VIAIR CompRessoR
mountIng BRACket
VIAIR Corporation introduces their new, heavy duty steel mounting bracket weighing in
4.6 lbs. These brackets are specically designed to be vertically mounted to your vehicle’s
chassis using four points stamped into the vertical surface of the bracket. They can either
be bolted in, or rosette welded for more permanent installations. The brackets start out as
a at piece of heavy, 11-gauge steel which is stamped into shape and bent at 90 degrees
before the gussets are welded solid for superior strength. Each mounting bracket is then
powder coated black for long-lasting good looks that will last for years. - Designed for
use with all VIAIR compressors from 280 Series through the new 490 Series units.
5” (127mm)
5” (127mm)
13” (330mm)
5” (127mm)
5” (127mm)
13” (330mm)
To Frame Rail To Frame Rail
-
1
