Brandt DFS1010W Owner's manual

Reviewing the section on troubleshooting Tips

will help you to solve some common problems

by yourself .

Dear Customer,

Please carefully read this manual bef ore using the

dish washer, it w ill help you use and maintain the

dishwasher properly.

Pass it on to any subsequent owner of the applianc e.

This ma nual con tains sections on safety Instru ctions,

Operating Instru ction s, Installation Ins tructions and

Trou bleshoo ting Tips, etc.

The manufacture r, following a policy of con stant

dev elopment and updating of the product, may

make modifications without giving prior notice.

This user ma nual shall also be got from the

manufacturer or responsible vendor.

Keep this manual for future reference.

If you can not solve the problem s by yourself ,

please ask for the help of professional technicians.

1) Safety Instructions....................................1-4

2) Quick user guide..........................................5

3) Operating Instructions.................................6

4) Prior to first time use....................................7

5) Preparing and loading dishes.....................12

6) Starting a washing program.......................14

7) Maintenance and cleaning..........................16

8) Installation Instruction...............................18

9) Troubleshooting Tips.................................21

Loading the baskets according t o En50242

Control Panel....................................................6

Dishwasher Features.........................................6

A.Water Softener...............................................7

B.Loading the Salt into the Softener....................8

C.Filling the Rinse Aid Dispenser........................8

D.Function of Detergent.....................................9

Recommendations for loading and unloading

the dishwasher................................................12

Standard loading pattern..................................13

Wash Cycle Table............................................14

Turning on the Appliance..................................14

Changing the Program mi d-cycle.. ....................15

At the end of the Wash Cycle.............................15

Filter System...................................................16

Caring for the Dishwasher.................................17

Positioning the Appliance.................................18

About Power Connection..................................18

Water connection.............................................19

Start of dishwasher..........................................20

Before calling for service..................................21

Error codes ....................................................22

Technical information.......................................23

This appliance is intended to be used in household

and similar applications such as:

-staff kitchen areas in shops, offices and other

working environments;

-farm houses;

-by clients in hotels, motels and other residential type

environments;

-bed and breakfast type environments.

This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision

or instruction concerning use of the appliance in a

safe way and understand the hazards involved.

Children shall not play with the appliance. Cleaning

and user maintenance shall not be done by children

without supervision.(For EN60335-1)

Packaging material could be dangerous for children!

This appliance is for indoor household use only.

To protect against the risk of electrical shock,

do not immerse the unit, cord or plug in water or

other liquid.

Please unplug before cleaning and performing

maintenance on the appliance.

Use a soft cloth moistened with mild soap, and then

use a dry cloth to wipe it again.

When using your dishwasher,

follow the precautions listed below:

This appliance must be earthed. In the event of a

malfunction or breakdown, earthing will reduce the

risk of an electric shock by providing a path of least

resistance of electric current. This appliance is

equipped with an earthing conductor plug.

The plug must be plugged into an appropriate outlet

that is installed and earthed in accordance with all

local codes and ordinances.

Improper connection of the equipment-earthing

conductor can result in the risk of an electric shock.

Check with a qualified electrician or service

representative if you are in doubt whether the

appliance is properly grounded.

Do not modify the plug provided with the appliance;

If it does not fit the outlet.

Have a proper outlet installed by a qualified electrician.

Do not abuse, sit on, or stand on the door or dish

rack of the dishwasher.

Do not operate your dishwasher unless all enclosure

panels are properly in place.

Open the door very carefully if the dishwasher is

operating, there is a risk of water squirting out.

Do not place any heavy objects on or stand on the door

when it is open. The appliance could tip forward.

When loading items to be washed:

1) Locate sharp items so that they are not likely to

damage the door seal;

2)Warning: Knives and other utensils with sharp points

must be loaded in the basket with their points

down or placed in a horizontal position.

Check that the detergent powder is empty after

completion of the wash cycle.

Do not wash plastic items unless they are marked

dishwasher safe or the equivalent.

For check the

manufacturer's recommendations.

Use only detergent and rinse agents recommended for

use in an automatic dishwasher.

The door should not be left open, since this could increase

the risk of tripping.

If the supply cord is damaged, it must be replaced by the

manufacturer or its service agent or a similarly qualified

person in order to avoid a hazard.

During installation, the power supply must not be

excessively or dangerously bent or flattened.

Do not tamper with controls.

The maximum number of place settings to be washed

is 10.

The maximum permissible inlet water pressure is 1MPa.

The minimum permissible inlet water pressure is 0.04MPa.

facing

“ ”

unmarked plastic items not so marked,

Never use soap, laundry detergent, or hand washing

detergent in your dishwasher.

The appliance needs to be connected to the main water

valve using new hose sets. Old sets should not be reused.

This appliance's packaging materials are recyclable.

Dispose of the packaging into a suitable waste

collection container to recycle it.

It is prohibited to dispose of this appliance as

household waste.

Correct Disposal of this product: this symbol on the

product or in its packing indicates that this product

may not be treated as household waste. Instead,

it should be taken to the appropriate waste collection

point for the recycling of electrical and electronic

equipment. By ensuring this product is disposed of

correctly, you will help prevent potential negative

consequences for the environment and human health,

which could otherwise be caused by the inappropriate

waste handling of this product.

For more detailed information about the recycling of

this product, please contact your local council your

household waste disposal service, or the shop where

you purchased the product.

For disposing of package and the appliance please

go to a recycling centre. Therefore cut off the power

supply cable and make the door closing device

unusable.

Cardboard packaging is manufactured from recycled

paper and should be disposed in the waste paper

collection for recycling.

By ensuring this product is disposed of correctly, you

will help prevent potential negative consequences

for the environment and human health, which could

otherwise be caused by inappropriate waste handling

of this product.

For more detailed information about recycling of this

product, please contact your local city office and your

household waste disposal service.

DISPOSAL: Do not dispose this product as unsorted

municipal waste. Collection of such waste separately

for special treatment is necessary.

For detailed operating method read the corresponding conte nt on the instruction manual.

(On models with water softener system only.)

Electric indicator on control panel (if provided).

If there is no salt warning light in the control panel

(for some models), you can estimate when to fill the salt into

the softener by the number of cycles the dishwasher has run.

Check the regeneration

salt level

Load the baskets

Select a program

Running the dishwasher

To lo ad the baskets, ref er to the section entitled Loa ding th e Dishwasher Baskets .“ ”

Switch on the appliance

Switch off the appliance

Turn off the water tap,

unload the baskets

Warning: wait a few mi nutes (about 15 m inutes ) before unlo ading the di shwasher to avoid

hand ling th e dish es and utensils wh ile the y are s till hot and m ore susceptible to break .

The dishes will al so dry better. First start unload ing th e lowe r basked.

Changing the program

Add forgotten dishes in the

dishwasher.

If the appliance is switched

off during a wash cycle.

Open the do or carefully.

Hot st eam may esc ape

when the do or is opened!

If the appliance is switched off during a wash cycle, when switched

on again, please re-select the washing cycle and operate the dishwasher

according to the original Power-on state ).

1. A running cycle can only be modified if it has been running for a short time. Otherwise the detergent

may have already been released and the water already drained. If this is the case, the detergent

dispenser must be refilled.

2. Press the Start/Pause Button to stop washing , Then press programme button after 3 seconds,

the program will cancel.

3. Turn the selector to select a new program.

4. .Press the Start/Pause Button, the dishwasher will run after 10 seconds.

1.Press the Start/Pause Button to stop the washing.

2.Open the door a little .

3.After the spray arms stop working, you can open the door completely.

4.Add forgotten dishes.

5.Close the door

6.Press the Start/Pause Button, the dishwasher will run after 10 seconds.

Turn on the water tap and press the Start/Pause Button. The machine will start working

after about 10 seconds.

Close the door, press the program button until the selected program indicator lights up.

( See the section entitled Operation instruction )“ ”

Press the On/Off button to switch on the appliance, Open the door.

When the working cycle has finished, the buzzer of the dishwasher will sound 8 times, then stop.

Turn off the appliance using the On/Off Button.

Since the appliance is standing by, it will power off automaticly after 30 minutes without any operation.

With each wash cycle.

Compartment

For programmes with pre-wash only.

(Follow the user instructions!)

Electric indicator on control panel (if provided).

Check the rinse aid level

Fill the detergent dispenser

before using it for the first time.

To get the best performance from your dishwasher, read all operating instructions

Back ViewFron t view

Lower basket

Salt co ntainer

Dispenser

Cup shelf

Spray a rms

Filter assembly

Inlet pipe connector

Drain pipeUpper basket

Cutlery rack

Inner pipe

1.On/Off Button: Turn on/off the power supply.

3.Delay Button :Press the button to add delay time.

2.Program Button : Press the button to select a

wash Program.

8.Display screen: Show the time

and the state(running state, delay time etc )

remaining

Rinse A id indica tor:

Indicates when t he dispenser needs to be refilled.

Add salt indi cator:

Indi cates when t he dispenser needs to be refilled.

Faucet indicator:

Shows that t he faucet has not been opened.

Delay time ,Remain time ,or e rror codes indicator:

4.Halflo adB utto n:Press the button to select half load

function,after having selected the wash program.

6.Start /Pause butto n: To start the selected

washing p rogram or to pause the washing progr am

when the machine is working.

5. Extra Drying : Press the button to select Extra D rying

function,The resp onse indicator will blink.

7.Child lock button: Press 3 and 4 buttons simultaneo

usly to lock the appliance and to prevent

children from accidentally changing the

dishwasher cycle or starting the dishwasher.

The water softener must be set manually, using the water hardness dial.

The water softener is des igned to remove minerals and salts from t he water, which would have

a detrimental or adverse effect on the operation of the appliance.

The more minerals there are, the harder your water is

The softener sho uld be adjusted according to the hardness of the water in your area. Your local Water Authority

can advise you on the hardness of the water in your area.

Adjusting Salt Consumption

The dishwasher is designed to allow for adjustment in the amount of salt co nsumed based on the hardness of

the water used. This is intended to optimise and customise the level o f salt consumption.

WATER SOFTENER

The hardness of the water varies from place to place. If hard water is used in the dishwasher, de posits will

form on the dishes and utensils.

The appliance is equipped with a special softener that uses a salt container specifically designed to eliminate

lime and minerals from the water.

Contact your local water board for information on the hardness of your water supply.

If your model does not have any water softener, you may skip this section.

Clark: British degree

fH: French degree

dH: German degree

dH=1.25 Clarke=1.78 fH=0.178mmol/l

The manufactory setting: H3 (EN 50242)

Before using your dishwasher for the first time :

A. Set the water sof tener

B. Add 1.5Kg dishw asher salt an d then full fill the salt con tainer with water

C. Fill the rinse aid dispenser

D. Fill in detergent

Please follow the steps below for adjustment in salt consumption.

1. Switch on the appliance;

2. Pre ss the Start/ Pause butto n for mo re than 5 seconds to start the water

softener s ettin g mode (to be done within 60 se conds after the a ppliance is switched on;

3. Press the Start/ Pause button to sele ct the proper setting dep ending on the ha rdne ss

of you r local water, the setting s will change in the following

se que nce : H1 ->H2->H3->H4- >H5->H6;

4. To end the setti ng mode, eit her press the On/Off button o r wa it 5 seconds .

mmol/l

0~90~5 0~0.94

10-20

6-11

1.0-2.0

21- 3012-17 2.1-3.0

0~6

7-14

15-21

Clarke

WATER HARDNE SS

Selector Po si ti on

Salt consumption

(gram/cycl e)

18-22 31-40 22-28 3.1-4.0

41- 6023-34 4.1-6.0

29-42

35-55 61-98 43-69 6.1-9.8

1. The salt contai ner must only be refilled when the salt warning light in the control panel comes on.

Depending on how well the salt dissolves, the salt warning light may still be on even though the

salt container is filled.

If there is no salt warning light in the con trol panel (for some Models),you can estim ate when to fill

the salt into the softener by the cycles that the dishwasher has run.

I f sal t has spilled, run a soak or quick program to remove it.

Always use salt intended for dishwasher use.

The salt container is located beneath the lower basket and should be filled as explained

in the following:

Warning!

Only use salt spe cifically designed for ! Every other type o fdishwashers use

salt not specifically desig ned fo r , e specially table salt, willdishwasher use

damage the water softener. In case of damages caused by the use of unsuitable

salt the ma nufacturer does not give any warranty nor is liable for any damages caused.

Only fil l with salt just before starting one of the co mp lete washing p rograms.

This will prevent any grains of salt or salty wate r, which ma y have been spilled,

remaining on the bottom of the machine for any period of time, which may cause

corrosion.

with water, It is normal for a small amount of wa te r to

come out of the salt container.

Fill the salt container to it s maximum limit

A After the low er basket has been removed, unscrew and remove the cap from the salt container.

B Pl ace the end of the funnel (supplied) into the hole and about 1.5kg of dishwasher salt.

poo r in

D Af ter fil ling the container ,

screw back the cap tightly.

E The sal t warning light will stop being after th e salt contain er has be en filled with salt.

F Imm ediately after filling the salt into the salt container, a washing program should be started

program Other wise the filter system, pump or ot her important parts of the machine may be damaged

by salty water. This is out of warranty.

(We su ggest to use a short

The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes, which can

leave spots and streaks. It also improves drying by allowing w ater to roll off the dishes. Your dishwasher is

designed to use liquid rinse aids. The rinse aid dispenser is located inside,on the door an d next to the detergent dispens er.

To fill the dispenser, open the cap and po ur the rinse aid into the dispenser u ntil the level indicator turns completely

black. The volume of the rinse aid container is about 110ml.

Rinse Aid Dispenser

Function of Rinse Aid

Warning!

Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with any other substances

(e.g. Dishwasher cleani ng agent, liquid dete rgent). This would damage the appliance .

Rinse aid is automatically added d uring the last rinse, ensuring thorough rinsing, a

spot and streak free drying.

To open the dispenser, turn the cap to the "open" (left) arrow and lift it out.

Carefully pour in the ri nse-aid into it s dispenser, wh ilst avoiding it to overfl ow.

Replace the cap by inserting it aligned with "open" arrow and turning it to the closed (right) arrow.

Adjusting Rinse Aid Dispenser

The rinse aid dispenser has six or four set tings. Always st art with the dispe nser

set on "4". If spot s and poor drying are a problem, increase the amount of rinse

aid dispensed by removing the dispenser lid and rotating the dial to "5". If the

dishes still are not drying properly o r show spots, adjust the dial t o the next

high er lever until your dishes are spot-free. The recommen ded setting is "4".

(Factory value is "4".)

Increase the dose if there are drop s of water o r lime spots on the dishes after washing.

Reduce it if there are sticky whitis h stains on your dish es o r a bluish fil m on glassware or

knife blad es.

As the rinse aid diminishes, the size o f the black dot

on the rinse aid level indicator changes, as illustrated b elow.

Full

3 / 4 full

1 / 2 full

1 / 4 full - Should refill to eliminate spotting

Empty

When to Refill the Rinse Aid Dispenser

Un less the rins e-ai d warning light o n th e control panel is on , you ca n always estimate the amount from the color

of the optical level indicator "C "loc ated next to the cap. When the rinse-aid container is full , the indicator

wi ll be fully dark. The size of the dark d ot decreases as the rinse-aid diminishes . You should never let

the rinse aid level be le ss than 1/4 full.

during the next wash. Don't forget to replace the cap before you close the dishwasher door.

Clean up any spilled rinse a id

with an absorbent cloth to avoid excessive foaming

The chemical ingredients that c ompose the detergent are necessary to remove, crush and dispense all dirt out of

the dishwasher. Most of the commercial qua lity detergents are suitabl e for this purpose.

" "

Proper Use of Detergent

Use only det ergent specifically made for . Keep your detergent fresh and dry.dishwasher use

Don't put powdered detergent into the dispenser until you are ready to wash dishes.

Warning!

Amount of Detergent to Use

Based on their chem ical composition, deterge nts can be split in two basic types:

Detergent tablet s of different brands disso lve at different speeds. For this reason some

detergent tablets cannot dissolve and develop their full cleaning power during short

programs. Therefore please use long programs wh en usin g detergent tablets, to

ensure the complete rem oval of detergent residuals.

The dispenser must be refilled before the start of each wash cycle following the inst ructions

provided in t he wash cycle table . Your dis hwa sher uses less de tergent and rinse aid than

Conventiona l dishwasher. Generally, only one tablespoon of detergent is needed for

a normal wash load. More heavily soiled items need more detergent. Always ad d the

detergent just before starting the dishwas her, otherwise it could get damp and w ill not

dissolve properly.

Concentrated Detergent

Detergent Tablets

Detergent Dispenser

co nventional, alkaline detergents with caus tic components

low al kalin e co ncentrated detergents with natural enzym es

Normally new pulverised detergent is without phosphate. T hus the water softener function of

phosphate is not given. In this case we recommend to fill salt in the salt containe r even w hen

the hardness of water is only 6 dH. If detergents without phosphate are used in the case of hard water

often white spots appear on dishes and glasses. In this case please add more detergent to reach

better results. Detergent s without chlorine do only bleach a little. Strong and coloured spots will not

be removed completely. I n this case please choose a program with a higher temperature.

Detergents

There are 3 sorts of d etergents

1.With phosphate and with ch lorine

2.With phosphate and without chlorine

3.Withou t phosphate and without chlorine

Always add the detergent just before starting each wash cycle.

Only use branded detergent aid for dishwasher.

If the lid is closed: press release button. The lid will spring open.

De tergent tabl et

De tergent pow der

Push latch to open

Dishwasher detergent is corrosive!

Take care to keep it out of reach of children.

Fill the detergent dispenser with detergen t.

The marking indicates the dosing levels , as

illustrate d on the right:

Place the main wash cycle detergent h ere.

Place the pre-was h cycle d etergent here.

Plea se observe the manufacturer s dosing and storage

Recommendations as stated on the detergent packagi ng.

Close the lid and press on i t until it locks into pl ace.

If the dishes are heavily soiled, place an a dditiona l

detergent do se in the pre-wash detergent chamber. This detergent will take effect during the pre-wash phas e.

Filling the detergent dispenser

A B

You information about the amount of detergent for th e single programme on p age 14.

will find

Be aware that depending on the so iling of wate r, se tting may be different.

Please observe the manufacturer's recommendations on the detergent packaging.

Cutlery with wooden, horn china or

mother-of-pearl handles

Plast ic items that are not heat resistant

Older cutlery with glued parts t hat are not

temperature resistant

Bonded cutlery items or dishes

Pewter or copper items

Crystal glass

Steel items subject to rusting

Wooden platters

Items made from synthetic fibres

Some types of glasses can become

dull after a large number of washes

Silver and aluminum parts have a

tendency to discolour during washing

Glazed patterns may fade if machine

washed frequently

Are not suitable

Are of limited suitability

Dishes and items of cutlery must not lie inside one anot her, or cover each other.

The upper basket is designed to ho ld more delicate and lighter dishware suc h as glasses , coffee

and tea cups

Long bladed knives stored in an upright position are a potential hazard!

Long and/or sharp items of cutlery such as carving knives must be positi oned

horizontally in the upper basket.

Please do not ove rload your dishwasher. This is important for good results and for

reasonab le consumption of energy.

To avoid damage, glasse s should not touch one another.

Load large a nd difficult t o clean items in t he lower basket.

Load hollow items such as cups, glasses, pans etc. With the opening facing downwards so that

water cannot collect in the container or a deep b ase.

Consider buying utensils which are identified as dishwasher-proof.

Use a mild detergent that is described as 'kind to dishes'. If necessary, seek further

information from the detergent manufacturers.

For particular items, select a program w ith

To prevent damage, do not take glass a nd c utlery out of the dishwasher immediately

after the programme has ended.

the lowes t po ssible te mpe rature.

(For best performance of the dishwasher, follow the se loading guidelines.

Features and appearance of baskets and cutlery ba skets may vary from your model.)

Scrape off any larg e amounts o f leftover food. Soften remnants of burnt food in pans.

It is not necess ary to rinse the dishes under running water.

Place objects in the dishwasher in following way:

1.Items such as cups, glasses, pots /pans, etc. are faced dow nwards.

2.Curved items, or ones with recesses, should be loaded aslant so th at water can run off.

3.All utensils are stacked securely and can not tip over.

4.All utensils are placed in the way that the spray arms can rotate freely during washing.

Very small items should not be washed in the dishwasher as they could easily fall out of the basket.

To prevent water dripping from the uppe r basket into the lower basket, we recommend that you

empty the lower basket first

, followed by the

upper basket.

The upper basket is designed to hold m ore delicate

and lighter dishware such as glasses, coffee and

tea cups and saucers, as well as pl ates, small bowls

and shallow pans (as l ong as they are not too dirty).

Positi on the dishe s and cookware so that they w ill

not get moved by the spray of wate r.

Pots, serving bowls, etc, must always be placed top down.

Deep pots should be slanted to allow water to flow out.

Please be reminded that:

The Botto m Basket features folding spikes so that larger or more pots and pans can be loaded.

The height of the u pper rac k ca n be eas ily adjusted to

accommodate talle r dis hes in e ithe r the upp er and lowe r

ra ck.

The hei ght of the upper basket can be adjusted

by placing the wheels on different height of the rails.

They do not nest together.

Silverware is placed with the male face up.

Long utensils in the middle.

For bett er s tacking o f cups, the shelves c an be

folded d own as s how in the picture b elow.

WARNING!

Do not let any item extend through bottom.

Always load sharp utensils with the sharp

pointing down!

We suggest that you place large items and the most

difficult to clean items

pans, lids, servi ng dishe s an d b owls, as shown

in the figure below. It is preferable to place serving

dishes and lids on the side of the racks in order to

avoid blocking th e rotation of the top s pray arm.

in to t he lower bas ket:

such as

pots,

The maximum diameter advised for plates in front of

the detergen t dispenser is of 1 9 cm, this not to

hamper the open ing of it

For a top quality cleaning, place the silverware in the basket making sure th at:

Cutlery should be placed in the cutlery rack separatelyfrom each other in the appropriate positions, and do

make sure the utensils do not nest together, this maycause bad performance.

For better stacking of pots and pans, the spikes can be

folded do wn as show in the picture .

below

*EN 50242 : This program is the test cycle. The information for comparability test

in accordance with EN 50242, as follows:

Capacity: 10 setting

Position Upper baske t: lowest position

Rinse aid setting: 6

PI:0.49W; P :0.45W.

Left-on mode duration: Power will be cut off automatically after program finished for 30 minutes.

Means : Rinse-aid dispenser needs to be filled.

( )

Intensive

Normal

(* E N 50242)

Rapid

Glass

3/22g

20g

3/22g

25g

90 Min

Soa k

For normally soiled loads,

such as , plates,glasses

and lightly soiled pans.

pots

For heaviest soiled crockery,

and normall y soiled pots

pans dishes etc with dried

on soiling.

、

For lightly soiled loads that

do not need excellent drying

efficiency.

A shorter wash for lightly

soiled loads and quick wash.

For lightly soiled crockery

and glass

Wash (45 )

Rinse

Rinse (55 )

℃

(50 )℃

175

192

165

1.1

0.75

1.4

0.7

16.5

Wash(65 )

Rinse

Rinse (65 )

Drying

℃

90 11.5

1.15

Pre-w ash

wash( 40 )

Rinse

Rinse(60 )

Drying

℃

125

0.75 13.5

Prewash 50

Wash 65

Rinse

Rinse 70

Drying

（

℃ ）

（

℃）

（

℃）

Prewash(45 )

Wash (55 )

Rinse

Rinse (65 )

Drying

℃

Prewash

Wash (45 )

Rinse(65 )

Drying

℃

This is standard programme, it is

suitable to clean norm ally soiled

tableware and it i s the most efficient

programme in terms of its c ombi ned

energy and w ater consum ption for

that type of tableware.

A shorter wash for lightly

soiled loads t hat do not

need dryi ng.

Prewash

0.02

3.5

Starting a cycle wash

Draw out the lower and upper basket, load the dishes and push them back.

It is load the lower basket first , then the upper one (see the section entitled

Loading the Dishwasher ).

Pour in the detergent (see the section entitled Salt, Detergent and Rinse Ai d ).

Insert the plug into the socket. The power supply is 220-240 VAC /50 HZ, the specification

of the socket is 10A 250VAC. Make sure that the water supply is turned on to full pressure.

Close the door, press the On/Off button to switch on the machine.

Press the program button , the wash program will be changed as follows direction:

. Then press the Start/Pause button

recommended to

turn on t he

dishwasher will start its cycle.

“ ”

Intensive->Normal->ECO->Glass ->Rapid ;->90 Min ->Soak

If a program is selected, the response light will

If your model has broken remember function, the machine will go on to finish the selected

program .after the power cut

When the working cycle has finished, the buzzer of the dishwasher will soun d for 8 seconds, then stop. Turn off

the appliance using the ON/OFF button, shut off the water supp ly and open the door of the dishwashe r.

Wait for a few minutes before unloading th e dishwasher to avoid ha ndling the dishes and utensils while they

are still hot and more susceptible to break . They will also dry better.

Switching Off the Dishwasher

The program light is on but is not blinking,

1.Switch off the dishwasher by pressing the On/Off Button.

2.Turn off the water tap!

only in this case has the program en ded.

Open the door carefully.

Hot dishes are sensitive minutes before removing from

the appliance.

Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In this way they

will be cooler and the drying will be improved.

shocks. The dishes should cool down for around 15

Unloading the dishwasher

Empty the lower basket first and then the upper one. This will avoid water dripping from the upper Basket onto

the dishes in the lower one.

It is normal for the dishwasher to be wet inside.

If you open the door , the machine will pause. The program light will

stop blinking and the buzzer will mooing every minute unless you close the door . After

you close the door ,the machine will keep on working after 10 seconds.

dur ing a wash cycle

A forgotten dish can be added any time before the detergent cup opens.

Add forgotten dishes.

Close the door

After the spray arms stop working, you can open the door

completely.

Open the door a little .

Press the Start/Pause Button to stop the washing.

Press the Start/Pause Button. The d ishwasher will run

after 1 0 seconds.

It is dangerous to open the door mid-cycle,

as hot steam may scald you.

Changing the Program Mid-Cycle

Premise:

A running for a short time. Otherwise, the

detergent may have already been released, and the appliance may have already drained the wash water.

If this is the case , the detergent dispenser must be refilled (see the section entitled " Loading the

Detergent " ).

running cycle can only be changed if it has only been

Press the Start/Pause button , the machine will pause, press the pro gram button more than 3s then you

can change the program to the desired cycle setting (s ee the section entitled " Starting a wash cycle. . ." ).

When you press the Start/Pause button to pause during washing, the will

stop blinking and the dishwasher will mooing every minute unless you press the

Start/Paus e button to start.

running indicator

The filter prevents larger remnants of food or other objects from getting insi de the pump.

The residues may block the filter, in this case they must be rem oved .

The filter system consists of a coarse filter,a flat (Main filter)

And a microfilter(Fine filter).

Food and soil particles trap ped in this filter are pulverize d by a

special jet on t he lower spray arm and w ashed down to drain.

La rger items, such as p ieces of bones or glass, that could block

the drain are trapped in the coarse filter. To remove the items

caught by the filter, gently sque eze the tap on th e top of this

filter and lift out.

This filter holds soil and food residues in the sump a rea a nd

Prevents

them from being redeposited on the dishes during wash cycle.

Main filter

Coarse filter

Fine filter

Filter assembly

The filter efficiently

For best performance and results, the filter must be cleaned regularly. this reason, it is a good idea to

remove the larger food particles trapped in the filter after each wash cy cle by rinsing the sem icircular filter and

cup under running water. To remove the filter device, pull the cup handle in the upward direction.

remo ves food particles from the wa sh w ater, allowing it to be rec ycle d during the cycle.

For

The dishw ash er must never be used without the filters.

Impro per replacement of the filter may reduce the performance level of the appliance

and damage dishes and utensils.

Step 1 Turn the：

filter counterclockwise,

Step 2 lift the filter assy up：

When following this procedure from step1 to step 2, the filter system will be removed;

when following it from Step 2 to Step 1, the filter system will be installed.

The control pane l can be cleaned by using a lightly dampened cloth.

After cleaning, make sure to dry it thoroughly.

For the exterior, use a good appliance polish w ax.

Never use sharp objects, scouring pads or har sh cleaners on a ny part of the dishwasher.

Warning

1 .Cut off the electrical power to the dishwasher at the supply source.

2. Turn off the water supply and disconnect the water inlet pipe from the water valve.

3. Drain t he water from the inlet pipe and water valve. (Use a pan to gather the water)

4. Reconnect the water inlet pipe to the water valve.

5. Remove the filter at the bottom of the tub and use a sponge to soak up water in the sump.

please take frost protection measures on the dishwasher in winter. Every fter washing cycles,

please operate as follows

time a

：

Cleaning the Filter

Cleaning the Door

To clean the coarse fi lter and the fine filter, use a cleaning brush. R eassemble the filter parts as shown in the figures

on the last page and reinsert the entire assembly in the dishwa sher, positioning it in its seat and pressing downwards.

When cleaning the filters, Otherwise, the filters could be

contorted and the performance of the dishwasher could be decreased.

do not knock them.

To cle an the edge around the door, you

To avoid penetration of water into the door lock and electrical components, do not

use a spray cleaner of any kind.

should only use a soft, ward and damp

cloth.

Never use a spray cleaner to clean the door panel as it may dam age the door lock

and electrical components.

Abrasive ag ents or some paper towels shou ld not be used because of the risk of

scratching or leaving spots on the stainl ess steel surface.

Cleaning the Spray Arms

If your dishwasher cannot work because of the ice,

please contact professional service persons.

It is necessary to clean the spray arms re gularly fo r hard

wate r che micals will clog the sp ray arm jets a nd bearings.

- After each cycle, check for any debris in the filter to avoid future blockag e.

- By unscrewing the coarse filter, you can remove the filter system . Remove any foo d remna nts and

clean the filters under running water.

Remarks:

The entire filter assembly should be cleaned once a week.

To remove the lower spray arm, pull out the spray arm u pward.

To remove the upper spray arm, hold the nut, rotate the arm

clockwise to r emove it.

Wash the arms in soapy and warm water and use a soft brush to

clean the jets. Replace them after rinsing them thoroughly.

It is recommend that you run a wash cy cle with the

dishwasher empt y an d the n remove the plug from the

sock et, turn off the wa ter supply and leave the door of

the appliance slightly open. This w ill help the d oor

seals to last longer and prevent odours from forming

within the appliance.

If the appliance must be moved, try to keep it in the

vertical position. If absolutely necessary, it can be

positioned on its back.

One of the factors that cau se odours to form in the

dishwasher the seals.

Periodic cleaning with a damp sponge will prevent this

from occurring.

is rema ining food strapped i

Before cleaning or performing maintenance, always

remove the plug from the socket.

To clean the exterior and rubber p arts of the di shw asher,

do not use solvents or abrasive cleaning products.

Only use a clo th with warm so apy water.

To rem ove spots o r stains from the surface of the

interior, use a cloth da mpened with water an a little

vinegar, or a cleaning pro duct made specifical ly for

dishwashers.

Remove the Plug

No Solvents or Abrasive Cleaning

Moving the Appliance

Seals

After every wash, turn off the water supply to the

appliance and leave the door slightly op en so that

moisture and odours are not tra pped inside.

After Every Wash

When not in Use for a lo ngTime

Ensure the voltage and frequency of the p ower being correspond s to

those on the rating plate.Only insert the plug into an electrical socket which is earthed

prop erly. If the el ectrical socket to which the appliance must be connected is not

appropriate for the plug , replace the socket, rather than using a adaptors or the like as

they could cause overheating an d burns.

Plea se look at th e rating label to know the rating voltage and connect the dishwasher to the appropriate power suppl y.

Use the required fuse 10 amp, tim e delay fuse or c ircui t breaker recommended and provide separate circuit serving

only this appliance.

Position the appliance in the desired location. The back should rest against the w all behind it, and the sides,

along the adjacent cabinets or walls. The dishwasher is equipped with water supply and drain hoses th at can

be positioned either to the righ t or the left s ides to facilitate proper installation.

Once the appliance is positioned for levelling, the height of the dishwasher

level of the feet .

ma y be altered by adjusting the screwing

For personal safety:

Do not use an extension cord or an adapter plug

with this appliance.

Do not, under any circumstances, cut or remove

the earthing connection from the power cord.

Page is loading ...

Brandt DFS1010W, DFS1010X Owner's manual

Related papers

Other documents