Topeak TNJ-P Owner's manual

Brand: Topeak

Model: TNJ-P

Type: Owner's manual

Recommended NINJA P

installation position

If NINJA P is inserted

completely, use 5 mm

Allen key to remove.

User's Guide

NINJA P GB

STORE NINJA P IN SEATPOST

REMOVE NINJA P FROM SEATPOST

HOW TO CHANGE RUBBER RING

Presta Valve Inﬂation Head

Put the pump into seatpost and turn Locking

Grip counter-clockwise to seal the Rubber

Ring. (DO NOT insert pump completely into

seatpost.)

Turn Locking Grip clockwise to loosen the

Rubber Ring and remove the pump.

Rubber Ring x 2

(for ø 30.9 / 31.6 mm seatpost)

Dust Cover

2-year Warranty: All mechanical components

against manufacturer defects only.

Warranty Claim Requirements

To obtain warranty service, you must have your

original sales receipt. Items returned without a

sales receipt will assume that the warranty begins

on the date of manufacture. All warranties will be

void if the product is damaged due to user crash,

abuse, system alteration, modiﬁcation, or used in

any way not intended as described in this manual.

* The speciﬁcations and design are subject to

change without notice.

Please contact your Topeak dealer with any

questions. For USA customer service,

call: 1-800-250-3068

www.topeak.com

WARRANTY

Fits ø 27.2, 30.9 & 31.6 mm ROUND SEATPOST only. Please read the User’s Guide before ﬁrst use.

Rubber Ring (for ø 27.2 mm seatpost)

Locking Grip

Seatpost Position Indicator

(for ø 27.2 mm seatpost)

Included position

indicators keep

track of your

seat height

Seatpost Position Indicator

(for ø 30.9 / 31.6 mm seatpost)

Make sure Ninja P is installed in

seatpost properly during a period

of time.

WARNING

Avoid pinching

ﬁngers while

pumping

CLOSE OPEN

FRONT

REAR

Rubber Ring x 2

(for ø 27.2 mm seatpost)

Rubber Ring x 2

(for ø 30.9 / 31.6 mm

seatpost)

Turn Locking Grip to expand rubber ring

for initial ﬁt.

IMPORTANT NOTE

Topeak TNJ-P Owner's manual

Topeak TNJ-P Owner's manual

Topeak TNJ-P Owner's manual

Related papers

Other documents