You should have received the following parts in the package.
Please ensure that all parts are accounted for.
2 PC
A
Planter
Installation instructions
For indoor use: skip to step 2.
1. Remove plug from bottom
of the planter (A). Drill a hole in
the bottom and replace the plug
for proper drainage.
2. Place the planter (A) onto
the flat floor. Add a couple
inches of lightweight filler to the
bottom of the planter (A). This is
optional, but will reduce the
amount of potting mix soil
required. Proceed to add potting
mix soil into the planter (A).
A
Potting mix soil
3. This planter is suited for
flowers, herbs, vegetables, and
other plants.
A
SUGGESTED TOOL (NOT SUPPLIED)
Drill
Plug
A
Lightweight filler
Care and maintenance
Cleaning
• Clean with water and a soft brush.
• Do not use aggressive cleaning
agents or abrasive cleaners.
Cold weather
• We do not recommend using this
planter in temperatures below
freezing. If planter needs to
remain outside, ensure drainage
hole is free of debris to allow
snow and rain to drain off.
Storage
• Store planter upside-down in a
covered location.