AV70*
LV70*
ANALOGUE
Series
2
English
Contents
Safety Precautions ....................4
Air Circulation ...................................... 4
Heat Damage ...................................... 4
Power Supply ...................................... 4
Do ........................................................ 4
Do not .................................................. 4
Installation and important
information .................................5
Where to install.................................... 5
EXCLUSION CLAUSE ........................ 5
The Remote Control ..................6
Inserting batteries and ......................... 6
effective range of the remote ............... 6
Connecting External
Equipment ..................................7
Connecting an HDMI or DVI
device to the HDMI input ...........9
To connect an HDMI device ................ 9
To connect a DVI device...................... 9
Acceptable Video signals through HDMI
terminals .............................................. 10
Acceptable PC signals through
HDMI-1/D-SUB terminals .................... 10
Connecting a Computer ............11
To connect a PC to the
RGB/PC terminal ................................. 11
To connect a PC to the
HDMI terminal ..................................... 11
Using the Controls ....................12
Switching On ....................................... 13
Using the Remote Control ................... 13
Using the Controls ............................... 13
Startup Application ...................14
Quick Setup ......................................... 14
Auto Tuning ......................................... 14
Manual Tuning ..................................... 15
Watching TV Programmes .................. 16
Changing the Position ......................... 17
Displaying the On-screen
Information .......................................... 17
General Controls .......................18
Selecting Channels ............................. 18
The Time Display – analogue only ...... 18
Stereo and Bilingual Transmissions .... 18
Subtitles............................................... 18
Using the Quick Access (Except PC) .. 18
Using the Quick Access (PC Only) ...... 18
Sound Controls ..........................19
Volume controls and mute sound ........ 19
Dual ..................................................... 19
Bass, Treble and Balance ................... 19
Stable Sound
®
..................................... 19
Surround.............................................. 19
Bass Boost .......................................... 19
Widescreen viewing ..................20
Available Picture Size and
Position Control ................................... 21
Picture Controls .........................22
Picture Position ................................... 22
Picture Mode (Except PC) ................... 22
Picture Preferences ............................. 22
Reset ................................................... 22
3D Colour Management ...................... 22
Base Colour Adjustment ...................... 23
Colour Temperature ............................. 23
Active Backlight Control ...................... 23
Black/White Level ................................ 23
Digital Noise Reduction ....................... 24
MPEG NR – Noise Reduction ............. 24
Cinema Mode ...................................... 24
Reset Picture Settings ......................... 24
Auto Format (Widescreen) .................. 24
3
English
4:3 Stretch ........................................... 24
Blue Screen ......................................... 24
Side Panel ........................................... 24
Picture still ........................................... 24
Enjoying Photo through
USB Port .....................................25
Photo Viewer specications ................ 25
Opening Photo Viewer ........................ 25
Viewing Photo Files ............................. 25
Enjoying Music through
USB Port .....................................26
Music Player specications ................. 26
Opening Music Player ......................... 26
Playing Music Files.............................. 26
Media USB Port................................... 26
Other features ............................27
Panel Lock........................................... 27
Sleep Timer ......................................... 27
On Timer .............................................. 27
On Timer Position ................................ 27
Text Services and
Text Information .........................28
Selecting modes .................................. 28
Navigating Pages using Auto .............. 28
Navigating Pages using LIST .............. 28
Control Buttons.................................... 28
PC Settings ................................29
Horizontal and Vertical Position........... 29
Sampling Clock ................................... 29
Clock Phase ........................................ 29
Reset ................................................... 29
Input Selection and
AV Connections .........................30
Input Selection..................................... 30
Input Signal Selection.......................... 30
HDMI 1 Audio ...................................... 30
Frequently Asked Questions ....31
Specications and
Accessories ...............................33
4
English
Safety Precautions
This equipment has been designed and manufactured to meet international safety standards but, like
any electrical equipment, care must be taken to obtain the best results and for safety to be assured.
Please read the points below for your own safety. They are of a general nature, intended to help with all
electronic consumer products and some points may not apply to the goods you have just purchased.
The Class I apparatus shall be connected to a mains socket outlet with a protective earthing
connection.
Air Circulation
Leave more than 10cm clearance around the
television to allow adequate ventilation. This
will prevent overheating and possible damage
to the television. Dusty places should also be
avoided.
Heat Damage
Damage may occur if the television is left in
direct sunlight or near a heater. Avoid places
subject to extremely high temperatures or
humidity. Place in a location where the tem-
perature remains between 5°C (41°F) min. and
35°C (94°F) max.
Power Supply
The mains supply required for this equipment
is 220-240v AC 50/60Hz. Never connect to a
DC supply or any other power source. DO en-
sure that the television is not standing on the
mains lead. Use only the supplied lead.
DO NOT cut off the mains plug from this
equipment, this incorporates a special Radio
Interference Filter, the removal of which will
impair its performance. In the UK, the fuse
tted in this plug is approved by ASTA or BSI
to BS1362.
It should only be replaced by a correctly rated
and approved type and the fuse cover must be
retted.
IF IN DOUBT PLEASE CONSULT A COMPE-
TENT ELECTRICIAN.
Do
DO read the operating instructions before you
attempt to use the equipment.
DO ensure that all electrical connections
(including the mains plug, extension leads and
inter-connections between pieces of equip-
ment) are properly made and in accordance
with the manufacturers’ instructions. Switch off
and withdraw the mains plug before making or
changing connections.
DO consult your dealer if you are ever in doubt
about the installation, operation or safety of
your equipment.
DO be careful with glass panels on equipment.
DO NOT REMOVE ANY FIXED COVERS
AS THIS WILL EXPOSE DANGEROUS AND
‘LIVE’ PARTS.
THE MAINS PLUG IS USED AS A DISCON-
NECTING DEVICE AND THEREFORE
SHOULD BE READILY OPERABLE.
Do not
DO NOT obstruct the ventilation openings of
the equipment with items such as newspapers,
tablecloths, curtains, etc. Overheating will cause
damage and shorten the life of the equipment.
DO NOT allow electrical equipment to be
exposed to dripping or splashing or objects lled
with liquids, such as vases, to be placed on the
equipment.
DO NOT place hot objects or naked ame
sources, such as lighted candles or nightlights
on, or close to equipment. High temperatures
can melt plastic and lead to res.
DO NOT use makeshift stands and NEVER
x legs with wood screws. To ensure complete
safety, always t the manufacturers’ approved
stand, bracket or legs with the xings provided
according to the instructions.
DO NOT leave equipment switched on when
it is unattended, unless it is specically stated
that it is designed for unattended operation or
has a standby mode. Switch off by withdrawing
the plug, make sure your family know how to
do this. Special arrangements may need to be
made for people with disabilities.
DO NOT continue to operate the equipment if
you are in any doubt about it working normally,
or it is damaged in any way – switch off, with-
draw the mains plug and consult your dealer.
WARNING – excessive sound pressure from ear-
phones or headphones can cause hearing loss.
ABOVE ALL – NEVER let anyone, especially chil-
dren, push or hit the screen, push anything into
holes, slots or any other openings in the case.
NEVER guess or take chances with electrical
equipment of any kind – it is better to be safe
than sorry.
5
English
Installation and important information
Where to install
Locate the television away from direct sunlight or other strong lights. Soft, indirect lighting is recom-
mended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen.
Place the TV set on a stable, level surface that can support the weight of the TV. In order to maintain stabil-
ity and prevent it from falling over, secure the TV to the level surface using the strap located under the table
top stand, or to a wall using a sturdy tie to the clip on the back of the table top stand.
The LCD display panels are manufactured using
an extremely high level of precision technology,
however sometimes some parts of the screen
may be missing picture elements or have lumi-
nous spots. This is not a sign of a malfunction.
Make sure the television is located in a position
where it cannot be pushed or hit by objects, as
pressure will break or damage the screen, and
that small items cannot be inserted into slots or
openings in the case.
Please take note
EXCLUSION CLAUSE
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i) re;
ii) earthquake;
iii) accidental damage;
iv) intentional misuse of the product;
v) use of the product in improper conditions;
vi) loss and/or damage caused to the product while in the possession of a third party;
vii)
any damage or loss caused as a result of the owner’s failure and/or neglect to follow the in-
structions set out in the owner’s manual;
viii)
any loss or damage caused directly as a result of misuse or malfunction of the product when
used simultaneously with associated equipment;
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or
damage including but not limited to the following, loss of prot, interruption of business, the loss of
recorded data whether caused during normal operation or misuse of the product.
• If stationary images generated by 4:3 broadcasts, text services, channel identication logos, computer
displays, video games, on-screen menus, etc. are left on the television-screen for any length of time they
could become conspicuous, it is always advisable to reduce both the brightness and contrast settings.
• Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the
image at the 4:3 outlines, this is not a defect of the LCD TV and is not covered under the manu-
facturers warranty. Regular use of other size modes (e.g.: Superlive) and varying the “side panel”
brightness (if available on the model) will prevent permanent retention.
SYMBOL SYMBOL DEFINITION
DANGEROUS VOLTAGE: The lightening ash with arrowhead symbol within an
equilateral t riangle is intended to alert the user to the presence of un-insulated
“DANGEROUS VOLTAGE” within the product’s enclosure that may be of sufcient
magnitude to constitute a risk of electric shock to persons.
INSTRUCTIONS: The exclamation point within on equilateral triangle to alert the
user to the presence of important operating and maintenance (servicing) instruction
in the literature accompanying the appliance.
WARNING: To prevent the spread of re, keep candles or other open ames away
from this product at all times.
6
English
12 In TV mode: Display on-screen information
In Text mode: Access the index page
13 Mute the sound
14 Display the quick access menu
15 Exit the menu system
16 No Function
17 Go to the previous level of the menu
18 Display the on-screen menu
19 Menu navigation: ▲, ▼, ◄, ►:
In Text mode: Change the page
OK: Conrm the selection
20 Colour button: Text control buttons
Reveal concealed text
Hold a wanted page
Enlarge text display size
Select a page while viewing a
normal picture
1 Toggle between TV ON or Standby
2 Toggle between external input sources
3 Still Picture
4 To display the teletext screen
5 TEXT subtitle pages if available
6 Stereo/Bilingual transmissions
7 Number buttons
8 No Function
9 No Function
10 Change the volume
11 Change the channel
The Remote Control
Simple at-a-glance reference of your remote
control.
Inserting batteries and
effective range of the remote
Do not combine a used, old battery with a new
one or mix battery types. Remove dead batteries
immediately to prevent acid from leaking into
the battery compartment. Dispose of them in
accordance with instructions on page 34 of this
manual. Warning: batteries must not be exposed
to excessive heat such as sunlight or re.
The performance of the remote control will
deteriorate beyond a distance of ve metres or
outside an angle of 30 degrees from the centre
of the television. If the operating range becomes
reduced the batteries may need replacing.
Remove the back
cover to reveal the
battery compartment
and make sure the
batteries are inserted
the right way round.
Suitable battery
types for this remote
are AAA, 1.5V.
7
English
Connecting External Equipment
Before connecting any external equipment, turn off all main power switches. If there is no switch
remove the mains plug from the wall socket.
Connect the power cord into the AC IN socket found at the back of the TV.
For 19/22AV70**
HDMI 1 INPUT
SOCKET
HDMI 2
INPUT
SOCKET
Note: SCART can support Canal+ decoder.
For 26/32AV70**
HDMI 1 INPUT
SOCKET
HDMI 2 INPUT
SOCKET
Note: SCART1 and SCART 2 can support Canal+ decoder.
8
English
Aerial cables: - - - - - - - - - - - - - - - - - - -
Connect the aerial to the ANT socket on the rear
of the television.
If you use a decoder and/or media recorder, con-
nect through the decoder and/or media recorder
to the television.
SCART cables: - - - -- - - - - - - - - - - - - - -
Connect the video recorder IN/OUT or decoder
TV socket to the television. Connect the media
player SAT socket to the decoder MEDIA REC.
socket.
Before running Auto Tuning put your decoder
and media recorder to Standby.
The phono sockets alongside the COMPONENT
VIDEO INPUT sockets will accept L and R audio
signals.
The phono sockets alongside the VIDEO INPUT
socket will accept L and R audio signals. These
sockets are located on the side of the TV. (See
the next page.)
HDMI
®
(High-Denition Multimedia Interface)
is for use with a DVD, decoder or electrical
equipment with digital audio and video output. It
is designed for best performance with 1080i high-
denition video signals but will also accept and
display 480i, 480p, 576i, 576p, 720p and 1080p.
HDMI1 also support VGA, SVGA, XGA, WXGA
and SXGA.
NOTE: Although this television is able to con-
nect to HDMI equipment it is possible that some
equipment may not operate correctly.
A wide variety of external equipment can
be connected to the back of the television,
therefore the relevant owners manuals for all
additional equipment must be referred to.
If the television automatically switches over to
monitor external equipment, return to normal
television by pressing the desired programme
position button. To recall external equipment,
press to select.
HDMI, the HDMI Logo, and High-Denition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
For 32/40LV70**
HDMI 1 INPUT
SOCKET
HDMI 2 INPUT
SOCKET
9
English
Connecting an HDMI or DVI device to the HDMI input
The HDMI input on your television receives digital audio and uncompressed digital video from an
HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device.
This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme mate-
rial in digital form from EIA/CEA-861-D–compliant [1] consumer electronic devices (such as a set-top
box or DVD player with HDMI or DVI output). For acceptable video signal formats.
Note:
• Some early HDMI equipment may not work properly with your latest HDMI TV, due to the adoption of
a new standard.
Please unplug your HDMI cable rst and then try setting the following options (Lip Sync) to “Off”.
Your early HDMI source should operate properly with your television.
• Supported Audio format: Linear PCM, sampling rate 32/44.1/48kHz.
To connect an HDMI device
Connect an HDMI cable (type A connector) to
the HDMI terminal.
For proper operation, it is recommended that
you use an HDMI cable with the HDMI Logo
( ).
• If your HDMI connection is capable of 1080p
and/or your television is capable of refresh
rates greater than 50Hz, you will need a Cat-
egory 2 cable. Conventional HDMI/DVI cable
may not work properly with this mode.
• HDMI cable transfers both video and audio.
Separate analogue audio cables are not
required (see illustration).
The HDMI 3 terminal is located on the side of
the television.
HDMI OUT
VIDEO AUDIO
L R
R
L
OUT
IN
HDMI cable
HDMI device
For instruction
purposes only
To view the HDMI device video, press the
button to select HDMI 1, HDMI 2 or HDMI 3
mode.
To connect a DVI device
Connect an HDMI-to-DVI adapter cable (HDMI
type A connector) to the HDMI 1 terminal and
audio cables to the PC/HDMI1 (AUDIO) socket
(see illustration).
• The recommended HDMI-to-DVI adapter
cable length is 6.6ft (2m).
• An HDMI-to-DVI adapter cable transfers
video only. Separate analogue audio cables
are required.
For instruction
purposes only
the back of your television
Computer
Audio cable for PC to
television connection
(not supplied)
HDMI-to-DVI
adapter cable
Note:
To ensure that the HDMI or DVI device is reset
properly, it is recommended that you follow
these procedures:
• When turning on your electronic components,
turn on the television rst, and then the HDMI
or DVI device.
• When turning off your electronic components,
turn off the HDMI or DVI device rst, and then
the television.
[1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection,
which is being standardized for reception of high-denition video signals. Because this is an evolving technology, it is possible that
some devices may not operate properly with the television.
HDMI, the HDMI Logo, and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
10
English
Format Resolution V. Frequency H. Frequency Pixel Clock Frequency
480i 720 x 480i 60Hz 15.734KHz 27MHz
480p 720 x 480p 60Hz 31.5KHz 27MHz / 27.027MHz
576i 720 x 576i 50Hz 15.625KHz 27MHz
576p 720 x 576p 50Hz 31.25KHz 54MHz
720p 1280 x 720p 50Hz 37.5KHz 74.25MHz
720p 1280 x 720p 59.94Hz / 60Hz 44.9KHz / 45KHz 74.17MHz / 74.25MHz
1080i 1920 x 1080i 50Hz 28.125KHz 74.25MHz
1080i 1920 x 1080i 59.94Hz / 60Hz 33.72KHz / 33.75KHz 74.17MHz / 74.25MHz
1080p 1920 x 1080p 50Hz 56.25KHz 148.5MHz
1080p 1920 x 1080p 59.94Hz / 60Hz 67.432KHz / 67.5KHz 148.35MHz / 148.5MHz
1080p 1920 x 1080p 24Hz / 25Hz 27KHz / 28.125KHz 74.25MHz / 74.25MHz
1080p 1920 x 1080p 30Hz 33.75KHz 74.25MHz
Acceptable Video signals through HDMI terminals
Format Resolution V. Frequency H. Frequency Pixel Clock Frequency
VGA 640 x 480 59.9Hz 31.469KHz 25.175MHz
VGA 640 x 480 72.8Hz 37.861KHz 31.5MHz
VGA 640 x 480 75Hz 37.5KHz 31.5MHz
VGA 720 x 400 70Hz 31.469KHz 28.322MHz
SVGA 800 x 600 56.2Hz 35.156KHz 36MHz
SVGA 800 x 600 60.3Hz 37.879KHz 40MHz
SVGA 800 x 600 72.1Hz 48.077KHz 50MHz
SVGA 800 x 600 75Hz 46.875KHz 49.5MHz
XGA 1024 x 768 60Hz 48.363KHz 65MHz
XGA 1024 x 768 70Hz 56.476KHz 75MHz
XGA 1024 x 768 75Hz 60.023KHz 78.75MHz
WXGA 1280 x 720 59.8Hz 44.772KHz 74.25MHz
WXGA 1280 x 768 59.8Hz 44.776KHz 79.5MHz
WXGA 1360 x 768 60Hz 47.712KHz 85.5MHz
SXGA 1280x1024 60Hz 63.981KHz 108MHz
SXGA 1280x1024 75Hz 79.976KHz 135MHz
Acceptable PC signals through HDMI-1/D-SUB terminals
HDMI, the HDMI Logo, and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
Note 1 : HDMI 1 terminal supports PC signal input; HDMI 2 and 3 do not support PC signal.
Note 2 : For PC input, for only supported PC signal can show the correct resolution on TV display.
11
English
Connecting a Computer
With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the televi-
sion and hear the sound from the televisions speakers.
To connect a PC to
the RGB/PC terminal
When connecting a PC to the RGB/PC termi-
nal on the television, use an analogue RGB
(15-pin) computer cable and
a PC audio cable for the PC/HDMI1 (AUDIO)
socket. Select PC from the PC/HDMI 1 Audio
options in the AV Connection menu located in
the SETUP menu.
For instruction
purposes only
the back of your televisionComputer
Audio cable for PC to
television connection
(not supplied)
Conversion
adaptor if required
(not supplied)
Mini D-sub
15 pin connector
RGB PC cable
(not supplied)
To use a PC, set the monitor output resolution
on the PC before connecting it to the televi-
sion. For acceptable PC signal formats, see
page 10.
To display the optimum picture, use the PC
setting feature (see page 29).
Note:
• The PC audio input terminal on the television
is shared with the HDMI 1 analogue audio
input terminal.
• Some PC models cannot be connected to
this television.
• An adapter is not needed for computers with
a compatible mini D-sub 15-pin terminal.
• Depending on the DVD’s title and the
specications of the PC on which you are
playing the DVD-Video, some scenes may
be skipped or you may not be able to pause
during multiangle scenes.
• A band may appear at the edges of the
screen or parts of the picture may be ob-
scured. This is due to scaling of the picture
by the set, it is not a malfunction.
• When PC input mode is selected, some of
the television’s features will be unavailable
e.g. Manual Settings in the SETUP menu,
Colour, Tint, Sharpness and Black/White
Level in the PICTURE menu.
• If connecting a certain PC model with a
unique PC signal, the PC signal may not be
detected correctly.
To connect a PC to the
HDMI terminal
When connecting a PC to the HDMI terminal
on the television, use an HDMI-to-DVI adapter
cable and an analogue audio cable.
If connecting a PC with an HDMI terminal, use
an HDMI cable (type A connector). A separate
analogue cable is not necessary (see page 9).
For instruction
purposes only
the back of your televisionComputer
Audio cable for PC to
television connection
(not supplied)
Conversion
adaptor if required
(not supplied)
Mini D-sub
15 pin connector
RGB PC cable
(not supplied)
For acceptable PC and video signal formats,
see page 10.
Note:
• The edges of the images may be hidden.
• If connecting a certain PC model with a
unique PC signal, the PC signal may not be
detected correctly.
12
English
Using the Controls
While all the necessary adjustments and controls for the television are made using the remote control,
the buttons on the television may be used for some functions.
For 19/22AV70**
For 26/32AV70**
Note: 19/22/26/32AV70** series does not have HDMI 3 Input.
13
English
Switching On
If the RED LED is unlit check that the plug is
connected to the power supply. If the picture
does not appear press on the remote con-
trol, it may take a few moments.
To put the television into Standby press on
the remote control. To view the television press
again. The picture may take a few seconds
to appear.
Using the Remote Control
To set up the television you will now need to
use the on screen menus. Press MENU on the
remote control to see the menus.
The on-screen menu appears as a list of ve
topics. As each symbol is selected by pressing
◄ or ► on the navigation ring on the remote
control, its respective options will appear
below.
To use the options, press ▲ or ▼ on the navi-
gation ring to move up and down through them
and use OK, ◄ or ► to select the required
choice. Follow the on-screen instructions. The
functions of each menu are described in detail
throughout the manual.
For 32/40LV70**
Using the Controls
To change the volume press - .
To change the channel press P .
Press MENU and ▲ or ▼, ◄ or ► to control
the sound and picture options.
Press EXIT to nish.
To select an external input, press and then
use ▲ or ▼ to move through the list until
the appropriate input source is selected.
Please always refer to the owner’s manual of
the equipment to be connected for full details.
Please note: Inserting the headphone plug will
mute the sound from all speakers.
14
English
Before switching on the television put your decoder and media recorder to Standby if they are connected.
To set up the television use the buttons on the remote control as detailed on page 6.
Startup Application
Quick Setup
For 1st use, plug in the television and
press the button. The Quick Setup
screen will appear.
Press ◄ or ► select your language, and
then press OK, the Location screen will
appear.
Press ◄ or ► select Home or Store.
For normal home use, select Home.
4
Press ◄ or ► to select your country and
press OK.
To start Auto tuning press OK.
The search will begin for all available stations.
The slide bar will move along the line as the
search progresses.
You must allow the television to complete
the search.
When the search is complete the television will
automatically select programme position 1. This
may not be a clear picture or the signal may be
weak, so the station order can be changed us-
ing Manual tuning in SET UP menu. See page
Auto Tuning
Note:
As new services are broadcast, it will be
necessary to re-tune the television in order to
view them.
Auto Tuning will completely re-tune the televi-
sion and can be used to up date the channel
list. It is recommended that Auto Tuning
is run periodically to ensure that all new
services are added. All current channels and
settings, e.g. locked channels, will be lost.
From the SET UP menu, press p or q to
select Auto tuning.
SET UP
Language
Country
Auto tuning
Manual tuning
AV connection
Quick Setup
Picture position
Automatic Power Down
Location
Reset TV
English
UK
OK
OK
OK
OK
On
Home
OK
Watch TV
Enter
OK
EXIT
Press to display the Auto tuning menu.
Auto tuning
Previoous settings will be lost!
Press EXIT for no change.
Press OK key to start Auto tune.
!
Press to start the automatic search.
The search will begin for all available
stations.
4
When the automatic search is completed,
the TV will automatically appear the SET
UP menu.
Closing the Auto tuning menu, press EXIT.
Note:
When you preset the channel which sound
of broadcast transmission system adopts “M”
system, the sound system may not be tuned
correctly if the radio waves transmit badly. At
that time, preset the channel by Manual tuning.
15
English
Manual Tuning
From the SET UP menu, press p or q to
select Manual tuning.
Press to display the Manual tuning
menu. Press u than press p or q to
select the programme position you want to
arrange and press ◄ again.
Press p or q to move through the list to
your preferred position. As you do so the
other stations will move to make room.
Press t to store programme position.
4
Press to display the breakdown menu.
Press t or u to select an item, then press
p or q to select the item as shown below.
Programme
Manual tunning
1 B / G A C69 0
A B C D E F G H
A
Programme:
The number to be pressed on the remote
control.
B
System:
Specic to certain areas.
C
Colour system:
Factory set to Auto, should only be
changed if problems are experienced, i.e.
NTSC input from external source.
D
Programme skip:
Means nothing has been stored or the
facility to skip the channel is ON.
E
Channel:
The channel number on which a station is
being broadcast.
F
Search:
Search up and down for a signal.
G
Manual ne tuning:
Turn on to execute ne tune function. Turn
off to execute manual ne tune funftion.
H
Station:
Station identication. Use the p or q
and ◄ or ► buttons to enter up to seven
characters.
Use p or q to highlight the desired position.
We suggest Pos. 0 for a media recorder.
Programme
Manual tunning
1 B / G A C69 0
Note:
Different Channel numbers may be
displayed.
Press to select. If the channel chosen
for the media recorder is set to skip, Skip
should be removed before storing.
Press ► to select System and use p or q to
change if required.
System
Manual tunning
B / G A C69 01
Then press ► to select Search.
Press p or q to begin the search. The search
symbol will ash.
Search
Manual tunning
B / G A C69 01
Each signal will be shown on the television, if
it is not your media recorder, press p or q
again to restart the search.
When your media recorder signal is found,
press ► to move along to Station. With p,
q, ◄ and ► put in the required characters,
e.g. VCR.
Station
Manual tunning
B / G A V C RC69 01
Press to save.
Repeat for each position you want to tune or,
press MENU to return to the list of channels
and select the next number to tune.
Press EXIT when you have nished.
16
English
From the SET UP menu, press p or q
to select Manual tuning menu, and then
press .
Press to display the Manual tuning
menu. Press u than press p or q to
select the programme position you want to
arrange.
Press q to select the new position “2”,
then press t.
4
Press p to select the channel MNOP, then
press u.
Press p to select the new position “1”
then press t.
Conrm new Manual tuning menu.
Watching TV Programmes
Selecting the menu language
Choose from 22 different languages (English,
French, German, Spanish, Italian, Dutch,
Portuguese, Swedish, Danish, Norwegian,
Finnish, Polish, Turkish, Hungarian, Slovak,
Czech, Russian, Romanian, Bulgarian, Serbian,
Greek, Croatian) for the On-Screen Display.
Press MENU, then press t or u to display
the SET UP menu.
SET UP
Language
Country
AV connection
PC Setting
Auto Adjust
Automatic Power Down
Location
English
UK
OK
OK
On
Home
Edit
RETURN
Back
Press p or q to select Language.
Press t or u to select the desired language.
Skip
To prevent certain channels from being viewed,
positions can be skipped.
From the SET UP menu, press p or q to
select Manual tuning.
Use p or q to highlight the position to be
skipped and press to select.
Press ► to select Programme skip and use
p or q to turn Skip on, and then press .
Programme skip
Manual tunning
B / G A C69 01
4
Press RETURN and repeat from Step 2 or
press EXIT.
Each position has to be individually selected.
To turn Skip off, repeat the procedure for each
position.
Skipped positions cannot be selected by P
and P . or by the controls on the televi-
sion, but can still be accessed by the number
buttons on the remote control.
Sorting positions
The TV is capable of receiving a number of dif-
ferent channels depending upon where you live.
Sorting programme position is an easy way of
storing each channel on the programme posi-
tion of your choice.
Ex.: To swap channel ABCD (Prog. 1) for chan-
nel MNOP (Prog. 2).
•
•
From the SET UP menu, press p or q
to select Manual tuning menu, and then
press .
17
English
Changing the Position
Enter the desired position number using
the Number buttons on the remote control.
For positions below 10, use 0 and the
requires number e.g., for position 1.
3
You can also change the position by using
P or P .
The position will be displayed on the screen
with the Mono/Stereo/Dual audio status.
Note:
Changing positions between different format
channels will takes several seconds.
Displaying the On-screen
Information
Press to display the following on-
screen information.
3
The information will disappear in about 5
seconds.
Position or external input mode
selected
Position skip on/off information
Label (if set)
Mono/Stereo/Dual audio status
•
•
•
•
To erase the display instantly, press EXIT.
18
English
General Controls
The General Controls will allow you to select channels and information, use the sound controls, per-
sonalise the picture style, and select external equipment.
Selecting Channels
To select a channel use the numbered buttons
on the remote control.
Channels can also be selected using P and
P .
To display on-screen information such as posi-
tion, input mode or stereo/mono signal, press
. Press again to cancel.
The Time Display – analogue only
The time display facility allows the current
(text service) time to be seen on the television
screen.
Press whilst watching a normal televi-
sion broadcast to see the time display from the
broadcaster. It will remain on screen for about
15 seconds.
Note:
This display may not be available in some
cases.
Stereo and Bilingual
Transmissions
If stereo or dual language broadcasts are trans-
mitted the word Stereo or Dual will appear on
the screen each time channels are changed, dis-
appearing after a few seconds. If the broadcast
is not in stereo the word Mono will appear.
Stereo: Press to select Stereo or Mono.
Bilingual: If a bilingual programme is offered,
the word Dual will display on screen. To change
between languages, press to switch be-
tween Dual 1, Dual 2 or Mono.
Subtitles
If Subtitles are available for your current pro-
gramme, pressing the SUBTITLE button will
toggle Subtitles on or off.
Using the Quick Access
(Except PC)
The quick access menu helps you access some
options quickly such as Picture Mode, Picture
Size, and Sleep Timer. Press the QUICK button
to display the Quick access menu and use
▲ or ▼ to select the option you would like to
change.
Source Quick access item Description
Except PC
Picture Mode See age 22
Picture Size See age 20
Sleep Timer See age 27
Source Quick access item Description
Except PC
Picture Size See age 20
Sleep Timer See age 27
Using the Quick Access (PC Only)
Quick access helps you access some options
quickly, such as Picture Size and Sleep Timer.
Press QUICK to display the Quick access and
use ▲ or ▼ to select the option.
Quick access
19
English
Sound Controls
Volume controls and mute sound
Volume
Press or to adjust the volume.
Sound Mute
Press once to turn the sound off and again
to cancel.
Dual
If a programme or lm is being broadcast with
a soundtrack in more than one language, the
DUAL feature allows selection between them.
Press MENU and ◄ or ► to select SOUND.
SOUND
Dual 1
0
0
0
Off
Off
Off
Dual
Bass
Treble
Balance
Stable sound
Surround
Bass boost
RETURN
Back
OK
Enter
Use q to highlight Dual, and then press ◄
or ► to choose between Dual 1 or Dual 2.
SOUND
Dual 1
0
0
0
Off
Off
Off
Dual
Bass
Treble
Balance
Stable sound
Surround
Bass boost
RETURN
Back
OK
Enter
Bass, Treble and Balance
The sound controls are accessible in digital
and analogue modes.
Press MENU and ◄ or ► to select SOUND.
Press q to highlight Bass, Treble or
Balance and ◄ or ► to change the setting.
Stable Sound
®
The Stable Sound feature limits high volume
levels in order to prevent the extreme changes
in volume that can occur when channels are
changed or a programme switches to a
commercial.
Press MENU and ◄ or ► to select SOUND.
Press q to highlight Stable Sound and ◄
or ► to select On or Off.
Surround
Bass boost enhances depth of the sound.
Press MENU and ◄ or ► to select SOUND.
Press q to highlight Bass boost and ◄ or
► to select On or Off.
Bass Boost
Surround enhances depth of the sound.
Press MENU and ◄ or ► to select SOUND.
Press q to highlight Surround and ◄ or
► to select On or Off.
20
English
Subtitle
Widescreen viewing
Depending on the type of broadcast being transmitted, programmes can be viewed in a
number of formats.
Native
When using a PC connected via HDMI this
setting will show the picture without over
scan, i.e. WYSIWYG.
This option is only available when
watching video signal source via HDMI.
Wide
Use this setting when watching a
widescreen DVD, widescreen video tape
or a 16:9 broadcast (when available). Due
to the range of widescreen formats (16:9,
14:9, 20:9 etc.) black bars may be visible
on the top and bottom of the screen.
4:3
Use this setting to view a true 4:3
broadcast.
Super Live
This setting will enlarge a 4:3 image to
t the screen by stretching the image
horizontally and vertically, holding better
proportions at the centre of the image.
Some distortion may occur.
Cinema
When watching letterbox format lms/
video tapes, this setting will eliminate or
reduce the black bars at the top and bottom
of the screen by zooming in and selecting
the image without distortion.
Subtitle
When subtitles are included on a letterbox
format broadcast, this setting will raise
the picture to ensure that all the text is
displayed.
14:9
Use this setting when watching a 14:9
broadcast.
Press QUICK to display the QUICK access
menu. Use ▲ or ▼ to highlight the Picture Size,
and press ◄ or ► to select the option.
dradnatSedoM erutciP
Wide
Picture Size
Sleep Timer
Off
Quick access
You can choose the picture size from Native, Wide, 4:3, Super Live, Cinema, Subtitle or 14:9.
Using the special functions to change the size of the displayed image (i.e. changing the
height/width ratio) for the purposes of public display or commercial gain may infringe on
copyright laws.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
Toshiba 19AV703 Owner's manual
- Category
- LCD TVs
- Type
- Owner's manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Toshiba 46WM48 Owner's manual
-
-
Toshiba 32AV800 User manual
-
-
-
-
-
-
-