Groupe Brandt DFS1010W Owner's manual
- Category
- Dishwashers
- Type
- Owner's manual
This manual is also suitable for
Reviewing the section on troubleshooting Tips
will help you to solve some common problems
by yourself .
Dear Customer,
Please carefully read this manual bef ore using the
dish washer, it w ill help you use and maintain the
dishwasher properly.
Pass it on to any subsequent owner of the applianc e.
This ma nual con tains sections on safety Instru ctions,
Operating Instru ction s, Installation Ins tructions and
Trou bleshoo ting Tips, etc.
The manufacture r, following a policy of con stant
dev elopment and updating of the product, may
make modifications without giving prior notice.
This user ma nual shall also be got from the
manufacturer or responsible vendor.
Keep this manual for future reference.
If you can not solve the problem s by yourself ,
please ask for the help of professional technicians.
1) Safety Instructions....................................1-4
2) Quick user guide..........................................5
3) Operating Instructions.................................6
4) Prior to first time use....................................7
5) Preparing and loading dishes.....................12
6) Starting a washing program.......................14
7) Maintenance and cleaning..........................16
8) Installation Instruction...............................18
9) Troubleshooting Tips.................................21
Loading the baskets according t o En50242
Control Panel....................................................6
Dishwasher Features.........................................6
A.Water Softener...............................................7
B.Loading the Salt into the Softener....................8
C.Filling the Rinse Aid Dispenser........................8
D.Function of Detergent.....................................9
Recommendations for loading and unloading
the dishwasher................................................12
Standard loading pattern..................................13
Wash Cycle Table............................................14
Turning on the Appliance..................................14
Changing the Program mi d-cycle.. ....................15
At the end of the Wash Cycle.............................15
Filter System...................................................16
Caring for the Dishwasher.................................17
Positioning the Appliance.................................18
About Power Connection..................................18
Water connection.............................................19
Start of dishwasher..........................................20
Before calling for service..................................21
Error codes ....................................................22
Technical information.......................................23
This appliance is intended to be used in household
and similar applications such as:
-staff kitchen areas in shops, offices and other
working environments;
-farm houses;
-by clients in hotels, motels and other residential type
environments;
-bed and breakfast type environments.
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision
or instruction concerning use of the appliance in a
safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning
and user maintenance shall not be done by children
without supervision.(For EN60335-1)
Packaging material could be dangerous for children!
This appliance is for indoor household use only.
To protect against the risk of electrical shock,
do not immerse the unit, cord or plug in water or
other liquid.
Please unplug before cleaning and performing
maintenance on the appliance.
Use a soft cloth moistened with mild soap, and then
use a dry cloth to wipe it again.
When using your dishwasher,
follow the precautions listed below:
This appliance must be earthed. In the event of a
malfunction or breakdown, earthing will reduce the
risk of an electric shock by providing a path of least
resistance of electric current. This appliance is
equipped with an earthing conductor plug.
The plug must be plugged into an appropriate outlet
that is installed and earthed in accordance with all
local codes and ordinances.
Improper connection of the equipment-earthing
conductor can result in the risk of an electric shock.
Check with a qualified electrician or service
representative if you are in doubt whether the
appliance is properly grounded.
Do not modify the plug provided with the appliance;
If it does not fit the outlet.
Have a proper outlet installed by a qualified electrician.
Do not abuse, sit on, or stand on the door or dish
rack of the dishwasher.
Do not operate your dishwasher unless all enclosure
panels are properly in place.
Open the door very carefully if the dishwasher is
operating, there is a risk of water squirting out.
Do not place any heavy objects on or stand on the door
when it is open. The appliance could tip forward.
When loading items to be washed:
1) Locate sharp items so that they are not likely to
damage the door seal;
2)Warning: Knives and other utensils with sharp points
must be loaded in the basket with their points
down or placed in a horizontal position.
Check that the detergent powder is empty after
completion of the wash cycle.
Do not wash plastic items unless they are marked
dishwasher safe or the equivalent.
For check the
manufacturer's recommendations.
Use only detergent and rinse agents recommended for
use in an automatic dishwasher.
The door should not be left open, since this could increase
the risk of tripping.
If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified
person in order to avoid a hazard.
During installation, the power supply must not be
excessively or dangerously bent or flattened.
Do not tamper with controls.
The maximum number of place settings to be washed
is 10.
The maximum permissible inlet water pressure is 1MPa.
The minimum permissible inlet water pressure is 0.04MPa.
facing
“ ”
unmarked plastic items not so marked,
Never use soap, laundry detergent, or hand washing
detergent in your dishwasher.
The appliance needs to be connected to the main water
valve using new hose sets. Old sets should not be reused.
3
4
This appliance's packaging materials are recyclable.
Dispose of the packaging into a suitable waste
collection container to recycle it.
It is prohibited to dispose of this appliance as
household waste.
Correct Disposal of this product: this symbol on the
product or in its packing indicates that this product
may not be treated as household waste. Instead,
it should be taken to the appropriate waste collection
point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative
consequences for the environment and human health,
which could otherwise be caused by the inappropriate
waste handling of this product.
For more detailed information about the recycling of
this product, please contact your local council your
household waste disposal service, or the shop where
you purchased the product.
For disposing of package and the appliance please
go to a recycling centre. Therefore cut off the power
supply cable and make the door closing device
unusable.
Cardboard packaging is manufactured from recycled
paper and should be disposed in the waste paper
collection for recycling.
By ensuring this product is disposed of correctly, you
will help prevent potential negative consequences
for the environment and human health, which could
otherwise be caused by inappropriate waste handling
of this product.
For more detailed information about recycling of this
product, please contact your local city office and your
household waste disposal service.
DISPOSAL: Do not dispose this product as unsorted
municipal waste. Collection of such waste separately
for special treatment is necessary.
For detailed operating method read the corresponding conte nt on the instruction manual.
(On models with water softener system only.)
Electric indicator on control panel (if provided).
If there is no salt warning light in the control panel
(for some models), you can estimate when to fill the salt into
the softener by the number of cycles the dishwasher has run.
Check the regeneration
salt level
Load the baskets
Select a program
Running the dishwasher
To lo ad the baskets, ref er to the section entitled Loa ding th e Dishwasher Baskets .“ ”
Switch on the appliance
Switch off the appliance
Turn off the water tap,
unload the baskets
Warning: wait a few mi nutes (about 15 m inutes ) before unlo ading the di shwasher to avoid
hand ling th e dish es and utensils wh ile the y are s till hot and m ore susceptible to break .
The dishes will al so dry better. First start unload ing th e lowe r basked.
Changing the program
Add forgotten dishes in the
dishwasher.
If the appliance is switched
off during a wash cycle.
Open the do or carefully.
Hot st eam may esc ape
when the do or is opened!
If the appliance is switched off during a wash cycle, when switched
on again, please re-select the washing cycle and operate the dishwasher
according to the original Power-on state ).
1. A running cycle can only be modified if it has been running for a short time. Otherwise the detergent
may have already been released and the water already drained. If this is the case, the detergent
dispenser must be refilled.
2. Press the Start/Pause Button to stop washing , Then press programme button after 3 seconds,
the program will cancel.
3. Turn the selector to select a new program.
4. .Press the Start/Pause Button, the dishwasher will run after 10 seconds.
1.Press the Start/Pause Button to stop the washing.
2.Open the door a little .
3.After the spray arms stop working, you can open the door completely.
4.Add forgotten dishes.
5.Close the door
6.Press the Start/Pause Button, the dishwasher will run after 10 seconds.
Turn on the water tap and press the Start/Pause Button. The machine will start working
after about 10 seconds.
Close the door, press the program button until the selected program indicator lights up.
( See the section entitled Operation instruction )“ ”
Press the On/Off button to switch on the appliance, Open the door.
When the working cycle has finished, the buzzer of the dishwasher will sound 8 times, then stop.
Turn off the appliance using the On/Off Button.
Since the appliance is standing by, it will power off automaticly after 30 minutes without any operation.
With each wash cycle.
Compartment
For programmes with pre-wash only.
(Follow the user instructions!)
Electric indicator on control panel (if provided).
Check the rinse aid level
Fill the detergent dispenser
before using it for the first time.
To get the best performance from your dishwasher, read all operating instructions
Back ViewFron t view
1
2
3
4
5
7
6
11
8
Lower basket
Salt co ntainer
Dispenser
Cup shelf
Spray a rms
Filter assembly
Inlet pipe connector
Drain pipeUpper basket
Cutlery rack
1
Inner pipe
5
6
7
8
9
10
11
3
2
4
9
10
1.On/Off Button: Turn on/off the power supply.
3.Delay Button :Press the button to add delay time.
2.Program Button : Press the button to select a
wash Program.
8.Display screen: Show the time
and the state(running state, delay time etc )
remaining
Rinse A id indica tor:
Indicates when t he dispenser needs to be refilled.
Add salt indi cator:
Indi cates when t he dispenser needs to be refilled.
Faucet indicator:
Shows that t he faucet has not been opened.
Delay time ,Remain time ,or e rror codes indicator:
4.Halflo adB utto n:Press the button to select half load
function,after having selected the wash program.
6.Start /Pause butto n: To start the selected
washing p rogram or to pause the washing progr am
when the machine is working.
5. Extra Drying : Press the button to select Extra D rying
function,The resp onse indicator will blink.
7.Child lock button: Press 3 and 4 buttons simultaneo
usly to lock the appliance and to prevent
children from accidentally changing the
dishwasher cycle or starting the dishwasher.
The water softener must be set manually, using the water hardness dial.
The water softener is des igned to remove minerals and salts from t he water, which would have
a detrimental or adverse effect on the operation of the appliance.
The more minerals there are, the harder your water is
The softener sho uld be adjusted according to the hardness of the water in your area. Your local Water Authority
can advise you on the hardness of the water in your area.
Adjusting Salt Consumption
The dishwasher is designed to allow for adjustment in the amount of salt co nsumed based on the hardness of
the water used. This is intended to optimise and customise the level o f salt consumption.
WATER SOFTENER
The hardness of the water varies from place to place. If hard water is used in the dishwasher, de posits will
form on the dishes and utensils.
The appliance is equipped with a special softener that uses a salt container specifically designed to eliminate
lime and minerals from the water.
Contact your local water board for information on the hardness of your water supply.
If your model does not have any water softener, you may skip this section.
Clark: British degree
fH: French degree
dH: German degree
dH=1.25 Clarke=1.78 fH=0.178mmol/l
1
The manufactory setting: H3 (EN 50242)
Before using your dishwasher for the first time :
A. Set the water sof tener
B. Add 1.5Kg dishw asher salt an d then full fill the salt con tainer with water
C. Fill the rinse aid dispenser
D. Fill in detergent
Please follow the steps below for adjustment in salt consumption.
1. Switch on the appliance;
2. Pre ss the Start/ Pause butto n for mo re than 5 seconds to start the water
softener s ettin g mode (to be done within 60 se conds after the a ppliance is switched on;
3. Press the Start/ Pause button to sele ct the proper setting dep ending on the ha rdne ss
of you r local water, the setting s will change in the following
se que nce : H1 ->H2->H3->H4- >H5->H6;
4. To end the setti ng mode, eit her press the On/Off button o r wa it 5 seconds .
dH
mmol/l
0~90~5 0~0.94
H1
0
10-20
6-11
1.0-2.0
H2
9
21- 3012-17 2.1-3.0
H3
12
H4
20
fH
0~6
7-14
15-21
Clarke
WATER HARDNE SS
Selector Po si ti on
Salt consumption
(gram/cycl e)
18-22 31-40 22-28 3.1-4.0
41- 6023-34 4.1-6.0
H5
30
H6
60
29-42
35-55 61-98 43-69 6.1-9.8
1. The salt contai ner must only be refilled when the salt warning light in the control panel comes on.
Depending on how well the salt dissolves, the salt warning light may still be on even though the
salt container is filled.
If there is no salt warning light in the con trol panel (for some Models),you can estim ate when to fill
the salt into the softener by the cycles that the dishwasher has run.
2.
I f sal t has spilled, run a soak or quick program to remove it.
Always use salt intended for dishwasher use.
The salt container is located beneath the lower basket and should be filled as explained
in the following:
Warning!
Only use salt spe cifically designed for ! Every other type o fdishwashers use
salt not specifically desig ned fo r , e specially table salt, willdishwasher use
damage the water softener. In case of damages caused by the use of unsuitable
salt the ma nufacturer does not give any warranty nor is liable for any damages caused.
Only fil l with salt just before starting one of the co mp lete washing p rograms.
This will prevent any grains of salt or salty wate r, which ma y have been spilled,
remaining on the bottom of the machine for any period of time, which may cause
corrosion.
with water, It is normal for a small amount of wa te r to
come out of the salt container.
Fill the salt container to it s maximum limit
A After the low er basket has been removed, unscrew and remove the cap from the salt container.
B Pl ace the end of the funnel (supplied) into the hole and about 1.5kg of dishwasher salt.
poo r in
C
D Af ter fil ling the container ,
screw back the cap tightly.
E The sal t warning light will stop being after th e salt contain er has be en filled with salt.
F Imm ediately after filling the salt into the salt container, a washing program should be started
program Other wise the filter system, pump or ot her important parts of the machine may be damaged
by salty water. This is out of warranty.
(We su ggest to use a short
).
The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes, which can
leave spots and streaks. It also improves drying by allowing w ater to roll off the dishes. Your dishwasher is
designed to use liquid rinse aids. The rinse aid dispenser is located inside,on the door an d next to the detergent dispens er.
To fill the dispenser, open the cap and po ur the rinse aid into the dispenser u ntil the level indicator turns completely
black. The volume of the rinse aid container is about 110ml.
Rinse Aid Dispenser
Function of Rinse Aid
Warning!
Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with any other substances
(e.g. Dishwasher cleani ng agent, liquid dete rgent). This would damage the appliance .
Rinse aid is automatically added d uring the last rinse, ensuring thorough rinsing, a
spot and streak free drying.
To open the dispenser, turn the cap to the "open" (left) arrow and lift it out.
Carefully pour in the ri nse-aid into it s dispenser, wh ilst avoiding it to overfl ow.
Replace the cap by inserting it aligned with "open" arrow and turning it to the closed (right) arrow.
Adjusting Rinse Aid Dispenser
The rinse aid dispenser has six or four set tings. Always st art with the dispe nser
set on "4". If spot s and poor drying are a problem, increase the amount of rinse
aid dispensed by removing the dispenser lid and rotating the dial to "5". If the
dishes still are not drying properly o r show spots, adjust the dial t o the next
high er lever until your dishes are spot-free. The recommen ded setting is "4".
(Factory value is "4".)
Increase the dose if there are drop s of water o r lime spots on the dishes after washing.
Reduce it if there are sticky whitis h stains on your dish es o r a bluish fil m on glassware or
knife blad es.
1
2
3
As the rinse aid diminishes, the size o f the black dot
on the rinse aid level indicator changes, as illustrated b elow.
Full
3 / 4 full
1 / 2 full
1 / 4 full - Should refill to eliminate spotting
Empty
When to Refill the Rinse Aid Dispenser
Un less the rins e-ai d warning light o n th e control panel is on , you ca n always estimate the amount from the color
of the optical level indicator "C "loc ated next to the cap. When the rinse-aid container is full , the indicator
wi ll be fully dark. The size of the dark d ot decreases as the rinse-aid diminishes . You should never let
the rinse aid level be le ss than 1/4 full.
during the next wash. Don't forget to replace the cap before you close the dishwasher door.
Clean up any spilled rinse a id
with an absorbent cloth to avoid excessive foaming
The chemical ingredients that c ompose the detergent are necessary to remove, crush and dispense all dirt out of
the dishwasher. Most of the commercial qua lity detergents are suitabl e for this purpose.
" "
Proper Use of Detergent
Use only det ergent specifically made for . Keep your detergent fresh and dry.dishwasher use
Don't put powdered detergent into the dispenser until you are ready to wash dishes.
Warning!
Amount of Detergent to Use
Based on their chem ical composition, deterge nts can be split in two basic types:
Detergent tablet s of different brands disso lve at different speeds. For this reason some
detergent tablets cannot dissolve and develop their full cleaning power during short
programs. Therefore please use long programs wh en usin g detergent tablets, to
ensure the complete rem oval of detergent residuals.
The dispenser must be refilled before the start of each wash cycle following the inst ructions
provided in t he wash cycle table . Your dis hwa sher uses less de tergent and rinse aid than
Conventiona l dishwasher. Generally, only one tablespoon of detergent is needed for
a normal wash load. More heavily soiled items need more detergent. Always ad d the
detergent just before starting the dishwas her, otherwise it could get damp and w ill not
dissolve properly.
Concentrated Detergent
Detergent Tablets
Detergent Dispenser
co nventional, alkaline detergents with caus tic components
low al kalin e co ncentrated detergents with natural enzym es
Normally new pulverised detergent is without phosphate. T hus the water softener function of
phosphate is not given. In this case we recommend to fill salt in the salt containe r even w hen
the hardness of water is only 6 dH. If detergents without phosphate are used in the case of hard water
often white spots appear on dishes and glasses. In this case please add more detergent to reach
better results. Detergent s without chlorine do only bleach a little. Strong and coloured spots will not
be removed completely. I n this case please choose a program with a higher temperature.
°
Detergents
There are 3 sorts of d etergents
1.With phosphate and with ch lorine
2.With phosphate and without chlorine
3.Withou t phosphate and without chlorine
Always add the detergent just before starting each wash cycle.
Only use branded detergent aid for dishwasher.
If the lid is closed: press release button. The lid will spring open.
De tergent tabl et
De tergent pow der
Push latch to open
Dishwasher detergent is corrosive!
Take care to keep it out of reach of children.
Fill the detergent dispenser with detergen t.
The marking indicates the dosing levels , as
illustrate d on the right:
Place the main wash cycle detergent h ere.
Place the pre-was h cycle d etergent here.
Plea se observe the manufacturer s dosing and storage
Recommendations as stated on the detergent packagi ng.
Close the lid and press on i t until it locks into pl ace.
If the dishes are heavily soiled, place an a dditiona l
detergent do se in the pre-wash detergent chamber. This detergent will take effect during the pre-wash phas e.
A
B
Filling the detergent dispenser
A B
You information about the amount of detergent for th e single programme on p age 14.
will find
Be aware that depending on the so iling of wate r, se tting may be different.
Please observe the manufacturer's recommendations on the detergent packaging.
Cutlery with wooden, horn china or
mother-of-pearl handles
Plast ic items that are not heat resistant
Older cutlery with glued parts t hat are not
temperature resistant
Bonded cutlery items or dishes
Pewter or copper items
Crystal glass
Steel items subject to rusting
Wooden platters
Items made from synthetic fibres
Some types of glasses can become
dull after a large number of washes
Silver and aluminum parts have a
tendency to discolour during washing
Glazed patterns may fade if machine
washed frequently
Are not suitable
Are of limited suitability
Dishes and items of cutlery must not lie inside one anot her, or cover each other.
The upper basket is designed to ho ld more delicate and lighter dishware suc h as glasses , coffee
and tea cups
Long bladed knives stored in an upright position are a potential hazard!
Long and/or sharp items of cutlery such as carving knives must be positi oned
horizontally in the upper basket.
Please do not ove rload your dishwasher. This is important for good results and for
reasonab le consumption of energy.
To avoid damage, glasse s should not touch one another.
Load large a nd difficult t o clean items in t he lower basket.
Load hollow items such as cups, glasses, pans etc. With the opening facing downwards so that
water cannot collect in the container or a deep b ase.
Consider buying utensils which are identified as dishwasher-proof.
Use a mild detergent that is described as 'kind to dishes'. If necessary, seek further
information from the detergent manufacturers.
For particular items, select a program w ith
To prevent damage, do not take glass a nd c utlery out of the dishwasher immediately
after the programme has ended.
the lowes t po ssible te mpe rature.
(For best performance of the dishwasher, follow the se loading guidelines.
Features and appearance of baskets and cutlery ba skets may vary from your model.)
Scrape off any larg e amounts o f leftover food. Soften remnants of burnt food in pans.
It is not necess ary to rinse the dishes under running water.
Place objects in the dishwasher in following way:
1.Items such as cups, glasses, pots /pans, etc. are faced dow nwards.
2.Curved items, or ones with recesses, should be loaded aslant so th at water can run off.
3.All utensils are stacked securely and can not tip over.
4.All utensils are placed in the way that the spray arms can rotate freely during washing.
Very small items should not be washed in the dishwasher as they could easily fall out of the basket.
To prevent water dripping from the uppe r basket into the lower basket, we recommend that you
empty the lower basket first
, followed by the
upper basket.
The upper basket is designed to hold m ore delicate
and lighter dishware such as glasses, coffee and
tea cups and saucers, as well as pl ates, small bowls
and shallow pans (as l ong as they are not too dirty).
Positi on the dishe s and cookware so that they w ill
not get moved by the spray of wate r.
Pots, serving bowls, etc, must always be placed top down.
Deep pots should be slanted to allow water to flow out.
Please be reminded that:
The Botto m Basket features folding spikes so that larger or more pots and pans can be loaded.
The height of the u pper rac k ca n be eas ily adjusted to
accommodate talle r dis hes in e ithe r the upp er and lowe r
ra ck.
The hei ght of the upper basket can be adjusted
by placing the wheels on different height of the rails.
They do not nest together.
Silverware is placed with the male face up.
Long utensils in the middle.
For bett er s tacking o f cups, the shelves c an be
folded d own as s how in the picture b elow.
WARNING!
Do not let any item extend through bottom.
Always load sharp utensils with the sharp
pointing down!
We suggest that you place large items and the most
difficult to clean items
pans, lids, servi ng dishe s an d b owls, as shown
in the figure below. It is preferable to place serving
dishes and lids on the side of the racks in order to
avoid blocking th e rotation of the top s pray arm.
in to t he lower bas ket:
such as
pots,
The maximum diameter advised for plates in front of
the detergen t dispenser is of 1 9 cm, this not to
hamper the open ing of it
For a top quality cleaning, place the silverware in the basket making sure th at:
Cutlery should be placed in the cutlery rack separatelyfrom each other in the appropriate positions, and do
make sure the utensils do not nest together, this maycause bad performance.
For better stacking of pots and pans, the spikes can be
folded do wn as show in the picture .
below
*EN 50242 : This program is the test cycle. The information for comparability test
in accordance with EN 50242, as follows:
Capacity: 10 setting
Position Upper baske t: lowest position
Rinse aid setting: 6
PI:0.49W; P :0.45W.
o
Left-on mode duration: Power will be cut off automatically after program finished for 30 minutes.
Means : Rinse-aid dispenser needs to be filled.
( )
Intensive
Normal
(* E N 50242)
Rapid
Glass
3/22g
3/22g
3/22g
20g
3/22g
25g
90 Min
Soa k
For normally soiled loads,
such as , plates,glasses
and lightly soiled pans.
pots
For heaviest soiled crockery,
and normall y soiled pots
pans dishes etc with dried
on soiling.
、
、
For lightly soiled loads that
do not need excellent drying
efficiency.
A shorter wash for lightly
soiled loads and quick wash.
For lightly soiled crockery
and glass
Wash (45 )
Rinse
Rinse (55 )
℃
℃
(50 )℃
175
192
165
30
1.1
0.75
1.4
0.7
16.5
13
9
10
Wash(65 )
Rinse
Rinse (65 )
Drying
℃
℃
90 11.5
1.15
Pre-w ash
wash( 40 )
Rinse
Rinse(60 )
Drying
℃
℃
125
0.75 13.5
Prewash 50
Wash 65
Rinse
Rinse
Rinse 70
Drying
（
℃ ）
（
℃）
（
℃）
Prewash(45 )
Wash (55 )
Rinse
Rinse (65 )
Drying
℃
℃
℃
Prewash
Wash (45 )
Rinse(65 )
Drying
℃
℃
This is standard programme, it is
suitable to clean norm ally soiled
tableware and it i s the most efficient
programme in terms of its c ombi ned
energy and w ater consum ption for
that type of tableware.
A shorter wash for lightly
soiled loads t hat do not
need dryi ng.
Prewash
15
0.02
3.5
Starting a cycle wash
Draw out the lower and upper basket, load the dishes and push them back.
It is load the lower basket first , then the upper one (see the section entitled
Loading the Dishwasher ).
Pour in the detergent (see the section entitled Salt, Detergent and Rinse Ai d ).
Insert the plug into the socket. The power supply is 220-240 VAC /50 HZ, the specification
of the socket is 10A 250VAC. Make sure that the water supply is turned on to full pressure.
Close the door, press the On/Off button to switch on the machine.
Press the program button , the wash program will be changed as follows direction:
. Then press the Start/Pause button
recommended to
turn on t he
dishwasher will start its cycle.
“ ”
“ ”
Intensive->Normal->ECO->Glass ->Rapid ;->90 Min ->Soak
If a program is selected, the response light will
1
2
3
4
5
If your model has broken remember function, the machine will go on to finish the selected
program .after the power cut
When the working cycle has finished, the buzzer of the dishwasher will soun d for 8 seconds, then stop. Turn off
the appliance using the ON/OFF button, shut off the water supp ly and open the door of the dishwashe r.
Wait for a few minutes before unloading th e dishwasher to avoid ha ndling the dishes and utensils while they
are still hot and more susceptible to break . They will also dry better.
Switching Off the Dishwasher
The program light is on but is not blinking,
1.Switch off the dishwasher by pressing the On/Off Button.
2.Turn off the water tap!
only in this case has the program en ded.
Open the door carefully.
Hot dishes are sensitive minutes before removing from
the appliance.
Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In this way they
will be cooler and the drying will be improved.
shocks. The dishes should cool down for around 15
Unloading the dishwasher
Empty the lower basket first and then the upper one. This will avoid water dripping from the upper Basket onto
the dishes in the lower one.
It is normal for the dishwasher to be wet inside.
If you open the door , the machine will pause. The program light will
stop blinking and the buzzer will mooing every minute unless you close the door . After
you close the door ,the machine will keep on working after 10 seconds.
dur ing a wash cycle
A forgotten dish can be added any time before the detergent cup opens.
Add forgotten dishes.
Close the door
After the spray arms stop working, you can open the door
completely.
2
3
Open the door a little .
1
4
5
6
Press the Start/Pause Button to stop the washing.
Press the Start/Pause Button. The d ishwasher will run
after 1 0 seconds.
It is dangerous to open the door mid-cycle,
as hot steam may scald you.
Changing the Program Mid-Cycle
Premise:
A running for a short time. Otherwise, the
detergent may have already been released, and the appliance may have already drained the wash water.
If this is the case , the detergent dispenser must be refilled (see the section entitled " Loading the
Detergent " ).
running cycle can only be changed if it has only been
Press the Start/Pause button , the machine will pause, press the pro gram button more than 3s then you
can change the program to the desired cycle setting (s ee the section entitled " Starting a wash cycle. . ." ).
1
2
When you press the Start/Pause button to pause during washing, the will
stop blinking and the dishwasher will mooing every minute unless you press the
Start/Paus e button to start.
running indicator
The filter prevents larger remnants of food or other objects from getting insi de the pump.
The residues may block the filter, in this case they must be rem oved .
The filter system consists of a coarse filter,a flat (Main filter)
And a microfilter(Fine filter).
Food and soil particles trap ped in this filter are pulverize d by a
special jet on t he lower spray arm and w ashed down to drain.
La rger items, such as p ieces of bones or glass, that could block
the drain are trapped in the coarse filter. To remove the items
caught by the filter, gently sque eze the tap on th e top of this
filter and lift out.
This filter holds soil and food residues in the sump a rea a nd
Prevents
them from being redeposited on the dishes during wash cycle.
Main filter
1
Coarse filter
2
Fine filter
3
2
3
1
Filter assembly
The filter efficiently
For best performance and results, the filter must be cleaned regularly. this reason, it is a good idea to
remove the larger food particles trapped in the filter after each wash cy cle by rinsing the sem icircular filter and
cup under running water. To remove the filter device, pull the cup handle in the upward direction.
remo ves food particles from the wa sh w ater, allowing it to be rec ycle d during the cycle.
For
The dishw ash er must never be used without the filters.
Impro per replacement of the filter may reduce the performance level of the appliance
and damage dishes and utensils.
1
2
Step 1 Turn the：
filter counterclockwise,
Step 2 lift the filter assy up：
When following this procedure from step1 to step 2, the filter system will be removed;
when following it from Step 2 to Step 1, the filter system will be installed.
The control pane l can be cleaned by using a lightly dampened cloth.
After cleaning, make sure to dry it thoroughly.
For the exterior, use a good appliance polish w ax.
Never use sharp objects, scouring pads or har sh cleaners on a ny part of the dishwasher.
Warning
1 .Cut off the electrical power to the dishwasher at the supply source.
2. Turn off the water supply and disconnect the water inlet pipe from the water valve.
3. Drain t he water from the inlet pipe and water valve. (Use a pan to gather the water)
4. Reconnect the water inlet pipe to the water valve.
5. Remove the filter at the bottom of the tub and use a sponge to soak up water in the sump.
please take frost protection measures on the dishwasher in winter. Every fter washing cycles,
please operate as follows
time a
：
Cleaning the Filter
Cleaning the Door
To clean the coarse fi lter and the fine filter, use a cleaning brush. R eassemble the filter parts as shown in the figures
on the last page and reinsert the entire assembly in the dishwa sher, positioning it in its seat and pressing downwards.
When cleaning the filters, Otherwise, the filters could be
contorted and the performance of the dishwasher could be decreased.
do not knock them.
To cle an the edge around the door, you
To avoid penetration of water into the door lock and electrical components, do not
use a spray cleaner of any kind.
should only use a soft, ward and damp
cloth.
Never use a spray cleaner to clean the door panel as it may dam age the door lock
and electrical components.
Abrasive ag ents or some paper towels shou ld not be used because of the risk of
scratching or leaving spots on the stainl ess steel surface.
Cleaning the Spray Arms
If your dishwasher cannot work because of the ice,
please contact professional service persons.
It is necessary to clean the spray arms re gularly fo r hard
wate r che micals will clog the sp ray arm jets a nd bearings.
- After each cycle, check for any debris in the filter to avoid future blockag e.
- By unscrewing the coarse filter, you can remove the filter system . Remove any foo d remna nts and
clean the filters under running water.
Remarks:
The entire filter assembly should be cleaned once a week.
To remove the lower spray arm, pull out the spray arm u pward.
To remove the upper spray arm, hold the nut, rotate the arm
clockwise to r emove it.
Wash the arms in soapy and warm water and use a soft brush to
clean the jets. Replace them after rinsing them thoroughly.
It is recommend that you run a wash cy cle with the
dishwasher empt y an d the n remove the plug from the
sock et, turn off the wa ter supply and leave the door of
the appliance slightly open. This w ill help the d oor
seals to last longer and prevent odours from forming
within the appliance.
If the appliance must be moved, try to keep it in the
vertical position. If absolutely necessary, it can be
positioned on its back.
One of the factors that cau se odours to form in the
dishwasher the seals.
Periodic cleaning with a damp sponge will prevent this
from occurring.
is rema ining food strapped i
n
Before cleaning or performing maintenance, always
remove the plug from the socket.
To clean the exterior and rubber p arts of the di shw asher,
do not use solvents or abrasive cleaning products.
Only use a clo th with warm so apy water.
To rem ove spots o r stains from the surface of the
interior, use a cloth da mpened with water an a little
vinegar, or a cleaning pro duct made specifical ly for
dishwashers.
Remove the Plug
No Solvents or Abrasive Cleaning
Moving the Appliance
Seals
After every wash, turn off the water supply to the
appliance and leave the door slightly op en so that
moisture and odours are not tra pped inside.
After Every Wash
When not in Use for a lo ngTime
Ensure the voltage and frequency of the p ower being correspond s to
those on the rating plate.Only insert the plug into an electrical socket which is earthed
prop erly. If the el ectrical socket to which the appliance must be connected is not
appropriate for the plug , replace the socket, rather than using a adaptors or the like as
they could cause overheating an d burns.
Plea se look at th e rating label to know the rating voltage and connect the dishwasher to the appropriate power suppl y.
Use the required fuse 10 amp, tim e delay fuse or c ircui t breaker recommended and provide separate circuit serving
only this appliance.
Position the appliance in the desired location. The back should rest against the w all behind it, and the sides,
along the adjacent cabinets or walls. The dishwasher is equipped with water supply and drain hoses th at can
be positioned either to the righ t or the left s ides to facilitate proper installation.
Once the appliance is positioned for levelling, the height of the dishwasher
level of the feet .
ma y be altered by adjusting the screwing
For personal safety:
Do not use an extension cord or an adapter plug
with this appliance.
Do not, under any circumstances, cut or remove
the earthing connection from the power cord.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
Groupe Brandt DFS1010W Owner's manual
- Category
- Dishwashers
- Type
- Owner's manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Groupe Brandt DFH1210S Owner's manual
-
-
-
-
-
Groupe Brandt DFH14617W Owner's manual
-
Groupe Brandt DVH15423J Owner's manual
-
De Dietrich DVH1342J Owner's manual
-
-
Other documents
-
De Dietrich DVH1044X User manual
-
Bellini BDW86S-F User guide
-
Danby DDW1805W User manual
-
Glen DW 7618 K User manual
-
De Dietrich DVH1342J Operating instructions
-
De Dietrich DVH1342J Owner's manual
-
De Dietrich DVH15423X Operating instructions
-
Seiki SC-1000AU7DW User manual
-
De Dietrich DVH15423J Owner's manual
-
