Dacomex 151283 Datasheet

Category
Networking cables
Type
Datasheet
The DACOMEX UTP Cat.6e
RJ45 cord is the best way
to make a gigabit Ethernet
network !
Ref. 151283
The DACOMEX UTP Cat.6e
RJ45 cross cord is conceived
to forward Ethernet on 4 pairs
of twisted coppers and over a
maximum length of 100
meters with RJ45 plugs at
each end (frequencies going
from 250 to 500 MHz).
www.dacomex.com
Cat.6e RJ45 cord
4 UTP pairs
Ideal for gigabit network cabling!
Feature highlights
Moulded cord
Flow from 1.000 Mbit/s to 6/7 Gigabits
2 years warranty
2 years
warranty
Ref. 151283
www.dacomex.com
Cat.6e RJ45 cord
4 UTP pairs
Ideal for gigabit network cabling!
2 years
warranty
Specifications
Moulded cord
4 interlaced strands of copper two to two
EIA/TIA 568 standard
Flow from 1.000 Mbit/s to 6/7 Gigabits
Exists in versions : 50 cm / 2,00 m / 3,00 m / 5,00 m
Réf. 151283
Features & specifications are subject to change without notification.
  • Page 1 1
  • Page 2 2

Dacomex 151283 Datasheet

Category
Networking cables
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI