Optoma EH415e-M User manual

DLP Projector

User manual

English

1

Table of contents

Table of contents ....................................................................................1

Usage Notice ..........................................................................................3

Safety Information .........................................................................................3

Precautions....................................................................................................4

Eye Safety Warnings .....................................................................................6

Introduction.............................................................................................7

Package Overview.........................................................................................7

Product Overview ..........................................................................................8

Main Unit ................................................................................................................ 8

Connection Ports ................................................................................................... 9

Remote Control .................................................................................................... 10

Installation ............................................................................................11

Connecting the Projector .............................................................................11

Connect to Notebook ........................................................................................... 11

Connect to Video Sources ................................................................................... 12

Powering On/O the Projector .....................................................................13

Powering On the Projector ................................................................................... 13

Powering O the Projector ................................................................................... 14

Warning Indicator ................................................................................................. 14

Adjusting the Projected Image.....................................................................15

Adjusting the Projector’s Height ........................................................................... 15

Adjusting the vertical image position .................................................................... 15

Adjusting Projection Image Size (WXGA) ............................................................ 16

Adjusting Projection Image Size (1080p) ............................................................. 17

Adjusting Projection Image Size (1080p short throw) .......................................... 18

User Controls .......................................................................................19

Remote Control ...........................................................................................19

On-screen Display Menus ...........................................................................21

How to operate ..................................................................................................... 21

Menu Tree ...................................................................................................22

Image ................................................................................................................... 24

Image | Advanced ................................................................................................ 26

Image | Advanced | Color Matching ..................................................................... 28

Image | Advanced | Signal ................................................................................... 29

Display ................................................................................................................. 30

Display | 3D .......................................................................................................... 32

Setup .................................................................................................................... 33

Setup | Language ................................................................................................. 35

Setup | Security .................................................................................................... 36

Setup | Audio Settings ......................................................................................... 39

Setup | Advanced ................................................................................................. 40

Setup | Network ................................................................................................... 41

2

Table of contents

Setup | LAN Settings ............................................................................................ 42

Setup | Control Settings ....................................................................................... 43

Options ................................................................................................................. 44

Options | Input Source ......................................................................................... 47

Options | Remote Settings ................................................................................... 48

Options | Advanced .............................................................................................. 49

Options | Lamp Setting ........................................................................................ 51

LAN_RJ45 ...................................................................................................53

Appendices...........................................................................................63

Troubleshooting ........................................................................................... 63

Image ................................................................................................................... 63

Other .................................................................................................................... 64

Projector LED Status Indicator ............................................................................. 65

Remote Control .................................................................................................... 66

Replacing the Lamp.....................................................................................67

Compatibility Modes ....................................................................................70

Video Compatibility .............................................................................................. 70

Video Timing Detail Describe ............................................................................... 70

Computer Compatibility - VESA standards .......................................................... 71

Input Signal for HDMI/DVI-D ............................................................................... 72

True 3D Video Compatibility table ....................................................................... 73

RS232 Commands and Protocol Function List............................................74

RS232 Pin Assignments (projector side) ............................................................. 74

RS232 Protocol Function List .............................................................................. 75

Telnet Commands .......................................................................................79

AMX Device Discovery commands .............................................................79

PJLink™ supported commands...................................................................80

Trademarks .................................................................................................82

Ceiling Mount Installation ............................................................................84

Optoma Global Oces ................................................................................85

Regulation & Safety Notices ........................................................................ 87

Ver.:1

English

3

Usage Notice

Safety Information

The lightning ash with arrow head within an equilateral triangle is

intended to alert the user to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may be of sucient

magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH

VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE

CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

Class B emissions limits

This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

Important Safety Instruction

1. Do not block any ventilation openings. To ensure reliable operation of

the projector and to protect from over heating, it is recommended to

install the projector in a location that does not block ventilation. As an

example, do not place the projector on a crowded coee table, sofa,

bed, etc. Do not put the projector in an enclosure such as a book case

or a cabinet that restricts air ow.

2. Do not use the projector near water or moisture. To reduce the risk of

re and/or electric shock, do not expose the projector to rain or

moisture.

3. Do not install near heat sources such as radiators, heaters, stoves or

any other apparatus such as ampliers that emits heat.

4. Clean only with dry cloth.

5. Only use attachments/accessories specied by the manufacturer.

6. Do not use the unit if it has been physically damaged or abused.

Physical damage/abuse would be (but not limited to):

▀■ Unit has been dropped.

▀■ Power supply cord or plug has been damaged.

▀■ Liquid has been spilled on to the projector.

▀■ Projector has been exposed to rain or moisture.

▀■ Something has fallen in the projector or something is loose inside.

Do not attempt to service the unit yourself. Opening or removing covers

may expose you to dangerous voltages or other hazards. Please call

Optoma before you send the unit for repair.

7. Do not let objects or liquids enter the projector. They may touch danger-

ous voltage points and short out parts that could result in re or electric

shock.

8. See projector enclosure for safety related markings.

9. The unit should only be repaired by appropriate service personnel.

4

Usage Notice

Precautions

Please follow all warnings, precautions and

maintenance as recommended in this user’s

guide.

▀■ Warning-

Do not look into the projector's lens when the

lamp is on. The bright light may hurt your eyes.

▀■ Warning-

To reduce the risk of re or electric shock, do

not expose this projector to rain or moisture.

▀■ Warning-

Please do not open or disassemble the

projector as this may cause electric shock.

▀■ Warning-

When replacing the lamp, please allow the unit

to cool down. Follow instructions as described

on page 67.

▀■ Warning-

This projector will detect the life of the lamp

itself. Please be sure to change the lamp when it

shows warning messages.

▀■ Warning-

Reset the "Lamp Reset" function from the

on-screen display "System|Lamp Setting" menu

after replacing the lamp module

(refer to pages 51-52).

▀■ Warning-

When switching the projector o, please ensure

the cooling cycle has been completed before

disconnecting power. Allow 90 seconds for the

projector to cool down.

▀■ Warning-

Do not use lens cap when projector is in opera-

tion.

▀■ Warning-

When the lamp is approaching to the end of its

life time, the message "Replacement suggested"

will show on the screen.

Please contact your local reseller or service cen-

ter to change the lamp as soon as possible.

Note

When the lamp reaches

the end of its life, the

projector will not turn

back on until the lamp

module has been

replaced. To replace

the lamp, follow the

procedures listed under

"Replacing the Lamp"

section on page 67.

English

5

Usage Notice

Do:

▀■ Turn o and unplug the power plug from the AC outlet before

cleaning the product.

▀■ Use a soft dry cloth with mild detergent to clean the display

housing.

▀■ Disconnect the power plug from AC outlet if the product is not

being used for a long period of time.

Do not:

▀■ Block the slots and openings on the unit provided for

ventilation.

▀■ Use abrasive cleaners, waxes or solvents to clean the unit.

▀■ Use under the following conditions:

- In extremely hot, cold or humid environments.



Ensure that the ambient room temperature is

within 5 - 40°C



Relative Humidity is 10 - 85% (Max.), non-condensing

- In areas susceptible to excessive dust and dirt.

- Near any appliance generating a strong magnetic eld.

- In direct sunlight.

6

Usage Notice

Eye Safety Warnings

▀■ Avoid staring/facing directly into the projector beam at all

times. Keep your back to the beam as much as possible.

▀■ When projector is used in a classroom, adequately supervise

students when they are asked to point out something on the

screen.

▀■ In order to minimize the lamp power, use room blinds to

reduce ambient light levels.

Note

Keep this manual for

future reference..

English

7

Introduction

Package Overview

Unpack and inspect the box contents to ensure all parts

listed below are in the box. If something is missing,

please contact Optoma customer service.

Projector with lens cap Power Cord 1.8m 15 pin D-sub VGA Cable

Remote Control 2 x AAA Batteries Carrying Case

Documentation :



User's Manual



Warranty Card



Basic User’s Manual

Note

Due to dierent

applications in each

Country, some regions

may have dierent

accessories.

8

Introduction

Product Overview

Main Unit

11

10

9

8

7

6

5

4

3

2

1

1. IR Receiver

2. Tilt-Adjustment Feet

3. Lens Cap

4. Function Keys

5. LED Indicators

6. Power Button

7. LENS SHIFT(Not available in 1080p short throw)

8. Zoom(Not available in 1080p short throw)

9. Focus

10. Lens

11. Connection Ports

English

9

Introduction

Connection Ports

15

14

13

12

11

10

98765

4

321

1. Power Socket

2. USB Power Out(5V_1.5A)

3. VGA-IN/YPbPr/

4. SERVICE

5. VGA-OUT

6. RS-232C

7. HDMI2

8. HDMI1

9. RJ-45

10. Kensington Microsaver

TM

Lock Port

11. VIDEO

12. AUDIO2-IN (L and R)

13. AUDIO1 IN

14. AUDIO OUT

15. 12V OUT

10

Introduction

Note

Due to generic remote,

function is model

dependent.

CAUTION

Use of controls,

adjustments or

performance of

procedures other

than those specied

herein may result in

hazardous laser light

exposure.

Complies with

FDA performance

standards for laser

products except for

deviations pursuant to

Laser Notice No. 50,

dated June 24, 2007.

Remote Control

1. Power On/O

2.

3. Freeze

4. USB mouse Left click

5. Four Directional Select

Keys

6. Enter

7. Laser (DO NOT POINT IN

EYES)

8. Page-

9. V Keystone +/-

10.

/1(Number Button for

password input)

11. HDMI/4

12. User1/7

13. Source

14. Menu/2

15. VGA/5

16. Switch

17.

18. USB mouse Right click

19. Page+

20. Volume +/-

21. 3D/3

22. Video/6

23. User3/9

24. Resync

25. User2/8

26.

/0

1

22

23

24

2

4

5

6

7

3

8

9

10

11

12

13

14

16

17

18

19

20

21

25

15

26

English

11

Connecting the Projector

Connect to Notebook

Installation

1............................................................................................VGA Input Cable

2..........................................................DVI/HDMI Cable (Optional Accessory)

3.................................................................HDMI Cable (Optional Accessory)

4....................................................................................................Power Cord

5.................................................................Audio Cable (Optional Accessory)

6...............................................................RS232 Cable (Optional Accessory)

Note

Due to the dierence

in applications for each

country, some regions

may have dierent

accessories.

E62405SP

R

VGA, DVI, HDMI

4

5

32

1

6

12

Inst allatio n

Connect to Video Sources

1....................................SCART RGB/S-Video Adapter (Optional Accessory)

2.................................................................HDMI Cable (Optional Accessory)

3....................................................................................................Power Cord

4.............................................. Composite Video Cable (Optional Accessory)

Note

12V OUT is a

programmable trigger.

Note

Due to the dierence

in applications for each

country, some regions

may have dierent

accessories.

Video Output

DVD player, Set-top Box

HDTV receiver

DVD player, Set-top Box

HDTV receiver

E62405SP

R

1

4

3

2

English

13

Inst allatio n

Powering On/O the Projector

Powering On the Projector

1. Remove the lens cover.

2. Connect the power cord to the projector.

3. Turn On the connected devices.

4. Ensure the Power LED is ashing and then press the power

button to turn On the projector.

The projector’s startup logo screen displays and connected

devices are detected. If the connected device is a laptop, press

the appropriate keys on the computer keyboard to switch the

display output to the projector. (Check the user manual of the

laptop to determine the appropriate Fn key combination to change

display output.)

See Security Settings on page 36 if security lock is enabled.

5. If more than one input device is connected, press the “Source”

button sequentially to switch between devices.

For direct source selection, see page 20.

Note

Turn on the projector

rst and then select the

signal sources.

Note

Due to the dierence

in applications for each

country, some regions

may have dierent

accessories.

Note

12V OUT is a

programmable trigger.

14

Inst allatio n

Warning Indicator

▀■ When the Lamp LED indicator lights red, the projector will

automatically shut itself down. Please contact your local

reseller or service center. See page 65.

▀■ When the Temp LED is on a steady (not ashing) red, the

projector will automatically shut itself down. Under normal

conditions, the projector can be switched on again after it

has cooled down. If the problem persists, you should contact

your local dealer or our service center. See page 65.

Powering O the Projector

1. Press the " " button on the remote control or "POWER" button

on the panel of the projector to turn o the projector. First push of

button will display the following message on the screen.

Press the button again to conrm the shut down. If the button is not

pressed, the message will disappear in 5 seconds.

2. The Power LED ashes green (1 sec on, 1sec o) and the fans will

speed up during shut down cooling cycle. The projector reaches

stand-by mode as soon as the Power LED ashes green (2 sec on,

2 sec o).

If you wish to turn the projector back on, you must wait until the

projector has completed the cooling cycle and has entered standby

mode. Once in standby mode, simply press "POWER" button on

the rear of the projector or " " on the remote control to restart the

projector.

3. Disconnect the power cord from the electrical outlet and the

projector only when the projector is in stand-by mode.

Note

Contact the nearest

service center if the

projector displays

these symptoms. See

page 85 for more

information.

English

15

Inst allatio n

Adjusting the Projected Image

Adjusting the Projector’s Height

The projector is equipped with tilt-adjuster feet for

adjusting the image height.

To adjust the angle of the picture, turn the tilt-adjuster right

or left until the desired angle has been achieved.

Adjusting the vertical image position

The Lens Shift function can be used to adjust the

position of the vertically.

Lens shift adjustment for WXGA

The display position

can be shifted upward

up to 7% and down to

4.5% elevation of the

display.

Lens shift adjustment for 1080P

The display position

can be shifted upward

up to 9% and down to

5% elevation of the

display.

Note

Lens Shift is not

available in 1080p short

throw.

Note

• The projector

table or stand

should be level

and sturdy.

• Position the

projector so that

it is perpendicular

to the screen.

• For personal

safety, please

secure the cables

properly.

Lens shift adjustable range

7%

Shift to top

7%V

1V

4.5%V

4.5%

Shift range

Lens shift center position

Shift range

Lens shift adjustable range

9%

Shift to top

9%V

1V

5%V

5%

Shift range

Lens shift center position

Shift range

16

Inst allatio n

Diagonal

length (inch) size

of 16:10 Screen

Screen Size W X H (16:10) Projection distance (D)

Oset (A)

(m) (feet) (m) (feet)

Width Height Width Height wide tele wide tele (m) (feet)

30 0.65 0.40 2.12 1.32 0.94 1.42 3.10 4.66 0.05 0.15

40 0.86 0.54 2.83 1.77 1.26 1.90 4.13 6.22 0.06 0.20

60 1.29 0.81 4.24 2.65 1.89 2.84 6.19 9.33 0.09 0.30

80 1.72 1.08 5.65 3.53 2.52 3.79 8.25 12.44 0.12 0.41

100 2.15 1.35 7.07 4.42 3.14 4.74 10.32 15.55 0.15 0.51

120 2.58 1.62 8.48 5.30 3.77 5.69 12.38 18.66 0.19 0.61

140 3.02 1.88 9.89 6.18 4.40 6.63 14.44 21.77 0.22 0.71

160 3.45 2.15 11.31 7.07 5.03 7.58 16.51 24.87 0.25 0.81

190 4.09 2.56 13.43 8.39 5.97 9.00 19.60 29.54 0.29 0.97

230 4.95 3.10 16.25 10.16 7.23 10.90 23.73 35.76 0.36 1.17

280 6.03 3.77 19.79 12.37 8.81 13.27 28.89 43.53 0.43 1.42

300 6.46 4.04 21.20 13.25 9.43 14.22 30.95 46.64 0.46 1.52

Adjusting Projection Image Size (WXGA)

Note

300" (overdrive) for

Asia.

Projection Distance

Keystone Correction Angle

Image Height

English

17

Inst allatio n

Diagonal

length (inch) size

of 16:9 Screen

Screen Size W X H (16:9) Projection distance (D)

Oset (A)

(m) (feet) (m) (feet)

Width Height Width Height wide tele wide tele (m) (feet)

30 0.66 0.37 2.18 1.23 0.92 1.39 3.03 4.55 0.06 0.18

40 0.89 0.50 2.91 1.63 1.23 1.85 4.04 6.07 0.07 0.25

60 1.33 0.75 4.36 2.45 1.85 2.78 6.06 9.11 0.11 0.37

80 1.77 1.00 5.81 3.27 2.46 3.70 8.08 12.14 0.15 0.49

100 2.21 1.25 7.26 4.09 3.08 4.63 10.10 15.18 0.19 0.61

120 2.66 1.49 8.72 4.90 3.69 5.55 12.11 18.22 0.22 0.74

140 3.10 1.74 10.17 5.72 4.31 6.48 14.13 21.25 0.26 0.86

160 3.54 1.99 11.62 6.54 4.92 7.40 16.15 24.29 0.30 0.98

190 4.21 2.37 13.80 7.76 5.85 8.79 19.18 28.84 0.35 1.16

230 5.09 2.86 16.71 9.40 7.08 10.64 23.22 34.91 0.43 1.41

280 6.20 3.49 20.34 11.44 8.62 12.96 28.27 42.50 0.52 1.72

300 6.64 3.74 21.79 12.26 9.23 13.88 30.29 45.54 0.56 1.84

Adjusting Projection Image Size (1080p)

Projection Distance

Keystone Correction Angle

Image Height

18

Inst allatio n

Diagonal

length (inch) size

of 16:9 Screen

Screen Size W X H (16:9) Projection distance (D)

Oset (A)

(m) (feet) (m) (feet)

Width Height Width Height wide wide (m) (feet)

60 1.33 0.75 4.36 2.45 0.66 2.18 0.11 0.37

80 1.77 1.00 5.81 3.27 0.89 2.91 0.15 0.49

100 2.21 1.25 7.26 4.09 1.11 3.63 0.19 0.61

120 2.66 1.49 8.72 4.90 1.33 4.36 0.22 0.74

140 3.10 1.74 10.17 5.72 1.55 5.08 0.26 0.86

153 3.39 1.91 11.11 6.25 1.69 5.56 0.29 0.94

Adjusting Projection Image Size

(1080p short throw)

Projection Distance

Keystone Correction Angle

Image Height

English

19

User Controls

Note

Due to the dierence

in applications for each

country, some regions

may have dierent

accessories.

Using the Remote Control

Power On/O

Refer to the “Powering O the Projector” on page 14.

Refer to the “Powering On the Projector” on page 13.

/Switch

When connecting your PC to the projector through

USB, press “Mouse Switch” to activate/ inactivate the

mouse mode and control your PC using the remote.

Display blank & Audio mute

Freeze Freeze

Mute

L USB mouse Left click

R USB mouse Right click

Four

Directional

Select Keys

1. Use ▲▼◄► to select items or make adjustments

to your selection.

2. In the mouse mode, use ▲▼◄► as emulation of

directional keys.

Enter

1. Conrm your item selection.

2. In the mouse mode, as emulation keyboard enter

key.

Page-

Page Down key for emulation of USB keyboard via

USB when OSD o

Laser

Press Laser to operate the on-screen pointer.

DO NOT POINT IN EYES.

Page+

Page Up key for emulation of USB keyboard via USB

when OSD o

V Keystone +/-

Adjusts image distortion caused by tilting the projector.

(±40 degrees)

Volume +/- Press “Volume +/-” to adjust volume.

Note

Due to generic remote,

function is model

dependent.

Remote Control

Page is loading ...

Optoma EH415e-M User manual

This manual is also suitable for

Optoma EH415e-M User manual

Related papers

Other documents