CERBERUS PYROTRONICS Conventional Fire Alarm Systems Owner's manual

Conventional Fire Alarm

Systems & Accessories

6200

CATALOG NUMBER

l12 Zones Expandable to 32

l10 Amp Power Supply

Expandable to 20

l4 Notification Appliance

Circuits Expandable to 16

l2 Amps per Notification

Appliance Circuit

PXL Fire Alarm Control

lFeatures Easy to Use, ATM-Style

Display for Operating & Programming

l4 Zones Expandable to 8

l3 Amp Power Supply

l2 Notification Appliances Circuits

lField Programmable Software Features

for Every Application

SXL Fire Alarm Control

Fire Alarm Control Panels

All of Cerberus Pyrotronics conventional Fire Alarm Controls

are listed/approved by UL, ULC, CSFM & NYMEA. These

microprocessor based panels are listed as compatible with

all of the accessories included here. They also include

software based features to meet any need including

supervisory monitoring, waterflow alarms, event history logs

and zone bypass. They provide a complete system solution

for any zoned building.

Order Model PXL, Part No. 599-694189

Order Model SXL, Part No. 599-692530

firealarmresources.com

lAdvanced Field Cleanable Chamber Design

lUL Listed Self Test Feature

lMulti-Color LED for Normal, Trouble or

Alarm Indication

lLow-Profile Design

lEasy Twist-In Base Design

lMade in USA at ISO 9001 Facility

lListed, ULC Listed, FM, CSFM,

NYMEA Approved

PE-11 Self Diagnostic Detector

Smoke Detectors

Cerberus Pyrotronics smoke detectors have been devel-

oped using an extensive history of fire test data. This

experience is designed into new technology products

which provide high reliability while reducing installation

cost and test time.

DI-3 Ionization Smoke Detector

lTransmitter and Receiver Installed in the

Same Housing

lEasy Alignment and Installation

lTwo-Wire Installation

lSuitable for Ranges from 17 Feet to 280 Feet

lResponse Behavior Selectable in Three

Sensitivity Settings

lHigh Immunity to Extraneous Light

lAutomatic and Comprehensive Self-Test

lOperates According to the Principle of Light-

Attenuation by Smoke

Linear Beam Smoke Detector

lAdjustable Sensitivity

lDual Chamber

lSensitivity Test Points

lSimple Twist/Lock Assembly

lOptional Auxiliary Relay

lScrew-Clamp Terminals

lAlarm LED

lListed, ULC Listed, FM, CSFM,

NYMEA Approved

Order Detector Model PBA-1191, Part No. 500-095076

Order Base Model PBB-1191, Part No. 500-095077

Order Reflector Model PBR-1191, Part No. 500-095078

Order Detector Model DI-3, Part No. 500-081806

Order Base Model DB-3S, Part No. 595-381804

The DI-3 has standardized the ionization detection principle

for over 15 years. PE-11 uses a self-test feature to eliminate

the need for special sensitivity meters. The PBA-1191

contains both transmitter and receiver in one housing to

reduce installed wiring costs. These devices satisfy any

smoke detection problem.

Order Detector Model PE-11, Part No. 500-094150

Order Base Model DB-11, Part No. 500-094151

firealarmresources.com

l25 or 70.7 VRMS Audio (Field Selected)

lTrue 100 Watts RMS Output Capacity

lUp to 11 Optional Speaker and Strobe

Circuit Modules in One Cabinet

lAll Outputs are Power Limited & Supervised

lStyle Y (Class B) and Style Z (Class A)

Speaker and Strobe Circuits

lDry Contact or polarity reversal Activation

lActivation Inputs are Fully Supervised

lOptional Digital MessageMaker is Field

Programmable

lCoded Tone Option

lBackup Evacuation Tone Option

lStand Alone or for Use with any Fire Alarm/

Suppression Control Panel

lListed, ULC Listed, CSFM, NYMEA

Approved

VoiceCom Voice/Alarm Communication System

PAD-2 Auxiliary Power Supply / NAC Extender

l6 Amps of Notification Appliance Power

lAdvanced Microprocessor Control

l24 VDC Regulated Output Voltage

lFour Power-Limited Notification Outputs

lSynchronized ANSI Temporal Pattern

lClass ‘A’ Selectable

lGround Fault Detection

lBattery Supervision

l3 Amp Auxiliary Power Output

lTrouble Contact for Monitoring

lListed

Order Model VoiceCom, Part No. 500-693713 (50 Watts)

Order Model VoiceCom-MM, Part No. 500-693714

(50 Watts with MessageMaker)

Order Model VoiceCom-L, Part No. 500-694227 (100 Watts)

Order Model PAD-2, Part No. 500-694275

Building Evacuation

The Americans with Disabilities Act has driven the need for

notification capacity in all buildings. VoiceCom Emergency

Voice/Alarm Evacuation System and the PAD-2 NAC

Extender provide for the control of notification appliances

throughout any structure. Both products can be configured

in multiple ways to meet local codes for installation as well

as for safe building evacuation.

firealarmresources.com

lS-Strobes 15, 15/75, 75 & 110

Candela Models

lSS-Strobes-Synchronized

lMTL - 8 Tone Electronic Horns

lMTLS - 8 Tone Horn Strobes

lE - Single Tone Horns

lES - Single Tone Horn Strobes

lHN - Electro-Mechanical Horn

lHNS - Electro-Mechanical Horn-

Strobes

lSM - Speakers ¼ to 2 Watt and

Speaker Strobes

lSH - High Output Speakers 1/3 to 2½

Watts and Speaker Strobes

lMeet the Americans with Disabilities

Act

lMeet UL 1971

F-Series Notification Appliances

Notification Appliances

Cerberus Pyrotronics F-Series Notification Appliances will satisfy the requirements of ADA and UL 1971 and are UL, ULC

Listed compatible with our systems. Additionally, they provide for a range of tones, audibility levels, strobe power and

synchronization of strobes to meet the needs of all types of building occupancy. F-Series devices also feature low power

consumption to minimize system demand and low in-rush duration to improve system reliability.

How to Read F-Series Signal Model Numbers

Most F-Series products follow a simple pattern as follows: the first series of letters/numbers describe the base signal class,

the second set describe the strobe if applicable, the third set describes the mounting configuration. Please refer to the

specific catalog sheet for each base signal class.

Example: MTL - S17S - FW

MTL= 8-tone multi-tone horn

MC= 3-tone horn

EC= Electronic chime

EH= Electronic horn

EW= Electronic slow-whoop

HN= Electron-mechanical horn

HNH= Electron-mechanical, high dB

MH= Mini-horn

MMT= 8-tone in mini-horn plastic

TTH= Tri-tone horn

SM25= Lo-profile 25 volt speaker

SM70= Lo-profile 70 volt speaker

SH25= High output 25 volt speaker

SH70= hHgh output 70 volt speaker

BF= Bell 4 inch

BS= Bell 6 inch

BE= Bell 8 inch

BT= Bell 10 inch

CH= Mechanical chime

S15= 15 cd strobe

S17= 15/75 cd strobe

S75= 75 cd strobe

S110= 110 cd strobe

S15S= 15 cd strobe, synchronous

S17S= 15/75 cd strobe, synchronous

S75S= 75 cd strobe, synchronous

-EP= Explosion proof

-LC= Low current draw

-SS= Single stroke

-AC= 120 VAC

-6060H= 6” x 6” horizontal

-6090V= 6” x 9” vertical

-S= Surface mount

-SW= Surface, white

-F= Flush mount

-FW= Flush, white

-C= Ceiling mount

firealarmresources.com

l8 or 16-Zone LED Display

lAnnunciates Zone Alarms, Supervisory and

Trouble Conditions

lSurface or Semi-Flush Installation

l4-Wire Connection to SXL or PXL

(Supervised)

l2 Remote Annunciators per SXL or PXL

lListed, ULC Listed, FM, CSFM,

NYMEA Approved

LED Series Remote Annunciators

5128 & 5129 Digital Alarm Communicators

l864 Listed. Meets NFPA 72 Chapter 4, for

Central Station/Remote Station Monitoring

lListed as a Slave Communicator for

Connection to System 3TM, SXL, IXL, and

MXL Fire Alarm Control Panels

lFour Fully Supervised Input Channels

lDual Phone Line Interface and Line Fault

Monitoring

lAutomatic 24 Hour Test

lReports in Eight (8) Standard Communication

Formats

lLocal Keypad Programmer/Annunciator (5230)

lRemote Programming (Up/Down Loading)

Fire System Communicators

Communication of alarm and trouble information in and out

of the protected building is critical to proper fire protection.

The LED Series annunciators provide annunciation through-

out the building in many formats to suit the building and the

fire alarm control. The 5128 and 5129 communicators

reliably carry system conditions to a central station.

Ordering Information

Model Part Number Description

LED-3 500-693062 8 Zone Serial Annunciator -

Black, SXL & PXL

LED-4 500-693317 8 Zone Serial Annunciator -

White, SXL & PXL

LED-8R 500-395661 8 Zone Annuniator - Red

LED-8B 500-395662 8 Zone Annuniator - Black

LED-8RTL 500-395663 8 Zone Annunciator - with

Lamp Test & Trouble - Red

LED-8BTL 500-395664 8 Zone Annunciator - with

Lamp Test & Trouble - Black

LED-16R 500-395665 16 Zone Annunciator - Red

LED-16B 500-395666 16 Zone Annunciator - Black

LED-16RTL 500-395663 16 Zone Annunciator - with

Lamp Test & Trouble - Red

LED-16BTL 500-395664 16 Zone Annunciator - with

Lamp Test & Trouble - Black

5128 500-693213 4 Channel Communicator -

Mounts inside FACP

5129 500-693214 4 Channel Communicator with

Enclosure

5230 500-693215 Programmer/Annunciator for

5128 & 5129

firealarmresources.com

MS Series Manual Fire Alarm Boxes

lDurable Plastic Design

lShock and Vibration Resistant

lActivation Visibly Noticeable

lOptional Contact Arrangements

lOptions Include Keyswitch or Alarm

Lamp

lNo Break Rods Necessary

lSurface or Semi-Flush Installation

lMetal Versions Available

lListed, FM and CSFM Approved

DT Series Thermal Fire Detectors

lFixed Temperatures 135°F and

200°F

lRate of Rise

lRate Compensation / Fixed

Temperature

lExplosion Proof Models Available

lWeatherproof Models Available

lListed, ULC Listed, CSFM,

NYMEA and FM Approved

Initiating Devices

Cerberus Pyrotronics supplies a wide range of manual

stations and thermal detectors to round out any installation.

Outdoor use, explosion proof environments and other

special applications can be satisfied with MS and DT series

devices

April 1997

New Issue

4/97

10M

CPY-IG

Printed in U.S.A.

Cerberus Pyrotronics

8 Ridgedale Avenue

Cedar Knolls, NJ 07927

Tel: (201) 267-1300

FAX: (201) 397-7008

Website: www.cerbpyro.com

Cerberus Pyrotronics

50 East Pearce Street

Richmond Hill, Ontario

L4B, 1B7 CN

Tel: (905) 764-8384

FAX: (905) 731-9182

firealarmresources.com