TowSmart 1472 Installation guide

TowSmart
Brand
TowSmart
Model
1472
Type
Installation guide

This manual is also suitable for

TowSmart 1472 is a mini clearance light designed for easy installation on vehicles and trailers. It features:

  • Simple wiring with a single positive wire lead for connection to a 12-volt circuit.
  • Durable construction for long-lasting use in various weather conditions.
  • Compact size and clear lens for high visibility and functionality.
  • Easy mounting with included screws and a ground connection established through the mounting bracket.
  • Versatile use as a clearance light for enhanced visibility and safety on the road.

TowSmart 1472 is a mini clearance light designed for easy installation on vehicles and trailers. It features:

  • Simple wiring with a single positive wire lead for connection to a 12-volt circuit.
  • Durable construction for long-lasting use in various weather conditions.
  • Compact size and clear lens for high visibility and functionality.
  • Easy mounting with included screws and a ground connection established through the mounting bracket.
  • Versatile use as a clearance light for enhanced visibility and safety on the road.
®
PART #1472, 1473
READ ALL WARNINGS AND INSTRUCTIONS BEFORE INSTALLATION
WARNING: CONSULT VEHICLE AND TRAILER OWNER’S MANUAL BEFORE INSTALLATION. CHECK FOR SENSORS, WIRES, OR COMPONENTS
BEHIND THE MOUNTING SURFACE PRIOR TO INSTALLATION.
INSTALLATION INSTRUCTIONS
1. DISCONNECT VEHICLE POWER SUPPLY.
2. SELECT SUITABLE LIGHT MOUNTING LOCATION.
3. MARK THE TWO OUTSIDE MOUNTING HOLES FOR THE LIGHT BRACKET AND DRILL HOLES.
4. CONNECT THE BLACK (POSITIVE) WIRE LEAD TO THE DESIRED 12-VOLT CIRCUIT OF THE VEHICLE.
5. MOUNT THE LIGHT BRACKET TO THE VEHICLE WITH SCREWS. FOR PROPER LIGHT FUNCTION A GROUND CONNECTION MUST BE
ACHIEVED. FOR LIGHT MODELS WITH ONLY ONE WIRE, GROUND IS ESTABLISHED THROUGH THE MOUNTING BRACKET.
6. RECONNECT VEHICLE POWER SUPPLY.
7. TEST LIGHTS.
LEA TODAS LAS ADVERTENCIAS E INSTRUCCIONES ANTES DE LA INSTALACIÓN
ADVERTENCIA: CONSULTE EL MANUAL DEL PROPIETARIO DEL VEHÍCULO Y DEL REMOLQUE ANTES DE LA INSTALACIÓN. VERIFIQUE SI HAY
SENSORES, CABLES O COMPONENTES DETRÁS DE LA SUPERFICIE DE MONTAJE ANTES DE LA INSTALACIÓN.
INSTRUCCIONES DE INSTALACIÓN
1. DESCONECTE LA FUENTE DE ALIMENTACIÓN DEL VEHÍCULO.
2. ELIJA UNA UBICACIÓN ADECUADA PARA EL MONTAJE DE LA LUZ.
3. MARQUE LOS DOS ORIFICIOS EXTERIORES DE MONTAJE PARA EL SOPORTE DE LA LUZ Y TALADRE LOS ORIFICIOS.
4. CONECTE LA TERMINAL DE ALAMBRE NEGRO (POSITIVO) AL CIRCUITO DE 12 VOLTIOS DESEADO DEL VEHÍCULO.
5. MONTE EL SOPORTE DE LA LUZ AL VEHÍCULO CON LOS TORNILLOS. PARA UNA FUNCIÓN DE ILUMINACIÓN ADECUADA DEBE HABER
UNA BUENA CONEXIÓN A TIERRA. PARA LOS MODELOS DE LUCES CON UN SOLO ALAMBRE, LA TIERRA SE ESTABLECE POR MEDIO DEL
SOPORTE DE MONTAJE.
6. VUELVA A CONECTAR LA FUENTE DE ALIMENTACIÓN DEL VEHÍCULO
7. PRUEBE LAS LUCES
LISEZ TOUS LES AVERTISSEMENTS ET TOUTES LES INSTRUCTIONS AVANT L’INSTALLATION.
AVERTISSEMENT: CONSULTEZ LE MANUEL DU PROPRIÉTAIRE DU VÉHICULE ET DE LA REMORQUE AVANT L’INSTALLATION. VEILLEZ À CHER-
CHER LES CAPTEURS, LES CÂBLES OU LES COMPOSANTS DERRIÈRE LA SURFACE DE MONTAGE AVANT L’INSTALLATION.
INSTRUCTIONS POUR L’INSTALLATION
1. DÉBRANCHEZ L’ALIMENTATION ÉLECTRIQUE DU VÉHICULE.
2. CHOISISSEZ UN EMPLACEMENT APPROPRIÉ POUR LE MONTAGE DU FEU.
3. MARQUEZ LES DEUX TROUS DE MONTAGE À L’EXTÉRIEUR POUR LE SUPPORT DE FEU ET PERCEZ DES TROUS.
4. CONNECTEZ LE FIL CONDUCTEUR NOIR (POSITIF) AU CIRCUIT DE 12 VOLTS DÉSIRÉ DU VÉHICULE.
5. MONTEZ LE SUPPORT DU FEU SUR LE VÉHICULE À L’AIDE DE VIS. UNE CONNEXION À LA TERRE EST REQUISE POUR QUE LES FEUX
FONCTIONNENT CORRECTEMENT. POUR LES MODÈLES DE FEUX NE COMPORTANT QU’UN SEUL FIL, LE FIL DE TERRE PASSE DANS LE SUP-
PORT DE MONTAGE.
6. REBRANCHEZ L’ALIMENTATION ÉLECTRIQUE DU VÉHICULE.
7. VÉRIFIEZ LE FONCTIONNEMENT DES FEUX.
MINI CLEARANCE LIGHT
© 8/2017
IF YOU EXPERIENCE ANY PROBLEMS WITH YOUR TOWSMART PRODUCT DO NOT
RETURN THE UNIT TO THE RETAILER FROM WHICH IT WAS PURCHASED. INSTEAD,
PLEASE CALL 1-844-295-9216 FOR ASSISTANCE WITH ANY PROBLEMS. WARRANTY
INFORMATION IS AVAILABLE UPON REQUEST AND CAN BE FOUND ONLINE AT
TOWSMART.COM
Winston Products Company
TOWSMART.COM
WINSTON PRODUCTS, LLC.
30339 Diamond Parkway
Cleveland, OH 44139
®
© 8/2017
INSTALLATION INSTRUCTIONS
INSTRUCCIONES DE INSTALACION
CONSIGNES D’ INSTALLATION
  • Page 1 1

TowSmart 1472 Installation guide

TowSmart
Brand
TowSmart
Model
1472
Type
Installation guide
This manual is also suitable for

TowSmart 1472 is a mini clearance light designed for easy installation on vehicles and trailers. It features:

  • Simple wiring with a single positive wire lead for connection to a 12-volt circuit.
  • Durable construction for long-lasting use in various weather conditions.
  • Compact size and clear lens for high visibility and functionality.
  • Easy mounting with included screws and a ground connection established through the mounting bracket.
  • Versatile use as a clearance light for enhanced visibility and safety on the road.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents