2. Heimgard
  3. Din Rail Bracket

Heimgard Din Rail Bracket User guide

  • I have reviewed the Quick start guide for the Din rail bracket, which details its installation process on a 35mm DIN rail and the requirement for a Heimgard actuator. I'm ready to answer your questions regarding the mentioned steps of clip installation, sliding function, and its compatibility.
  • What is this DIN rail mounting clip designed for?
    What size of DIN rail is this clip compatible with?
    What else is required to use this clip?
Quick start guide
version 1.0
Requires a
Heimgard
actuator
Din rail
bracket
Installation
1. Clip the mounting clip onto DIN rail.
Read all instructions prior to installation.
2.
3.
Install the device onto the mounting clip in
the correct direction.
The device can slide freely on the DIN rail.
This DIN rail mounting clip is developed to mount in-wall
module on a 35mm DIN rail. It is applicable to all devices with
the casing design as follows:
/