Connector 1
Mini DisplayPort Male
Connector 2
DVI-D Single Link Female
Compatibility
Club 3D graphic cards with Mini
DisplayPort output or any Mini
DisplayPort compatible device.
Disclaimer
While we endeavor to provide the most accurate, up-to-date information available, the content on this document
may be out of date or include omissions, inaccuracies or other errors. Therefore Club 3D does not accept any rights
claimed on the content of this document. Please refer to a full overview of our Legacy Terms and Conditions on www.
club-3d.com. All other brand names are trademarks or registered trademarks and are the property of their respective
owners. All content is subject to change without prior notice.
Copyright © 2010, Club 3D B.V. Rev. 1.2 2 December 2010
Item code: CAC-1100
EAN code: 8717249408482
Mini DisplayPort to DVI-D Single-Link cable
Club 3D UltraAV Mini DisplayPort to DVI-D (Digital) cable enables the
connection of your Mini DisplayPort supported computer to a DVI-D
supported television, monitor or projector. Simply connect the Mini
DisplayPort (male) end of the connector to your computer and plug your
existing DVI-D cable from the display into the DVI (female) adapter. Setup
is complete, no software installation required. The circuitry built into the
adapter seamlessly converts the Mini DisplayPort’s video signal into a DVI
digital video signal, requiring no external power.
www.club-3d.com
DVI-D Single-Link
ACCESSORIES
Mini DisplayPort
Connections
Single Link
DVI-I
Dual Link
DVI-I
Single Link
DVI-D
Dual Link
DVI-D
DVI-A
Mini DisplayPort