EC-HDD2 3 - Connect USB Cable to EC-HDD2
4 - Attach the other end to your laptop or desktop PC
5 - Power On
EC-HDD2 EC-HDD2 EC-HDD2 EC-HDD2 EC-HDD2 EC-HDD2
USB 3.0 SATA 2.5” & 3.5” DUAL BAY
HARD DRIVE DOCKING STATION
12345
USB 3.0 DUAL BAY HDD DOCKING STATION
The Sabrent Dual Bay Hard Drive Dock enables you to access and
transfer data between your computer and two hard drives
simultaneously, or between the two hard drives themselves.
Moreover, you can also use the Sabrent Dock to clone hard drives
offline at maximum speed. Plug and play support for both 2.5” and
3.5” SATA, SATA II, SATA III and SSD HDDs (up to 3TB per bay).
USB 3.0 Interface supports super speed data transfer up to 5Gbps
(reverse compatible with USB 2.0). Especially ideal for system
integrators, administrators and computer technicians.
FEATURES
SPECIFICATIONS
IDENTIFICATION OF BUTTONS INSTALLATION
1 - Insert 2.5” or 3.5” Sata HDD from top
2 - Connect Power Adapter to EC-HDD2
UN-INSTALL
1 - Power Off
2 - Unplug 2.5” or 3.5” SATA HDD from top
LED
BAY 1
BAY 2
(DC IN)
USB
PORT
COPY
BUTTON
3.5” HDD 2.5” HDD
Please handle with care.
Sabrent is not responsible for any software,
hardware or data lost with the hard drive.
EC-HDD2
FOR CLONING
The size of Target Disk must be equal to or larger than the size of
Source Disk
HDD1 = Source Disk; HDD2 = Target Disk.
flashing and the cloning process will begin
www.sabrent.com
COPY BUTTON