the unblocked channel, then press

the SETUP button,

[MPAA RATING SET UP]

Press the SETUP button so that the setup display

appears on the TV screen,

Press the Arrow • or • button to

point to "V-CHIP SET UP". Then,

press the Arrow I_ button,

CHANNEL SET

LANGUAGE [ENGL_H]

CAPTION [O_ PANOL

FRAN_AIS

I_V CHIP SET UP

Use the number buttons to enter 4- aCCESSCODE ]

digit access code. The dethult code

s 0000,

Press the Arrow • or • button to

point to "MPAA RATING". Then,

press the Arrow I_ button,

TV RATING

• MPAA RATING

CHANGECODE

P_ess the Arrow • or • button to apG ]VIEW]FlEW]]

PG 13 ]VIEW]

point to your desired item, ] • R ]BLOCKl

NC-17 ]BLOCK]

Then, press the Arrow I_ button to x ]BLOCK]

se ect BLOCK] or VIEW].

• G:

• PG:

• PG-13:

• R:

• NCI7:

.X:

General Audience

Parental Guidance suggested.

Unsuitable for chiklren under 13

Restricted; under 17 requires

accompanying parent or adult

guardian

No one under 17 admitted

Mature audience only

When you select Ihe rating category and turn it

[BLOCK], the higher rating will turn [BLOCK]

automatically, Also, the lower ruling will turn

[VIEW] atttoma/ically.

• When you turn "G" to [BLOCK] or [VIEW], the

all ratings will turn to [BLOCK] or [VIEW] auto-

matically.

• When you turn "X" to [VIEW], the all ratings will

turn to [VIEW[ atttomatically.

5¸

Press the SETUP button to exit the setup,

[TV RATING SET UP]

Press the SETUP button so that the setup display

appears on the TV screen,

Press the Arrow • or • button to

point to "V-CHIP SET UP". Then,

press the Arrow I_ button,

CHANNEL SET

LANGUAGE [ENGL_H 1

CAPTION [O_ PANOL

FRANCAIS

_-V CHIP SET UP "

Use the number buttons to enter 4- access CODE ]

digit access code. The dethult code

s 0000,

Press the Arrow • or • button to

point to "TV RATING". Then,

press the Arrow I_ button,

•TV RATING

MPAA RATING

CHANGECODE

[.TW'Z

Press the Arrow • or • button to TVY7{ )[VIEW]

TV G [VIEW]

point to your desired item, Then, TVPG( }[VIEW]

press the Arrow I_ button to select TV14( ) [VIEW]

TVMA{

[BLOCK] or [VIEW],

- 18 - EN

0c28

• TV-Y:

• TV-Y7:

• TV-G:

• TV-PG:

• TV-14:

• TV-MA:

the steps below. [

• When you select [TV-Y7]: [ TVY7

Press the Arrow • or • button ,Fv

to select "FV" (Fantasy

Violence). Then, press the Arrow

button to select [BLOCK] or

[VIEW].

• When you select [TV-PG],

[TV-14] or [TV-MA]:

Press the Arrow • or • button

to select "D'(Suggestive

Dialog], "L"(Coarse Language),

"S"(Sexual Situa/ion), or

"V"(Violence), Then, press the

Appropriate for all children

Appropriate for children seven and

older

General Audience

Parental Guidance sugges/ed.

Unsuitable for children under 14

Mature audience only

When you select the rating ca/egory and turn it

[BLOCK], the higher rating will turn [BLOCK]

automa/ically, Also, the lower rating will turn

[VIEW] automatically.

• When you turn "TV-Y" to [BLOCK] or [VIEW],

the all ratings will turn to [BLOCK] or [VIEW]

automa/ically,

• When you turn "TV-MA" to [VIEW], the all ra/-

ings will turn to [VIEW] automa/ically,

When you select TV-Y7, TV_PG, TV-14, or TV_MA

and you press the Arrow I_ button, the sub-ratings

will appear on the TV screen.

If you select the rating calegory (example: TV-PG)

and tuln it [BLOCK] or [VIEW], the sub-ratings

(example: V for Violence) will turn [BLOCK] or

[VIEW] automa/ically,

You can set the sub-ra/ings to [BLOCK] or [VIEW]

individually when the rating ca/egory is set to

[BLOCK]. To set the sub-ratings individually, follow

[BLOCK] l

[BLOCK]

TV PG [BLOCK]

_'D [BLOCK]

L [BLOCK]

S [BLOCK]V [BLOCK]

_*TVY [VIEWj ]

TV Y7 { ){VIEW}

TV G [BLOCK]

TV PG {DLSV)[BLOCK]

TV 14 {DLSV)[BLOCK]

TVMA{ LSV)[BLOCK]

Arrow _ button to select [BLOCK] or [VIEW].

NOTE: When you select [TV-MA], "D" does not

appear on the TV screen.

• The sub-ratings which set to [BLOCK] appears

next to the rating calegory in the TV RATING

menu,

Press the SETUP button to exit the setup.

[CHANGE ACCESS CODE]

To change access code, follow the steps.

Press the SETUP button so that the setup display

appears on the TV screen.

CHANNEL SET

LANGUAGE [ENGLISH]

Press the Arrow • or • button to CAPTION [Oc_PANOLF_

point to "V-CHIP SET UP", Then, FRANCAIS

I_V CHIP SET UP '

press the Arrow _ button.

Use the number buttons to enter 44 ACCESSCODE ]

digit access code, The default code

s 0000.

Press the Arrow • or • button to TVARAAqI_IANT_NG I

point to "CHANGE CODE", Then, I1_CHANGECODE

press the Arrow I_ button.

Use the number buttons to enter f NEWCODE 7

your desired access code in the /

NEW CODE space. Then enter the / co_,o_oooE

same code in the CONFIRM /

CODE space. V-CHIP SET UP

[

screen appear °n the screen' [ NEWCODE ]

• if you enter wrong code, repeat

step 5, making sure you enter CONF_RMCOOE

the same new code exactly in

the confirm code space,

Press the SETUP button to exit the setup,

Note:

• If you unplug the power code or lx_wer failure

occures, the changed access code will _ lost and

will retuln to default (0000), Change your access

code again as necessary,

- 19- EN

0C28

ThefollowingdiscscanbeplayedbackonthisDVD

player.

Maxilllll in

Disc Type Logo Contents Disc Size Playback Time

Approx. 4 h

12 cm (single sided)

Approx. S h

(double sided)

Approx. S0 rain

(single sided)

Approx. lbX) rain

(double sided)

Somld

DVD and

Video w n D E o Picmres

S cm

12 cm

rim

Audio

_J_l_[_ Somld S ....

CD Eanr_

(singles)

74 rain

20min

This player conforms to the NTSC color system. You can-

not play discs recorded in other color systems such as

PAL or SECAM.

• Some discs include region codes as shown below

@ %

• The number inside the symbol refers to a region of the

world, and a disc encoded in a specific region format

can only be played back on DVD players with the stone

region code.

The f_llowing discs cannot be played back on this

DVD player.

• DVD with region codes other than 1 or ALL.

• DVD-ROM

oDVD-RAM (Never play back, otherwise mal-

function may result.)

• CD-ROM

• VSD

• CDV (Only plays back the audio part.)

• CD-G (Only plays back the sound.)

oCD-R

(Never play back, otherwise malfunction may

result.)

oCD-I

(Never play back, otherwise malfunction may

result.)

• Photo CD

(Never play back, otherwise malfunction may

result.)

• Video CD

(Never play back, otherwise malfunction may

result.)

Any other disc_swithout compatibility indications

[DVD]

Data on a DVD is divided into sections called "titles", and

then into subsections called "chapters", each of which is

given a title or chapter number. Playback conditions are

preset on some DVD video discs, and these playback con-

ditions take priority over user operations on this player If

a function you selected do not run as desired, refer to the

manual accompanying the disc.

Example

Title 1 _l_ Title 2

[AUDIO CD]

Data on an audio CD is divided into sections called

"tracks", each of which is given a track number.

Example

Track 1 LTrack 2 I "r,._k3d T,ack4d T,'ack5 LT,'ack6

- 20 - EN

0C28

Page is loading ...

Sylvania SRTD219 Owner's manual

Brand: Sylvania

Model: SRTD219

Category: DVD players

Type: Owner's manual

Download PDF

report

in other languages

español: Sylvania SRTD219 El manual del propietario

Sylvania SRTD219 Owner's manual

Sylvania SRTD219 Owner's manual

in other languages

Related papers

Other documents