www.LogiLink.eu
LogiLink
®
Cable Tester for RJ11, RJ12, RJ45
Art No. WZ0010
Features
• Testing tool for RJ11,RJ12,RJ45
• Autoscan and step-by-step testing
• Main unit with 2x RJ45 female plug
• Remote unit with 1x RJ45 female plug
• Various LEDs for status
• Powered by 1x 9 Volt block battery (not included)
• Black Zipper Bag included
Test modes:
1) Loop back: Localization of laid network of communication cable
2) Continuity: of network or communication cable
3) Open: diconnected single wires
4) Shorts: short circuited single wires
5) Miss-wire: identifi cation of non conform wire assignment
6) Pin to Pin confi guration: 1 assignment testing
/